ChIP-seq and RNA-seq Reveal the Involvement of Histone Lactylation Modification in Gestational Diabetes Mellitus.

Lactylation is a novel post-translational modification of proteins. Although the histone lactylation modification has been reported to be involved in glucose metabolism, its role and molecular pathways in gestational diabetes mellitus (GDM) are still unclear. This study aims to elucidate the histone lactylation modification landscapes of GDM patients and explore lactylation-modification-related genes involved in GDM. We employed a combination of RNA-seq analysis and chromatin immunoprecipitation sequencing (ChIP-seq) analysis to identify upregulated differentially expressed genes (DEGs) with hyperhistone lactylation modification in GDM. We demonstrated that the levels of lactate and histone lactylation were significantly elevated in GDM patients. DEGs were involved in diabetes-related pathways, such as the PI3K-Akt signaling pathway, Jak-STAT signaling pathway, and mTOR signaling pathway. ChIP-seq analysis indicated that histone lactylation modification in the promoter regions of the GDM group was significantly changed. By integrating the results of RNA-seq and ChIP-seq analysis, we found that CACNA2D1 is a key gene for histone lactylation modification and is involved in the progression of GDM by promoting cell vitality and proliferation. In conclusion, we identified the key gene CACNA2D1, which upregulated and exhibited hypermodification of histone lactylation in GDM. These findings establish a theoretical groundwork for the targeted therapy of GDM.

Salting-Out of DNA Origami Nanostructures by Ammonium Sulfate.

DNA origami technology enables the folding of DNA strands into complex nanoscale shapes whose properties and interactions with molecular species often deviate significantly from that of genomic DNA. Here, we investigate the salting-out of different DNA origami shapes by the kosmotropic salt ammonium sulfate that is routinely employed in protein precipitation. We find that centrifugation in the presence of 3 M ammonium sulfate results in notable precipitation of DNA origami nanostructures but not of double-stranded genomic DNA. The precipitated DNA origami nanostructures can be resuspended in ammonium sulfate-free buffer without apparent formation of aggregates or loss of structural integrity. Even though quasi-1D six-helix bundle DNA origami are slightly less susceptible toward salting-out than more compact DNA origami triangles and 24-helix bundles, precipitation and recovery yields appear to be mostly independent of DNA origami shape and superstructure. Exploiting the specificity of ammonium sulfate salting-out for DNA origami nanostructures, we further apply this method to separate DNA origami triangles from genomic DNA fragments in a complex mixture. Our results thus demonstrate the possibility of concentrating and purifying DNA origami nanostructures by ammonium sulfate-induced salting-out.

Highly Selective CO2 Electroreduction to CH4 by In†Situ Generated Cu2 O Single-Type Sites on a Conductive MOF: Stabilizing Key Intermediates with Hydrogen Bonding.

It is still a great challenge to achieve high selectivity of CH4 in CO2 electroreduction reactions (CO2 RR) because of the similar reduction potentials of possible products and the sluggish kinetics for CO2 activation. Stabilizing key reaction intermediates by single type of active sites supported on porous conductive material is crucial to achieve high selectivity for single product such as CH4 . Here, Cu2 O(111) quantum dots with an average size of 3.5 nm are in situ synthesized on a porous conductive copper-based metal-organic framework (CuHHTP), exhibiting high selectivity of 73 % towards CH4 with partial current density of 10.8 mA cm-2 at -1.4 V vs. RHE (reversible hydrogen electrode) in CO2 RR. Operando infrared spectroscopy and DFT calculations reveal that the key intermediates (such as *CH2 O and *OCH3 ) involved in the pathway of CH4 formation are stabilized by the single active Cu2 O(111) and hydrogen bonding, thus generating CH4 instead of CO.

A Novel One-Dimensional Porphyrin-Based Covalent Organic Framework.

A novel one-dimensional covalent organic framework (COF-K) was firstly designed and synthesized through a Schiff-based reaction from a porphyrin building block and a nonlinear right-angle building block. The COF-K exhibited high BET surface area and narrow pore size of 1.25 nm and gave a CO2 adsorption capacity of 89 mg g-1 at 273K and 1bar.

N-Doped Mesoporous In2 O3 for Photocatalytic Oxygen Evolution from the In-based Metal-Organic Frameworks.

