RESUMEN
In 2019 the Canadian Space Agency initiated development of a dedicated wildfire monitoring satellite (WildFireSat) mission. The intent of this mission is to support operational wildfire management, smoke and air quality forecasting, and wildfire carbon emissions reporting. In order to deliver the mission objectives, it was necessary to identify the technical and operational challenges which have prevented broad exploitation of Earth Observation (EO) in Canadian wildfire management and to address these challenges in the mission design. In this study we emphasize the first objective by documenting the results of wildfire management end-user engagement activities which were used to identify the key Fire Management Functionalities (FMFs) required for an Earth Observation wildfire monitoring system. These FMFs are then used to define the User Requirements for the Canadian Wildland Fire Monitoring System (CWFMS) which are refined here for the WildFireSat mission. The User Requirements are divided into Observational, Measurement, and Precision requirements and form the foundation for the design of the WildFireSat mission (currently in Phase-A, summer 2020).
RESUMEN
Regulatory requirements for renewable content in diesel fuel have been adopted in Canada. Fatty acid alkyl esters, that is, biodiesel, will likely be used to meet the regulations. However, the impacts on ambient atmospheric pollutant concentrations and human health outcomes associated with the use of biodiesel fuel blends in heavy duty diesel vehicles across Canada have not been evaluated. The objective of this study was to assess the potential human health implications of the widespread use of biodiesel in Canada compared to those from ultralow sulfur diesel (ULSD). The health impacts/benefits resulting from biodiesel use were determined with the Air Quality Benefits Assessment Tool, based on output from the AURAMS air quality modeling system and the MOBILE6.2C on-road vehicle emissions model. Scenarios included runs for ULSD and biodiesel blends with 5 and 20% of biodiesel by volume, and compared their use in 2006 and 2020. Although modeling and data limitations exist, the results of this study suggested that the use of biodiesel fuel blends compared to ULSD was expected to result in very minimal changes in air quality and health benefits/costs across Canada, and these were likely to diminish over time.
Asunto(s)
Biocombustibles/análisis , Ambiente , Gasolina/análisis , Vehículos a Motor , Salud Pública , Contaminantes Atmosféricos/análisis , Contaminantes Atmosféricos/economía , Biocombustibles/economía , Canadá , Humanos , Modelos Teóricos , Ozono/análisis , Tamaño de la Partícula , Material Particulado/análisis , Salud Pública/economía , Estaciones del Año , Emisiones de Vehículos/análisisRESUMEN
Five regional scale models with a horizontal domain covering the European continent and its surrounding seas, one hemispheric and one global scale model participated in an atmospheric mercury modelling intercomparison study. Model-predicted concentrations in ambient air were compared against mercury species observed at four monitoring stations in Central and Northern Europe and a station on the Irish west coast. The modelled concentrations of total particulate mercury (TPM) were generally consistent with the measurements at all sites. The models exhibited significant ability to simulate concentrations of gaseous elemental mercury (GEM), but some of the short-duration peaks at the Central European stations could not be consistently reproduced. Possible reasons for these discrepancies include (1) errors in the anthropogenic emissions inventory utilized; (2) coarse spatial resolution of the models; and (3) uncertainty of natural and re-emitted mercury sources. The largest discrepancies between measurements and modelled concentrations were found for reactive gaseous mercury (RGM). For these models, the uncertainty in predicting short-term (two-week episode) variations of mercury species in air can be characterized by the following overall statistics: 90% of the results for TGM are within a factor of 1.35 of the measurements; for TPM, 90% are within a factor of 2.5; and for RGM, 90% are within a factor of 10.
Asunto(s)
Contaminantes Atmosféricos/análisis , Mercurio/análisis , Modelos Teóricos , Alemania , Irlanda , Suecia , IncertidumbreRESUMEN
Five regional scale models with a horizontal domain covering the European continent and its surrounding seas, two hemispheric and one global scale model participated in the atmospheric Hg modelling intercomparison study. The models were compared between each other and with available measurements from 11 monitoring stations of the EMEP measurement network. Because only a very limited number of long-term measurement records of Hg were available, significant attention was given to the intercomparison of modelling results. Monthly and annually averaged values of Hg concentrations and depositions as well as items of the Hg deposition budgets for individual European countries were compared. The models demonstrated good agreement (within +/-20%) between annual modelled and observed values of gaseous elemental Hg. Modelled values of Hg wet deposition in Western and Central Europe agreed with the observations within +/-45%. The probability to predict wet depositions within a factor of 2 with regard to measurements was 50-70% for all the models. The scattering of modelling results for dry depositions of Hg was more significant (up to +/-50% at the annual scale and even higher for monthly data). Contribution of dry deposition to the total Hg deposition was estimated at 20-30% with elevated dry deposition fluxes during summer time. The participating models agree in their predictions of transboundary pollution for individual countries within +/-60% at the monthly scale and within +/-30% at the annual scale. For the cases investigated, all the models predict that the major part of national anthropogenic Hg emissions is transported outside the country territory.
