RESUMEN
Cases of coronavirus disease 2019 (COVID-19) have been reported in more than 200 countries. Thousands of health workers have been infected, and outbreaks have occurred in hospitals, aged care facilities, and prisons. The World Health Organization (WHO) has issued guidelines for contact and droplet precautions for healthcare workers caring for suspected COVID-19 patients, whereas the US Centers for Disease Control and Prevention (CDC) has initially recommended airborne precautions. The 1- to 2-meter (≈3-6 feet) rule of spatial separation is central to droplet precautions and assumes that large droplets do not travel further than 2 meters (≈6 feet). We aimed to review the evidence for horizontal distance traveled by droplets and the guidelines issued by the WHO, CDC, and European Centre for Disease Prevention and Control on respiratory protection for COVID-19. We found that the evidence base for current guidelines is sparse, and the available data do not support the 1- to 2-meter (≈3-6 feet) rule of spatial separation. Of 10 studies on horizontal droplet distance, 8 showed droplets travel more than 2 meters (≈6 feet), in some cases up to 8 meters (≈26 feet). Several studies of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) support aerosol transmission, and 1 study documented virus at a distance of 4 meters (≈13 feet) from the patient. Moreover, evidence suggests that infections cannot neatly be separated into the dichotomy of droplet versus airborne transmission routes. Available studies also show that SARS-CoV-2 can be detected in the air, and remain viable 3 hours after aerosolization. The weight of combined evidence supports airborne precautions for the occupational health and safety of health workers treating patients with COVID-19.
Asunto(s)
COVID-19 , Aerosoles , Anciano , Personal de Salud , Humanos , Control de Infecciones , SARS-CoV-2RESUMEN
Choral singing has become a major risk during the coronavirus disease 2019 (COVID-19) pandemic due to high infection rates. Our visualization and velocimetry results reveal that the majority of droplets expelled during singing follow the ambient airflow pattern. These results point toward the possibility of COVID-19 spread by small airborne droplets during singing.
Asunto(s)
COVID-19 , Canto , Aerosoles , Humanos , Pandemias , SARS-CoV-2RESUMEN
This paper is concerned with the influence of the incoming wall boundary layer thickness on the noise produced by a square finite wall-mounted cylinder in cross-flow. Acoustic and near wake velocity measurements have been taken in an anechoic wind tunnel for a cylinder in two different near-zero-pressure gradient turbulent boundary layers with thicknesses of 130% and 370% of the cylinder width, W. The cylinders have an aspect ratio of 0.29≤L/W≤22.9 (where L is the cylinder span) and were examined at a Reynolds number, based on width, of ReW = 1.4 × 104. The results presented in this paper demonstrate that increasing the height of the boundary layer delays the production of acoustic tones to higher aspect ratios. The height of the boundary layer changes the balance between upwash and downwash across the cylinder span, resulting in a delayed onset of the shedding regimes and correspondingly, the production of acoustic tones.
RESUMEN
This paper is concerned with the influence of camber on the noise of a wall-mounted finite airfoil with natural boundary layer transition. Tonal noise measurements taken in an aeroacoustic wind tunnel are presented for airfoils with aspect ratio of 2, NACAxx12 profile and camber between 0 and 6% at 40% chord. The results show camber is an important parameter that determines the operating conditions for which acoustic tone generation occurs and the number and intensity of the tones produced. Airfoils with 0%-2% camber have an acoustic signature that is dominated by a high amplitude primary tone, whereas the spectra of airfoils with higher camber of 4%-6% feature a more pronounced side tone structure. Tonal noise production does not collapse with lift coefficient, demonstrating that the local flow conditions influence the noise source. Tonal noise production is explained in terms of changes to mean flow topology, namely the location of flow separation, which is linked to tonal noise generation. Scaling of airfoil tonal noise is found to vary with angle of attack and pressure gradient. Empirical scaling laws for the primary tone frequency dependence on velocity are also derived for the cambered airfoils.
RESUMEN
A simulation technique to analyse flow-induced noise problems that combines computational fluid dynamics (CFD), the boundary element method (BEM) and an aeroacoustic time-reversal (TR) source localisation method is presented. Hydrodynamic data are obtained from a high-fidelity CFD simulation of flow past a body and aeroacoustic sources are extracted based on Lighthill's acoustic analogy. The incident pressure field on the body due to the aeroacoustic sources is combined with a BEM representation of the body to obtain the spectrum of the direct, scattered and total acoustic pressure fields at far-field microphone locations. The microphone data are then used as input for the time-reversal simulations which are implemented by numerically solving two-dimensional linearized Euler equations. Decomposing the far-field pressure enables the TR simulation of the direct, scattered and total acoustic fields to be performed separately which yields the location and nature of the corresponding aeroacoustic sources. To demonstrate the hybrid CFD-BEM-TR technique, the sound generated by a cylinder in low Mach number cross-flow is considered. The nature of the aeroacoustic sources at the vortex shedding frequency and its second harmonic for the direct, scattered and total fields are identified.
