RESUMEN
The contamination of water with organic pollutants such as dyes and phenols is a serious environmental problem, requiring effective treatment methods. In the present study, a novel nanocomposite was synthesized by intercalating graphene oxide and bentonite clay into MgFeAl-layered triple hydroxide (GO/BENT/LTH), which was characterized using different techniques. The adsorption efficacy of the GO/BENT/LTH nanocomposite was assessed via the removal of two harmful organic water pollutants, namely methyl orange (MO) and 2-nitrophenol (2NP). The obtained results revealed that the maximum adsorption capacities (qmax) of MO and 2NP reached 3106.3 and 2063.5 mg/g, respectively, demonstrating the excellent adsorption performance of the nanocomposite. Furthermore, this study examined the effects of contact time, initial MO and 2NP concentrations, pH, and temperature of the wastewater samples on the adsorptive removal of MO and 2NP by the GO/BENT/LTH nanocomposite. The pH, zeta potential, and FTIR investigations suggested the presence of more than one adsorption mechanism. Thermodynamic investigations elucidated the exothermic nature of the adsorption of MO and 2NP onto the GO/BENT/LTH nanocomposite, with MO adsorption being more sensitive to temperature change. Additionally, regeneration studies revealed a marginal loss in the MO and 2NP removal with the repetitive use of the GO/BENT/LTH nanocomposite, demonstrating its reusability. Overall, the findings of this study reveal the promise of the GO/BENT/LTH nanocomposite for effective water decontamination.
Asunto(s)
Contaminantes Ambientales , Nanocompuestos , Contaminantes Químicos del Agua , Bentonita/química , Adsorción , Contaminantes Químicos del Agua/análisis , Agua , Nanocompuestos/química , Cinética , Concentración de Iones de HidrógenoRESUMEN
Catalyst utilization is a key economic factor in heterogeneous catalysis, particularly, when noble metals are used as the active phase. A huge saving on catalyst cost can be achieved with developing a single atomic layer of the active catalyst on a given cheap support. Besides the economic benefit, single atom catalysts (SACs) have also shown superior activity and selectivity relative to catalytic particles or nanoparticles; yet they are prone to aggregation and deactivation. The development of effective, stable, and commercially viable SACs is still a huge challenge. One of the remaining key obstacles is the ability to easily and effectively tune SACs-support interactions and coordination in a way that enables the production of robust, stable, and versatile SACs. Accordingly, the coordination and interactions between metallic supports and SACs and their impacts on SACs stability and activity are reviewed in this article.
RESUMEN
Despite the photocatalytic organic pollutant degradation using ZnO started in 1910-1911, many challenges are still ahead, and several critical issues have to be addressed. Large band gap, and short life-time of photogenerated electrons and holes are critical issues negatively affect the photocatalytic activity of ZnO. Various approaches have been introduced to overcome these issues including intrinsic doping, extrinsic doping, and heterostructure. This review introduces unique and deep insights into tuning of the photocatalytic activity of ZnO. It starts by description of how to tune the photocatalytic activity of pristine ZnO through tuning its morphology, surface area, exposed face, and intrinsic defects. Afterward, the review explains how the Z-scheme approach succeed to address the redox weakened issue of heterojunction approach. In general, this review provides a clear image that helps the researcher to tune the photocatalytic activity of pristine ZnO and its heterostructure.
RESUMEN
Highly efficient photocatalysts can be fabricated using favorable charge transfer nanocomposite channel structures. This study adopted pulsed laser ablation in liquid (PLAL) to obtain rGO-bridged TiO2/g-C3N4 (rGO-TiO2/g-C3N4) photocatalytic Z-scheme without the need for noble metals. In addition to evaluating the resulting nanocomposite's (comprising rGO nanosheets, TiO2 nanotubes, and g-C3N4 nanosheets) CO2 reduction effectiveness, its chemical, morphological, structural, and optical characteristics were examined using various analytical techniques. The findings revealed a synergistic interaction between g-C3N4 and TiO2, suggesting the presence of unique interfacial bonding, as well as enhanced visible light absorption. Notably, the ternary rGO-TiO2/g-C3N4 Z-scheme exhibits an excellent photocatalytic performance by photocatalytically converting CO2 into CO and CH4, with 81% selectivity towards the CO and 1.91% apparent quantum efficiency at 420 nm. Thus, the findings can pave the way for various Z-scheme systems in wide photocatalytic applications.