As an excellent n-type semiconductor, indium oxide (In2 O3 ) is also a good candidate for photocatalysis such as light-induced water splitting. However, the efficiency of the oxygen evolution reaction (OER) underperforms in view of the wide band gap (BG) and fast charge recombination in In2 O3 . N-doping provides a sound method to narrow the BG and to prohibit the charge recombination by forming new energy levels between the valence band (VB) and the conduction band (CB). In this work, an In-based organic framework sod-ZMOF was used as a precursor to prepare the N-doped In2 O3 . After calcination, sod-ZMOF is transformed into N-doped In2 O3 nanocrystalline, in which the ligand within sod-ZMOF serves as the nitrogen source. In addition, sod-ZMOF acts as self-template during calcination to generate abundant nanopores within the In2 O3 frameworks, providing large specific surface area and active sites for OER. The BG is narrowed to 2.9 from 3.7 eV of the pure In2 O3 on account of the N-doping. N species are doped in both the substitutional and interstitial fashion, and the interstitial doping is believed to improve the photo-induced carrier separation by the formation of oxygen vacancies. As a consequence, the overpotential for OER is effectively decreased from the pure In2 O3 , and the electrocatalytic experiment proves superior catalytic activity with a high current density and long-term durability compared to the In2 O3 nanoparticles obtained from In(OH)3 .

Carbon monoxide oxidation catalysed by defective palladium chloride: DFT calculations, EXAFS, and in situ DRIRS measurements.

We examined the potential catalytic role of the palladium chloride catalyst in CO oxidation using density functional theory and experimental investigations. The active plane of the palladium chloride catalyst is identified as (140). We found that the defective PdCl2(140) surface is able to facilitate the activation of O2 and subsequently promote the oxidation of CO. The most significant reaction channel, the Eley-Rideal mechanism (MER1), proceeds first by a peroxo-type (OOCO) intermediate formation, second by O adsorption with the first CO2 release, then by the second CO attraction and the second CO2 formation, and finally by the second CO2 desorption and restoration of the defective PdCl2(140) surface. The rate-determining step is the formation of the second CO2 in the whole catalytic cycle. Compared to the previously reported catalytic systems, the reaction activation barrier (0.54 eV) of CO oxidation in the PdCl2 catalyst is low, indicating PdCl2 as a potential high-performance catalyst for CO oxidation. The present results enrich our understanding of CO oxidation of Pd-based catalysts and provide a basis for fabricating Pd-based catalysts with high activity.

Insights into the reaction mechanism of CO oxidative coupling to dimethyl oxalate over palladium: a combined DFT and IR study.

Oxidative coupling of toxic pollutant CO to form the platform raw chemical material dimethyl oxalate (DMO) has been industrialized however the catalytic mechanism has been unknown so far. The reaction mechanism of CO oxidative coupling to form DMO on a Pd(111) surface has been investigated using density functional theory (DFT) and in situ diffuse reflectance infrared (DRIR) spectroscopy. DFT calculations and in situ DRIRS measurements indicate that two co-adsorbed intermediates COOMe and OCCO, initiate the reaction. C-C coupling occurs earlier due to a low coupling barrier and small steric hindrance. The results also suggest that Pd(111) is selective towards DMO over DMC, and that CO pre-adsorption and CO in excess effectively enhance the yield of DMO. The microscopic elucidation of this important reaction suggests improvements in coal-to-EG (CTEG) production which can be applied in practice to effectively enhance the yield and reduce the cost. The results may help with further fine-tuning and designing of high-efficient noble metal catalysts.

Polycatenation-driven self-assembly of nanoporous frameworks based on a 1D ribbon of rings: regular structural evolution, interpenetration transformation, and photochemical modification.

A series of nanoporous frameworks constructed by a polycatenated isoreticular 1D ribbon of rings have been developed. The orientation of catenated ribbons can be fine tuned by varying counter anions, which allows both pore size and shape to be systematically adjusted in a pre-synthetic process. Distinct from conventional pore construction modes in which the organic linkers are alternately connected by metal nodes into a 3D periodic arrangement, the present polycatenation approach represents an alternative for constructing soft porous materials with tunable pore metrics and functions. Furthermore, these porous structures can interconvert into each other based on an anion-exchange process, accompanied by the transformation of the interpenetrating structures in different dimensional networks, which is unusual in porous frameworks. In addition, such a porous framework can be post-synthetically modified by a photoinduced [2+2] cycloaddition reaction, which not only achieves the surface modification (from conjugated to non-conjugated inner surface), but also triggers the structural transformation from low dimension to high dimension. Such a post-modification process reinforces the pore architecture through a covalent locking effect and has a great impact on the adsorption properties.

Point-of-care diagnosis of pre-eclampsia based on microfiber Bragg grating biosensor.