Asunto(s)
Contaminantes Atmosféricos/análisis , Mercurio/análisis , Modelos Teóricos , Monitoreo del Ambiente , Europa (Continente)RESUMEN
UNLABELLED: Environment and Climate Change Canada's FireWork air quality (AQ) forecast system for North America with near-real-time biomass burning emissions has been running experimentally during the Canadian wildfire season since 2013. The system runs twice per day with model initializations at 00 UTC and 12 UTC, and produces numerical AQ forecast guidance with 48-hr lead time. In this work we describe the FireWork system, which incorporates near-real-time biomass burning emissions based on the Canadian Wildland Fire Information System (CWFIS) as an input to the operational Regional Air Quality Deterministic Prediction System (RAQDPS). To demonstrate the capability of the system we analyzed two forecast periods in 2015 (June 2-July 15, and August 15-31) when fire activity was high, and observed fire-smoke-impacted areas in western Canada and the western United States. Modeled PM2.5 surface concentrations were compared with surface measurements and benchmarked with results from the operational RAQDPS, which did not consider near-real-time biomass burning emissions. Model performance statistics showed that FireWork outperformed RAQDPS with improvements in forecast hourly PM2.5 across the region; the results were especially significant for stations near the path of fire plume trajectories. Although the hourly PM2.5 concentrations predicted by FireWork still displayed bias for areas with active fires for these two periods (mean bias [MB] of -7.3 µg m(-3) and 3.1 µg m(-3)), it showed better forecast skill than the RAQDPS (MB of -11.7 µg m(-3) and -5.8 µg m(-3)) and demonstrated a greater ability to capture temporal variability of episodic PM2.5 events (correlation coefficient values of 0.50 and 0.69 for FireWork compared to 0.03 and 0.11 for RAQDPS). A categorical forecast comparison based on an hourly PM2.5 threshold of 30 µg m(-3) also showed improved scores for probability of detection (POD), critical success index (CSI), and false alarm rate (FAR). IMPLICATIONS: Smoke from wildfires can have a large impact on regional air quality (AQ) and can expose populations to elevated pollution levels. Environment and Climate Change Canada has been producing operational air quality forecasts for all of Canada since 2009 and is now working to include near-real-time wildfire emissions (NRTWE) in its operational AQ forecasting system. An experimental forecast system named FireWork, which includes NRTWE, has been undergoing testing and evaluation since 2013. A performance analysis of FireWork forecasts for the 2015 wildfire season shows that FireWork provides significant improvements to surface PM2.5 forecasts and valuable guidance to regional forecasters and first responders.
Asunto(s)
Contaminantes Atmosféricos/análisis , Contaminación del Aire/estadística & datos numéricos , Biomasa , Monitoreo del Ambiente/métodos , Incendios/estadística & datos numéricos , Humo/análisis , Contaminación del Aire/análisis , Canadá , Cambio Climático , Predicción , Modelos Estadísticos , Modelos Teóricos , Estaciones del Año , Estados UnidosRESUMEN
At polar sunrise, gaseous elemental mercury (GEM) undergoes an exceptional dynamic exchange in the air and at the snow surface during which GEM can be rapidly removed from the atmosphere (the so-called atmospheric mercury depletion events (AMDEs)) as well as re-emitted from the snow within a few hours to days in the Polar Regions. Although high concentrations of total mercury in snow following AMDEs is well documented, there is very little data available on the redox transformation processes of mercury in the snow and the fluxes of mercury at the air/snow interface. Therefore, the net gain of mercury in the Polar Regions as a result of AMDEs is still an open question. We developed a new version of the global mercury model, GRAHM, which includes for the first time bidirectional surface exchange of GEM in Polar Regions in spring and summer by developing schemes for mercury halogen oxidation, deposition, and re-emission. Also for the first time, GOME satellite data-derived boundary layer concentrations of BrO have been used in a global mercury model for representation of halogen mercury chemistry. Comparison of model simulated and measured atmospheric concentrations of GEM at Alert, Canada, for 3 years (2002-2004) shows the model's capability in simulating the rapid cycling of mercury during and after AMDEs. Brooks et al. (1) measured mercury deposition, reemission, and net surface gain fluxes of mercury at Barrow, AK, during an intensive measurement campaign for a 2 week period in spring (March 25 to April 7, 2003). They reported 1.7, 1.0 +/- 0.2, and 0.7 +/- 0.2 microg m(-2) deposition, re-emission, and net surface gain, respectively. Using the optimal configuration of the model, we estimated 1.8 microg m(-2) deposition, 1.0 microg m(-2) re-emission, and 0.8 microg m(-2) net surface gain of mercury for the same time period at Barrow. The estimated net annual accumulation of mercury within the Arctic Circle north of 66.5 degrees is approximately 174 t with +/-7 t of interannual variability for 2002-2004 using the optimal configuration. We estimated the uncertainty of the model results to the Hg/Br reaction rate coefficient to be approximately 6%. Springtime is clearly demonstrated as the most active period of mercury exchanges and net surface gain (approximately 46% of annual accumulation) in the Arctic.