Using photocatalyzed-peroxonization to disinfect and denature genetic material of bacterial plasmids present in hospital wastewater.

The literature reports the presence of multiresistant microorganisms in wastewater discharged from municipal and hospital wastewater treatment plants (WWTPs). This has led to questions concerning the disinfection efficiency of the treatments applied. Thus, this study aimed to assess the efficiency of different chemical oxidation methods to disinfect and to degrade bacterial plasmids present in hospital wastewaters, to avoid the dispersion of antibiotic resistance genes in the environment. The methods tested were UV254nm alone or associated with an Ag or Ti-photocatalyst in photo-peroxonization (UV254 nm/H2O2/O3/Ag2O/Ag2CO3@PU or UV254 nm/H2O2/O3/TiO2@PU) under different pH conditions (4, 7, and 10). The application of plasmid DNA electrophoresis to hospital wastewater treated using an advanced oxidation process (AOP) achieved the total structural denaturation of microorganism plasmids at the three pH values tested. Also, UV254 nm alone was partially efficient in the disinfection of hospital wastewater. AOPs performed with the two functionalized catalysts resulted in 100% disinfection after 10 min at the three pH values tested. No intact plasmids were observed after 20 min of treatment with photocatalysis. This study could contribute to the development and improvement of wastewater treatment aimed at mitigating the spread of multiresistant microorganisms in the environment.

Degradation of recalcitrant textile azo-dyes by fenton-based process followed by biochar polishing.

The use of advanced oxidative processes (AOPs) is an efficient alternative for the treatment of textile wastewaters. The aim of this study was to assess the dye removal efficiency of a Fenton-based degradation process followed by a polishing step using biochar prepared from rice husk. Six recalcitrant textile dyes - Reactive Red 195 (D1), Synolon Brown S2 (D2), Orange Remazol RGB (D3), Yellow Synozol K3 (D4), Reactive Orange (D5), and Reactive Black 5 (D6) - were treated with Fenton and photo-Fenton processes (with and without biochar polishing) under optimized conditions. The results showed a general efficiency ranking: photo-Fenton + biochar ≈ Fenton + biochar > photo-Fenton ≈ Fenton. The Fenton process was also efficient for the regeneration of the dye-saturated biochar. The photo-Fenton + biochar process achieved the following color removal percentages: D1 (98.8%), D2 (99.7%), D3 (98.9%), D4 (96.3%), D5 (94.2%) and D6 (94.8%). This process was applied to a real conventionally-treated textile wastewater and analysis showed a reduction in BOD (87.5% degradation), COD (62.5% degradation) and color (93.5% mean removal). These results reveal the possibility for the reuse of the treated water for non-potable industrial uses, for example, floor washing or the cleaning of machines and toilet areas.

Genotoxicity assessment of particulate matter emitted from heavy-duty diesel-powered vehicles using the in vivo Vicia faba L. micronucleus test.

Diesel exhaust particulate matter (PM) can have an impact on the environment due to its chemical constitution. A large number of substances such as organic compounds, sulfates, nitrogen derivatives and metals are adsorbed to the particles and desorption of these contaminants could promote genotoxic effects. The objective of this study was to assess the in vivo genotoxicity profile of diesel exhaust PM from heavy-duty engines. Extracts were obtained through leaching with pure water and chemical extraction using three organic solvents (dichloromethane, hexane, and acetone). The in vivo Vicia faba micronucleus test (ISO 29200 protocol) was used to assess the environmental impact of the samples collected from diesel exhaust PM. The solid diesel PM (soot) dissolved in water, and the different extracts, showed positive results for micronucleus formation. After the addition of EDTA, the aqueous extracts did not show a genotoxic effect. The absence of metals in the organic solvent extract indicated that organic compounds also had a genotoxic effect, which was not observed for a similar sample cleaned in a C18 column. Thus, considering the ecological importance of higher plants in relation to ecosystems (in contrast to Salmonella spp., which are commonly used in mutagenicity studies), the Vicia micronucleus test was demonstrated to be appropriate for complementing prokaryotic or in vitro tests on diesel exhaust particulate matter included in risk assessments.

