RESUMEN
Well-established therapies for bone defects are restricted to bone grafts which face significant disadvantages (limited availability, donor site morbidity, insufficient integration). Therefore, the objective was to develop an alternative approach investigating the regenerative potential of medical grade polycaprolactone-tricalcium phosphate (mPCL-TCP) and silk-hydroxyapatite (silk-HA) scaffolds.Critical sized ovine tibial defects were created and stabilized. Defects were left untreated, reconstructed with autologous bone grafts (ABG) and mPCL-TCP or silk-HA scaffolds. Animals were observed for 12 weeks. X-ray analysis, torsion testing and quantitative computed tomography (CT) analyses were performed. Radiological analysis confirmed the critical nature of the defects. Full defect bridging occurred in the autograft and partial bridging in the mPCL-TCP group. Only little bone formation was observed with silk-HA scaffolds. Biomechanical testing revealed a higher torsional moment/stiffness (p < 0.05) and CT analysis a significantly higher amount of bone formation for the ABG group when compared to the silk-HA group. No significant difference was determined between the ABG and mPCL-TCP groups. The results of this study suggest that mPCL-TCP scaffolds combined can serve as an alternative to autologous bone grafting in long bone defect regeneration. The combination of mPCL-TCP with osteogenic cells or growth factors represents an attractive means to further enhance bone formation.
Asunto(s)
Sustitutos de Huesos/uso terapéutico , Regeneración Tisular Dirigida/instrumentación , Osteogénesis/fisiología , Fracturas de la Tibia/cirugía , Andamios del Tejido , Animales , Análisis de Falla de Equipo , Diseño de Prótesis , Ovinos , Resultado del TratamientoRESUMEN
Mechanical boundary conditions are well known to influence the regeneration of bone and mechanobiology is the study of how mechanical or physical stimuli regulate biological processes. In vivo models have been applied over many years to investigate the effects of mechanics on bone healing. Early models have focused on the influence of mechanical stability on healing outcome, with an interest in parameters such as the magnitude of interfragmentary movement, the rate and timing of application of micromotion and the number of loading cycles. As measurement techniques have been refined, there has been a shift in orders of magnitude from investigations targeted at the organ level to those targeted at the tissue level and beyond. An understanding of how mechanics influences tissue differentiation during repair and regeneration crucially requires spatial and temporal knowledge of both the local mechanical environment in the healing tissue and a characterization of the tissues formed over the course of regeneration. Owing to limitations in the techniques available to measure the local mechanical conditions during repair directly, simulation approaches, such as the finite element method, are an integral part of the mechanobiologist's toolkit, while histology remains the gold standard in the characterization of the tissue formed. However, with rapid advances occurring in imaging modalities and methods to characterize tissue properties, new opportunities exist to better understand the role of mechanics in the biology of bone regeneration. Combined with developments in molecular biology, mechanobiology has the potential to offer exciting, new regenerative treatments for bone healing.
Asunto(s)
Matriz Ósea/fisiología , Regeneración Ósea/fisiología , Mecanotransducción Celular/fisiología , Osteoblastos/fisiología , Osteogénesis/fisiología , Reología/métodos , Ingeniería de Tejidos/métodos , Proliferación Celular , Supervivencia Celular , Modelos Biológicos , Estimulación Física/métodosRESUMEN
Healthy bone healing is a remarkable, mechanically sensitive, scar-free process that leads rapidly to repair tissue of high mechanical quality and functionality, and knowledge of this process is essential for driving advances in bone tissue engineering and regeneration. Gaining this knowledge requires the use of models to probe and understand the detailed mechanisms of healing, and the tight coupling of biology and mechanics make it essential that both of these aspects are controlled and analysed together, using a mechanobiological approach. This article reviews the literature on in vitro models used for this purpose, beginning with two-dimensional (2D) cell culture models used for applying controlled mechanical stimuli to relevant cells, and detailing the analysis techniques required for understanding both substrate strain and fluid flow stimuli in sufficient detail to relate them to biological response. The additional complexity of three-dimensional (3D) models, enabling more faithful representation of the healing situation, can require correspondingly more sophisticated tools for mechanical and biological analysis, but has recently uncovered exciting evidence for the mechanical sensitivity of angiogenesis, essential for successful healing. Studies using explanted tissue continue to be vital in informing these approaches, providing additional evidence for the relevance of effects in biological and mechanical environments close to those in the living organism. Mechanobiology is essential for the proper analysis of models for bone regeneration, and has an exciting integrative role to play not only in advancing knowledge in this area, but also in ensuring successful translation of new tissue engineering and regenerative therapies to the clinic.
