Fe-Doped g-C3N4/Bi2MoO6 Heterostructured Composition with Improved Visible Photocatalytic Activity for Rhodamine B Degradation.

The binary heterostructured semiconducting visible light photocatalyst of the iron-doped graphitic carbon nitride/bismuth molybdate (Fe-g-C3N4/Bi2MoO6) composite was prepared by coupling with Fe-doped g-C3N4 and Bi2MoO6 particles. In the present study, a comparison of structural characteristics, optical properties, and photocatalytic degradation efficiency and activity between Fe-doped g-C3N4 particles, Bi2MoO6 particles, and Fe-g-C3N4/Bi2MoO6 composite was investigated. The results of X-ray diffraction (XRD) examination indicate that the hydrothermal Bi2MoO6 particles have a single orthorhombic phase and Fourier transform infrared (FTIR) spectroscopy analysis confirms the formation of Fe-doped g-C3N4. The optical bandgaps of the Fe-doped g-C3N4 and Bi2MoO6 particles are 2.74 and 2.73 eV, respectively, as estimated from the Taut plots obtained from UV-Vis diffuse reflectance spectroscopy (DRS) spectra. This characteristic indicates that the two semiconductor materials are suitable for absorbing visible light. The transmission electron microscopy (TEM) micrograph reveals the formation of the heterojunction Fe-g-C3N4/Bi2MoO6 composite. The results of photocatalytic degradation revealed that the developed Fe-g-C3N4/Bi2MoO6 composite photocatalyst exhibited significantly better photodegradation performance than the other two single semiconductor photocatalysts. This property can be attributed to the heterostructured nanostructure, which could effectively prevent the recombination of photogenerated carriers (electron-hole pairs) and enhance photocatalytic activity. Furthermore, cycling test showed that the Fe-g-C3N4/Bi2MoO6 heterostructured photocatalyst exhibited good reproducibility and stability for organic dye photodegradation.

Performance Enhancement of Electrochemiluminescence with the Immunosensor Controlled Using Magnetized Masks for the Determination of Epithelial Cancer Biomarker EpCAM.

The performance of an electrochemiluminescence (ECL) immunosensor was improved with a particle gradient. SiO2-coated magnetic beads were adopted as nanocarriers for gradient manipulation and immobilized with the primary antibody. Cadmium telluride quantum dots were coated with a layer of protein G for conjugation and orientation of the secondary antibody as signal labels. ECL immunosensor gradients on the electrode were formed by magnetolithography (ML) with magnetized nickel masks of column and stripe arrays. The immunosensor generally aggregated as an island on the substrate, leading to a decrease of efficiency in the characteristic signals. Stripe arrays of magnetized nickel were designed to generate cylindrical magnetic flux on the substrate to improve the particle manipulation with the gradient. Various gradients of the sandwich-structured immunosensor substantially affected the electrochemical performance. Compared to the gradient-free immunosensor, the gradient of the immunosensor generated by ML using a 3 µm stripe array mask enhanced the ECL intensity ∼2.2 times. The results of quantification of epithelial cell adhesion molecules (EpCAM) with the gradient immunosensor showed a broad linear range (15-420 pg mL-1), a low limit of detection (5.5 pg mL-1), and high reliability for EpCAM-spiked serum samples, indicating that the immunosensor gradient substantially enhances the performance of the ECL assay.

Optical assay of trypsin using a one-dimensional plasmonic grating of gelatin-modified poly(methacrylic acid).

The geometry of resonant absorbers (RA) is varied by tryptic digestion to design a probe platform. The process includes fabrication of a line array of poly(methacrylic acid) (PMAA) brush as an RA, tailed by the immobilization of gelatin. The gelatin-modified PMAA RA is a kind of one-dimensional plasmonic grating, possessing an optical feature with a characteristic absorption peak. The growth of gelatin on PMAA RA resulted in a blue shift of the absorption peak from 465 to 263 nm. Trypsin catalyzes the hydrolysis of peptide bonds, breaking down gelatin into smaller peptides causing the change in geometry of RA. The gelatin of RA was digested in a wide linear range of activity of trypsin from 34 to 1088 U mL-1 resulting in a red shift of the absorption peak of RA from 263 to 474 nm within 10 min. The limit of detection achieved is 11 U mL-1 with ca. 1.9% standard deviation and 101.4% recovery of spiked serum samples. The chemical selectivity of the trypsin assay is evidenced by motoring the changes in a shift of the absorption peak of gelatin-modified PMAA RA using chymotrypsin and horseradish peroxidase. Graphical abstract Schematic representation of synthesis route of 1D gelatin grating on silicon surface for trypsin probing.