A proposal for new genotoxic and cytotoxic endpoints to assess chemical effects on the red algae Ceramium tenuicorne.

Macroalgae provide key contributions to aquatic ecosystems, including their role as primary producers and the provision of biotopes for marine organisms, fish spawning, and fish nurseries. The aim of this study was to evaluate the feasibility of a micronucleus test and a comet assay in Ceramium tenuicorne, a red macroalga. This alga is widely distributed in marine ecosystems and brackish waters, and is therefore a potential bioindicator of the effects of anthropogenic pollution in these ecosystems. Unfortunately, the two genotoxicity tests evaluated were not suitable for this alga because the nuclei are generally very small (between 2 and 10 µm), are variable in size, and there may be several nuclei in each cell (between 1 and 5 in our observations). However, the present study allowed us to define conditions for observing these algal cells and optimizing the choice of DNA dye (orcein), cell fixation solution (Carnoy's solution), and hydrolysis step (HCl, 1200 mmol/L solution for 1 min). This research allowed us to propose two genotoxicity and cytotoxicity endpoints for assessing chemical effects on the algal cells: counting of nuclei in cortical cell areas, and the frequency of axial cells in mitosis. These two criteria were measured after exposing C. tenuicorne to two reference substances: cadmium chloride and maleic hydrazide, and we highlight the effects from 1 × 10-5 M of CdCl2 and 5 × 10-5 M of maleic hydrazide.

Eco(geno)toxicity of the new commercial insecticide Platinum Neo, a mixture of the neonicotinoid Thiamethoxam and the pyrethroid Lambda-Cyhalothrin.

New mixtures of pesticides are being placed on the market to increase the spectrum of phytosanitary action. Thus, the eco(geno)toxic effects of the new commercial mixture named Platinum Neo, as well as its constituents the neonicotinoid Thiamethoxam and the pyrethroid Lambda-Cyhalothrin, were investigated using the species Daphnia magna, Raphidocelis subcapitata, Danio rerio, and Allium cepa L. The lowest- and no-observed effect concentration (LOEC and NOEC) were measured in ecotoxicological tests. While Thiamethoxam was ecotoxic at ppm level, Lambda-Cyhalothrin and Platinum Neo formulation were ecotoxic at ppb level. The mitotic index (MI), chromosomal aberrations and micronucleus [MN] frequency were measured as indicators of phytogenotoxicity in A. cepa plants exposed for 12 hours to the different insecticides and their mixture under different dilutions. There were significant alterations in the MI and MN frequency in comparison with the A. cepa negative control group, with Thiamethoxam, Lambda-Cyhalothrin, and Platinum Neo treatments all significantly reducing MI and increasing MN frequency. Thus, MI reduction was found at 13.7 mg L-1 for Thiamethoxam, 0.8 µg L-1 for Lambda-Cyahalothrin, and 2.7:2 µg L-1 for Platinum Neo, while MN induction was not observed at 14 mg L-1 for Thiamethoxam, 0.8 µg L-1 for Lambda-Cyahalothrin, and 1.4:1 µg L-1 for Platinum Neo. The insecticide eco(geno)toxicity hierarchy was Platinun Neo > Lambda-Cyhalothrin > Thiamethoxam, and the organism sensitivity hierarchy was daphnids > fish > algae >A. cepa. Eco(geno)toxicity studies of new pesticide mixtures can be useful for management, risk assessment, and avoiding impacts of these products on living beings.

Arsenate (As V) in water: quantitative sensitivity relationships among biomarker, ecotoxicity and genotoxicity endpoints.

