Halogen Bonding Tripodal Metallo-Receptors for Phosphate Recognition and Sensing in Aqueous-Containing Organic Media.

The anion recognition and electrochemical anion-sensing properties of halogen-bonding (XB) tripodal zinc(II) receptors strategically designed and constructed for tetrahedral anion guest binding are described. The XB tris(iodotriazole)-containing hosts exhibit high affinities and selectivities for inorganic phosphate over other more basic, mono-charged oxoanions such as acetate and the halides in a competitive CD3 CN/D2 O (9 : 1 v/v) aqueous solvent mixture. 1 H NMR anion binding and electrochemical voltammetric anion sensing studies with redox-active ferrocene functionalised metallo-tripodal receptor analogues, reveal each of the XB tripods as superior anion complexants when compared to their tris(prototriazole)-containing, hydrogen bonding (HB) counterparts, not only exemplifying the halogen bond as a strong alternative interaction to the traditional hydrogen bond for molecular recognition but also providing rare evidence of the ability of XB receptors to preferentially bind the "harder" phosphate oxoanion over the "softer" and less hydrated halides in aqueous containing media.

Heterodinuclear Mg(II)M(II) (M=Cr, Mn, Fe, Co, Ni, Cu and Zn) Complexes for the Ring Opening Copolymerization of Carbon Dioxide/Epoxide and Anhydride/Epoxide.

The catalysed ring opening copolymerizations (ROCOP) of carbon dioxide/epoxide or anhydride/epoxide are controlled polymerizations that access useful polycarbonates and polyesters. Here, a systematic investigation of a series of heterodinuclear Mg(II)M(II) complexes reveals which metal combinations are most effective. The complexes combine different first row transition metals (M(II)) from Cr(II) to Zn(II), with Mg(II); all complexes are coordinated by the same macrocyclic ancillary ligand and by two acetate co-ligands. The complex syntheses and characterization data, as well as the polymerization data, for both carbon dioxide/cyclohexene oxide (CHO) and endo-norbornene anhydride (NA)/cyclohexene oxide, are reported. The fastest catalyst for both polymerizations is Mg(II)Co(II) which shows propagation rate constants (kp ) of 34.7 mM-1 s-1 (CO2 ) and 75.3 mM-1 s-1 (NA) (100 °C). The Mg(II)Fe(II) catalyst also shows excellent performances with equivalent rates for CO2 /CHO ROCOP (kp =34.7 mM-1 s-1 ) and may be preferable in terms of metallic abundance, low cost and low toxicity. Polymerization kinetics analyses reveal that the two lead catalysts show overall second order rate laws, with zeroth order dependencies in CO2 or anhydride concentrations and first order dependencies in both catalyst and epoxide concentrations. Compared to the homodinuclear Mg(II)Mg(II) complex, nearly all the transition metal heterodinuclear complexes show synergic rate enhancements whilst maintaining high selectivity and polymerization control. These findings are relevant to the future design and optimization of copolymerization catalysts and should stimulate broader investigations of synergic heterodinuclear main group/transition metal catalysts.

Heterodinuclear Zn(II), Mg(II) or Co(III) with Na(I) Catalysts for Carbon Dioxide and Cyclohexene Oxide Ring Opening Copolymerizations.

A series heterodinuclear catalysts, operating without co-catalyst, show good performances for the ring opening copolymerization (ROCOP) of cyclohexene oxide and carbon dioxide. The complexes feature a macrocyclic ligand designed to coordinate metals such as Zn(II), Mg(II) or Co(III), in a Schiff base 'pocket', and Na(I) in a modified crown-ether binding 'pocket'. The 11 new catalysts are used to explore the influences of the metal combinations and ligand backbones over catalytic activity and selectivity. The highest performance catalyst features the Co(III)Na(I) combination, [N,N'-bis(3,3'-triethylene glycol salicylidene)-1,2-ethylenediamino cobalt(III) di(acetate)]sodium (7), and it shows both excellent activity and selectivity at 1 bar carbon dioxide pressure (TOF=1590 h-1 , >99 % polymer selectivity, 1 : 10: 4000, 100 °C), as well as high activity at higher carbon dioxide pressure (TOF=4343 h-1 , 20 bar, 1 : 10 : 25000). Its rate law shows a first order dependence on both catalyst and cyclohexene oxide concentrations and a zeroth order for carbon dioxide pressure, over the range 10-40 bar. These new catalysts eliminate any need for ionic or Lewis base co-catalyst and instead exploit the coordination of earth-abundant and inexpensive Na(I) adjacent to a second metal to deliver efficient catalysis. They highlight the potential for well-designed ancillary ligands and inexpensive Group 1 metals to deliver high performance heterodinuclear catalysts for carbon dioxide copolymerizations and, in future, these catalysts may also show promise in other alternating copolymerization and carbon dioxide utilizations.