Progress in the Preparation of Functional and (Bio)Degradable Polymers via Living Polymerizations.

This review presents the latest developments in (bio)degradable approaches and functional aliphatic polyesters and polycarbonates prepared by typical ring-opening polymerization (ROP) of lactones and trimethylene carbonates. It also considers several recent innovative synthetic methods including radical ring-opening polymerization (RROP), atom transfer radical polyaddition (ATRPA), and simultaneous chain- and step-growth radical polymerization (SCSRP) that produce aliphatic polyesters. With regard to (bio)degradable approaches, we have summarized several representative cleavable linkages that make it possible to obtain cleavable polymers. In the section on functional aliphatic polyesters, we explore the syntheses of specific functional lactones, which can be performed by ring-opening copolymerization of typical lactone/lactide monomers. Last but not the least, in the recent innovative methods section, three interesting synthetic methodologies, RROP, ATRPA, and SCSRP are discussed in detail with regard to their reaction mechanisms and polymer functionalities.

Influence of imidazolium based green solvents on volume phase transition temperature of crosslinked poly(N-isopropylacrylamide-co-acrylic acid) hydrogel.

The volume phase transition temperature (VPTT) of crosslinked poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAM-co-AA) hydrogel in water in the presence of five imidazolium based ionic liquids (ILs) was studied. The VPTT of PNIPAM-co-AA hydrogel can be modulated to different extents by the addition of different amounts of ILs. The modulations in VPTT values can be attributed to the IL-induced alterations in hydrophobic, hydrophilic and hydrogen bonding interactions of PNIPAM-co-AA hydrogel with the neighboring solvent and molecular chains. The influence of ILs having a common cation, 1-butyl-3-methylimidazolium cation ([Bmim]) and different anions, such as iodide (I-), tetrafluoroborate (BF4-), chloride (Cl-), acetate (CH3COO-) and hydrogen sulfate (HSO4-), on the phase transition of PNIPAM-co-AA hydrogel was monitored by the aid of differential scanning calorimetry (DSC), dynamic light scattering (DLS) and Fourier transform infrared (FT-IR) spectroscopy. Furthermore, the interfacial properties between aqueous IL and polymer surface were scrutinized with the help of contact angle (CA) measurements. The overall specific ranking of ILs in preserving the hydration layer around the PNIPAM-co-AA hydrogel in water was [Bmim][I]>[Bmim][BF4]>[Bmim][Cl]>[Bmim][Ac]>[Bmim][HSO4]. The trend of these ILs followed the well-known Hofmeister series. Interestingly, the PNIPAM-co-AA hydrogel in water shows abnormal salting-out property in the presence of [Bmim][BF4] at higher concentration and this abnormal behavior can be explained based on the lack of sufficient binding sites on the macromolecule for higher number of [Bmim][BF4] at a higher concentration.

Highly bright broadband red light produced by fluorescence polymer/InGaN hybrid light-emitting diodes.

The fabrication of fluorescence polymer/InGaN hybrid light-emitting diodes (LEDs) that emit highly bright broadband red light is presented in this Letter. The absorption peak of the fluorescence polymer was 455 nm, and the emission peak was 640 nm. The light output power and external quantum efficiency of hybrid LEDs at a driving current of 100 mA were 46.6 mW and 24.1%, respectively. The emission spectrum of hybrid LEDs was located at a wavelength of 641 nm, with a broadband FWHM of 106 nm. Thus this study offers potential methods for enhancing the output power of commercial white-light-emitting devices.

Ultraviolet-durable superhydrophobic zinc oxide-coated mesh films for surface and underwater-oil capture and transportation.

In this paper, we report a simple and an inexpensive method for fabricating superhydrophobic/superoleophilic mesh films from microstructured ZnO coatings. The microstructured ZnO coatings, which do not contain any fluorinated compounds, maintain their superhydrophobicity and superoleophilicity after ultraviolet irradiation and display environmental stability. Furthermore, those microstructured ZnO-coated mesh films exhibit good selectivity (even underwater) and excellent recyclability, making them promising candidates for many potential applications, including liquid-liquid separation, water treatment, and liquid transportation.

Recent Advances in Synthesis, Modification, Characterization, and Applications of Carbon Dots.