It is useful to test ecotoxicity and genotoxicity endpoints in the environmental impact assessment. Here, we compare and discuss ecotoxicity and genotoxicity effects in organisms in response to exposure to arsenate (As V) in solution. Eco(geno)toxicity responses in Aliivibrio fischeri, Lytechinus variegatus, Daphnia magna, Skeletonema costatum and Vicia faba were analyzed by assessing different endpoints: biomass growth, peroxidase activity, mitotic index, micronucleus frequency, and lethality in accordance with the international protocols. Quantitative sensitivity relationships (QSR) between these endpoints were established in order to rank endpoint sensitivity. The results for the QSR values based on the lowest observed effect concentration (LOEC) ratios varied from 2 (for ratio of root peroxidase activity to leaf peroxidase activity) to 2286 (for ratio of higher plant biomass growth to root peroxidase activity). The QSR values allowed the following sensitivity ranking to be established: higher plant enzymatic activity>daphnids≈echinoderms>bacteria≈algae>higher plant biomass growth. The LOEC values for the mitotic index and micronucleus frequency (LOEC=0.25mgAsL(-1)) were similar to the lowest LOEC values observed in aquatic organisms. This approach to the QSR of different endpoints could form the basis for monitoring and predicting early effects of pollutants before they give rise to significant changes in natural community structures.

Sensitivity of different aquatic bioassays in the assessment of a new natural formicide.

Agrochemicals have the potential to cause deleterious effects on living organisms and therefore they must be subjected to various (eco)toxicological studies and monitoring programs in order to protect human health and the environment. The aim of this study was to assess the ecotoxicity of a new natural formicide with a battery of three classical and three ecotox-kit tests. The former tests were performed with Aliivibrio fischeri bacteria (Lumistox test), the cladoceran Daphnia magna and Pseudokirchneriella subcapitata algae, and the latter with Thamnotoxkit F(TM) (Thamnocephalus platyurus), Ostracodtoxkit F® (Heterocypris incongruens) and LuminoTox (photosynthetic enzyme complexes). In the range of formicide concentrations tested (from 0.06 to 2.0 g L(-1)), the measurement endpoint values varied from 0.79 g L(-1) for the algal test to > 2 g L(-1) for the LuminoTox and Ostracodtoxkit F® tests. Hierarchical sensitivity ranking based on the no-observed effect concentration (NOEC) values established to assess the formicide ecotoxicity was as follows: algal growth inhibition test ≈ daphnid immobilization test ≈ bacterial luminescence inhibition test > Thamnotoxkit F™ > LuminoTox > Ostracodtoxkit F®. Overall, results from the battery of bioassays showed that this formicide preparation presents low ecotoxicity as compared to the aquatic ecotoxicity of presently commercialized formicides. In conclusion, classical aquatic bioassays are more sensitive than ecotox-kit tests in the assessment and monitoring of the new natural formicide.

Are hospital wastewater treatment plants a source of new resistant bacterial strains?

To understand which type of hospital waste may contain the highest amount of antibiotic resistant microorganisms that could be released into the environment, the bacterial strains entering and leaving a hospital wastewater treatment plant (HWTP) were identified and tested for their antibiotic susceptibility. To achieve this goal, samples were collected from three separate sites, inlet and outlet wastewater positions, and sludge generated in a septic tank. After microbiological characterization according to APHA, AWWA, and WEF protocols, the relative susceptibility of the bacterial strains to various antibiotic agents was assessed according to the Clinical and Laboratory Standards Institute guidelines, to determine whether there were higher numbers of resistant bacterial strains in the inlet wastewater sample than in the outlet wastewater and sludge samples. The results showed more antibiotic resistant bacteria in the sludge than in the inlet wastewater, and that the Enterobacteriaceae family was the predominant species in the collected samples. The most antibiotic-resistant families were found to be Streptococcacea and non-Enterobacteriaceae. Some bacterial strains were resistant to all the tested antibiotics. We conclude that the studied HWTP can be considered a source of resistant bacterial strains. It is suggested that outlet water and sludge generated in HWTPs should be monitored, and that efficient treatment to eliminate all bacteria from the different types of hospital waste released into the environment is adopted.

