The Potential of Films as Transmucosal Drug Delivery Systems.

Pharmaceutical films are polymeric formulations used as a delivery platform for administration of small and macromolecular drugs for local or systemic action. They can be produced by using synthetic, semi-synthetic, or natural polymers through solvent casting, electrospinning, hot-melt extrusion, and 3D printing methods, and depending on the components and the manufacturing methods used, the films allow the modulation of drug release. Moreover, they have advantages that have drawn interest in the development and evaluation of film application on the buccal, nasal, vaginal, and ocular mucosa. This review aims to provide an overview of and critically discuss the use of films as transmucosal drug delivery systems. For this, aspects such as the composition of these formulations, the theories of mucoadhesion, and the methods of production were deeply considered, and an analysis of the main transmucosal pathways for which there are examples of developed films was conducted. All of this allowed us to point out the most relevant characteristics and opportunities that deserve to be taken into account in the use of films as transmucosal drug delivery systems.

Preemptive analgesia with ibuprofen increases anesthetic efficacy in children with severe molar: a triple-blind randomized clinical trial.

Molar incisor hypomineralization (MIH) is often accompanied by dental hypersensitivity and difficulty in achieving effective analgesia. OBJECTIVE: This study evaluated the effectiveness of preemptive analgesia in children with severe MIH, post-eruptive enamel breakdown, and hypersensitivity. METHODOLOGY: Ibuprofen (10 mg/kg child weight) or placebo was administered, followed by infiltrative anesthesia and restoration with resin composite. Hypersensitivity was evaluated in five moments. The data were analyzed using the chi-square test, Fisher's exact test, and t-test. RESULTS: Preemptive analgesia provided benefits for the treatment of severe cases of MIH, with an increase in the effectiveness of infiltrative anesthesia and improved patient comfort during the restorative procedure. CONCLUSION: Preemptive analgesia has shown efficacy in reducing hypersensitivity during restorative dental procedures, evidencing the significance of this study for patients with MIH and hypersensitivity.

Towards the advance of a novel iontophoretic patch for needle-free buccal anesthesia.

The aim of this work was to develop a mucoadhesive iontophoretic patch for anesthetic delivery in the buccal epithelium. The patch was comprised of three different layers, namely i) drug release (0.64 cm2); ii) mucoadhesive (1.13 cm2); and iii) backing (1.13 cm2). Prilocaine and lidocaine hydrochlorides were used as model drugs (1:1 ratio, 12.5 mg per unit). An anode electrode (0.5 cm2 spiral silver wire) was placed in between the drug release and mucoadhesive/backing layers to enable iontophoresis. Surface microscopy; mechanical and in vitro mucoadhesive properties; drug release kinetics and mechanism; and drug permeation through the porcine esophageal epithelium were assessed. Topographic analysis evidenced differences in the physical structures for the several layers. All layers presented suitable handling properties i.e., flexibility, elasticity and resistance. Both the release and mucoadhesive layers presented features of a soft and tough material, while the backing layer matched the characteristics of a hard and brittle material. A synergy between the drug release and mucoadhesive layers on the mucoadhesive force and work of adhesion of the tri-layered patch was observed. Passive drug release of both drugs fitted to First-order, Hixson-Crowell and Weibull kinetic models; and the release mechanism was attributed to anomalous transport. Iontophoresis remarkably enhanced the permeation of both drugs, but mainly prilocaine through the mucosa as evidenced by the permeability coefficient parameter (3.0-fold). The amount of these amino amide salts retained in the mucosa were also equally enhanced (4.7-fold), while the application of a tiny constant electric current (1 mA·cm-2·h-1) significantly decreased the lag time for lidocaine permeation by about 45%. In view of possible in vitro / in vivo correlations, the buccal iontophoretic patch displays a promising strategy for needle-free and patient-friendly local anesthesia in dentistry.

Preemptive analgesia with ibuprofen increases anesthetic efficacy in children with severe molar hypomineralization: a triple-blind randomized clinical trial

Abstract Molar incisor hypomineralization (MIH) is often accompanied by dental hypersensitivity and difficulty in achieving effective analgesia. Objective: This study evaluated the effectiveness of preemptive analgesia in children with severe MIH, post-eruptive enamel breakdown, and hypersensitivity. Methodology: Ibuprofen (10 mg/kg child weight) or placebo was administered, followed by infiltrative anesthesia and restoration with resin composite. Hypersensitivity was evaluated in five moments. The data were analyzed using the chi-square test, Fisher's exact test, and t-test. Results: Preemptive analgesia provided benefits for the treatment of severe cases of MIH, with an increase in the effectiveness of infiltrative anesthesia and improved patient comfort during the restorative procedure. Conclusion: Preemptive analgesia has shown efficacy in reducing hypersensitivity during restorative dental procedures, evidencing the significance of this study for patients with MIH and hypersensitivity.

Quality by Design-driven investigation of the mechanical properties of mucoadhesive films for needleless anesthetics administration

Objectives: To systematically evaluate the effects of hydroxypropyl methyl cellulose (HPMC) type (E5LV, E15LV, and K100LV); plasticizer type (glycerol and mannitol), plasticizer loading (0.12 and 0.24% w/w); and loading of prilocaine and lidocaine hydrochlorides combined at 1:1 ratio (0 and 47 mg/cm2) in the mechanical properties of buccal films. Methods: A quality by design (QbD) approach based on a full factorial design (3 x 23) and complementarily multivariate statistical tools i.e., principal component analysis (PCA), response surface methodology (RSM), and correlation matrix were used in this pursuit. The thickness, elongation at break, tensile strength, force at break, and Young`s modulus of the anesthetic buccal films obtained by solvent casting were assessed. Results: The QbD, PCA and RSM altogether demonstrated that all studied formulation variables, mainly the drug loading, affect the mechanical properties of the films at different significance levels. The multivariate analysis yielded the modelling of elongation at break, tensile strength, and force at break, which significantly correlated with each other. The drugs exerted a synergic plasticizing effect on the films, and the use of HPMC K100 LV (with greater hydroxypropyl substitution degree and viscosity) and mannitol favored their elasticity and resistance. Furthermore, the majority of the films fulfilled the requirements for buccal administration due to their softness and mechanical resistance. Conclusion: Mannitol is suitable plasticizer for manufacturing HPMC anesthetic buccal films with improved mechanical properties. These results are a step forward in the rational development of formulations for the replacement of needles in dentistry