RESUMEN
To date, controlled deformation of two-dimensional (2D) materials has been extensively demonstrated with substrate-supported structures. However, interfacial effects arising from these supporting materials may suppress or alter the unique behavior of the deformed 2D materials. To address interfacial effects, we report, for the first time, the formation of a micrometer-scale freestanding wrinkled structure of 2D material without any encapsulation layers where we observed the enhanced light-matter interactions with a spatial modulation. Freestanding wrinkled monolayer WSe2 exhibited about a 330% enhancement relative to supported wrinkled WSe2 quantified through photoinduced force microscopy. Spatial modulation and enhancement of light interaction in the freestanding wrinkled structures are attributed to the enhanced strain-gradient effect (i.e., out-of-plane polarization) enabled by removing the constraining support and proximate dielectrics. Our findings offer an additional degree of freedom to modulate the out-of-plane polarization and enhance the out-of-plane light-matter interaction in 2D materials.
RESUMEN
Interlayer excitons in heterobilayers of transition-metal dichalcogenides (TMDCs) have generated enormous interest due to their permanent vertical dipole moments and long lifetimes. However, the effects of mechanical strain on the optoelectronic properties of interlayer excitons in heterobilayers remain relatively uncharacterized. Here, we experimentally demonstrate strain tuning of Γ-K interlayer excitons in molybdenum disulfide and tungsten diselenide (MoS2/WSe2) wrinkled heterobilayers and obtain a deformation potential constant of â¼107 meV/% uniaxial strain, which is approximately twice that of the intralayer excitons in the constituent monolayers. We further observe a nonmonotonic dependence of the interlayer exciton photoluminescence intensity with strain, which we interpret as being due to the sensitivity of the Γ point to band hybridization arising from the competition between in-plane strain and out-of-plane interlayer coupling. Strain engineering with interlayer excitons in TMDC heterobilayers offers higher strain tunability and new degrees of freedom compared to their monolayer counterparts.
RESUMEN
Atomically thin 2D materials exhibit strong intralayer covalent bonding and weak interlayer van der Waals interactions, offering unique high in-plane strength and out-of-plane flexibility. While atom-thick nature of 2D materials may cause uncontrolled intrinsic/extrinsic deformation in multiple length scales, it also provides new opportunities for exploring coupling between heterogeneous deformations and emerging functionalities in controllable and scalable ways for electronic, optical, and optoelectronic applications. In this review, we discuss (i) the mechanical characteristics of 2D materials, (ii) uncontrolled inherent deformation and extrinsic heterogeneity present in 2D materials, (iii) experimental strategies for controlled heterogeneous deformation of 2D materials, (iv) 3D structure-induced novel functionalities via crumple/wrinkle structure or kirigami structures, and (v) heterogeneous strain-induced emerging functionalities in exciton and phase engineering. Overall, heterogeneous deformation offers unique advantages for 2D materials research by enabling spatial tunability of 2D materials' interactions with photons, electrons, and molecules in a programmable and controlled manner.
RESUMEN
Flexible electrodes that allow electrical conductance to be maintained during mechanical deformation are required for the development of wearable electronics. However, flexible electrodes based on metal thin-films on elastomeric substrates can suffer from complete and unexpected electrical disconnection after the onset of mechanical fracture across the metal. Here we show that the strain-resilient electrical performance of thin-film metal electrodes under multimodal deformation can be enhanced by using a two-dimensional (2D) interlayer. Insertion of atomically-thin interlayers - graphene, molybdenum disulfide, or hexagonal boron nitride - induce continuous in-plane crack deflection in thin-film metal electrodes. This leads to unique electrical characteristics (termed electrical ductility) in which electrical resistance gradually increases with strain, creating extended regions of stable resistance. Our 2D-interlayer electrodes can maintain a low electrical resistance beyond a strain in which conventional metal electrodes would completely disconnect. We use the approach to create a flexible electroluminescent light emitting device with an augmented strain-resilient electrical functionality and an early-damage diagnosis capability.
RESUMEN
Boron nitride nanotubes (BNNT) uniformly dispersed in stretchable materials, such as poly(dimethylsiloxane) (PDMS), could create the next generation of composites with augmented mechanical, thermal, and piezoelectric characteristics. This work reports tunable piezoelectricity of multifunctional BNNT/PDMS stretchable composites prepared via co-solvent blending with tetrahydrofuran (THF) to disperse BNNTs in PDMS while avoiding sonication or functionalization. The resultant stretchable BNNT/PDMS composites demonstrate augmented Young's modulus (200% increase at 9 wt% BNNT) and thermal conductivity (120% increase at 9 wt% BNNT) without losing stretchability. Furthermore, BNNT/PDMS composites demonstrate piezoelectric responses that are linearly proportional to BNNT wt%, achieving a piezoelectric constant (|d33 |) of 18 pmV-1 at 9 wt% BNNT without poling, which is competitive with commercial piezoelectric polymers. Uniquely, BNNT/PDMS accommodates tensile strains up to 60% without plastic deformation by aligning BNNTs, which enhances the composites' piezoelectric response approximately five times. Finally, the combined stretchable and piezoelectric nature of the composite was exploited to produce a vibration sensor sensitive to low-frequency (≈1 kHz) excitation. This is the first demonstration of multifunctional, stretchable BNNT/PDMS composites with enhanced mechanical strength and thermal conductivity and furthermore tunable piezoelectric response by varying BNNT wt% and applied strain, permitting applications in soft actuators and vibration sensors.
RESUMEN
Conventional imaging and recognition systems require an extensive amount of data storage, pre-processing, and chip-to-chip communications as well as aberration-proof light focusing with multiple lenses for recognizing an object from massive optical inputs. This is because separate chips (i.e., flat image sensor array, memory device, and CPU) in conjunction with complicated optics should capture, store, and process massive image information independently. In contrast, human vision employs a highly efficient imaging and recognition process. Here, inspired by the human visual recognition system, we present a novel imaging device for efficient image acquisition and data pre-processing by conferring the neuromorphic data processing function on a curved image sensor array. The curved neuromorphic image sensor array is based on a heterostructure of MoS2 and poly(1,3,5-trimethyl-1,3,5-trivinyl cyclotrisiloxane). The curved neuromorphic image sensor array features photon-triggered synaptic plasticity owing to its quasi-linear time-dependent photocurrent generation and prolonged photocurrent decay, originated from charge trapping in the MoS2-organic vertical stack. The curved neuromorphic image sensor array integrated with a plano-convex lens derives a pre-processed image from a set of noisy optical inputs without redundant data storage, processing, and communications as well as without complex optics. The proposed imaging device can substantially improve efficiency of the image acquisition and recognition process, a step forward to the next generation machine vision.