An alternative approach to assess ecotoxicological effects of agrochemical combinations used in Brazilian aquaculture farms.

Agrochemicals used for treating and preventing aquaculture diseases are usually present in combination with other compounds, and the toxicity resulting from their chemical interactions presents an important reason to assess the ecotoxicity of compound mixtures in view to better understanding the joint action of chemicals and avoiding their environmental impacts. In this study, we evaluated the acute aquatic ecotoxicity of several compounds used in Brazilian fish farming (Oxytetracycline [OXT], Trichlorfon [TRC], and BioFish® [BIO]), both individually and in binary and ternary mixtures. Initial test concentrations were prepared according to the recommended concentrations for aquaculture application, and from these, a geometric dilution series was tested on two important fresh water quality indicator species, the microcrustacean Daphnia magna and the bacterium Aliivibrio fischeri. At the recommended pond application rate, TRC and BIO applied individually showed toxicity to the tested organisms in terms of the lowest-observed-effect concentration (LOEC), and D. magna was always more sensitive than A. fischeri. For the two test organisms, the results obtained with the binary mixtures showed that the TRC and BIO mixture was more toxic than TRC and OXT, which in turn was more toxic than OXT and BIO. The toxicity from all agrochemicals in the ternary mixture was more than that of the agrochemical combinations in the binary mixtures. Given the results presented in this study, it is evident that the mode of action and availability of the tested compounds undergo changes that increase toxicity when they are present in combination, and therefore, aquaculture wastewater treatment should be adopted to ensure decontamination of agrochemical residues.

Is there a relationship between early genotoxicity and life-history traits in Vicia faba exposed to cadmium-spiked soils?

The Vicia faba-micronucleus test is usually performed to assess the genotoxic potential of pure substances, effluents or water extracts from soil. It is also a relevant, early biological tool to detect mutagenic substances in crude soils. Nevertheless, the physiological meaning of such DNA damage for the plant in the long term remains to be elucidated. To know more about this, two experiments were carried out with the plant model V. faba. In a preliminary short-term experiment, seeds were exposed for five days to a soil spiked with different concentrations of CdCl(2) in order to identify the concentration inducing the highest number of micronuclei without affecting plant growth. Thereafter, a long-term experiment was performed in the soil spiked with such a concentration (i.e. 510µmol CdCl(2) per kg dry soil), in which V. faba seeds were directly sowed and allowed to grow during 151 days. As a result, Cd-spiked soil did not affect seed-emergence time nor the growth-rate of the plants for the first two months. The first signs of toxicity appeared after the 70th day of exposure. Interestingly, exposed plants produced their first flower earlier and had a longer flowering period than did control ones. Nevertheless, total flower production was less abundant in exposed plants than in control plants. Moreover, fruits appeared in control plants whereas no fruit was formed in exposed plants. At last, exposed plants showed a reduced life time. Our results suggest that the micronucleus assay can provide a predictive biomarker of long-term deleterious effects in plants.

Swine slaughterhouse biowaste: an environmental sustainability assessment of composting, amended soil quality, and phytotoxicity.

In this article, the environmental sustainability of a circular economy concept applied to the management of biowaste was studied. To achieve this goal, the composting performance, compost-amended soil health, and phytotoxicity were assessed in the case of management of solid waste from a small swine slaughterhouse. Microorganisms present in a similar composting process were used as inoculums to improve the efficiency of composting. Addition of the inoculum promoted a faster and more efficient composting process than composting without the inoculum. The physical, chemical, and microbiological characteristics of soil were considered to be improved after compost application. Phytotoxicity tests in soils with and without compost amendment showed that a soil-compost mixture (90:10 and 70:30 mass ratios) was not phytotoxic to the plant species Sorghum saccharatum and Lepidium sativum, and that soil with compost showed higher plant biomass growth than that without compost amendment. The triple bottom line methodology used in this study can help in the assessment of circular economy activity in relation to the environmentally sustainable management of solid waste generated in small swine slaughterhouses.

