Enhanced Electrocatalytic Detection of Choline Based on CNTs and Metal Oxide Nanomaterials.

Choline is an officially established essential nutrient and precursor of the neurotransmitter acetylcholine. It is employed as a cholinergic activity marker in the early diagnosis of brain disorders such as Alzheimer's and Parkinson's disease. Low levels of choline in diets and biological fluids, such as blood plasma, urine, cerebrospinal and amniotic fluid, could be an indication of neurological disorder, fatty liver disease, neural tube defects and hemorrhagic kidney necrosis. Meanwhile, it is known that choline metabolism involves oxidation, which frees its methyl groups for entrance into single-C metabolism occurring in three phases: choline oxidase, betaine synthesis and transfer of methyl groups to homocysteine. Electrocatalytic detection of choline is of physiological and pathological significance because choline is involved in the physiological processes in the mammalian central and peripheral nervous systems and thus requires a more reliable assay for its determination in biological, food and pharmaceutical samples. Despite the use of several methods for choline determination, the superior sensitivity, high selectivity and fast analysis response time of bioanalytical-based sensors invariably have a comparative advantage over conventional analytical techniques. This review focuses on the electrocatalytic activity of nanomaterials, specifically carbon nanotubes (CNTs), CNT nanocomposites and metal/metal oxide-modified electrodes, towards choline detection using electrochemical sensors (enzyme and non-enzyme based), and various electrochemical techniques. From the survey, the electrochemical performance of the choline sensors investigated, in terms of sensitivity, selectivity and stability, is ascribed to the presence of these nanomaterials.

Spectroscopic and Antibacterial Properties of CuONPs from Orange, Lemon and Tangerine Peel Extracts: Potential for Combating Bacterial Resistance.

Green synthesis of nanoparticles using citrus peel extracts is known to be environmentally friendly and non-toxic when compared to chemical methods. In this study, different citrus peel extracts obtained with the solvents acetone and distilled water were used to synthesize copper oxide nanoparticles (CuONPs). The nanoparticles were characterized using cyclic voltammetry, ultraviolet-visible spectroscopy, energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). The absorption spectrum of CuONPs prepared with acetone exhibited characteristic peaks at the wavelengths between 280-293 nm, while those with distilled water had peaks at 290 nm. The acetone-synthesized CuONPs were spherical while those produced using distilled water were rod-shaped. Based on EDS, the analysis revealed a trace spectrum of CuO nanoparticles with different weight compositions that varied with the type of citrus peel and solvent used. FTIR measurements were carried out in the range of 500-4000 cm-1 for citrus peel extract mediated CuONPs. The spectra had five vibrations occurring at approximately 473, 477, 482, 607 and 616 cm-1 for all samples, which can be attributed to the vibrations of CuO, validating the formation of highly pure CuONPs.

Electrochemical Detection of Dopamine at Fe3O4/SPEEK Modified Electrode.

Reported here is the design of an electrochemical sensor for dopamine (DA) based on a screen print carbon electrode modified with a sulphonated polyether ether ketone-iron (III) oxide composite (SPCE-Fe3O4/SPEEK). L. serica leaf extract was used in the synthesis of iron (III) oxide nanoparticles (Fe3O4NPs). Successful synthesis of Fe3O4NP was confirmed through characterization using Fourier transform infrared (FTIR), ultraviolet-visible light (UV-VIS), X-ray diffractometer (XRD), and scanning electron microscopy (SEM). Cyclic voltammetry (CV) was used to investigate the electrochemical behaviour of Fe3O4/SPEEK in 0.1 M of phosphate buffer solution (PBS) containing 5 mM of potassium ferricyanide (III) solution (K3[Fe(CN)6]). An increase in peak current was observed at the nanocomposite modified electrode SPCE-Fe3O4/SPEEK) but not SPCE and SPCE-Fe3O4, which could be ascribed to the presence of SPEEK. CV and square wave voltammetry (SWV) were employed in the electroxidation of dopamine (0.1 mM DA). The detection limit (LoD) of 7.1 µM and 0.005 µA/µM sensitivity was obtained for DA at the SPCE-Fe3O4/SPEEK electrode with concentrations ranging from 5-50 µM. LOD competes well with other electrodes reported in the literature. The developed sensor demonstrated good practical applicability for DA in a DA injection with good resultant recovery percentages and RSDs values.

