Isolation and characterization of Candida tropicalis B: a promising yeast strain for biodegradation of petroleum oil in marine environments.

The increasing interest in environmental protection laws has compelled companies to regulate the disposal of waste organic materials. Despite efforts to explore alternative energy sources, the world remains heavily dependent on crude petroleum oil and its derivatives. The expansion of the petroleum industry has significant implications for human and environmental well-being. Bioremediation, employing living microorganisms, presents a promising approach to mitigate the harmful effects of organic hydrocarbons derived from petroleum. This study aimed to isolate and purify local yeast strains from oil-contaminated marine water samples capable of aerobically degrading crude petroleum oils and utilizing them as sole carbon and energy sources. One yeast strain (isolate B) identified as Candida tropicalis demonstrated high potential for biodegrading petroleum oil in seawater. Physiological characterization revealed the strain's ability to thrive across a wide pH range (4-11) with optimal growth at pH 4, as well as tolerate salt concentrations ranging from 1 to 12%. The presence of glucose and yeast extract in the growth medium significantly enhanced the strain's biomass formation and biodegradation capacity. Scanning electron microscopy indicated that the yeast cell diameter varied based on the medium composition, further emphasizing the importance of organic nitrogenous sources for initial growth. Furthermore, the yeast strain exhibited remarkable capabilities in degrading various aliphatic and aromatic hydrocarbons, with a notable preference for naphthalene and phenol at 500 and 1000 mg/l, naphthalene removal reached 97.4% and 98.6%, and phenol removal reached 79.48% and 52.79%, respectively. Optimization experiments using multi-factorial sequential designs highlighted the influential role of oil concentration on the bioremediation efficiency of Candida tropicalis strain B. Moreover, immobilized yeast cells on thin wood chips demonstrated enhanced crude oil degradation compared to thick wood chips, likely due to increased surface area for cell attachment. These findings contribute to our understanding of the potential of Candida tropicalis for petroleum oil bioremediation in marine environments, paving the way for sustainable approaches to address oil pollution.

Novel Approach to Photocatalytic Removal of Linezolid by Advanced Nano-Biochar/Bismuth Oxychloride Hybrid.

Herein, we introduce an innovative nanohybrid material for advanced wastewater treatment, composed of Corchorus olitorius-derived biochar and bismuth oxychloride (Biochar/Bi12O17Cl2), demonstrated in a solar photoreactor. This work focuses on the efficient degradation of linezolid (LIN), a persistent pharmaceutical pollutant, utilizing the unique (photo)catalytic capabilities of the nanohybrid. Compared with its individual components, the biochar/Bi12O17Cl2 hybrid exhibits a remarkable degradation efficiency of 82.6% for LIN, alongside significant chemical oxygen demand (COD) and total organic carbon (TOC) mineralization rates of 81.3 and 75.8%, respectively. These results were achieved within 3 h under solar irradiation, using an optimal composite dose of 125 mg/L at pH 4.3 ± 0.45, with an initial COD and LIN concentrations of 1605 and 160.8 mg/L and TOC of 594.3 mg/L. The nanohybrid's stability across five cycles of use demonstrates its potential for repeated applications, with degradation efficiencies of 82.6 and 77.9% in the first and fifth cycles, respectively. This indicates the biochar/Bi12O17Cl2 composite's suitability as a sustainable and cost-effective solution for the remediation of heavily contaminated waters. Further, the degradation pathway proposed the degradation of all of the generated intermediates to a single-ring compound. Contributing to the development of next-generation materials for environmental remediation, this research underscores the critical role of nanotechnology in enhancing water quality and ecosystem sustainability and addressing the global imperative for clean water access and environmental preservation.

Whole spectrum of Aeromonas hydrophila virulence determinants and the identification of novel SNPs using comparative pathogenomics.

