Optimal ICSI timing on immature oocytes for low prognosis patients under the POSEIDON classification.

BACKGROUND: The optimal timing of performing ICSI on immature oocytes for POSEIDON patients is still unknown to get better early embryonic development outcomes. The purpose of this study was to implore the most appropriate time to carry out ICSI on in vitro maturation GV and MI oocytes for POSEIDON patients. METHODS: Two hundred thirty-nine immature oocytes from 163 POSEIDON patients were prospectively performed ICSI at different timings: P-ICSI (ICSI was performed on in vitro matured oocytes 4-6 h after the first polar body extrusion, N = 81), R-ICSI (ICSI was performed on in vitro matured oocytes less than 4 h after the first polar body extrusion, N = 80), and E-ICSI (ICSI was performed on in vitro matured oocytes the next day after oocytes retrieval, N = 78). Fertilization and embryonic development outcomes were collected and statistically analyzed. Mitochondria distribution of cytoplasm of in vitro matured oocytes with different time cultures after the first polar body (PB1) extrusion was stained. RESULTS: Compared to the E-ICSI group, more day 3 embryos from P-ICSI became blastocysts after sequential culture though without statistical significance (OR = 3.71, 95% CI: 0.94-14.63, P = 0.061). Compared to the E-ICSI group, more embryos from both P-ICSI and R-ICSI groups were clinically used with statistical significance (OR = 5.67, 95% CI: 2.24-14.35, P = 0.000 for P-ICSI embryos; OR = 3.23, 95% CI: 1.23-8.45, P = 0.017 for R-ICSI embryos). Compared to the E-ICSI group, transferred embryos from P-ICSI and R-ICSI had a higher implantation rate though without statistical significance (35.3% for P-ICSI embryos; 9.1% or R-ICSI embryos and 0% for E-ICSI embryos, P = 0.050). Among the three group, there were most healthy babies delivered from the P-ICSI group (5, 1 and 0 for P-ICSI, R-ICSI and E-ICSI respectively). The mitochondria in the cytoplasm of in vitro matured oocytes with a less than 4 h and 4-6 h culture after PB1 extrusion presented semiperipheral and diffused distribution patterns, respectively. CONCLUSIONS: Our results revealed P-ICSI (ICSI was performed on in vitro matured oocytes 4-6 h after the first polar body extrusion) provided the most efficient method to utilize the immaturation oocytes basing on embryos utilization and live birth outcome for low prognosis patients under the POSEIDON classification. The mitochondria distribution of the in vitro matured oocytes' cytoplasm from P-ICSI varied that from R-ICSI.

Prediction model for day 3 embryo implantation potential based on metabolites in spent embryo culture medium.

BACKGROUND: Metabolites in spent embryo culture medium correlate with the embryo's viability. However, there is no widely accepted method using metabolite dada to predict successful implantation. We sought to combine metabolomic profiling of spent embryo culture medium and clinical variables to create an implantation prediction model as an adjunct to morphological screening of day 3 embryos. METHODS: This investigation was a prospective, nested case-control study. Forty-two day 3 embryos from 34 patients were transferred, and the spent embryo culture medium was collected. Twenty-two embryos implanted successfully, and the others failed. Metabolites in the medium relevant to implantation were detected and measured by Liquid Chromatography-Mass Spectrometry. Clinical signatures relevant to embryo implantation were subjected to univariate analysis to select candidates for a prediction model. Multivariate logistical regression of the clinical and metabolomic candidates was used to construct a prediction model for embryo implantation potential. RESULTS: The levels of 13 metabolites were significantly different between the successful and failed groups, among which five were most relevant and interpretable selected by Least Absolute Shrinkage and Selection Operator regression analysis. None of the clinical variables significantly affected day 3 embryo implantation. The most relevant and interpretable set of metabolites was used to construct a prediction model for day 3 embryo implantation potential with an accuracy of 0.88. CONCLUSIONS: Day 3 embryos'implantation potential could be noninvasively predicted by the spent embryo culture medium's metabolites measured by LC-MS. This approach may become a useful adjunct to morphological evaluation of day 3 embryos.

Effects of embryo density on cell number of day 3 embryos cultured in a 30-µl drop: a retrospective cohort study.