Pre-eclampsia is a serious multi-organ complication that severely threatens the safety of pregnant women and infants. To accurate and timely diagnose pre-eclampsia, point-of-care (POC) biosensing of the specific biomarkers is urgently required. However, one of the key biomarkers of pre-eclampsia, placental growth factor (PlGF), has a reduced level of expression in patients, which challenges the quantification capability and Limit-of-detection (LOD) of biosensors. Herein, we reported a microfiber Bragg grating biosensor for the quantification of PlGF in clinical serum samples. The Bragg grating was inscribed in a unilateral tapered fiber to generate the segmented Fabry-Perot spectrum for improving the capability of detection. Furthermore, a temperature-calibrated Bragg grating was added to enable dual parametric detection of PlGF and temperature simultaneously for removing the crosstalk. Finally, the biosensor was envisaged to be perfectly compatible with microfluidic chips, and thus dramatically reducing the sample consumption to as small as 10 µL. The proposed biosensor can respond to PlGF with concentrations ranging from 5 to 120 pg mL-1, attaining a LOD of 5 pg mL-1 of clinical relevance. More importantly, the biosensor achieved micro volume detection of clinical serum samples from patients, and the ROC curve with an AUC of 0.977 confirmed the viability of the device. Our study paves the way to a new idea for cost-effective and high-precision screening of patients with pre-eclampsia, and hence envisages a promising prospect for point-of-care (POC) diagnosis of patients with pre-eclampsia.

Borromean-entanglement-driven assembly of porous molecular architectures with anion-modified pore space.

A series of metal-organic frameworks based on a flexible, highly charged Bpybc ligand, namely 1⋅Mn⊃OH(-), 2⋅Mn⊃SO(4)(2-), 3⋅Mn⊃bdc(2-), 4⋅Eu⊃SO(4)(2-) (H(2)BpybcCl(2) = 1,1'-bis(4-carboxybenzyl)-4,4'-bipyridinium dichloride, H(2)bdc = 1,4-benzenedicarboxylic acid) have been obtained by a self-assembly process. Single-crystal X-ray-diffraction analysis revealed that all of these compounds contained the same n-fold 2D→3D Borromean-entangled topology with irregular butterfly-like pore channels that were parallel to the Borromean sheets. These structures were highly tolerant towards various metal ions (from divalent transition metals to trivalent lanthanide ions) and anion species (from small inorganic anions to bulky organic anions), which demonstrated the superstability of these Borromean linkages. This non-interpenetrated entanglement represents a new way of increasing the stability of the porous frameworks. The introduction of bipyridinium molecules into the porous frameworks led to the formation of cationic surface, which showed high affinities to methanol and water vapor. The distinct adsorption and desorption isotherms of methanol vapor in four complexes revealed that the accommodated anion species (of different size, shape, and location) provided a unique platform to tune the environment of the pore space. Measurements of the adsorption of various organic vapors onto framework 1⋅Mn⊃OH(-) further revealed that these pores have a high adsorption selectivity towards molecules with different sizes, polarities, or π-conjugated structures.

A-Site Substitute for Fabricating All-Inorganic Perovskite CsPbCl3 with Application in Self-Powered Ultraviolet Photodetectors.

Because of its stable chemical properties and wide band gap, CsPbCl3 perovskite has shown great application prospects in ultraviolet photodetectors (UPDs). However, the poor solubility of CsCl in organic solvents impedes the fabrication of high-quality CsPbCl3 films. Herein, we introduced an A-site substitute route for fabricating a high-quality CsPbCl3 microcrystalline (MC) film by spin-coating cesium acetate on a MAPbCl3 MC film followed by a high-temperature annealing process. To enhance the device performance of the FTO/SnO2/CsPbCl3 MCs/carbon structure UPD, a pressure-assisted annealing strategy was carried out, which reduced the void density and surface roughness of the microcrystal film. Finally, our optimized PDs showed high device performances with an on/off ratio of 6 × 104, a responsivity of 0.13 A W-1, a detectivity of as high as 1.07 × 1012 Jones, and a rise/fall time of 10/24 µs. Moreover, our unpacked PDs showed good storage and light stability. Our results lay a foundation for the application of all inorganic perovskite in the ultraviolet region.

Photochromic nanostructures based on diarylethenes with perylene diimide.