Although there is significant progress in the research of carbon dots (CDs), some challenges such as difficulty in large-scale synthesis, complicated purification, low quantum yield, ambiguity in structure-property correlation, electronic structures, and photophysics are still major obstacles that hinder the commercial use of CDs. Recent advances in synthesis, modification, characterization, and applications of CDs are summarized in this review. We illustrate some examples to correlate process parameters, structures, compositions, properties, and performances of CDs-based materials. The advances in the synthesis approach, purification methods, and modification/doping methods for the synthesis of CDs are also presented. Moreover, some examples of the kilogram-scale fabrication of CDs are given. The properties and performance of CDs can be tuned by some synthesis parameters, such as the incubation time and precursor ratio, the laser pulse width, and the average molar mass of the polymeric precursor. Surface passivation also has a significant influence on the particle sizes of CDs. Moreover, some factors affect the properties and performance of CDs, such as the polarity-sensitive fluorescence effect and concentration-dependent multicolor luminescence, together with the size and surface states of CDs. The synchrotron near-edge X-ray absorption fine structure (NEXAFS) test has been proved to be a useful tool to explore the correlation among structural features, photophysics, and emission performance of CDs. Recent advances of CDs in bioimaging, sensing, therapy, energy, fertilizer, separation, security authentication, food packing, flame retardant, and co-catalyst for environmental remediation applications were reviewed in this article. Furthermore, the roles of CDs, doped CDs, and their composites in these applications were also demonstrated.

A dimedone-phenylalanine-based fluorescent sensor for the detection of iron (III), copper (II), L-cysteine, and L-tryptophan in solution and pharmaceutical samples.

The development of fluorescence molecules for the fast and effective detection of L-tryptophan (L-Trp) has attracted a lot of attention because it is an important amino acid for baby growth, nitrogen equilibrium in adults, improving sleep, and mood regulation. A dimedone-phenylalanine-based chiral sensor (SDPA) was synthesized and exhibited a strong fluorescence quenching by Fe3+ and Cu2+ in a water/DMSO (3/7) solution with a detection limit of 2.29 × 10-6 M and 6.37 × 10-6 M, respectively. The factors affecting fluorescence sensings, such as the pH and competing cations, were studied. The sensor can be reused at least five times after being treated with EDTA. The Job plot, ESI-MS spectra, 1H NMR spectra, absorbance, and fluorescence titration experiments were investigated to study the mechanism of SDPA-Fe3+ and SDPA-Cu2+ complexation. The SDPA-Cu2+ complex can detect L-tryptophan and L-cysteine at trace levels by turn-on fluorescence with a detection limit of 9.35 × 10-6 M and 8.86 × 10-6 M, respectively. Moreover, applying the SDPA-Cu2+ complex for quantitative analysis of L-tryptophan in real sleep-improving capsules resulted in good recovery. The L-tryptophan level of the Elining capsule was determined at 190.8 ± 10.5 mg/g (mg L-tryptophan/g medicine), which is close to the announced quantity of 180 mg/g. Besides, the SDPA-Cu2+ complex can selectively detect free L-Try molecules and L-Try residues in proteins.

Metal Complex/ZnS-Modified Ni Foam as Magnetically Stirrable Photocatalysts: Roles of Redox Mediators and Carrier Dynamics Monitored by Operando Synchrotron X-ray Spectroscopy.

Magnetically stirrable photocatalysts binding the ZnS-decorated Ni foam with the metal complex cocatalyst as a redox mediator and light-absorbing composition were investigated. Loading metal complex can improve light absorption, surface hydrophilicity, interfacial charge migration, and H2 production activity. The variation of the metal valences of the composite photocatalysts in an operando environment (with sacrificial agent solution) with and without light irradiation was investigated by X-ray absorption near-edge structure (XANES) spectra and Fourier-transformed extended X-ray absorption fine structure (EXAFS) spectra to monitor the charge carrier dynamics of photocatalysis and explain how the macrocyclic Cu complex (CuC) acted as a redox mediator better than the Ni complex. The smaller valence difference of copper valence in ZS/CuC for dark and light states revealed that the Cu complex facilitates a reversible electron transfer between the ZnS photocatalyst and H+. Loading the Cu complex can improve the separation of photogenerated carriers by the redox couple of complexes, leading to a significantly improved photocatalytic H2 production activity of 8150 µmol h-1 g-1. The reactants can flow through these magnetically stirrable Ni foam-based photocatalysts by magnetic-field-driven stirring, which improves the contact between photocatalysts and the sacrificial agents. The operando synchrotron provides new insights for understanding the roles of redox mediators.