RESUMEN
Gold nanoparticles (AuNPs) and carbon nanotubes (CNTs) are increasingly being investigated for cancer management due to their physicochemical properties, low toxicity, and biocompatibility. This study used an eco-friendly technique (laser synthesis) to fabricate AuNP and Au/CNT nanocomposites. AuNPs, Au/CNTs, and CNTs were tested as potential cancer nanotherapeutics on colorectal carcinoma cells (HCT-116) and cervical cancer cells (HeLa) using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay. In addition, the non-cancer embryonic kidney cells HEK-293 were taken as a control in the study. The cell viability assay demonstrated a significant reduction in cancer cell population post 48 h treatments of AuNPs, and Au/CNTs. The average cell viabilities of AuNPs, Au/CNTs, and CNTs for HCT-116 cells were 50.62%, 65.88%, 93.55%, and for HeLa cells, the cell viabilities were 50.88%, 66.51%, 91.73%. The cell viabilities for HEK-293 were 50.44%, 65.80%, 93.20%. Both AuNPs and Au/CNTs showed higher cell toxicity and cell death compared with CNT nanomaterials. The treatment of AuNPs and Au/CNTs showed strong inhibitory action on HCT-116 and HeLa cells. However, the treatment of CNTs did not significantly decrease HCT-116 and HeLa cells, and there was only a minor decrease. The treatment of AuNPs, and Au/CNTs, on normal HEK-293 cells also showed a significant decrease in cell viability, but the treatment of CNTs did not produce a significant decrease in the HEK-293 cells. This study shows that a simplified synthesis technique like laser synthesis for the preparation of high-purity nanomaterials has good efficacy for possible future cancer therapy with minimal toxicity.
RESUMEN
Here, a novel method for synthesis of heterostructured TiO2-MoO3 (MT) nanosheets photocatalyst by utilizing a facile electrochemical method and examined it's photocatalytic activity by the degradation of tetracycline hydrochloride (TCH), a model of organic pollutants, in the presence of peroxymonosulfate (PMS) under solar light irradiation (SL) was reported for the first time. The influence of several factors on the degradation efficiency including the initial concentration of TCH, solution pH, catalyst dosage, PMS concentration, and the existence of inorganic anions was explored. The MT-15/PMS system displayed a promising photocatalytic performance and up to 97% of TCH was degraded in 90 min the rate of the degradation reaction of MT-15/PMS was the highest (0.05299 min-1) compared to 0.00251, 0.00337, 0.00546, 0.00735, 0.01337min-1of TiO2-P25, TiO2-P25/PMS, MoO3, MoO3/PMS, and MT-15 respectively. The enhancement can be attributed to several reasons. First, the 2D morphology of the optimized heterostructure photocatalyst plays a significant role in providing much more active sites on its surface. Next, the boosted light absorption efficiency and higher photoproduced electron-hole pair separation ability, induced by the unique direct transformation of photogenerated electrons from the valance band of TiO2 to the conduction band of MoO3 via the Ti-O-Mo bond formed at the interface of MT heterostructure. Finally, the appropriate accessible reactive sites for the activation of PMS together with the synergistic effect between activation of PMS and photocatalytic processes eased the production of active species for the degradation of pollutants. Based on the scavenger experiments and EPR analysis, hydroxide and sulfate radicals were found to be the dominant free radical active species in the degradation process. Furthermore, the synergistic degradation reaction mechanism was proposed.
Asunto(s)
Contaminantes Ambientales , Titanio , Peróxidos/química , Sulfatos/química , Tetraciclina , Titanio/químicaRESUMEN
Design of direct Z-scheme heterojunction photocatalyst is considered as an effective strategy to fully use the high redox potential photogenerated charge carriers. This work reports a novel method for investigating the photosynergistic performance of the Z-scheme MoO3/Bi2O3/g-C3N4 (MBG) photocatalyst with peroxymonosulfate (PMS) for the solar degradation of tetracycline hydrochloride (TCH), a model of organic pollutants in wastewater. The results showed a better strategy to activate PMS via accelerating the redox cycle (Mo6+/Mo5+), which ultimately induces the successive generation of highly reactive oxygen species. The effect of dosage of the catalyst, PMS, pH of the solution, initial concentrations of TCH and the presence of inorganic anions were investigated. It was found that the degradation of the TCH under sunlight irradiation (SL) was strongly enhanced by the presence of the PMS as an electron acceptor. The MBG/PMS/SL system was able to degrade an initial concentration (40 mg/L) of the TCH solution within 140 min. The good reusability and stability of the MBG catalyst were evaluated by recycling the degradation experiment. The main free radicals are OH and SO4â which played an important role in the degradation reaction were identified by scavenger experiments and confirmed by EPR spectroscopy. X-ray photoelectron spectroscopy (XPS) study revealed the role of molybdenum ion in the activation process of PMS. The possible synergistic degradation reaction mechanism was proposed.