Urban afforestation: using phytotoxicity endpoints to compare air pollution tolerance of two native Brazilian plants Aroeira (Schinus terebinthifolius) and Cuvatã (Cupania vernalis).

Urban afforestation can mitigate the effects of air pollution, but the suitability of plant species for this purpose needs to be determined according to pollution intensity and climate change. The goal of this study was to evaluate the sensitivity of different phytotoxicity endpoints using two native Brazilian plant species as models, Aroeira (Schinus terebinthifolius) and Cuvatã (Cupania vernalis). The sensitivity parameters evaluated could help in selecting the most air-pollution-tolerant plant species for use in urban afforestation programs. The two plant species were exposed, in a greenhouse, to the combustion gases of a diesel engine for 120 days, with daily intermittent gas exposure. Every 30 days, leaf injury (chlorosis and necrosis), biomass, and physiological/biochemical parameters (proteins, chlorophyll, and peroxidase enzyme activity) were evaluated for both plant species. For the two selected species, the endpoints studied can be ranked according to their sensitivity (or inversely the tolerance) to diesel oil combustion gases in the following order: peroxidase > biomass ≈ chlorophyll > protein > leaf injury. The endpoint responses of higher plants can be used to assess the suitability of particular plant species for use in urban afforestation areas with relatively intense vehicle traffic.

A 3D ecotoxi-topological profile: Using concentration-time-response surfaces to show peroxidase activity in Zea mays (L.) exposed to aluminium or arsenic in hydroponic conditions.

This study sought to use concentration-time-response surfaces to show the effects of exposure to toxic (semi-)metals on peroxidase activity in higher plants as a function of exposure-concentration and exposure-time. Maize (Zea mays L.) seedlings (i.e., leaves and roots) were exposed to arsenic (as As3+) or aluminium (as Al3+) under hydroponic conditions, and their biomass and peroxidase enzyme responses were assessed at different concentration-time-exposures. The 3D ecotoxi-profile generated with these data showed two distinct regions: the first region is formed by exposures (i.e., points for time-concentration pairings) that were not statistically different from the results of the control points (i.e., zero toxicant concentration and all exposure-times), whereas the second region is formed by exposure pairings with results that were statistically different to those obtained from control pairings. Overall, the data show that enzyme activity increased over a shorter exposure-time when there was an increase in the exposure-concentration of the toxicant, which can be seen on a 3-D toxicity profile. We propose that quantitative relationship ratios from different assessed endpoints (e.g., biomass and enzyme activity) and enzymatic concentration-time-response surfaces could be helpful in the field of environmental-policy management.

Using textile industrial sludge, sewage wastewater, and sewage sludge as inoculum to degrade recalcitrant textile dyes in a co-composting process: an assessment of biodegradation efficiency and compost phytotoxicity.

Recalcitrant dyes found in textile wastewater represent a threat for sustainable textile production due to their resistance to conventional treatments. This study assessed an alternative co-composting system for the treatment of recalcitrant textile dyes where textile industrial sludge, sewage wastewater, or sewage sludge were used as microbial compost inocula. The biodegradation efficiency of bioreactor trials and compost quality of the co-composting system were assessed by visible spectrophotometry and by a phytotoxicity test. The co-composting system (dry weight (dw) basis) consisted of 200 g of restaurant organic residues + 200 g sewage sludge (or 100 mL sewage wastewater, or 200 g textile sludge) + 100 mL of a 10% dye solution (Reactive Red 195, or Synolon Brown, or Orange Remazol, or Yellow Synozol, or Reactive Orange 122, or Reactive Black 5). After 60 days of composting, all dyes were biodegraded according to spectrophotometric data, with efficiency varying from 97.2 to 99.9%. Inoculum efficiency ranking was textile sludge > sewage sludge > sewage wastewater. Regarding compost quality, a phytotoxicity study with lettuce showed no toxicity effect. Thus, co-composting can be a low-cost and efficient method for recalcitrant textile dye biodegradation and for managing textile sludge in terms of waste recycling, contributing to environmental sustainability.