Bioconjugated fluorescent polymeric nanoparticles for imaging and targeted therapy of HER2-overexpressing cancer cells.

We report the development of Herceptin-conjugated fluorescent polymeric nanoparticles (PNp) probes. Synthesis of fluorescent conjugated polymer as the core, preparation of the core/shell PNp, the ability of immobilizing Herceptin on PNp, targeting and imaging of bioconjugated PNp toward HER2-overexpressing cancer cells, and therapeutic effect on cell cycle, together with the expression of apoptosis related proteins, were investigated. We have achieved active tumor targeting by rapid PNp-antibody binding to tumor-specific antigens. Besides, Herceptin-conjugated PNp can suppress the growth of HER2-overexpressing cancer cells.

Facile Molecular Weight Determination of Polymer Brushes Grafted from One-Dimensional Diffraction Grating by SI-ATRP Using Reflective Laser System.

Gelatin was immobilized selectively on the amide groups-modified bottom of a trench array of a photoresist template with 2 µm resolution by the ethyl(dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide reaction. The gelatin-immobilized line array was brominated to generate a macroinitiator for atom transfer radical polymerization. Poly(methacrylic acid) (PMAA) brushes were grafted from the macroinitiator layer as line arrays of one-dimensional diffraction gratings (DGs) for various grafting polymerization times. A laser beam system was employed to analyze the optical feature with a characteristic diffraction effect of the PMAA DGs at a 45° incident angle along the transverse magnetic and transverse electric polarization. The growth of the PMAA brush lines increased both their heights and widths, leading to a change in the reflective diffraction intensity. The PMAA brushes under various grafting polymerization times were cleaved from the substrate by digestion of gelatin with trypsin, and their molecular weights were obtained by gel permeation chromatography. The change degree of the diffraction intensity varied linearly with the molecular weight of the PMAA brushes over a wide range, from 135 to 1475 kDa, with high correlation coefficients. Molecular weight determination of polymer brushes using the reflective diffraction intensity provides a simple method to monitor their growth in real time without polymer brush cleavage.

Polydopamine-Bi2WO6-Decorated Gauzes as Dual-Functional Membranes for Solar Steam Generation and Photocatalytic Degradation Applications.

The dual-functional Bi2WO6/polydopamine (PDA)-modified gauze membrane has been developed for applications in photocatalytic degradation and solar steam generation. Two types of membrane were prepared by changing the growth sequence of Bi2WO6 nanomaterials and PDA on gauze substrates. The spatial distribution of Bi2WO6 and polydopamine has a great influence on light absorption, photocatalytic degradation, and solar steam generation performances. Bi2WO6 photocatalysts can absorb short-wavelength light for the photocatalytic decoloration of organic dyes. The photothermal polydopamine can convert light into heat for water evaporation. Besides, the gauze substrate provides water transport channels to facilitate water evaporation. The morphology, surface chemistry, and optical properties of Bi2WO6-PDA modified gauzes were characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and diffuse reflectance spectra. The photothermal properties, wetting properties, and solar steam generation rates of the composite films were also studied. Degradation of 96% of indigo carmine was achieved after being irradiated for 120 min in the presence of G/PDA/BWNP. The water evaporation rates of the G/BWP/PDA sample under the irradiation of an Xe lamp (light intensity = 1000 W/m2) reached 1.94 kg·m-2·h-1.

Naked-eye colorimetric and turn-on fluorescent Schiff base sensor for cyanide and aluminum (III) detection in food samples and cell imaging applications.

A new efficient Schiff base sensor SB3 for fluorescent and colorimetric "naked-eye" "turn-on" sensing of cyanide anion (CN-) with excellent sensitivity and selectivity was developed. The 4,4'-(perfluoropropane-2,2-diyl)bisphenol group and two phenyl groups were covalently linked by two C = N bonds to extend the conjugation length. The four hydroxyl groups can improve the water solubility of the SB3 sensor. The SB3 sensor exhibited high specificity towards CN- by interrupting its intramolecular charge transfer, resulting in a color change and remarkable "turn-on" green fluorescence emission. The sensing mechanism is caused by the nucleophilic addition of CN- toward imine groups of the SB3 sensor, leading to breaks of the conjugation, fluorescent spectral changes, and color change. It was confirmed by 1H NMR titration and Mass spectra. The detection limits for CN- and Al3+obtained by fluorescence spectrum are 0.80 µM and 0.25 µM, respectively. The SB3 sensor can act as an efficient chemical sensor for detecting the CN- and Al3+ ions under common environmental and physiological conditions (pH 5-12). Besides, the sensor can also detect CN- in food materials (such as sprouting potatoes and cassava flour) and imaging CN-in living cells with strong "turn-on" fluorescence at 490 nm. SB3 is an excellent CN- sensor that exhibits some advantages, including easy synthesis, distinct fluorescence and color change, high selectivity, low detection limit, and good anti-interference ability to analyze solution and food samples, together with fluorescence cell imaging.