RESUMEN
Numerical simulations are used to investigate the noise generated by the passage of a rotor blade past a fixed object (the blade-passage effects), which was studied by simulating a three-bladed rotor that is supported by a vertical cylindrical tower. To isolate the blade-passage effects, no incoming wind was introduced in the simulation. The symmetric blade was set to zero pitch angle relative to the plane of rotation and two blade-tower distances were investigated. The sliding mesh method was used to simulate the rotation of the blades and Curle's acoustic analogy was used to predict the noise generated from the simulated flow data. Intense force fluctuations occur during the interaction on both the tower and the passing blade, and these are the primary sources of blade-passage noise. The contribution of the force fluctuations on the support tower to blade-passage noise, which previously had been ignored, was revealed to be more significant than that of the blades. The numerical model successfully predicts the noise spectra, which are validated by the very good agreement with experimental measurements. The simulations provide a framework to better understand blade-tower interaction noise in various applications.
RESUMEN
Trailing edge noise from stationary and rotating NACA 0012 airfoils is characterised and compared with a noise prediction based on the semi-empirical Brooks, Pope, and Marcolini (BPM) model. The NACA 0012 is symmetrical airfoil with no camber and 12% thickness to chord length ratio. Acoustic measurements were conducted in an anechoic wind tunnel using a stationary NACA 0012 airfoil at 0° pitch angle. Airfoil self-noise emissions from rotating NACA 0012 airfoils mounted at 0° and 10° pitch angles on a rotor-rig are studied in an anechoic room. The measurements were carried out using microphone arrays for noise localisation and magnitude estimation using beamforming post-processing. Results show good agreement between peak radiating trailing edge noise emissions of stationary and rotating NACA 0012 airfoils in terms of the Strouhal number. Furthermore, it is shown that noise predictions based on the BPM model considering only two dimensional flow effects, are in good agreement with measurements for rotating airfoils, at these particular conditions.
Asunto(s)
Aerosoles , Control de Infecciones/instrumentación , Máscaras , Equipos de Seguridad , Tos , Humanos , Estornudo , TextilesRESUMEN
The response of the boundary layer over an airfoil with cavity to external acoustic forcing, across a sweep of frequencies, was measured. The boundary layer downstream of the cavity trailing edge was found to respond strongly and selectively at the natural airfoil tonal frequencies. This is considered to be due to enhanced feedback. However, the shear layer upstream of the cavity trailing edge did not respond at these frequencies. These findings confirm that an aeroacoustic feedback loop exists between the airfoil trailing edge and a location near the cavity trailing edge.
RESUMEN
This study aimed to determine optimal mitigation strategies in the event of an aerosolized attack with Bacillus anthracis, a category A bioterrorism agent with a case fatality rate of nearly 100% if inhaled and untreated. To simulate the effect of an anthrax attack, we used a plume dispersion model for Sydney, Australia, accounting for weather conditions. We determined the radius of exposure in different sizes of attack scenarios by spore quantity released per second. Estimations of different spore concentrations were then used to calculate the exposed population to inform a Susceptible-Exposed-Infected-Recovered (SEIR) deterministic mathematical model. Results are shown as estimates of the total number of exposed and infected people, along with the burden of disease, to quantify the amount of vaccination and antibiotics doses needed for stockpiles. For the worst-case scenario, over 500,000 people could be exposed and over 300,000 infected. The number of deaths depends closely on timing to start postexposure prophylaxis. Vaccination used as a postexposure prophylaxis in conjunction with antibiotics is the most effective mitigation strategy to reduce deaths after an aerosolized attack and is more effective when the response starts early (2 days after release) and has high adherence, while it makes only a small difference when started late (after 10 days).