Aeromonas hydrophila is a ubiquitous fish pathogen and an opportunistic human pathogen. It is mostly found in aquatic habitats, but it has also been isolated from food and bottled mineral waters. It causes hemorrhagic septicemia, ulcerative disease, and motile Aeromonas septicemia (MAS) in fish and other aquatic animals. Moreover, it might cause gastroenteritis, wound infections, and septicemia in humans. Different variables influence A. hydrophila virulence, including the virulence genes expressed, host susceptibility, and environmental stresses. The identification of virulence factors for a bacterial pathogen will help in the development of preventive and control measures. 95 Aeromonas spp. genomes were examined in the current study, and 53 strains were determined to be valid A. hydrophila. These genomes were examined for pan- and core-genomes using a comparative genomics technique. A. hydrophila has an open pan-genome with 18,306 total genes and 1620 genes in its core-genome. In the pan-genome, 312 virulence genes have been detected. The effector delivery system category had the largest number of virulence genes (87), followed by immunological modulation and motility genes (69 and 46, respectively). This provides new insight into the pathogenicity of A. hydrophila. In the pan-genome, a few distinctive single-nucleotide polymorphisms (SNPs) have been identified in four genes, namely: D-glycero-beta-D-manno-heptose-1,7-bisphosphate 7-phosphatase, chemoreceptor glutamine deamidase, Spermidine N (1)-acetyltransferase, and maleylpyruvate isomerase, which are present in all A. hydrophila genomes, which make them molecular marker candidates for precise identification of A. hydrophila. Therefore, for precise diagnostic and discrimination results, we suggest these genes be considered when designing primers and probes for sequencing, multiplex-PCR, or real-time PCR.

A novel Corchorus olitorius-derived biochar/Bi12O17Cl2 photocatalyst for decontamination of antibiotic wastewater containing tetracycline under natural visible light.

Herein, a novel composite of Corchorus olitorius-derived biochar and Bi12O17Cl2 was fabricated and utilized for the degradation of tetracycline (TC) in a solar photo-oxidation reactor. The morphology, chemical composition, and interaction between the composite components were studied using various analyses. The biochar showed a TC removal of 52.7% and COD mineralization of 59.6% using 150 mg/L of the biochar at a pH of 4.7 ± 0.5, initial TC concentration of 163 mg/L, and initial COD of 1244 mg/L. The degradation efficiency of TC increased to 63% and the mineralization ratio to 64.7% using 150 mg/L of bare Bi12O17Cl2 at a pH of 4.7 ± 0.5, initial TC concentration of 178 mg/L, and COD of 1034 mg/L. In the case of biochar/Bi12O17Cl2 composite, the degradation efficiency of TC and COD mineralization ratio improved to 85.8% and 77.7% due to the potential of biochar to accept electrons which retarded the recombination of electrons and holes. The synthesized composite exhibited high stability over four succeeding cycles. According to the generated intermediates, TC could be degraded to caprylic acid and pentanedioic acid via the frequent attack by the reactive species. The prepared composite is a promising photocatalyst and can be applied in large-scale systems due to its high degradation and mineralization performance in a short time besides its low cost and stability.

A De Novo Optimized Cell-Free System for the Expression of Soluble and Active Human Tumor Necrosis Factor-Alpha.

Cell-free (in vitro) expression is a robust alternative platform to the cell-based (in vivo) system for recombinant protein production. Tumor necrosis factor-alpha (TNF-α) is an effective pro-inflammatory cytokine with pleiotropic effects. The aim of the current study was de novo optimized expression of soluble and active human TNF-α by an in vitro method in an E. coli-based cell-free protein synthesis (CFPS) system and its biological activity evaluation. The codon-optimized synthetic human TNF-α gene was constructed by a two-step PCR, cloned into pET101/D-TOPO vector and then expressed by the E. coli CFPS system. Cell-free expression of the soluble protein was optimized using a response surface methodology (RSM). The anticancer activity of purified human TNF-α was assessed against three human cancer cell lines: Caco-2, HepG-2 and MCF-7. Data from RSM revealed that the lowest value (7.2 µg/mL) of cell-free production of recombinant human TNF-α (rhTNF-α) was obtained at a certain incubation time (6 h) and incubation temperature (20 °C), while the highest value (350 µg/mL) was recorded at 4 h and 35 °C. This rhTNF-α showed a significant anticancer potency. Our findings suggest a cell-free expression system as an alternative platform for producing soluble and functionally active recombinant TNF-α for further research and clinical trials.

Kinetic studies on the expression of alginate and extracellular proteins by Pseudomonas aeruginosa FRD1 and PAO1.