Silver Nanoparticles Mediated by Costus afer Leaf Extract: Synthesis, Antibacterial, Antioxidant and Electrochemical Properties.

Synthesis of metallic and semiconductor nanoparticles through physical and chemical routes has been extensively reported. However, green synthesized metal nanoparticles are currently in the limelight due to the simplicity, cost-effectiveness and eco-friendliness of their synthesis. This study explored the use of aqueous leaf extract of Costus afer in the synthesis of silver nanoparticles (CA-AgNPs). The optical and structural properties of the resulting silver nanoparticles were studied using UV-visible spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infra-red spectrophotometer (FTIR). TEM images of the silver nanoparticles confirmed the existence of monodispersed spherical nanoparticles with a mean size of 20 nm. The FTIR spectra affirmed the presence of phytochemicals from the Costus afer leaf extract on the surface of the silver nanoparticles. The electrochemical characterization of a CA-AgNPs/multiwalled carbon nanotubes (MWCNT)-modified electrode was carried out to confirm the charge transfer properties of the nanocomposites. The comparative study showed that the CA-AgNPs/MWCNT-modified electrode demonstrated faster charge transport behaviour. The anodic current density of the electrodes in Fe(CN)6]4-/[Fe(CN)6]3- redox probe follows the order: GCE/CA-Ag/MWCNT (550 mA/cm²) > GCE/MWCNT (270 mA/cm²) > GCE (80 mA/cm²) > GCE/CA-Ag (7.93 mA/cm²). The silver nanoparticles were evaluated for their antibacterial properties against Gram negative (Escherichia coli, Klebsiella pneumonia, Pseudomonas aeruginosa) and Gram positive (Bacillus subtilis and Staphylococcus aureus) pathogens. The nanoparticles exhibited better inhibition of the bacterial strains compared to the precursors (leaf extract of Costus afer and silver nitrate). Furthermore, the ability of the nanoparticles to scavenge DPPH radicals at different concentrations was studied using the DPPH radical scavenging assay and compared to that of the leaf extract and ascorbic acid. The nanoparticles were better DPPH scavengers compared to the leaf extract and their antioxidant properties compared favorably the antioxidant results of ascorbic acid. The green approach to nanoparticles synthesis carried out in this research work is simple, non-polluting, inexpensive and non-hazardous.

Some Phthalocyanine and Naphthalocyanine Derivatives as Corrosion Inhibitors for Aluminium in Acidic Medium: Experimental, Quantum Chemical Calculations, QSAR Studies and Synergistic Effect of Iodide Ions.

The effects of seven macrocyclic compounds comprising four phthalocyanines (Pcs) namely 1,4,8,11,15,18,22,25-octabutoxy-29H,31H-phthalocyanine (Pc1), 2,3,9,10,16,17,23,24-octakis(octyloxy)-29H,31H-phthalocyanine (Pc2), 2,9,16,23-tetra-tert-butyl-29H,31H-phthalocyanine (Pc3) and 29H,31H-phthalocyanine (Pc4), and three naphthalocyanines namely 5,9,14,18,23,27,32,36-octabutoxy-2,3-naphthalocyanine (nPc1), 2,11,20,29-tetra-tert-butyl-2,3-naphthalocyanine (nPc2) and 2,3-naphthalocyanine (nP3) were investigated on the corrosion of aluminium (Al) in 1 M HCl using a gravimetric method, potentiodynamic polarization technique, quantum chemical calculations and quantitative structure activity relationship (QSAR). Synergistic effects of KI on the corrosion inhibition properties of the compounds were also investigated. All the studied compounds showed appreciable inhibition efficiencies, which decrease with increasing temperature from 30 °C to 70 °C. At each concentration of the inhibitor, addition of 0.1% KI increased the inhibition efficiency compared to the absence of KI indicating the occurrence of synergistic interactions between the studied molecules and I(-) ions. From the potentiodynamic polarization studies, the studied Pcs and nPcs are mixed type corrosion inhibitors both without and with addition of KI. The adsorption of the studied molecules on Al surface obeys the Langmuir adsorption isotherm, while the thermodynamic and kinetic parameters revealed that the adsorption of the studied compounds on Al surface is spontaneous and involves competitive physisorption and chemisorption mechanisms. The experimental results revealed the aggregated interactions between the inhibitor molecules and the results further indicated that the peripheral groups on the compounds affect these interactions. The calculated quantum chemical parameters and the QSAR results revealed the possibility of strong interactions between the studied inhibitors and metal surface. QSAR analysis on the quantum chemical parameters obtained with B3LYP/6-31G (d,p) method show that a combination of two quantum chemical parameters to form a composite index provides the best correlation with the experimental data.