Asunto(s)
Carbunco , Bacillus anthracis , Humanos , Carbunco/prevención & control , Australia , Antibacterianos/uso terapéutico , Bioterrorismo/prevención & controlRESUMEN
Study Objectives: Despite the global expansion of wind farms, effects of wind farm noise (WFN) on sleep remain poorly understood. This protocol details a randomized controlled trial designed to compare the sleep disruption characteristics of WFN versus road traffic noise (RTN). Methods: This study was a prospective, seven night within-subjects randomized controlled in-laboratory polysomnography-based trial. Four groups of adults were recruited from; <10 km away from a wind farm, including those with, and another group without, noise-related complaints; an urban RTN exposed group; and a group from a quiet rural area. Following an acclimation night, participants were exposed, in random order, to two separate nights with 20-s or 3-min duration WFN and RTN noise samples reproduced at multiple sound pressure levels during established sleep. Four other nights tested for continuous WFN exposure during wake and/or sleep on sleep outcomes. Results: The primary analyses will assess changes in electroencephalography (EEG) assessed as micro-arousals (EEG shifts to faster frequencies lasting 3-15 s) and awakenings (>15 s events) from sleep by each noise type with acute (20-s) and more sustained (3-min) noise exposures. Secondary analyses will compare dose-response effects of sound pressure level and noise type on EEG K-complex probabilities and quantitative EEG measures, and cardiovascular activation responses. Group effects, self-reported noise sensitivity, and wake versus sleep noise exposure effects will also be examined. Conclusions: This study will help to clarify if wind farm noise has different sleep disruption characteristics compared to road traffic noise.
RESUMEN
This paper presents experimental data concerning the flow and noise generated by a sharp-edged flat plate at low-to-moderate Reynolds number (Reynolds number based on chord of 2.0 × 10(5) to 5.0 × 10(5)). The data are used to evaluate a variety of semi-empirical trailing edge noise prediction methods. All were found to under-predict noise at lower frequencies. Examination of the velocity spectra in the near wake reveals that there are energetic velocity fluctuations at low frequency about the trailing edge. A semi-empirical model of the surface pressure spectrum is derived for predicting the trailing edge noise at low-to-moderate Reynolds number.
Asunto(s)
Ruido , Aeronaves , Diseño de Equipo , Modelos Teóricos , Ruido del Transporte , Espectrografía del Sonido , VientoRESUMEN
This letter presents an experimental study on the tonal noise generated by a sharp-edged flat plate at low-to-moderate Reynolds number. Flow and far-field noise data reveal that, in this particular case, the tonal noise appears to be governed by vortex shedding processes. Also related to the existence of the tonal noise is a region of separated flow slightly upstream of the trailing edge. Hydrodynamic fluctuations at selected vortex shedding frequencies are strongly amplified by the inflectional mean velocity profile in the separated shear layer. The amplified hydrodynamic fluctuations are diffracted by the trailing edge, producing strong tonal noise.
Asunto(s)
Acústica , Aeronaves/instrumentación , Modelos Teóricos , Ruido del Transporte , Viento , HumanosRESUMEN
This paper presents a combined experimental and numerical study that characterises the directivity of blade-tower interaction (BTI) noise. Numerical computations were performed using a hybrid approach combining unsteady Reynolds-averaged Navier-Stokes equations and Curle's acoustic analogy, allowing the noise from the blades and the tower to be computed separately. The noise directivity of the blade and the tower components have a dipole pattern and a monopole-like pattern, respectively; hence, the resulting BTI noise directivity resembles an oval. Partial cancellations between the blade and tower components are also shown to affect the BTI noise directivity.
Asunto(s)
Acústica , RuidoRESUMEN
Respiratory infections transmit through droplets and aerosols generated by the infected individual during respiratory emissions. It is essential to study the flow dynamics of these emissions to develop strategies for mitigating the risk of infection. In particular, the dynamics of droplets expelled during violent exhalations such as sneezing is crucial, but has received little attention to date. Here, for the first time, we present the results of droplet dynamics of 35 sneezes, obtained from four volunteers, using particle tracking velocimetry experiments. Our results reveal a mean droplet velocity of 2-5.4 m/s across the different subjects. These values are significantly lower than what is usually assumed in the studies simulating or replicating sneezes. Furthermore, the large variation in droplet speeds, flow direction, spread angle, and head movement is also quantified. These findings will enable the refinement of models and simulations of sneezes toward improving infection control guidelines.