Titanium ONN-(phenolate) Alkoxide Complexes: Unique Reaction Kinetics for Ring-Opening Polymerization of Cyclic Esters.

The synthesis, characterization, and polymerization kinetics of four new titanium ONN-(phenolate) alkoxide catalysts were studied. Each catalyst is fluxional at room temperature, suggesting the ligand amine arm may be labile, but adopts a fac geometry in solution at low temperature (223 K) and in the solid state. All catalysts are active for the ring-opening polymerization of both ε-caprolactone (CL) and rac-lactide (LA). GPC analysis indicates that the well-known coordination-insertion mechanism is being followed. However, whereas the typical first-order dependence on monomer concentration is observed in CL, an unexpected zeroth-order dependence is observed with LA. This suggests that, in the case of LA, catalyst saturation occurs and a Michaelis-Menten model can be used to explain the kinetics. An initial mechanism is discussed within this model that proposes CL polymerization proceeds by a 7-coordinate intermediate, whereas LA polymerization adopts a 6-coordinate intermediate, facilitated by the ligand amine arm. Attempts to isolate catalyst-monomer intermediates are ongoing.

A comparison of methods used to secure pediatric endotracheal tubes using a live human dermal model.

BACKGROUND: Endotracheal intubation is a common lifesaving procedure. An in situ endotracheal tube (ETT) must be secured in position to avoid displacement and potentially life-threatening complications. Adhesive tapes form the most common intraoperative ETT stabilization methods. Limited published data are available to guide the clinical decision regarding ETT taping method. We performed an interventional study aiming to establish which of many commonly employed ETT tape/supplementary adhesive methods provides the most resistance to ETT distraction. METHODS: An experiment was undertaken to measure the force required to distract an ETT secured to a live dermal model with 24 different ETT securing methods comprising six types of tape alone and in combination with one of three supplementary adhesives. The primary measurement was the peak force (Newtons) required to distract a secured ETT 3 cm. RESULTS: A total of 1,164 measurements were made. The mean force required to distract the ETT ranged from 7.8 to 21.8 Newtons. The combination of Cloth Adhesive™ + Mastisol® had the greatest observed mean distraction force, as well as the greatest estimated lower and upper confidence limits. CONCLUSIONS: There are significant differences in force required to distract an ETT based on taping methods.

RéSUMé: CONTEXTE: L'intubation endotrachéale est une intervention critique courante. Le tube endotrachéal (TET) in situ doit être fixé en position adéquate pour éviter qu'il ne se déplace et provoque des complications potentiellement fatales. Les bandes adhésives sont la méthode de stabilisation peropératoire de TET la plus fréquemment utilisée. Il n'existe que peu de données publiées pour guider la décision clinique quant à la méthode de fixation du TET. Nous avons réalisé une étude interventionnelle visant à établir laquelle des nombreuses méthodes couramment employées de bandes adhésives ou de méthodes adhésives supplémentaires du TET procurait la meilleure protection contre un déplacement du TET. MéTHODE: Une expérience a été menée pour mesurer la force nécessaire à déplacer/déloger un TET fixée à un modèle de derme vivant avec 24 méthodes différentes de sécurisation du TET, comprenant six types de ruban adhésif seuls et en combinaison avec l'un de trois adhésifs supplémentaires. La mesure principale était la force maximale (en newton) nécessaire pour déplacer un TET sécurisée de 3 cm. RéSULTATS: Au total, 1164 mesures ont été effectuées. La force moyenne requise pour déplacer le TET allait de 7,8 à 21,8 newtons. La combinaison du ruban Cloth Adhesive™ + Mastisol® a entraîné la plus grande force de déplacement moyenne observée, ainsi que les plus grandes limites inférieure et supérieure estimées des intervalles de confiance. CONCLUSION: Il existe des différences significatives dans la force nécessaire pour déplacer un TET en fonction des méthodes de fixation utilisées.