Asunto(s)
Matriz Ósea/fisiología , Regeneración Ósea/fisiología , Mecanotransducción Celular/fisiología , Osteoblastos/fisiología , Osteogénesis/fisiología , Reología/métodos , Ingeniería de Tejidos/métodos , Proliferación Celular , Supervivencia Celular , Modelos Biológicos , Osteoblastos/citología , Estimulación Física/métodosRESUMEN
Fracture healing is influenced by fixation stability and experimental evidence suggests that the initial mechanical conditions may determine the healing outcome. We hypothesised that mechanical conditions influence not only the healing outcome, but also the early phase of fracture healing. Additionally, it was hypothesised that decreased fixation stability characterised by an increased shear interfragmentary movement results in a delay in healing. Sixty-four sheep underwent a mid-shaft tibial osteotomy which was treated with either a rigid or a semi-rigid external fixator. Animals were sacrificed at 2, 3, 6 and 9 weeks postoperatively and the fracture callus was analysed using radiological, biomechanical and histological techniques. The tibia treated with semi-rigid fixation showed inferior callus stiffness and quality after 6 weeks. At 9 weeks, the calluses were no longer distinguishable in their mechanical competence. The calluses at 9 weeks produced under rigid fixation were smaller and consisted of a reduced fibrous tissue component. These results demonstrate that the callus formation over the course of healing differed both morphologically and in the rate of development. In this study, we provide evidence that the course of healing is influenced by the initial fixation stability. The semi-rigid fixator did not result in delayed healing, but a less optimal healing path was taken. An upper limit of stability required for successful healing remains unknown, however a limit by which healing is less optimal has been determined.
Asunto(s)
Fijación Interna de Fracturas , Curación de Fractura , Animales , Fenómenos Biomecánicos , Callo Óseo/patología , Fijadores Externos , Femenino , Osteotomía , Radiografía , Ovinos , Tibia/diagnóstico por imagen , Tibia/patología , Tibia/fisiopatología , Fracturas de la Tibia/fisiopatología , Fracturas de la Tibia/cirugía , Factores de Tiempo , Anomalía TorsionalRESUMEN
The mechanical conditions in the repair tissues are known to influence the outcome of fracture healing. These mechanical conditions are determined by the stiffness of fixation and limb loading. Experimental studies have shown that there is a range of beneficial fixation stiffness for timely healing and that fixation stiffness that is either too flexible or too stiff impairs callus healing. However, much less is known about how mechanical conditions influence the biological processes that make up the sequence of bone repair and if indeed mechanical stimulation is required at all stages of repair. Secondary bone healing occurs through a sequence of events broadly characterised by inflammation, proliferation, consolidation and remodelling. It is our hypothesis that a change in fixation stiffness from very flexible to stiff can shorten the time to healing relative to constant fixation stiffness. Flexible fixation has the benefit of promoting greater callus formation and needs to be applied during the proliferative stage of repair. The greater callus size helps to stabilize the fragments earlier allowing mineralization to occur faster. Together with stable/rigid fixation applied during the latter stage of repair to ensure mineralization of the callus. The predicted benefits of inverse dynamization are shortened healing in comparison to very flexible fixation and healing time comparable or faster than stable fixation with greater callus stiffness.