A bisthienylethene-functionalized perylene diimide (BTE-PDI) photochromic dyad was synthesized for self-assembly into 1-D nanotubes by a reprecipitation method. SEM and TEM observations showed that the nanotubes were formed from their 0-D precursors of hollow nanospheres. HR-TEM images revealed that both the nanospheres and the nanotubes have highly ordered lamellar structure, indicating the hierarchical process during assembly. The IR and XRD results revealed that DAE-PDI molecules were connected through intermolecular hydrogen bonds to form building blocks that self-assembled into nanostructures. Electronic absorption and fluorescence spectroscopic results indicated the H-aggregate nature of the self-assembled nanostructures. Competition and cooperation between the dipole-dipole interaction, intermolecular pi-pi stacking, and hydrophilic/hydrophobic interaction are suggested to result in nanostructures. Reconstruction was found to happen during the morphology transition progress from the 0-D nanospheres to the 1-D nanotubes, which was driven by donor-acceptor dipole-dipole interactions. Green emission at 520 nm originating from the DAE subunit was observed for the aggregates of vesicles and nanotubes, which could be regulated by photoirradiation with 365 nm light, suggesting the nanoaggregates to be photochromic switches.

Screening Genes Promoting Exit from Naive Pluripotency Based on Genome-Scale CRISPR-Cas9 Knockout.

Two of the main problems of stem cell and regenerative medicine are the exit of pluripotency and differentiation to functional cells or tissues. The answer to these two problems holds great value in the clinical translation of stem cell as well as regenerative medicine research. Although piling researches have revealed the truth about pluripotency maintenance, the mechanisms underlying pluripotent cell self-renewal, proliferation, and differentiation into specific cell lineages or tissues are yet to be defined. To this end, we took full advantage of a novel technology, namely, the genome-scale CRISPR-Cas9 knockout (GeCKO). As an effective way of introducing targeted loss-of-function mutations at specific sites in the genome, GeCKO is able to screen in an unbiased manner for key genes that promote exit from pluripotency in mouse embryonic stem cells (mESCs) for the first time. In this study, we successfully established a model based on GeCKO to screen the key genes in pluripotency withdrawal. Our strategies included lentiviral package and infection technology, lenti-Cas9 gene knockout technology, shRNA gene knockdown technology, next-generation sequencing, model-based analysis of genome-scale CRISPR-Cas9 knockout (MAGeCK analysis), GO analysis, and other methods. Our findings provide a novel approach for large-scale screening of genes involved in pluripotency exit and offer an entry point for cell fate regulation research.

[Multi-spectroscopy applied to study blue gel pen inks].

Multi-spectroscopy, such as FTIR, dispersive Raman spectroscopy and UV-Vis, was applied to characterize the blue gel pen inks on paper at the time in the present study. Twenty eight collected blue gel pens with different brands and serials were separated into four different classes by different absorptions or Raman shift. Composition changing of blue gel pen inks on paper during artificial ageing was studied via TD-MS as well. The advantage and disadvantage of this spectroscopy used in analyzing and identifying blue gel pen inks on paper, and the potential application in the research on relative and absolute ageing of documents were discussed.

Enzyme-Like Catalytic Activity of Porphyrin-Functionalized Ceria Nanotubes for Water Oxidation.

Artificial enzymes have broad applications in catalysis and can be used to help understand catalytic mechanisms. Nanoceria has various enzyme-mimetic properties that depend on the relative content of Ce3+ and Ce4+ . In this context, CeO2 nanotubes was investigated as catalase mimics for water oxidation. The photosensitizer 5,10,15,20-meso-tetra(4-carboxyphenyl) porphyrin (TCPP) was facilely embedded in CeO2 nanotubes (TCPP@CeO2 NTs), and photoinduced charge transfer was shown to occur between the strongly coupled TCPP and CeO2 , which leads to effective charge separation and charge redistribution within the hybrids. As a consequence, formation of H2 O2 , a competing process in water oxidation and a key factor that affects the oxidative stability of photoelectrodes, was effectively inhibited on TCPP@CeO2 NTs. These findings show that enzyme mimics can be used for the selective generation of reactive oxygen species, and therefore to control the kinetics of water oxidation.

The cardioprotective effects of carvedilol on ischemia and reperfusion injury by AMPK signaling pathway.