Indium Catalysts for Low-Pressure CO2/Epoxide Ring-Opening Copolymerization: Evidence for a Mononuclear Mechanism?

The alternating copolymerization of CO2/epoxides is a useful means to incorporate high levels of carbon dioxide into polymers. The reaction is generally proposed to occur by bimetallic or bicomponent pathways. Here, the first indium catalysts are presented, which are proposed to operate by a distinct mononuclear pathway. The most active and selective catalysts are phosphasalen complexes, which feature ligands comprising two iminophosphoranes linked to sterically hindered ortho-phenolates. The catalysts are active at 1 bar pressure of carbon dioxide and are most effective without any cocatalyst. They show low-pressure activity (1 bar pressure) and yield polymer with high carbonate linkage selectivity (>99%) and isoselectivity ( Pm > 70%). Using these complexes, it is also possible to isolate and characterize key catalytic intermediates, including the propagating indium alkoxide and carbonate complexes that are rarely studied. The catalysts are mononuclear under polymerization conditions, and the key intermediates show different coordination geometries: the alkoxide complex is pentacoordinate, while the carbonate is hexacoordinate. Kinetic analyses reveal a first-order dependence on catalyst concentration and are zero-order in carbon dioxide pressure; these findings together with in situ spectroscopic studies underpin the mononuclear pathway. More generally, this research highlights the future opportunity for other homogeneous catalysts, featuring larger ionic radius metals and new ligands, to operate by mononuclear mechanisms.

New Coordination Modes for Modified Schiff Base Ti(IV) Complexes and Their Control over Lactone Ring-Opening Polymerization Activity.

A series of eight new bis(alkoxy)bis(phenoxy-imine)titanium(IV) catalysts, coordinated by Schiff base ligands derived from o-vanillin (2-hydroxy-3-methoxybenzaldehyde), show good activity and control for the ring-opening polymerization of ε-caprolactone and ω-pentadecalactone. The new complexes are easily prepared in two high-yield steps from commercial reagents. The new ligands can all adopt two different coordination modes, depending on the steric bulk on the imine: a six-membered N-O chelate and/or a five-membered O-O chelate. The complexes show three different structures, depending on the ligand coordination mode: type A (N-O:N-O), type B (N-O:O-O), and type C (O-O:O-O). In all cases, the structures were confirmed in solution using variable temperature NMR spectroscopy and in the solid state using X-ray crystallography. The complex structure influences the polymerization rate, with the catalytic activities decreasing in the order: type C > type B > type A for both monomers. Overall, the work demonstrates potential to use these new ligands to access particular coordination modes, which allows enhancement of catalytic activity.

Groups 1, 2 and Zn(II) Heterodinuclear Catalysts for Epoxide/CO2 Ring-Opening Copolymerization.

A series of heterodinuclear complexes are reported where both Zn(II) and a metal from Group 1 or 2 are chelated by a macrocyclic diphenolate-tetra-amine ligand. The complexes are characterized in the solid state, where relevant by single crystal X-ray crystallography and elemental analysis, and in solution, using NMR spectroscopy and mass spectrometry. The complex synthesis is achieved by reaction of the ligand with diethyl zinc to form the monozinc complex, in situ, followed by subsequent coordination of the second metal; this method enables heterodinuclear conversions >90% as determined by NMR spectroscopy. Alternatively, the same heterodinuclear complexes are accessed by reaction between the two homodinuclear complexes at elevated temperatures for extended periods. These findings suggest that most of the heterodinuclear complexes are the thermodynamic reaction products; the only exception is the Na(I)/Zn(II) complex which is unstable with respect to the homodinuclear counterparts. The catalytic activities and selectivity of the stable heterodinuclear complexes are compared, against each other and the relevant homodinuclear analogues, for the ring-opening copolymerization of CO2 and CHO. Nearly all the heterodinuclear complexes are less active than the dizinc analogues, but the Mg(II)/Zn(II) catalyst is more active. The co-ligand influences the product selectivity, with iodide ligands resulting in cyclic carbonate formation and carboxylate ligands giving a high selectivity for polycarbonate.

[MoO(S2)2L]1- (L = picolinate or pyrimidine-2-carboxylate) Complexes as MoSx-Inspired Electrocatalysts for Hydrogen Production in Aqueous Solution.