For individual cultures, findings on regulating embryo density by changing the microdrop volume are contradictory. The aim of this study was to investigate the relationship between embryo density and the developmental outcome of day 3 embryos after adjusting covariates. In total, 1196 embryos from 206 couples who had undergone in vitro fertilization treatment were analyzed retrospectively. Three embryo densities were used routinely, i.e. one embryo in a drop (30 µl/embryo), two embryos in a drop (15 µl/embryo) and three embryos in a drop (10 µl/embryo). Embryo quality on day 3 was evaluated, both the cell number of day 3 embryos and the proportion of successful implantations served as endpoints. Maternal age, paternal age, antral follicles and level of anti-Müllerian hormone, type of infertility, controlled ovarian stimulation protocol, length of stimulation, number of retrieved oocytes, number of zygotes (two pronuclei) and insemination type were covariates and adjusted. After adjusting fully for all covariates, the cell number of day 3 embryos was significantly increased by 0.40 (95% CI 0.00, 0.79; P = 0.048) and 0.78 (95% CI 0.02, 1.54; P = 0.044) in the 15 µl/embryo and 10 µl/embryo group separately, compared with the 30 µl/embryo group. The proportions of implanted embryos were 42.1%, 48.7% and 0.0% in the 30 µl/embryo, 15 µl/embryo and 10 µl/embryo groups respectively. There was no statistical significance (P = 0.22) between the 30 µl/embryo group and the 15 µl/embryo group. After adjusting for confounders that were significant in univariate analysis, embryo density was still not associated with day 3 embryo implantation potential (P > 0.05). In a 30-µl microdrop, culturing embryos with an embryo density of both 15 and 10 µl/embryo increased the cell number of day 3 embryos, which did not benefit embryo implanting potential, compared with individual culture of 30 µl/embryo.

Study on the disease burden of patients with mucopolysaccharidosis type II in China.

BACKGROUND: In this study, we investigated the patient population of Mucopolysaccharidosis type II (MPS II) in China, understood the basic situation, prevalence and diagnosis and treatment status of the patients, as well as the economic burden of the patients, and analyzed the influencing factors. METHODS: A cross-sectional study focusing on patients with MPS II was conducted in China in 2023. Participants in the study were drawn from the Beijing Zhengyu Mucopolysaccharide Rare Disease Care Center, which is the only non-profit organization in mainland China registered with the civil affairs department that focuses on mucopolysaccharidosis. Data were collected through an online questionnaire, which included basic patient information, disease status, self-assessment of quality of life, diagnosis and treatment, as well as direct and indirect medical costs. The demographic and diagnosis and treatment profile of patients were analyzed by descriptive statistics. Furthermore, univariate and multiple linear regression were used to explore the economic burden and influencing factors of patients with MPS II. RESULTS: The survival data of 145 patients were collected, the majority (98.62%) were male, and 78 were less than or equal to 10 years old. All patients were covered by medical insurance, mainly urban residents (135 cases). In terms of expenses, the 124 patients in the year before the survey incurred a total cost of about 14.7895 million yuan, and the direct economic burden accounted for 87.19%. Univariate analysis showed that age, number of hospitalizations, length of hospital stay, number of outpatient/emergency departments, hematopoietic stem cell transplantation (HSCT), and enzyme replacement therapy (ERT) were significantly associated with the economic burden of disease. Multiple regression analysis showed that the number of hospitalizations, days of hospitalization, number of outpatient/emergency departments and HSCT treatment were the main influencing factors. CONCLUSIONS: This study found that patients with MPS II were difficult to diagnose and easily misdiagnosed, their physical functions were impaired in many aspects. The existing treatment options are not sufficient in terms of economy and effectiveness, and there is also a lack of corresponding policy guarantees and support, which makes patients and their families have to face huge financial pressure.

[Study on optimal model of hypothetical work injury insurance scheme].