Asunto(s)
Curación de Fractura , HumanosRESUMEN
Mesenchymal progenitor cells (MPCs) represent an attractive cell population for bone tissue engineering. Their special immunological characteristics suggest that MPCs may be used in allogenic applications. The objective of this study was to compare the regenerative potential of autologous vs. allogenic MPCs in an ovine critical size segmental defect model. Ovine MPCs were isolated from bone marrow aspirates, expanded and cultured with osteogenic medium for 2weeks before implantation. Autologous and allogenic transplantation was performed using the cell-seeded scaffolds and unloaded scaffolds, while the application of autologous bone grafts served as a control group (n=6). Bone healing was assessed 12weeks after surgery by radiology, microcomputed tomography, biomechanical testing and histology. Radiology, biomechanical testing and histology revealed no significant differences in bone formation between the autologous and allogenic groups. Both cell groups showed more bone formation than the scaffold alone, whereas the biomechanical data showed no significant differences between the cell groups and the unloaded scaffolds. The results of the study suggest that scaffold-based bone tissue engineering using allogenic cells offers the potential for an off-the-shelf product. Thus the results of this study serve as an important baseline for translation of the assessed concepts into clinical applications.
Asunto(s)
Modelos Animales de Enfermedad , Trasplante de Células Madre Mesenquimatosas/métodos , Procedimientos de Cirugía Plástica/métodos , Fracturas de la Tibia/patología , Fracturas de la Tibia/cirugía , Andamios del Tejido , Animales , Células Cultivadas , Diseño de Equipo , Análisis de Falla de Equipo , Humanos , Ovinos , Trasplante Autólogo/métodos , Trasplante Homólogo , Resultado del TratamientoRESUMEN
Bone loss may result from remodelling initiated by implant stress protection. Quantifying remodelling requires bone density distributions which can be obtained from computed tomography scans. Pre-operative scans of large animals however are rarely possible. This study aimed to determine if the contra-lateral bone is a suitable control for the purpose of quantifying bone remodelling. CT scans of 8 pairs of ovine tibia were used to determine the likeness of left and right bones. The deviation between the outer surfaces of the bone pairs was used to quantify geometric similarity. The density differences were determined by dividing the bones into discrete volumes along the shaft of the tibia. Density differences were also determined for fractured and contra-lateral bone pairs to determine the magnitude of implant related remodelling. Left and right ovine tibiae were found to have a high degree of similarity with differences of less than 1.0mm in the outer surface deviation and density difference of less than 5% in over 90% of the shaft region. The density differences (10-40%) as a result of implant related bone remodelling were greater than left-right differences. Therefore, for the purpose of quantifying bone remodelling in sheep, the contra-lateral tibia may be considered an alternative to a pre-operative control.
Asunto(s)
Remodelación Ósea , Tibia/diagnóstico por imagen , Tibia/fisiología , Tomografía Computarizada por Rayos X/normas , Animales , Densidad Ósea , Estándares de Referencia , Ovinos , Tibia/cirugíaRESUMEN
During secondary fracture healing, various tissue types including new bone are formed. The local mechanical strains play an important role in tissue proliferation and differentiation. To further our mechanobiological understanding of fracture healing, a precise assessment of local strains is mandatory. Until now, static analyses using Finite Elements (FE) have assumed homogenous material properties. With the recent quantification of both the spatial tissue patterns (Vetter et al., 2010) and the development of elastic modulus of newly formed bone during healing (Manjubala et al., 2009), it is now possible to incorporate this heterogeneity. Therefore, the aim of this study is to investigate the effect of this heterogeneity on the strain patterns at six successive healing stages. The input data of the present work stemmed from a comprehensive cross-sectional study of sheep with a tibial osteotomy (Epari et al., 2006). In our FE model, each element containing bone was described by a bulk elastic modulus, which depended on both the local area fraction and the local elastic modulus of the bone material. The obtained strains were compared with the results of hypothetical FE models assuming homogeneous material properties. The differences in the spatial distributions of the strains between the heterogeneous and homogeneous FE models were interpreted using a current mechanobiological theory (Isakson et al., 2006). This interpretation showed that considering the heterogeneity of the hard callus is most important at the intermediate stages of healing, when cartilage transforms to bone via endochondral ossification.