Crystalline and amorphous molybdenum sulfide (Mo-S) catalysts are leaders as earth-abundant materials for electrocatalytic hydrogen production. The development of a molecular motif inspired by the Mo-S catalytic materials and their active sites is of interest, as molecular species possess a great degree of tunable electronic properties. Furthermore, these molecular mimics may be important for providing mechanistic insights toward the hydrogen evolution reaction (HER) with Mo-S electrocatalysts. Herein is presented two water-soluble Mo-S complexes based around the [MoO(S2)2L2]1- motif. We present 1H NMR spectra that reveal (NEt4)[MoO(S2)2picolinate] (Mo-pic) is stable in a d6-DMSO solution after heating at 100 °C, in air, revealing unprecedented thermal and aerobic stability of the homogeneous electrocatalyst. Both Mo-pic and (NEt4)[MoO(S2)2pyrimidine-2-carboxylate] (Mo-pym) are shown to be homogeneous electrocatalysts for the HER. The TOF of 27-34 s-1 and 42-48 s-1 for Mo-pic and Mo-pym and onset potentials of 240 mV and 175 mV for Mo-pic and Mo-pym, respectively, reveal these complexes as promising electrocatalysts for the HER.

Synthesis, Structure, and Photophysical Properties of Mo2(NN)4 and Mo2(NN)2(T(i)PB)2, Where NN = N,N'-Diphenylphenylpropiolamidinate and T(i)PB = 2,4,6-Triisopropylbenzoate.

Two dimolybdenum compounds featuring amidinate ligands with a C≡C bond, Mo2(NN)4 (I), where NN = N,N'-diphenylphenylpropiolamidinate, and trans-Mo2(NN)2(T(i)PB)2 (II), where T(i)PB = 2,4,6-triisopropylbenzoate, have been prepared and structurally characterized by single-crystal X-ray crystallography. Together with Mo2(DAniF)4 (III), where DAniF = N,N'-bis(p-anisyl)formamidinate, all three compounds have been studied with steady-state UV-vis, IR, and time-resolved spectroscopy methods. I and II display intense metal to ligand charge transfer (MLCT). Singlet state (S1) lifetimes of I-III are determined to be 0.7, 19.1, and 2.0 ps, respectively. All three compounds have long-lived triplet state (T1) lifetimes around 100 µs. In femtosecond time-resolved infrared (fs-TRIR) experiments, one ν(C≡C) band is observed at the S1 state for I but two for II, which indicate different patterns of charge distribution. The electron would have to be localized on one NN ligand in I and partially delocalized over two NN ligands in II to account for the observations. The result is a standard showcase of excited-state mixed valence in coordination compounds.

Electronic and Spectroscopic Properties of Avobenzone Derivatives Attached to Mo2 Quadruple Bonds: Suppression of the Photochemical Enol-to-Keto Transformation.

From the reactions between Mo2(T(i)PB)4, where T(i)PB is 2,4,6-triisopropylbenzoate, and 2 equiv of the acids 4-formylbenzoic acid, HBzald; 4-(3-oxo-3-phenylpropanoyl)benzoic acid, HAvo; and 4-(2,2-difluoro-6-phenyl-2H-1λ(3),3,2λ(4)-dioxaborinin-4-yl)benzoic acid, HAvoBF2, the compounds Mo2(T(i)PB)2(Bzald)2, I; Mo2(T(i)PB)2(Avo)2, II; and Mo2(T(i)PB)2(AvoBF2)2, III, have been isolated. Compounds I and II are red, and compound III is blue. The new compounds have been characterized by (1)H NMR, MALDI-TOF MS, steady-state absorption and emission spectroscopies, and femtosecond and nanosecond time-resolved transient absorption and infrared spectroscopies. Electronic structure calculations employing density functional theory and time-dependent density functional theory have been carried out to aid in the interpretation of these data. These compounds have strong metal-to-ligand charge transfer, MLCT, and transitions in the visible region of their spectra, and these comprise the S1 states having lifetimes ∼5-15 ps. The triplet states are Mo2δδ* with lifetimes in the microseconds. The spectroscopic properties of I and II are similar, whereas the planarity of the ligand in III greatly lowers the energy of the MLCT and enhances the intensity of the time-resolved spectra. The Mo2 unit shifts the ground state equilibrium entirely to the enol form and quenches the degradation pathways of the avobenzone moiety.

Photophysical properties of cis-Mo2 quadruply bonded complexes and observation of photoinduced electron transfer to titanium dioxide.