An aniline trimer-based multifunctional sensor for colorimetric Fe3+, Cu2+ and Ag+ detection, and its complex for fluorescent sensing of L-tryptophan.

The detection of metal ions and amino acids by the aniline oligomer-based receptor has not been reported yet, to the best of our knowledge. In this study, an efficient multifunctional cation-amino acid sensor (CAS) with aniline moiety and chiral thiourea binding site was synthesized by the reaction of aniline trimer and (S)-(+)-1-phenyl ethyl isothiocyanate. CAS can sense Fe3+, Cu2+, Ag+ ions, and L-tryptophan. These results can be recognized by the naked eye. The appropriate pH range for the quantitative analysis of Fe3+, Cu2+, and Ag+ by CAS in DMSO/water (30 vol% water) was evaluated. The interaction between CCS and metal ions was analyzed by 1H NMR titration. The detection limits of CAS for the Cu2+, Ag+, and Fe3+ were 0.214, 0.099, and 0.147 µM, respectively. Moreover, the CASCu2+ complex can act as a turn-on fluorescence sensor for L-tryptophan. On the contrary, there is no response upon the addition of other amino acids, such as L-histidine, L-proline, L-phenylalanine, L-threonine, L-methionine, L-tyrosine, and L-cystine to CASCu2+ complex.

Wettability control of micropore-array films by altering the surface nanostructures.

By controlling the surface nanostructure, the wettability of films with similar pore-array microstructure can be tuned from hydrophilic to nearly superhydrophobic without variation of the chemical composition. PA1 pore-array film consisting of the horizontal ZnO nanosheets was nearly superhydrophobic. PA2 pore-array film consisting of growth-hindered vertically-aligned ZnO nanorods was hydrophilic. The influences of the nanostructure shape, orientation and the micropore size on the contact angle of the PA1 films were studied. This study provides a new approach to control the wettability of films with similar pore-array structure at the micro-scale by changing their surface nanostructure. PA1 films exhibited irradiation induced reversible wettability transition. The feasibility of creating a wetted radial pattern by selective UV irradiation of PA1 film through a mask with radial pattern and water vapor condensation was also evaluated.

Thermo-Tunable Pores and Antibiotic Gating Properties of Bovine Skin Gelatin Gels Prepared with Poly(n-isopropylacrylamide) Network.

Polystyrene nanospheres (PNs) were embedded in bovine skin gelatin gels with a poly(N-isopropylacrylamide) (PNIPAAm) network, which were denoted as NGHHs, to generate thermoresponsive behavior. When 265 nm PNs were exploited to generate the pores, bovine skin gelatin extended to completely occupy the pores left by PNs below the lower critical solution temperature (LCST), forming a pore-less structure. Contrarily, above the LCST, the collapse of hydrogen bonding between bovine skin gelatin and PNIPAAm occurred, resulting in pores in the NGHH. The behavior of pore closing and opening below and above the LCST, respectively, indicates the excellent drug gating efficiency. Amoxicillin (AMX) was loaded into the NGHHs as smart antibiotic gating due to the pore closing and opening behavior. Accordingly, E. coli. and S. aureus were exploited to test the bacteria inhibition ratio (BIR) of the AMX-loaded NGHHs. BIRs of NGHH without pores were 48% to 46.7% at 25 and 37 °C, respectively, for E. coli during 12 h of incubation time. The BIRs of nanoporous NGHH could be enhanced from 61.5% to 90.4% providing a smart antibiotic gate of bovine skin gelatin gels against inflammation from infection or injury inflammation.

Polymer/BiOBr-Modified Gauze as a Dual-Functional Membrane for Heavy Metal Removal and Photocatalytic Dye Decolorization.