RESUMEN
Cloth masks can be an alternative to medical masks during pandemics. Recent studies have examined the performance of fabrics under various conditions; however, the performance against violent respiratory events such as human sneezes is yet to be explored. Accordingly, we present a comprehensive experimental study using sneezes by a healthy adult and a tailored image-based flow measurement diagnostic system evaluating all dimensions of protection of commonly available fabrics and their layered combinations: the respiratory droplet blocking efficiency, water resistance, and breathing resistance. Our results reveal that a well-designed cloth mask can outperform a three-layered surgical mask for such violent respiratory events. Specifically, increasing the number of layers significantly increases the droplet blocking efficiency, on average by â¼20 times per additional fabric layer. A minimum of three layers is necessary to resemble the droplet blocking performance of surgical masks, and a combination of cotton/linen (hydrophilic inner layer)-blends (middle layer)-polyester/nylon (hydrophobic outer layer) exhibited the best performance among overall indicators tested. In an optimum three-layered design, the average thread count should be greater than 200, and the porosity should be less than 2%. Furthermore, machine washing at 60 °C did not significantly impact the performance of cloth masks. These findings inform the design of high-performing homemade cloth masks.
Asunto(s)
COVID-19 , Adulto , Humanos , Máscaras , Pandemias , SARS-CoV-2 , TextilesRESUMEN
The vortex generated at the tip of an airfoil such as an aircraft wing, wind turbine blade, submarine fin or propeller blade can dominate its wake and be a significant source of unwanted noise. The data collection presented in this paper consists of measurements of tip vortex formation noise produced by finite length airfoils with flat and rounded tips. These data were obtained using the specialist aeroacoustic test facilities at the Brandenburg University of Technology (BTU) in Cottbus, Germany and a 47-channel planar microphone array. Over 1200 unique test cases with variations in airfoil profile shape, tip geometry, angle of attack and Reynolds number were measured during the experimental campaign. The dataset contains one-third-octave band tip noise spectra that have been processed using Acoular, a Python module for acoustic beamforming.
RESUMEN
Airfoil tip vortex formation noise is a significant noise source in many aerodynamic applications such as aircraft, fans, rotors and propellers. The data collection presented in this paper examines the effects of sinusoidal geometry and porosity on the tip vortex formation noise produced by finite length airfoils. The use of serrated and porous materials is inspired by silent owl-wings and is a promising approach to control flow-induced noise. Noise measurements have been taken using a 47-channel planar microphone array in the anechoic wind tunnel at the Brandenburg University of Technology. Over 2600 unique test cases with variations in sinusoidal tip geometry (amplitude and wavelength) and flat tip porosity were measured during the experimental campaign for a NACA0012 and NACA614 airfoil. The microphone data have been processed using acoustic beamforming software named Acoular to produce one-third-octave band tip noise spectra.
RESUMEN
ABSTRACT: Respiratory activities such as sneezing generate pathogen laden droplets that can deposit in the respiratory tract of a susceptible host to initiate infection. The extent of spread of these droplets determines the safe distance between a patient and health care worker. Here, we have presented a method to visualize the droplets expelled by a sneeze using light-sheet illumination. This method of visualization provides images that clearly resolve the velocities of droplets with minimal overlapping trajectories, towards understanding their flow dynamics. Furthermore, we present the image processing techniques required to perform accurate Particle Tracking Velocimetry to understand the motion of expelled droplets. Flow fields are presented from applying this methodology over multiple sneezes which reveal that less than 1% of droplets expelled travel at velocities greater than 10 m/s and almost 80% of droplets travel at velocities less than 5 m/s. Furthermore, we observe that some droplets are generated by ligament breakup outside the mouth and some are generated within the respiratory tract.
RESUMEN
BACKGROUND: Anthrax is a potential biological weapon and can be used in an air-borne or mail attack, such as in the attack in the United States in 2001. Planning for such an event requires the best available science. Since large-scale experiments are not feasible, mathematical modelling is a crucial tool to inform planning. The aim of this study is to systematically review and evaluate the approaches to mathematical modelling of inhalational anthrax attack to support public health decision making and response. METHODS: A systematic review of inhalational anthrax attack models was conducted using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) criteria. The models were reviewed based on a set of defined criteria, including the inclusion of atmospheric dispersion component and capacity for real-time decision support. RESULTS: Of 13 mathematical modelling studies of human inhalational anthrax attacks, there were six studies that took atmospheric dispersion of anthrax spores into account. Further, only two modelling studies had potential utility for real-time decision support, and only one model was validated using real data. CONCLUSION: The limited modelling studies available use widely varying methods, assumptions, and data. Estimation of attack size using different models may be quite different, and is likely to be under-estimated by models which do not consider weather conditions. Validation with available data is crucial and may improve models. Further, there is a need for both complex models that can provide accurate atmospheric dispersion modelling, as well as for simpler modelling tools that provide real-time decision support for epidemic response.