The compounds cis-Mo2(DAniF)2(L)2 have been prepared, where DAniF = (N,N')-p-dianisyl formamidinate and L = thienyl-2-carboxylate (Th), 2,2'-bithienyl-5-carboxylate (BTh), and 2,2':5',5″-terthienyl-5-carboxylate (TTh). The compounds have been characterized by proton nuclear magnetic resonance ((1)H NMR), ultraviolet-visible (UV-vis) absorption and emission, differential pulse voltammetry, and time-resolved transient absorption and infrared (IR) spectroscopy. An X-ray crystal structure was obtained for the thienyl complex. The related salt [(n)Bu4N]2[Mo2(DAniF)2(TTh-CO2)2], where TTh-CO2 = 2,2':5',2″-terthienyl-5,5″-dicarboxylate, has also been prepared and employed in the attachment of the complex to TiO2 nanoparticles. The latter have been characterized by ground-state Fourier transform infrared spectroscopy (FTIR) and femtosecond time-resolved IR spectroscopy. The time-resolved data provide evidence for sub-picosecond charge injection from the Mo2 center to the semiconducting oxide particle.

Mo2 paddlewheel complexes functionalized with a single MLCT, S1 infrared-active carboxylate reporter ligand: preparation and studies of ground and photoexcited states.

From the reactions between Mo2(DAniF)3pivalate (DAniF = N,N'-di(p-anisyl)formamidinate) and the carboxylic acids LH, the title compounds Mo2(DAniF)3L have been prepared and characterized: compounds I (L = O2CC≡CPh), II (L = O2CC4H2SC≡CH), and III (L = O2CC6H4-p-CN). The new compounds have been characterized in their ground states by spectroscopy ((1)H NMR, ultraviolet-visible absorption, near-infrared absorption, and steady state emission), cyclic voltammetry, and density functional theory calculations. The compounds show strong metal Mo2 to ligand L δ-π* transitions in their visible spectra. The nature of the S1 (1)MLCT and T1 states has been probed by time-resolved (femtosecond and nanosecond) transient absorption and infrared spectroscopy. The observed shifts of the C≡C and C≡N vibrational modes are found to be consistent with the negative charge being localized on the single L in the S1 states, while the T1 states are (3)Mo2 δδ*. The present results are compared to earlier studies of the photoexcited states of trans-Mo2(2,4,6-triisopropylbenzoate)2L2 compounds that have been assigned as either localized or delocalized.

Unusually efficient pyridine photodissociation from Ru(II) complexes with sterically bulky bidentate ancillary ligands.

The introduction of steric bulk to the bidentate ligand in [Ru(tpy)(bpy)(py)](2+) (1; tpy = 2,2':2',6″-terpyridine; bpy = 2,2'-bipyridine; py = pyridine) to provide [Ru(tpy)(Me2bpy)(py)](2+) (2; Me2bpy = 6,6'-dimethyl-2,2'-bipyridine) and [Ru(tpy)(biq)(py)](2+) (3; biq = 2,2'-biquinoline) facilitates photoinduced dissociation of pyridine with visible light. Upon irradiation of 2 and 3 in CH3CN (λirr = 500 nm), ligand exchange occurs to produce the corresponding [Ru(tpy)(NN)(NCCH3)](2+) (NN = Me2bpy, biq) complex with quantum yields, Φ500, of 0.16(1) and 0.033(1) for 2 and 3, respectively. These values represent an increase in efficiency of the reaction by 2-3 orders of magnitude as compared to that of 1, Φ500 < 0.0001, under similar experimental conditions. The photolysis of 2 and 3 in H2O with low energy light to produce [Ru(tpy)(NN)(OH2)](2+) (NN = Me2bpy, biq) also proceeds rapidly (λirr > 590 nm). Complexes 1-3 are stable in the dark in both CH3CN and H2O under similar experimental conditions. X-ray crystal structures and theoretical calculations highlight significant distortion of the planes of the bidentate ligands in 2 and 3 relative to that of 1. The crystallographic dihedral angles defined by the bidentate ligand, Me2bpy in 2 and biq in 3, and the tpy ligand were determined to be 67.87° and 61.89°, respectively, whereas only a small distortion from the octahedral geometry is observed between bpy and tpy in 1, 83.34°. The steric bulk afforded by Me2bpy and biq also result in major distortions of the pyridine ligand in 2 and 3, respectively, relative to 1, which are believed to weaken its σ-bonding and π-back-bonding to the metal and play a crucial role in the efficiency of the photoinduced ligand exchange. The ability of 2 and 3 to undergo ligand exchange with λirr > 590 nm makes them potential candidates to build photochemotherapeutic agents for the delivery of drugs with pyridine binding groups.