Terrestrial short-term ecotoxicity of a green formicide.

When ants become annoying, large quantities of formicide are applied to terrestrial ecosystems in tropical regions, but awareness of the health and environmental impacts related to the use of synthetic pesticides has been increasing. The use of green pesticides to combat target organisms could reduce these impacts. In this regard, terrestrial ecotoxicity tests with higher plants (Brassica olaracea, Lactuca sativa and Mucuna aterrima), annelids (Eisenia foetida), Collembola (Folsomia candida) and soil enzyme activity analysis (diacetate fluorescein hydrolysis) were used to evaluate short-term terrestrial ecotoxicity of a green pesticide prepared from naturally-occurring organic compounds. At the highest formicide concentration tested in these experiments (i.e., 50 g kg(-1) soil) no toxicity toward terrestrial organisms was observed. The lack of short-term terrestrial ecotoxicity suggest that this green formicide can be classed as an environmentally friendly product as compared to the ecotoxicity of the most commonly used commercialized formicides.

Sensitivity of different parameters for selection of higher plants in urban afforestation: Exposure of Guabiroba (Campomanesia xanthocarpa O. Berg.) to diesel engine exhaust.

Urban afforestation can mitigate the effects of air pollution by acting as a sink for atmospheric emissions, but these emissions (e.g., combustion gases from diesel engines) can be a precursor of structural and physiological changes in higher plant species, which could compromise the success of afforestation projects. In this study, Guabiroba (Campomanesia xanthocarpa O. Berg.) plants were exposed in greenhouses to combustion gases emitted by a diesel engine over 120 days, with daily intermittent gas exposure. Every 30 days, leaf injury (chlorosis and necrosis), plant biomass and physiological/biochemical parameters (proteins, chlorophyll and peroxidase enzyme activity) were evaluated. The data obtained were used to construct a hierarchy of the sensitivity (and inversely, of the resistance or tolerance) of this higher plant species to the diesel oil combustion gases: peroxidase > biomass ≈ chlorophyll > protein > leaf injury. Variations in these parameters could be used for the early diagnosis of plant stress or as a marker for stress tolerance in trees. In the first case, a sensitive species could be used for the phytomonitoring of air quality and in the second case the lack of significant variations in these parameters would indicator tolerance of the plant species to air pollution. The results showed that Guabiroba, a plant native to the Atlantic forest, is sensitive to air pollution and could therefore be used for air quality monitoring, since all parameters analyzed were affected by the polluted air.

Antioxidant enzyme activities as affected by trivalent and hexavalent chromium species in Fontinalis antipyretica Hedw.

The detoxification mechanisms of the aquatic moss, Fontinalis antipyretica Hedw., exposed to Cr was analyzed. In addition, the influence of Cr salts (as Cr nitrate, chloride and potassium bichromate) on these mechanisms has also been studied. The activity of antioxidant enzymes superoxide dismutase (SOD, EC 1.15.1.1.), catalase (EC 1.11.1.6.), ascorbate peroxidase (APX, EC 1.11.1.11.), guaiacol peroxidase (GPX, EC 1.11.1.7.) and glutathione reductase (GR, EC 1.6.4.2.) increased in plants treated with Cr concentrations ranging from 6.25x10(-5) to 6.25mM when given as Cr(NO3)3. Antioxidant enzymes responded to the other two salts CrCl3 and K2Cr2O7 only with Cr concentrations higher than 6.25x10(-2)mM. Glutathione level and GSSG/GSH ratio also responded to Cr exposure but no dose-effect relationship could be observed. Moreover, two unknown thiol compounds were observed in mosses exposed to the highest Cr concentrations. Effects on chlorophyll contents and chlorophyll a/b ratios were also shown even at low Cr concentrations. Our results indicated that environmentally realistic concentrations of Cr could lead to impairment of the cellular activity towards F. antipyretica and that Cr(III), when present as a nitrate salt, was as harmful as Cr(VI).