It is crucial to remove heavy metals and dyes before discharging industrial effluents. Gauze substrate was surface-modified by coating with a polymeric adsorbent and a spray coating of BiOBr photocatalyst to develop a novel dual-functional membrane, polymer/BiOBr-modified gauze, for water remediation. The polymeric adsorbent was crosslinked to prevent the dissolving of the adsorbent during operation in contaminated water. The morphology and surface chemistry of the modified gauze were characterized before and after the adsorption of Ni2+. The surface wettability, isotherms, and kinetics of Ni2+ adsorption were studied. We also studied the effect of pH, initial Ni2+ concentration, monomer molar ratio, and monomer chemical structure on the Ni2+ adsorption capacity. To achieve a high Ni2+ adsorption capacity and good photocatalytic decolorization activity, the amount of decorated BiOBr was tuned by changing the spray-coating time to optimize the exposed BiOBr and polymer on the surface. The optimized dual-functional membrane PB20 possesses excellent adsorption capacity (650 mg g-1) for Ni2+ ions and photocatalytic decolorization activity (100% degradation of RhB within 7 min). Decorating the optimized amount of BiOBr on the surface can introduce photocatalytic decolorization activity without sacrificing the adsorption capacity for Ni2+.

Preparation of biofiltration membranes by coating electrospun polyacrylonitrile fiber membranes with layer-by-layer supermolecular polyelectrolyte films.

Electrospun polyacrylonitrile fiber membranes (EPFMs) were coated with multilayer films, assembled using the layer-by-layer (LbL) technique through the alternate deposition of poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA), to develop an antithrombogenic drug release membrane for hemodialysis. Methylene blue (MB) and heparin (HEP) were attached to the PAH and PAA multilayers, respectively, as model drug and antithrombogenic agent to investigate the dual functionality of the membranes. The positively (PAH, MB) and negatively (PAA, HEP) charged groups generated a supermolecular polyelectrolyte multilayer film (SPF) capable of loading high amounts of MB and HEP on the EPFMs at appropriate composition. The pH was fixed at 5.5 during assembly to stabilize the SPF. Heavy assembly of the PAH/PAA multilayer occurred at 10 wt% of both MB and HEP with 25 cycles of LbL deposition, and it exhibited long-term release of MB and low release of HEP at pH 7.4 in a circulatory system. The SPF-coated EPFMs also achieved low platelet attachment after 4 h of platelet rich plasma circulation and showed prolonged clotting times including thromboplastin, thrombin, and prothrombin times. Collectively, these observations suggest that SPF-coated EPFMs have great potential for use as hemodialysis membranes with positively charged drug loading.

Electrorheological Sensor Encapsulating Microsphere Media for Plague Diagnosis with Rapid Visualization.

Plague is a disease infected by an etiological agent, which is transmitted from fleas to a variety of wildlife rodents. Therefore, rapid diagnosis of plague on-site in the field is important. Polystyrene microspheres (SMs) of 2.2 µm diameter were synthesized by emulsion polymerization to adsorb magnetic nanoparticles (FNs), resulting in core-/shell-structured microspheres that generate a significant contrast in relative permittivities between SMs and FNs. Electrorheological displays (EDs) consisting of two indium tin oxide glasses with spacers were constructed to contain core-/shell-structured SM/FN (SM@FN) solutions for observing their transmittance change. The ED encapsulating dispersed SM@FN solution exhibited an opaque state because light was scattered significantly without the application of an alternating electric field (AEF). In the presence of an AEF, the particle chaining behavior results in enhancement of the transmittance of ED. At a specific frequency, the so-called characteristic frequency (Fc), the transmittance reaches a maximum. Fc could be used as an indicator to mark the shell materials. The antibody of Yersinia pestis (ab-Yp) was coated onto the SM@FN as a biosensing medium. The Fc of ab-Yp-modified microspheres shifted from 200 to 750 kHz with antigen coupling of Y. pestis antigen (ag-Yp). In the absence of fluorescence labeling, the large change in ED transmittance could be visualized during the Y. pestis detection. The limit of detection and the limit of quantification were ∼30 and ∼40 ng/µL, respectively, obtained within 30 s according to the highest transmittance of ED under the AEF at 750 kHz. Y. pestis detection was not affected by Escherichia coli and Staphylococcus aureus significantly. Compared with other common immunoassays, including the secondary immunochemical or enzyme-linked steps, this simple electrorheological sensor with high sensitivity and selectivity could be a candidate for on-site plague diagnosis.