Pseudomonas aeruginosa is characterized by its capability to produce extracellular virulence proteins and to establish biofilm-based infections that do not respond easily to conventional treatments. However, the physiological conditions that decrease the fitness of such a persistent pathogen would assist the host to defend itself and reduce the infection prevalence. Therefore, developing treatments against P. aeruginosa requires a quantitative understanding of the relationship between bacterial growth kinetics and secretion of alginate and proteins, in addition to the ecological factors that control their synthesis. For this purpose, we examined various environmental factors that affect the specific product yield coefficients (expressed as g product/OD600) of alginate and extracellular proteins using a mucoid (FRD1) and a non-mucoid (PAO1) clinical isolate of P. aeruginosa, respectively. The results suggested magnesium sulfate, trace elements and hydrogen peroxide as significant variables that positively affect alginate synthesis by the FRD1 cells. However, the production of extracellular proteins by PAO1 was negatively affected by the concentration of ferrous sulfate. For understanding the kinetics of expressing alginate and extracellular proteins by the cells, a well-controlled 5 L tank bioreactor was used. The results suggested that under the bioreactor controlled conditions, both alginate and extracellular proteins are expressed parallel to biomass increase in the cells of P. aeruginosa.

Expression of extracellular polysaccharides and proteins by clinical isolates of Pseudomonas aeruginosa in response to environmental conditions.

The opportunistic pathogen Pseudomonas aeruginosa causes chronic respiratory infections in patients with cystic fibrosis (CF). Persistence of this bacterium is attributed to its ability to form biofilms which rely on an extracellular polymeric substance matrix. Extracellular polysaccharides (EPS) and secreted proteins are key matrix components of P. aeruginosa biofilms. Recently, nebulized magnesium sulfate has been reported as a significant bronchodilator for asthmatic patients including CF. However, the impact of magnesium sulfate on the virulence effect of P. aeruginosa is lacking. In this report, we investigated the influence of magnesium sulfate and other environmental factors on the synthesis of alginate and secretion of proteins by a mucoid and a non-mucoid strain of P. aeruginosa, respectively. By applying the Plackett-Burman and Box-Behnken experimental designs, we found that phosphates (6.0 g/l), ammonium sulfate (4.0 g/l), and trace elements (0.6 mg/l) markedly supported alginate production by the mucoid strain. However, ferrous sulfate (0.3 mg/l), magnesium sulfate (0.02 g/l), and phosphates (6.0 g/l) reinforced the secretion of proteins by the non-mucoid strain.

Citric acid production by a novel Aspergillus niger isolate: I. Mutagenesis and cost reduction studies.

Ultraviolet-irradiation (UV), ethyl methane sulfonate (EMS) and acridine orange (AO) were used to induce citric acid overproduction mutations in Aspergillus niger UMIP 2564. Among 15, eight of the mutant derivatives, were improved with respect to citric acid production from sucrose in batch cultures. Maximum product yield (60.25%) was recorded by W5, a stable UV mutant, with approximately 3.2-fold increase when compared to the parental wild type strain. In terms of the kinetic parameters for batch fermentation processes, the mutation doubled the specific substrate uptake rate and achieved 4.5- and 7.5-fold improvements in citric acid productivity and specific productivity, respectively. For reduction of the fermentation medium cost, corn steep liquor and calcium phosphate pre-treated beet molasses were successfully used as substituents of nitrogen and carbon sources in the growth medium, respectively. These medium substitutions resulted in a W5 citric acid fermentation culture with a product yield of 74.56%.

Citric acid production by a novel Aspergillus niger isolate: II. Optimization of process parameters through statistical experimental designs.

In this work, sequential optimization strategy, based on statistical designs, was employed to enhance the production of citric acid in submerged culture. For screening of fermentation medium composition significantly influencing citric acid production, the two-level Plackett-Burman design was used. Under our experimental conditions, beet molasses and corn steep liquor were found to be the major factors of the acid production. A near optimum medium formulation was obtained using this method with increased citric acid yield by five-folds. Response surface methodology (RSM) was adopted to acquire the best process conditions. In this respect, the three-level Box-Behnken design was applied. A polynomial model was created to correlate the relationship between the three variables (beet molasses, corn steep liquor and inoculum concentration) and citric acid yield. Estimated optimum composition for the production of citric acid is as follows pretreated beet molasses, 240.1g/l; corn steep liquor, 10.5g/l; and spores concentration, 10(8)spores/ml. The optimum citric acid yield was 87.81% which is 14 times than the basal medium. The five level central composite design was used for outlining the optimum values of the fermentation factors initial pH, aeration rate and temperature on citric acid production. Estimated optimum values for the production of citric acid are as follows initial pH 4.0; aeration rate, 6500ml/min and fermentation temperature, 31.5 degrees C.

Genome Sequence of Bacillus thuringiensis Strain Btm27, an Egyptian Isolate Highly Toxic to Cotton Leafworm.