Asunto(s)
Luz Solar , Tetraciclina , Luz , Microondas , PeróxidosRESUMEN
Nano-zinc oxide (n-ZnO) was loaded onto multi-walled carbon nanotubes (MWCNTs) via a hydrothermal process. Here pure n-ZnO used for loading was synthesized by the pulsed-laser ablation technique while MWCNTs were used as received. The synthesized MWCNT/ZnO nanocomposites were characterized using x-ray diffraction, field emission scanning electron microscopy, high resolution transmission electron microscopy and Fourier transform infrared spectrometry. A model has been proposed for the structural nature of the alignment of ZnO on the surface of MWCNTs. The photocatalytic activity in the removal of highly toxic substances like cyanide (CN) was carried out in a special reactor using pulsed 355 nm UV generated by the third harmonic of an Nd:YAG laser. In order to understand the cyanide removal process, the study was carried out at different laser irradiation times, incident laser energies, pH of the solution and dosage of the MWCNT/ZnO nanocomposite. The study demonstrated that the CN removal process by MWCNT/ZnO composite has higher photocatalytic activity than pure n-ZnO and MWCNTs alone. The mechanism for the degradation using MWCNT/ZnO has been schematically explained. It was noticed that the oxidation process activity is affected by the pH of the solution, and after 20 min of UV laser irradiation, approximately 90% of CN had been degraded.
RESUMEN
Synthesis of metal oxide nanostructures through combustion routes is a promising technique owing to its simplicity, rapidity, scalability, and cost-effectiveness. Herein, a sunlight-driven combustion approach is developed to synthesize pristine metal oxides and their heterostructures. Sunlight, a sustainable energy source, is used not only to initiate the combustion reaction but also to create oxygen vacancies on the metal oxide surface. ZnO nanostructures are successfully synthesized using this novel approach, and the products exhibit higher photocatalytic activity in the decomposition of methyl orange (MO) than ZnO nanostructures synthesized by the conventional methods. The higher photocatalytic activity is due to the narrower band gap, higher porosity, smaller and more uniform particle size, surface oxygen vacancies, as well as the enhanced exciton dissociation efficiency induced by the sunlight. Porous Fe3O4 nanostructures are also prepared using this environmentally benign method. Surprisingly, few-layer Bi2O3 nanosheets are successfully obtained using the sunlight-driven combustion approach. Moreover, the approach developed here is used to synthesize Bi2O3/ZnO heterostructure exhibiting a structure of few-layer Bi2O3 nanosheets decorated with ZnO nanoparticles. Bi2O3 nanosheets and Bi2O3/ZnO heterostructures synthesized by sunlight-driven combustion route exhibit higher photocatalytic activity than their counterparts synthesized by the conventional solution combustion method. This work illuminates a potential cost-effective method to synthesize defective metal oxide nanostructures at scale.
RESUMEN
Limited light absorption, inefficient electron-hole separation, and unsuitable positions of conduction band bottom and/or valence band top are three major critical issues associated with high-efficiency photocatalytic water treatment. An attempt has been carried out here to address these issues through the synthesis of direct Z-scheme Cs2O-Bi2O3-ZnO heterostructures via a facile, fast, and economic method: solution combustions synthesis. The photocatalytic performances are examined by the 4-chlorophenol degradation test under simulated sunlight irradiation. UV-vis diffuse reflectance spectroscopy analysis, electrochemical impedance test, and the observed transient photocurrent responses prove not only the significant role of Cs2O in extending light absorption to visible and near-infrared regions but also its involvement in charge carrier separation. Radical-trapping experiments verify the direct Z-scheme approach followed by the charge carriers in heterostructured Cs2O-Bi2O3-ZnO photocatalysts. The Z-scheme charge carrier pathway induced by the presence of Cs2O has emerged as the reason behind the efficient charge carrier separation and high photocatalytic activity.