Porphyrins as Corrosion Inhibitors for N80 Steel in 3.5% NaCl Solution: Electrochemical, Quantum Chemical, QSAR and Monte Carlo Simulations Studies.

The inhibition of the corrosion of N80 steel in 3.5 wt. % NaCl solution saturated with CO2 by four porphyrins, namely 5,10,15,20-tetrakis(4-hydroxyphenyl)-21H,23H-porphyrin (HPTB), 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphyrin (T4PP), 4,4',4″,4‴-(porphyrin-5,10,15,20-tetrayl)tetrakis(benzoic acid) (THP) and 5,10,15,20-tetraphenyl-21H,23H-porphyrin (TPP) was studied using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, scanning electrochemical microscopy (SECM) and scanning electron microscopy (SEM) techniques. The results showed that the inhibition efficiency, η% increases with increasing concentration of the inhibitors. The EIS results revealed that the N80 steel surface with adsorbed porphyrins exhibited non-ideal capacitive behaviour with reduced charge transfer activity. Potentiodynamic polarization measurements indicated that the studied porphyrins acted as mixed type inhibitors. The SECM results confirmed the adsorption of the porphyrins on N80 steel thereby forming a relatively insulated surface. The SEM also confirmed the formation of protective films of the porphyrins on N80 steel surface thereby protecting the surface from direct acid attack. Quantum chemical calculations, quantitative structure activity relationship (QSAR) were also carried out on the studied porphyrins and the results showed that the corrosion inhibition performances of the porphyrins could be related to their EHOMO, ELUMO, ω, and µ values. Monte Carlo simulation studies showed that THP has the highest adsorption energy, while T4PP has the least adsorption energy in agreement with the values of σ from quantum chemical calculations.

Recent Advances in the Use of CoPc-MWCNTs Nanocomposites as Electrochemical Sensing Materials.

Cobalt phthalocyanine multiwalled carbon nanotubes (CoPc-MWCNTs), a nanocomposite, are extraordinary electrochemical sensing materials. This material has attracted growing interest owing to its unique physicochemical properties. Notably, the metal at the center of the metal phthalocyanine structure offers an enhanced redox-active behavior used to design solid electrodes for determining varieties of analytes. This review extensively discusses current developments in CoPc-MWCNTs nanocomposites as potential materials for electrochemical sensors, along with their different fabrication methods, modifying electrodes, and the detected analytes. The advantages of CoPc-MWCNTs nanocomposite as sensing material and its future perspectives are carefully reviewed and discussed.

Effects of Electrolytes on the Electrochemical Impedance Properties of NiPcMWCNTs-Modified Glassy Carbon Electrode.

The supercapacitive properties of synthesized nickel phthalocyanine multiwalled carbon nanotubes nanocomposite on a glassy carbon electrode (NiPcMWCNTs-GCE) in four different electrolytes were investigated. The successful synthesis of the NiPcMWCNTs nanocomposite was confirmed by UV/vis electrode spectroscopy, SEM, TEM, EDX, and XRD techniques. The supercapacitive behaviors of the modified electrodes were examined in PBS, H2SO4, Na2SO4, and SAB electrolytes via CV and EIS techniques. The highest specific capacitance of 6.80 F g-1 was achieved for the GCE-NiPcMWCNTs electrode in 5 mM [Fe(CN)6]4-/3- prepared in 0.1 M PBS (pH 7). Charge transfer resistance Rct values of 0.06, 0.36, 0.61, and 1.98 kΩ were obtained for the GCE-NiPcMWCNTs in H2SO4, SAB, Na2SO4, and PBS electrolytes, respectively. Power density values, otherwise known as the "knee" frequency f°, of 21.2, 6.87, 2.22, and 1.68 Hz were also obtained for GCE-NiPcMWCNTs in H2SO4, Na2SO4, PBS, and SAB electrolytes, respectively. GCE-NiPcMWCNTs demonstrated the fastest electron transport capability and the highest power density in H2SO4 compared to the other electrolytes. Hence, GCE-NiPcMWCNTs-modified electrodes had high stability, high energy and power densities, and a large specific capacitance.