OBJECTIVE: To explore an optimal model of hypothetical work injury insurance scheme, which is in line with the wishes of workers, based on the problems in the implementation of work injury insurance in China and to provide useful information for relevant policy makers. METHODS: Multistage cluster sampling was used to select subjects: first, 9 small, medium, and large enterprises were selected from three cities (counties) in Zhejiang Province, China according to the economic development, transportation, and cooperation; then, 31 workshops were randomly selected from the 9 enterprises. Face-to-face interviews were conducted by trained interviewers using a pre-designed questionnaire among all workers in the 31 workshops. RESULTS: After optimization of hypothetical work injury insurance scheme, the willingness to participate in the scheme increased from 73.87%to 80.96%; the average willingness to pay for the scheme increased from 2.21% (51.77 yuan) to 2.38% of monthly wage (54.93 Yuan); the median willingness to pay for the scheme increased from 1% to 1.2% of monthly wage, but decreased from 35 yuan to 30 yuan. The optimal model of hypothetical work injury insurance scheme covers all national and provincial statutory occupational diseases and work accidents, as well as consultations about occupational diseases. The scheme is supposed to be implemented worldwide by the National Social Security Department, without regional differences. The premium is borne by the state, enterprises, and individuals, and an independent insurance fund is kept in the lifetime personal account for each of insured individuals. The premium is not refunded in any event. Compensation for occupational diseases or work accidents is unrelated to the enterprises of the insured workers but related to the length of insurance. The insurance becomes effective one year after enrollment, while it is put into effect immediately after the occupational disease or accident occurs. CONCLUSION: The optimal model of hypothetical work injury insurance scheme actually realizes cross-regional mobility of workers, minimizes regional differences, and embodies the fairness. The proposed model will, to some extent, protect the rights and interests of enterprises, as well as the healthy rights and interests of workers when they are unemployed.

Embryo Density and Its Neutrality in Day-3 Embryo Development: A Retrospective Cohort Study.

Introduction: Many studies have shown that embryo density has an impact on day-3 embryo-developmental outcomes; however, embryo density remains controversial in clinical practice. We aimed to evaluate the association between embryo density and day-3 embryo-developmental outcomes in real world with the largest sample size. Methods: In 2018, we identified 10941 day-3 embryos from all female patients (n = 1568) in the study. The embryos were allocated to three embryonic densities: 30 µl/embryo (individual culture), 15 µl/embryo, and 10 µl/embryo (group culture). The primary outcomes were cleaving speed, quality, and proportion of successful implantations. The generalized estimate equation (GEE) model was used both in the univariate analysis and multivariable logistic regression analyses to investigate the relationship between embryo density and embryo-developmental outcomes. Results: There were 3064, 5695, and 2182 embryos in the 30 µl/embryo group, 15 µl/embryo group, and 10 µl/embryo group, respectively. The proportions of 7-10 cell embryos were 57.2%, 56.1%, and 58.3% in three densities with no statistical significance (P=0.37), respectively. The proportions of morphologically good embryos were 20%, 20.3%, and 20% in three densities with no statistical significance (P=0.85), respectively. Proportions of implanted embryos were 37.7%, 37.1%, and 27.8% with no statistical significance (P=0.36), respectively. After adjustment for confounders, which were significant in the univariate analysis, the embryo density was still not associated with day-3 embryo-cleaving speed, day-3 embryo quality, and day-3 embryo-implanting potential (all P > 0.05). Conclusion: In a 30 µl microdrop, the culturing embryos with embryo densities of 15, 10, and 30 µl/embryo (from zygotes to day 3) had similar developmental outcomes. The embryo density had no impact on day-3 embryo development.

Simultaneous quantification combined with multivariate statistical analysis of multiple chemical markers of Wu Ji Bai Feng Pill by UHPLC-MS/MS.

Wu Ji Bai Feng Pill (WJBFP) is a traditional Chinese medicine (TCM) complex formula, which has been widely used in the treatment of various gynecological disorders. However, the quality control of multiple components in WJBFP is challengeable by using the methods applicable to analysis of several phytochemicals in single herbs or simple herbal preparations. The purpose of this study is to establish an ultra-high performance liquid chromatography coupled with triple quadrupole mass spectrometry (UHPLC-MS/MS) method for the quantitative determination of 20 bioactive compounds in WJBFP. The modified chromatographic conditions were achieved on an Agilent Poroshell 120 EC-C18 column with a gradient elution consisted of 0.1% formic acid in acetonitrile and 0.1% aqueous formic acid (v/v). All analytes were determined using a triple quadrupole mass spectrometry in positive or negative ionization modes with multiple reaction monitoring (MRM) mode. An UHPLC-MS/MS method was optimized and validated for linearity, limits of detection and quantification, precision, repeatability, stability and recovery. The proposed method was applied for the analysis of 20 compounds in 19 batches of commercial WJBFP products. principal component analysis and hierarchical cluster analysis were applied to evaluate intrinsic quality and to identify chemical markers most responsible for quality evaluation. In conclusion, the established method offered speedy and sensitive determination for 20 compounds and is helpful for chemical standardization of commercial WJBFP products.