On the molecular structure and bonding in a lithium bismuth porphyrin complex: LiBi(TPP)(2).

A new BiLi porphyrin sandwich compound, LiBi(TPP)2 has been synthesized and characterized (TPP=tetraphenylporphyrin). The unique molecular structure of LiBi(TPP)2 is such that the Bi sits between the porphyrins and is directed towards the Li. This complex was shown to remain intact in solution by temperature-dependent 2D NMR spectroscopy. In order to investigate the potential interaction between these two metals, DFT calculations were used and showed a Bi 6s orbital polarized towards Li which could be indicative of a BiLi dative bond. This bond is remarkably short, 2.87 Å, and is among the shortest BiLi distances seen in a small molecule.

Synthesis and catalytic activity of single-site group V alkoxide complexes for the ring-opening polymerization of ε-caprolactone.

The synthesis, characterization, and ring-opening polymerization (ROP) activity of a family of niobium and tantalum alkoxide catalysts was studied. The final catalysts are made in a two-step synthesis, first by reacting the desired homoleptic metal ethoxide with a phenolketoimine ligand to form a series of synthetic intermediates, followed by reaction with catechol to produce a catalytic platform with a single ethoxide initiator. By using two separate ligands, the electronic properties of the catalyst can be tuned, and the molecular weight of the polymer can be increased. It was found that synthetic intermediates adopted a mer geometry both in solution and in the solid state. This mer geometry was retained for the final catechol derivatives, however in one case, where catechol was substituted for 3-methoxycatechol, the molecule adopted a highly distorted fac geometry. Catalytic ROP activity of the synthetic intermediates and final catechol derivatives with ε-caprolactone was studied through a kinetic analysis. In all seven cases studied the reactions proceeded through the expected coordination-insertion mechanism, following pseudo first-order kinetics and increasing in Mn linearly vs. conversion. The single-initiator catechol derivatives increased the Mn by three times compared to that of the three-initiator synthetic intermediates with little decrease in the overall reaction rate. Both the nature of the ligand and metal were found to impact the rate of reaction in these systems. By switching from an electron donating ligand to an electron withdrawing ligand, the rate was found to nearly double. Tantalum species were faster than their niobium counterparts by ∼3 times in the synthetic intermediates and ∼1.5 times in the catechol derivatives. This observed periodicity supports recent literature findings in this area.

Metal-metal quadruple bonds supported by 5-ethynylthiophene-2-carboxylato ligands: preparation, molecular and electronic structures, photoexcited state dynamics, and application as molecular synthons.

From the reaction between M2(T(i)PB)4 and 2 equiv of 5-ethynylthiophene-2-carboxylic acid (H-ThCCH) in toluene, the complexes trans-M2(T(i)PB)2(ThCCH)2, where M = Mo (I) or W (II) and T(i)PB = 2,4,6-triisopropyl benzoate, have been isolated and characterized by (1)H NMR, IR, MALDI-TOF MS, UV-vis, steady-state emission, transient absorption, and time-resolved infrared (TRIR) spectroscopies and single-crystal X-ray crystallography for I. The molecular structure of I confirms the trans-substitution pattern and the extended conjugation of the ethynylthienyl ligands via interaction with the Mo2δ orbital. The HOMO of both I and II is the M2δ orbital, and the intense color of the compounds (I is red and II is blue) is due to the M2δ-to-ThCCH (1)MLCT transition. The S1 states for I and II are (1)MLCT. The T1 state is (3)MLCT for II, but (3)MoMoδδ* for I. The TRIR spectra of the ν(C≡C) stretch in the MLCT states are consistent with the delocalization of the electron over both ThCCH ligands. Compound I is shown to be a synthon for the preparation of trans-Mo2(T(i)PB)2(ThCCPh)2 (III) and trans-Mo2(T(i)PB)2(ThCCAuPPh3)2 (IV). Both III and IV have been characterized spectroscopically and by single-crystal X-ray diffraction. The structure of III indicates the extended π-conjugation of the trans-ethynyl-thienyl units extends to the added phenyl rings.

Selective photoinduced ligand exchange in a new tris-heteroleptic Ru(II) complex.