Electrochemical sensor for the detection of adrenaline at poly(crystal violet) modified electrode: optimization and voltammetric studies.

Herein, we report the electropolymerization of crystal violet (CRV) on a bare glassy carbon electrode (GCE) for the detection of adrenaline (AD). Electropolymerization parameters such as electrolyte pH, scan rate and monomer concentrations were optimized using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The characterization of CRV and poly(crystal violet) (PCV) was done using FT-IR, UV-visible spectroscopy and EIS. More importantly, the charge transfer resistance (Rct) and other EIS data recorded from the EIS of various forms of the poly(crystal violet) (PCV) modified glassy carbon electrode (GCE) in AD were used for identifying the best PCV modified electrode. Subsequent application of the electrode prepared at optimum conditions (PGCE) for AD detection using the square wave voltammetry (SWV) gave a limit of detection (LOD) of 2.86 µM over a linear range of 10.3-102.7 µM. This sensor also showed considerable stability, good AD recovery from the real sample (98.9%), and excellent reproducibility, making it a suitable analytical tool for AD detection at the micromolar level.

Electrochemical detection of selected heavy metals in water: a case study of African experiences.

The safety of water resources throughout the globe has been compromised by various human activities and climate change over the last decades. Consequently, the world is currently confronted with a severe shortage of water supply and a water safety crisis, amidst a growing population. With poor environmental regulations, indiscriminate budding of urban slums, poverty, and a lack of basic knowledge of hygiene and sanitation, the African water supply has been critically threatened by different organic and inorganic contaminants, which results in several health issues. Inorganic pollutants such as heavy metals are particularly of interest because they are mostly stable and non-biodegradable. Therefore, they are not easily removed from water. In different parts of the continent, the concentration of heavy metals in drinking water far exceeds the permissible level recommended by the World Health Organization (WHO). Worse still, this problem is expected to increase with growing population, industrialization, urbanization, and, of course, corruption of government and local officials. Most of the African population is ignorant of the standards of safe water. In addition, the populace lack access to affordable and reliable technologies and tools that could be used in the quantification of these pollutants. This problem is not only applicable to domestic, but also to commercial, communal, and industrial water sources. Hence, a global campaign has been launched to ensure constant assessment of the presence of these metals in the environment and to promote awareness of dangers associated with unsafe exposure to them. Various conventional spectroscopic heavy metal detection techniques have been used with great success across the world. However, such techniques suffer from some obvious setbacks, such as the cost of procurement and professionalism required to operate them, which have limited their applications. This paper, therefore, reviews the condition of African water sources, health implications of exposure to heavy metals, and the approaches explored by various indigenous electrochemists, to provide a fast, affordable, sensitive, selective, and stable electrochemical sensors for the quantification of the most significant heavy metals in our water bodies.

Spectroscopy and Cyclic Voltammetry Properties of SPEEK/CuO Nanocomposite at Screen-Printed Gold Electrodes.

A successful electrochemical study of copper oxide nanoparticles (CuO NPs), sulfonated poly (ether ether ketone) polymer (SPEEK), and sulfonated polyether ether ketone-copper oxide (SPEEK/CuO) nanocomposite on bare gold electrodes was conducted. The synthesized CuO NPs and SPEEK/CuO nanocomposite were characterized using X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and electron dispersive spectroscopy (EDS). The XRD showed that the diameter of the CuO NPs synthesized was 20.44 nm. The cyclic voltammetry properties of bare screen-print gold, SPEEK and SPEEK/CuO-modified electrodes were assessed in a 5 mM K3[Fe(CN)6] solution. The electrochemical performance of the fabricated electrodes investigated revealed that CuO NPs improved the electrochemical properties of SPEEK, and the quantum size effect indicated good adsorption by the SPEEK/CuO nanocomposite compared to the SPEEK polymer and the CuO NPs alone. Moreover, the Tafel values indicated the enhanced electrochemical performance of the other electrodes as compared with the SPEEK/CuO nanocomposite. This, therefore, confirmed the successful incorporation of CuO NPs into the SPEEK polymer, as the increased surface area and the interactions between the polymer matrix and CuO fillers improved the electrochemical performance of the electrode.