Asunto(s)
Callo Óseo/fisiología , Curación de Fractura/fisiología , Animales , Módulo de Elasticidad/fisiología , Femenino , Análisis de Elementos Finitos , Fracturas Óseas/patología , Oveja Doméstica , Estrés MecánicoRESUMEN
The collaboration of clinicians with basic science researchers is crucial for addressing clinically relevant research questions. In order to initiate such mutually beneficial relationships, we propose a model where early career clinicians spend a designated time embedded in established basic science research groups, in order to pursue a postgraduate qualification. During this time, clinicians become integral members of the research team, fostering long term relationships and opening up opportunities for continuing collaboration. However, for these collaborations to be successful there are pitfalls to be avoided. Limited time and funding can lead to attempts to answer clinical challenges with highly complex research projects characterised by a large number of "clinical" factors being introduced in the hope that the research outcomes will be more clinically relevant. As a result, the complexity of such studies and variability of its outcomes may lead to difficulties in drawing scientifically justified and clinically useful conclusions. Consequently, we stress that it is the basic science researcher and the clinician's obligation to be mindful of the limitations and challenges of such multi-factorial research projects. A systematic step-by-step approach to address clinical research questions with limited, but highly targeted and well defined research projects provides the solid foundation which may lead to the development of a longer term research program for addressing more challenging clinical problems. Ultimately, we believe that it is such models, encouraging the vital collaboration between clinicians and researchers for the work on targeted, well defined research projects, which will result in answers to the important clinical challenges of today.
Asunto(s)
Investigación Biomédica/normas , Proyectos de Investigación/normas , Investigadores/normas , Heridas y Lesiones , Australia , Investigación Biomédica/educación , Conducta Cooperativa , Humanos , Investigadores/educaciónRESUMEN
After bone fracture, various cellular activities lead to the formation of different tissue types, which form the basis for the process of secondary bone healing. Although these tissues have been quantified by histology, their material properties are not well understood. Thus, the aim of this study is to correlate the spatial and temporal variations in the mineral content and the nanoindentation modulus of the callus formed via intramembranous ossification over the course of bone healing. Midshaft tibial samples from a sheep osteotomy model at time points of 2, 3, 6 and 9 weeks were employed. PMMA embedded blocks were used for quantitative back scattered electron imaging and nanoindentation of the newly formed periosteal callus near the cortex. The resulting indentation modulus maps show the heterogeneity in the modulus in the selected regions of the callus. The indentation modulus of the embedded callus is about 6 GPa at the early stage. At later stages of mineralization, the average indentation modulus reaches 14 GPa. There is a slight decrease in average indentation modulus in regions distant to the cortex, probably due to remodelling of the peripheral callus. The spatial and temporal distribution of mineral content in the callus tissue also illustrates the ongoing remodelling process observed from histological analysis. Most interestingly the average indentation modulus, even at 9 weeks, remains as low as 13 GPa, which is roughly 60% of that for cortical sheep bone. The decreased indentation modulus in the callus compared to cortex is due to the lower average mineral content and may be perhaps also due to the properties of the organic matrix which might be different from normal bone.
Asunto(s)
Densidad Ósea/fisiología , Callo Óseo/patología , Callo Óseo/fisiopatología , Cicatrización de Heridas , Animales , Fenómenos Biomecánicos , Módulo de Elasticidad , Imagenología Tridimensional , Ovinos , Factores de TiempoRESUMEN
To analyse mechanotransduction resulting from tensile loading under defined conditions, various devices for in vitro cell stimulation have been developed. This work aimed to determine the strain distribution on the membrane of a commercially available device and its consistency with rising cycle numbers, as well as the amount of strain transferred to adherent cells. The strains and their behaviour within the stimulation device were determined using digital image correlation (DIC). The strain transferred to cells was measured on eGFP-transfected bone marrow-derived cells imaged with a fluorescence microscope. The analysis was performed by determining the coordinates of prominent positions on the cells, calculating vectors between the coordinates and their length changes with increasing applied tensile strain. The stimulation device was found to apply homogeneous (mean of standard deviations approx. 2% of mean strain) and reproducible strains in the central well area. However, on average, only half of the applied strain was transferred to the bone marrow-derived cells. Furthermore, the strain measured within the device increased significantly with an increasing number of cycles while the membrane's Young's modulus decreased, indicating permanent changes in the material during extended use. Thus, strain magnitudes do not match the system readout and results require careful interpretation, especially at high cycle numbers.