Genotoxic effects and induction of phytochelatins in the presence of cadmium in Vicia faba roots.

This study investigates different effects in roots of Vicia faba (broad bean) after exposure to cadmium. Genotoxic effects were assessed by use of the well-known Vicia root tip micronucleus assay. Cytotoxic effects were evaluated by determining the mitotic index in root tip cells. Finally, molecular induction mechanisms were evaluated by measuring phytochelatins with HPLC. After hydroponical exposure of V. faba roots to a range of cadmium concentrations and during different exposure times, the results of this approach showed large variations, according to the endpoint measured: after 48 h of exposure, genotoxic effects were found between 7.5 x 10(-8) and 5 x 10(-7)M CdCl(2), and cytotoxic effects were observed between 2.5 x 10(-7) and 5 x 10(-7)M CdCl(2). Statistically significant phytochelatin (PC) concentrations were measured at >or=10(-6)M CdCl(2) for PC(2), and at >or=10(-5)M CdCl(2) for PC3 and PC4.

Decrease in the genotoxicity of metal-contaminated soils with biochar amendments.

Biochar amendments, i.e., the solid product of biomass pyrolysis, reduce soil metal availability, which may lower the toxicity of metal-contaminated soils. A direct link between the decrease in soil metal availability and improved plant development is however often difficult to establish, as biochar may induce undesirable side effects on plant growth, e.g., a modification to plant nutrition. In order to investigate toxicity processes at a cellular level, roots of Vicia faba were exposed for 7 days to three metal-contaminated substrates and one control soil, amended with a 0 or 5% (w/w) addition of a wood-derived biochar. Exposure to pure biochar was also tested. Root tip cells were then observed to count the number of micronuclei as an estimation of DNA damage and the number of cells at mitosis stage. Results showed that biochar amendments led to a significant decrease in soil metal availability (Cd, Cu, Ni, Pb, and Zn) and to enhance root development on acidic substrates. The micronucleus frequency in root tip cells was positively correlated and the number of mitotic cells negatively, to the extractability of Zn in soils and to the concentration of Zn in secondary roots. Exposure to pure biochar caused a lower production of roots than most soil substrates, but led to the lowest number of observed micronuclei. In conclusion, biochar amendments can reduce the genotoxicity associated with the presence of metallic contaminants in soils, thereby potentially improving plant growth.

Ecotoxicity assessment of particulate matter emitted from heavy-duty diesel-powered vehicles: influence of leaching conditions.

Concerns regarding the environmental impact of diesel exhaust particulate matter (DPM) have increased in recent years. Following emission to the atmosphere, these fine materials can sorb many contaminants at their surface, which can subsequently be released, for instance, due to physicochemical environmental changes. The desorption of contaminants from particulate matter will increase the environmental pollution and can promote ecotoxicological effects. In this context, the objective of this study was to assess the aquatic ecotoxicity profile of extracts of DPM obtained at two different pH values. Thus, after collecting particulate matter from the diesel exhaust of heavy engines, extracts were obtained with pure water (at pH 2.00 and 5.00) and with a mixture of three organic solvents (dichloromethane, n-hexane, and acetone). To assess the environmental impact of DPM, the exhaust extracts were used in a battery of aquatic bioassays including key organisms of the food chain: bacteria (Aliivibrio fischeri), algae (Scenedesmus subspicatus), daphnids (Daphnia magna), and fishes (Danio rerio). The aqueous leachate at natural pH (2.0) and solvent extracts were extremely ecotoxic, while the aqueous leachate at pH = 5.0 showed the lowest ecotoxicity. The global ranking of sensitivity for the biotests tested was daphnids > algae > bacteria > fishes. Thus, the use of this bioassay battery could improve our understanding of the impact of DPM on aquatic environments, which is dependent on the pH of the leaching process.