Predicting protection capacities of pyrimidine-based corrosion inhibitors for mild steel/HCl interface using linear and nonlinear QSPR models.

Pyrimidine compounds have proven to be effective and efficient additives capable of protecting mild steel in acidic media. This class of organic compounds often functions as adsorption-type inhibitors of corrosion by forming a protective layer on the metallic substrate. The present study reports a computational study of forty pyrimidine compounds that have been investigated as sustainable inhibitors of mild steel corrosion in molar HCl solution. Quantitative structure property relationship was conducted using linear (multiple linear regression) and nonlinear (artificial neural network) models. Standardization method was employed in variable selection yielding five top chemical descriptors utilized for model development along with the inhibitor concentration. Multiple linear regression model yielded a fair predictive model. Artificial neural network model developed using k-fold cross-validation method provided a comprehensive insight into the corrosion protection mechanism of studied pyrimidine-based corrosion inhibitors. Using a multilayer perceptron with Levenberg-Marquardt algorithm, the study obtained the optimal model having a MSE of 8.479, RMSE of 2.912, MAD of 1.791, and MAPE of 2.648. The optimal neural network model was further utilized to forecast the protection capacities of nine non-synthesized pyrimidine derivatives. The predicted inhibition efficiencies ranged from 89 to 98%, revealing the significance of the considered chemical descriptors, the predictive capacity of the developed model, and the potency of the theoretical inhibitors.

Electrochemical Sensors for Determination of Bromate in Water and Food Samples-Review.

The application of potassium bromate in the baking industry is used in most parts of the world to avert the human health compromise that characterizes bromates carcinogenic effect. Herein, various methods of its analysis, especially the electrochemical methods of bromate detection, were extensively discussed. Amperometry (AP), cyclic voltammetry (CV), square wave voltammetry (SWV), electrochemiluminescence (ECL), differential pulse voltammetry and electrochemical impedance spectroscopy (EIS) are the techniques that have been deployed for bromate detection in the last two decades, with 50%, 23%, 7.7%, 7.7%, 7.7% and 3.9% application, respectively. Despite the unique electrocatalytic activity of metal phthalocyanine (MP) and carbon quantum dots (CQDs), only few sensors based on MP and CQDs are available compared to the conducting polymers, carbon nanotubes (CNTs), metal (oxide) and graphene-based sensors. This review emboldens the underutilization of CQDs and metal phthalocyanines as sensing materials and briefly discusses the future perspective on MP and CQDs application in bromate detection via EIS.

Electrochemical Characterization and Detection of Lead in Water Using SPCE Modified with BiONPs/PANI.

The need for constant assessment of river water qualities for both aquatic and other biological survival has emerged a top priority, due to increasing exposure to industrial pollutants. A disposable screen print carbon electrode was modified with a conductive polymer (PANI) and Zn and/or Cu oxides NPs, obtained through bioreduction in citrus peel extracts (lemon and orange), for ultra-sensitive detection of PB2+, in the Crocodile River water sample. The synthesized materials were characterized with Fourier-transform infra-red spectroscopy (FTIR), ultra-violet visible spectroscopy (UV-Vis), and scanning electron microscopy (SEM). The SPC-modified electrodes designated as SPCE/LPE/BiONPs/PANI and SPCE/OPE/BiONPs/PANI were characterized using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) and eventually deployed in the electrochemical detection of PB2+ in water using square wave voltammetry (SWV) technique. The electrochemical responses of the modified electrodes for both CV and EIS in 0.1 M HCl demonstrated enhanced performance relative to the bare SPCE. A detection and quantification limit of 0.494 ppb and 1.647 were obtained at SPCE/LPE/BiONPs/PANI, respectively, while a detection and quantification limit of 2.79 ppb and 8.91 ppb, respectively, were derived from SPCE/OPE/BiONPs/PANI. The relative standard deviations (RSD) for SPC electrode at a 6.04 µM PB2+ analyte concentration was 4.76% and 0.98% at SPCE/LPE/BiONPs/PANI and SPCE/LPE/BiONPs/PANI, respectively. The effect of copper, zinc, iron, cobalt, nickel, and magnesium on the stripping peaks of PB2+ at SPCE/OPE/BiONPs/PANI, showed no significant change except for cobalt, with about 17.67% peak current drop. The sensors were assessed for possible determination of PB2+ in spiked river water samples. The average percentage recovery and RSD calculated were 94.25% and 3.74% (n = 3) at SPCE/LPE/BiONPs/PANI and, 96.70% and 3.71% (n = 3) at SPCE/OPE/BiONPs/PANI, respectively. Therefore, the fabricated sensor material could be used for environmental assessment of this highly toxic heavy metal in the aquatic system.