Bacillus thuringiensis is a potent microbial control agent against insect pests. Here, we present the draft genome of the Egyptian strain Btm27 that shows high toxicity toward the cotton leafworm. The genome contains three insecticidal genes cry1Ac9, cry2Ab1, and vip3V that have been implicated in conferring toxicity toward lepidoptera.

Synthesis and biological evaluation of new nanosized aromatic polyamides containing amido- and sulfonamidopyrimidines pendant structures.

BACKGROUND: Antibiotics are biocides or products that inhibit the growth of microorganisms in the living cells and there are extensive works directed to develop efficient antimicrobial agents. The sulfonamide-containing polymers have great potential to resist gram-positive or gram-negative bacterial and fungal attacks. As a therapeutic agent, the sulfonamides have been reported as antitumor and antimicrobial agents against bacteria, being more potent against gram positive rather than gram negative strains. Design of new classes of inhibitors bearing fluorescent tails, as therapeutic and imaging agents, is currently an active area of research. Here, we describe the synthesis of a new family of polyamides based on chlorophenyl-3,5-diaminobenzamides, methyl substituted pyrimidinoamido-3,5-diamino- benzamides and methyl substituted pyrimidinosulfonamido-3,5-diaminobenzamides and evaluation of their thermal, optical and antimicrobial properties. RESULTS: We report the synthesis of a new series of nanosized polyamides containing bioactive pendent structures. The spherical nanosized polymer particles are soluble in many organic solvents and exhibited emissions ranging from blue to orange wavelength depending on the nature of the signaling unit. Pyrimidine- and p-chloroaromatic containing polymers exhibited higher bioactivity than that contain the sulfonamide group. The amidopyrimidine polymers exhibited remarkable antifungal and antibacterial activity and thus, these types of polymers are promising candidates for biomedical applications. CONCLUSIONS: The SEM analysis indicated that most of the polyamides were organized as well defined nano sized spheres, but in certain derivatives small amount of aggregated nanospheres were also observed. Thermal analyses were studied up to 700 °C and results showed comparable thermal behavior. The optical results revealed that polymeric series (A) exhibited orange emission, series (B) showed green emission while series (C) exhibited yellow and blue emissions. Benzene/pyridine structure interchange resulted in red shifted peaks attributed to the localized lone pair of electrons on a nitrogen atom which offer a greater electron affinity and better electron-transporting properties. The amido- and sulfonamide pyrimidine containing polymers exhibited the most potent antimicrobial activity. Relative to the reference Gentamicin, the polymer 54 exhibited comparable antibacterial activity against gram negative bacteria. Analogues 52 and 57 exhibited remarkable antibacterial activities compared to the references used. Thus, these polyamides are likely to be promising broad spectrum antibacterial agents and deserve further investigation at the molecular level.Graphical abstract:The synthesis and characterization of a new series of nanosized polyamides containing chloroaromatic (A), pyrimidinoamido- (B) and pyrimidosulfonamido- (C) pendent structures as promising candidates for biomedical applications is described.

Microbial control of the cotton leafworm Spodoptera littoralis (Boisd.) by Egyptian Bacillus thuringiensis isolates.

Four local Bacillus thuringiensis (Bt) isolates that had been serologically identified as Bt var. kurstaki (Btk2, Btk3, and Btk66) and Bt var. mexicanensis (Btm27), in addition to two reference strains (4D20 and 4AC1), were laboratory assayed as microbial control agents against the Egyptian cotton leafworm Spodoptera littoralis (Boisd.). Polymerase chain reaction (PCR) amplification analysis revealed that each of the six experimental strains carries, at least, a cry1 type gene which expresses a protein toxin active against lepidopterous insects. Additionally, PCR amplification results demonstrated that 4D20 and Btk66 contain the Lepidoptera- and Diptera-active cry2 type gene and that Btk66 contains Coleoptera-active cry7 and cry8 genes. Among the six strains, Btk66 and Btm27 were the most promising microbial control agents against S. littoralis. The present findings were the first to report that Btm27 (classified as B. thuringiensis var. mexicanensis) is a very potent microbial control agent against S. littoralis-tested larvae. For more characterization of these two isolates, the sspO gene was investigated as a molecular chronometer. The DNA sequencing results proved that Btk66 and Btm27 carry sspO open reading frames with identical nucleotide sequences, suggesting a strong phylogenetic relationship between the two strains.