Carvedilol, a third generation beta blocker, is in clinical use for heart failure patients. However, besides adrenergic receptor blockade, the pharmacological effects of carvedilol on cardiomyocytes remain unknown. AMP-activated protein kinase (AMPK) is an emerging target recognized for heart failure treatment. The mechanical properties and intracellular Ca2+ properties were measured in isolated cardiomyocyte contractile functions in response to ischemic stress. Treatment of cardiomyocytes with carvedilol augmented phosphorylation of AMPK and downstream acetyl CoA carboxylase (ACC), and ameliorated hypoxia-induced impairment in maximal velocity of shortening (+dL/dt) and relengthening (-dL/dt), and the impaired peak height and peak shortening (PS) amplitude caused by hypoxia. Carvedilol treatment improved calcium homeostasis with rescuing the peak Ca2+ signal, the maximum rate of Ca2+ change during contraction (+dF/dt) and the maximum rate of Ca2+ change during relaxation (-dF/dt) under hypoxia conditions. In mouse hearts perfused ex vivo with carvedilol, the function of post-ischemia left ventricle was improved and an augmentation in myocardial glucose uptake and glucose oxidation, and inhibition of fatty acid oxidation during ischemia and reperfusion. The protective effect of carvedilol was further supported in an in vivo regional ischemia model by ligation of left anterior descending coronary artery (LAD), mice treated with carvedilol followed by LAD occlusion and reperfusion showed significant size reduction in infarcted myocardium and improved cardiac functions. Therefore, Carvedilol as a clinical drug can modulate cardiac AMPK signaling pathway to reduce ischemic insults by ischemia and reperfusion.

Establishment and Identification of a CiPSC Lineage Reprogrammed from FSP-tdTomato Mouse Embryonic Fibroblasts (MEFs).

Safety issues associated with transcription factors or viruses may be avoided with the use of chemically induced pluripotent stem cells (CiPSCs), thus promoting their clinical application. Previously, we had successfully developed and standardized an induction method using small-molecule compound, with simple operation, uniform induction conditions, and clear constituents. In order to verify that the CiPSCs were indeed reprogrammed from mouse embryonic fibroblasts (MEFs), and further explore the underlying mechanisms, FSP-tdTomato mice were used to construct a fluorescent protein-tracking system of MEFs, for revealing the process of CiPSC reprogramming. CiPSCs were identified by morphological analysis, mRNA, and protein expression of pluripotency genes, as well as teratoma formation experiments. Results showed that after 40-day treatment of tdTomato-MEFs with small-molecule compounds, the cells were presented with prominent nucleoli, high core-to-cytoplasmic ratio, round shape, group and mass arrangement, and high expression of pluripotency gene. These cells could differentiate into three germ layer tissues in vivo. As indicated by the above results, tdTomato-MEFs could be reprogrammed into CiPSCs, a lineage that possesses pluripotency similar to mouse embryonic stem cells (mESCs), with the use of small-molecule compounds. The establishment of CiPSC lineage, tracked by fluorescent protein, would benefit further studies exploring its underlying mechanisms. With continuous expression of fluorescent proteins during cellular differentiation, this cell lineage could be used for tracking CiPSC transplantation and differentiation into functional cells.

Chromatin Accessibility Dynamics during Chemical Induction of Pluripotency.

Despite its exciting potential, chemical induction of pluripotency (CIP) efficiency remains low and the mechanisms are poorly understood. We report the development of an efficient two-step serum- and replating-free CIP protocol and the associated chromatin accessibility dynamics (CAD) by assay for transposase-accessible chromatin (ATAC)-seq. CIP reorganizes the somatic genome to an intermediate state that is resolved under 2iL condition by re-closing previously opened loci prior to pluripotency acquisition with gradual opening of loci enriched with motifs for the OCT/SOX/KLF families. Bromodeoxyuridine, a critical ingredient of CIP, is responsible for both closing and opening critical loci, at least in part by preventing the opening of loci enriched with motifs for the AP1 family and facilitating the opening of loci enriched with SOX/KLF/GATA motifs. These changes differ markedly from CAD observed during Yamanaka-factor-driven reprogramming. Our study provides insights into small-molecule-based reprogramming mechanisms and reorganization of nuclear architecture associated with cell-fate decisions.

Postsynthetic ionization of an imidazole-containing metal-organic framework for the cycloaddition of carbon dioxide and epoxides.

A bifunctional imidazolium functionalized zirconium metal-organic framework (Zr-MOF), (I-)Meim-UiO-66 (2), was successfully prepared from the imidazole-containing Zr-MOF Im-UiO-66 (1) by a post-synthetic modification (PSM) method. It was found that the crystal size and pore features of the imidazole-containing 1 could be tuned at the nanoscale. The bifunctional MOF 2, containing Brønsted acid sites and iodide ions, was shown to be an efficient and recyclable heterogeneous catalyst for the cycloaddition of carbon dioxide (CO2) with epoxides, without the use of any co-catalyst, at ambient pressure. The solvent-free synthesis of the cyclic carbonate from CO2 and an epoxide was monitored by in situ Fourier transform infrared spectroscopy (FT-IR) and an acid/base synergistic catalysis mechanism was proposed. We hope that our strategy provides an effective approach for the introduction of functional N-heterocyclic groups into MOFs for potential applications.