Green synthesis of copper oxide nanoparticles using extracts of Solanum macrocarpon fruit and their redox responses on SPAu electrode.

In this work, CuO nanoparticles (NPs) were prepared from the aqueous extracts of Solanum macrocarpon fruit by using the conventional heating (CuO(h) NPs) and microwave irradiation (CuO(m) NPs) methods. The synthesized nanoparticles were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The SEM analysis revealed that the CuO NPs from both routes contained essentially smooth surfaces, and displayed some degree of agglomeration. The TEM analysis confirmed some spherical morphology with mean particle sizes of 35.60 ± 6.24 nm and 47.14 ± 6.18 nm for the CuO(h) and CuO(m) NPs respectively. While the CuO(m) NPs possessed a single-phase consistent with the face cantered cubic structure of copper oxide, the CuO(h) NPs showed some extra peaks attributed to Cu2O NPs as secondary phase. Electrochemical studies were conducted in order to evaluate the electrochemical properties of the NPs. The responses of a gold screen-printed electrode surface treated with both NPs showed that their redox behaviours on (Fe(CN)6)3-/4- probe and KCl electrolytes vary significantly. In (Fe(CN)6)3-/4- probe, the SPAuE/CuO(h) showed enhanced electrochemical response relative to the bare, while the SPAuE/CuO(m) showed a lower current response than the bare. However, in the KCl electrolye, the SPAuE/CuO(h) and SPAuE/CuO(m) were highly electroactive and demonstrated peak current magnitude that was about 26.5 and 83.38 times higher than that of the bare. In this KCl medium, the magnitude of the oxidation peak current of Cu2+ for SPAuE/CuO(m) was about 3 times higher than that of SPAuE/CuO(h). The percentage contraction in redox coordinates between the 1st and 10th scans in both electrodes were 3.88 and 19.28% for SPAuE/CuO(h) and SPAuE/CuO(m) respectively. Thus, the choice of green synthesis route could be exploited in different fields where green NPs is desired.

Conductive Nanodiamond-Based Detection of Neurotransmitters: One Decade, Few Sensors.

Nanodiamond (ND) is a class of carbon nanomaterial with covalently connected sp3 carbon atoms in its core and an sp2 carbon adorned surface via edge defects or doping. Endogenous chemicals that provoke physiological responses in the human system called neurotransmitters (NTs) have been detected with several sensors with carbon-based nanomaterials. Nanodiamonds (NDs), another class of carbon nanomaterial, have shown the requisite surface area and electrocatalytic activity toward NTs in the past decade. Surprisingly, only a few electrochemical ND based NT sensors are available. This work briefly looked into the performance of the available sensors, NT and ND interactions, and the possible reason for data paucity on the subject matter.

Electrochemical Detection of Endosulfan Using an AONP-PANI-SWCNT Modified Glassy Carbon Electrode.

This report narrates the successful application of a fabricated novel sensor for the trace detection of endosulfan (EDS). The sensor was made by modifying a glassy-carbon electrode (GCE) with polyaniline (PANI), chemically synthesized antimony oxide nanoparticles (AONPs), acid-functionalized, single-walled carbon nanotubes (fSWCNTs), and finally, the AONP-PANI-SWCNT nanocomposite. The electrochemical properties of the modified electrodes regarding endosulfan detection were investigated via cyclic voltammetry (CV) and square-wave voltammetry. The current response of the electrodes to EDS followed the trend GCE-AONP-PANI-SWCNT (-510 µA) > GCE-PANI (-59 µA) > GCE-AONPs (-11.4 µA) > GCE (-5.52 µA) > GCE-fSWCNTs (-0.168 µA). The obtained results indicated that the current response obtained at the AONP-PANI-SWCNT/GCE was higher with relatively low overpotential compared to those from the other electrodes investigated. This demonstrated the superiority of the AONP-PANI-SWCNT-modified GCE. The AONP-PANI-SWCNT/GCE demonstrated good electrocatalytic activities for the electrochemical reduction of EDS. The results obtained in this study are comparable with those in other reports. The sensitivity, limit of detection (LoD), and limit of quantification (LoQ) of AONP-PANI-SWCNT/GCE towards EDS was estimated to be 0.0623 µA/µM, 6.8 µM, and 20.6 µM, respectively. Selectivity, as well as the practical application of the fabricated sensor, were explored, and the results indicated that the EDS-reduction current was reduced by only 2.0% when interfering species were present, whilst average recoveries of EDS in real samples were above 97%.