The complex cis-[Ru(biq)(phen)(CH3CN)2](2+) (1, biq = 2,2'-biquinoline, phen = 1,10-phenathroline) displays selective photosubstitution of only one CH3CN ligand with a solvent molecule upon irradiation with low energy light (λ(irr) ≥ 550 nm), whereas both ligands exchange with λ(irr) ≥ 420 nm. In contrast, [Ru(phen)2(CH3CN)2](2+) (2) and [Ru(biq)2(CH3CN)2](2+) (3) exchange both CH3CN ligands with similar rates upon irradiation with a broad range of wavelengths. The photolysis of 1 in the presence of pyridine (py) results in the formation of the intermediate cis-[Ru(biq)(phen)(py)(MeCN)](2+), which was isolated and characterized by X-ray crystallography, revealing that the CH3CN positioned trans to the phen ligand is more photolabile than that positioned trans to the biq ligand when irradiated with low energy light. These results are explained using the calculated stabilities of the two possible products, together with the molecular orbitals involved in the lowest energy excited state.

Coordination of N,N-chelated Re(CO)3Cl units across a Mo2 quadruple bond: synthesis, characterization, and photophysical properties of a Re-Mo2-Re triad and its component pieces.

2-(2-Pyridyl)-4-methylthiazole carboxylic acid (PMT-H) and rhenium tricarbonyl chloride react to form the red crystalline compound fac-Re(PMT-H)(CO)3Cl, I, which is an analog of the well-known Re(bpy)(CO)3Cl molecule, where bpy is 2,2'-bipyridine. The acids PMT-H (2 equiv) and Re(PMT-H)(CO)3Cl (2 equiv) also react with Mo2(T(i)PB)4 (T(i)PB = 2,4,6-triisopropylbenzoate) in toluene to give the red compound trans-Mo2(T(i)PB)2(PMT)2, II, and the royal blue compound trans-Mo2(T(i)PB)2[(PMT)Re(CO)3Cl]2, III, respectively. The X-ray and spectroscopic characterization of I confirms its close relationship with Re(bpy)(CO)3Cl, as does the spectroscopic characterization of compounds II and III as analogs of other compounds of the form trans-M2(TiPB)2L2, where L is a π-acceptor ligand. Electronic structure calculations on model compounds II' and III', where formate ligands substitute for T(i)PB, show that the highest occupied molecular orbital (HOMO) in II is Mo2δ. When the Re(CO)3Cl unit is attached to the PMT ligand to form III, this orbital is stabilized significantly and now becomes associated with a close in energy band of Re d(6), t2g type orbitals. Oxidation of III is shown to be Mo2-based, as evident by EPR spectroscopy, and the lowest-energy electronic absorption corresponds to a Mo2δ-to-PMT π* transition. The S1 states in both II and III are metal-to-ligand charge-transfer (MLCT), and the lowest-energy triplet sate, T1 is (3)MoMoδδ*, as evidenced by its steady state emission spectral features. The excited states of compounds I (T1) and III (S1 and T1) have been investigated by time-resolved infrared spectroscopy (TRIR). The spectral features of I parallel those for Re(bpy)(CO)3Cl, with the lowest-energy T1 state corresponding to Re dπ to PMT-H π* charge transfer, producing higher-energy CO stretching vibrations relative to the ground state. For III, the CO vibrations are shifted to lower energy, consistent with charge being located on the PMT ligand, which enhances Re-to-CO backbonding. In the MoMoδδ* T1 state, however, the backbonding is reduced to the PMT ligand, and the CO stretches are at slightly higher energy relative to the ground state.

Concerning the ground state and S1 and T1 photoexcited states of the homoleptic quadruply bonded complexes Mo2(O2CC6H4-p-X)4, where X = C≡C-H or C≡N.

The preparation of the homoleptic MM quadruply bonded complexes Mo2(O2CC6H4-p-X)4, where X = C≡C-H (I) or C≡N (II), is reported along with the solution characterization data and electronic structure calculations employing density functional theory. The compounds are colored orange (I) and red (II) due to the metal-to-ligand charge transfer involving the HOMO, Mo2δ, and LUMO, which is a ligand-based π* combination. Studies of the S1 state, (1)MLCT, by femtosecond time-resolved infrared spectroscopy indicate that the negative charge is distributed principally over two trans ligands. The T1 states are (3)MoMoδδ* as determined by NIR emission and nanosecond transient absorption.