Green and Traditional Synthesis of Copper Oxide Nanoparticles-Comparative Study.

The current study compared the synthesis, characterization and properties of copper oxide nanoparticles (CuO) based on green and traditional chemical methods. The synthesized CuO were confirmed by spectroscopic and morphological characterization such as ultraviolet-visible (UV-vis) spectroscopy, fourier transform infrared (FTIR) spectroscopy, zeta potential, scanning electron microscopy (SEM) and energy dispersed X-ray (EDX). Electrochemical behavior of the modified electrodes was done using cyclic voltammetry (CV) in ferricyanide/ferrocyanide ([Fe(CN)6]4-/[Fe(CN)6]3-) redox probe. As revealed by UV spectrophotometer, the absorption peaks ranged from 290-293 nm for all synthesized nanoparticles. Based on SEM images, CuO were spherical in shape with agglomerated particles. Zeta potential revealed that the green CuO have more negative surface charge than the chemically synthesized CuO. The potential of the green synthesized nanoparticles was higher relative to the chemically synthesized one. Cyclic voltammetry studies indicated that the traditional chemically synthesized CuO and the green CuO have electrocatalytic activity towards the ferricyanide redox probe. This suggests that the green CuO can be modified with other nanomaterials for the preparation of electrochemical sensors towards analytes of interest.

Synthesis, Electrochemical Studies, and Antimicrobial Properties of Fe3O4 Nanoparticles from Callistemon viminalis Plant Extracts.

Less toxic, environmentally safe green-mediated iron (III) oxide nanoparticles (Fe3O4-NP) synthesized using Callistemon viminalis (C. viminalis) leaf (Fe3O4-NPL) and flower (Fe3O4-NPF) extracts is reported in this work for the first time. Total flavonoids and phenols present in the plant extracts were determined. Characterization of the nanoparticles was carried out using Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible spectroscopy (UV-VIS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Malvern zeta sizer. Other properties of the nanoparticles were investigated using the thermogravimetric analyser and cyclic voltammetry. The average particle sizes obtained for Fe3O4-NPL and Fe3O4-NPF were 17.91 nm and 27.93 nm, respectively. Fe3O4-NPL exhibited an excellent electrochemical activity when compared with Fe3O4-NPF based on a stability study using cyclic voltammetry and regression value. Additionally, Fe3O4-NPF displayed excellent antimicrobial activity against Bacillus cereus, Salmonella enteritidis, and Vibrio cholerae with zones of inhibition of 13, 15, and 25 mm, respectively. Simple, cheap, and less toxic green-mediated iron (III) oxide nanoparticles synthesized from C. viminalis leaf (Fe3O4-NPL) and flower (Fe3O4-NPF) extracts hold the potential of being used to control the activity of pathogenic bacteria of health importance and as an electrochemical sensor for both biological and environmental analytes.

Carbon-Based Quantum Dots for Electrochemical Detection of Monoamine Neurotransmitters-Review.

Imbalance in the levels of monoamine neurotransmitters have manifested in severe health issues. Electrochemical sensors have been designed for their determination, with good sensitivity recorded. Carbon-based quantum dots have proven to be an important component of electrochemical sensors due to their high conductivity, low cytotoxicity and opto-electronic properties. The quest for more sensitive electrodes with cheaper materials led to the development of electrochemical sensors based on carbon-based quantum dots for the detection of neurotransmitters. The importance of monoamine neurotransmitters (NTs) and the good electrocatalytic activity of carbon and graphene quantum dots (CQDs and GQDs) make the review of the efforts made in the design of such sensors for monoamine NTs of huge necessity. The differences and the similarities between these two quantum dots are highlighted prior to a discussion of their application in electrochemical sensors over the last ten years. Compared to other monoamine NTs, dopamine (DA) was the most studied with GQDs and CQD-based electrochemical sensors.