Detection of the antiviral activity of epicatechin isolated from Salacia crassifolia (Celastraceae) against Mayaro virus based on protein C homology modelling and virtual screening.

Mayaro fever, caused by Mayaro virus (MAYV) is a sub-lethal disease with symptoms that are easily confused with those of dengue fever, except for polyarthralgia, which may culminate in physical incapacitation. Recently, outbreaks of MAYV have been documented in metropolitan areas, and to date, there is no therapy or vaccine available. Moreover, there is no information regarding the three-dimensional structure of the viral proteins of MAYV, which is important in the search for antivirals. In this work, we constructed a three-dimensional model of protein C of MAYV by homology modelling, and this was employed in a manner similar to that of receptors in virtual screening studies to evaluate 590 molecules as prospective antiviral agents. In vitro bioassays were utilized to confirm the potential antiviral activity of the flavonoid epicatechin isolated from Salacia crassifolia (Celastraceae). The virtual screening showed that six flavonoids were promising ligands for protein C. The bioassays showed potent antiviral action of epicatechin, which protected the cells from almost all of the effects of viral infection. An effective concentration (EC50) of 0.247 µmol/mL was observed with a selectivity index (SI) of 7. The cytotoxicity assay showed that epicatechin has low toxicity, with a 50% cytotoxic concentration (CC50) greater than 1.723 µmol/mL. Epicatechin was found to be twice as potent as the reference antiviral ribavirin. Furthermore, a replication kinetics assay showed a strong inhibitory effect of epicatechin on MAYV growth, with a reduction of at least four logs in virus production. Our results indicate that epicatechin is a promising candidate for further testing as an antiviral agent against Mayaro virus and other alphaviruses.

In Situ Impregnation of Silver Nanoclusters in Microporous Chitosan-PEG Membranes as an Antibacterial and Drug Delivery Percutaneous Device.

An in situ synthesis method for preparing silver nanoclusters (AgNCs) embedded in chitosan-polyethylene glycol (CS-PEG) membranes is disclosed. The aim is to develop implantable multifunctional devices for biofilm inhibition and drug release to reduce percutaneous device related complications (PDRCs). A multiple array of characterization techniques confirmed the formation of fluorescent AgNCs with sizes of ∼3 nm uniformly distributed in CS-PEG matrix and their active role in determining the fraction and interconnectivity of the microporous membranes. The presence and increasing contents of AgNCs enhanced the mechanical stability of membranes and decreased their susceptibility to degradation in the presence of lysozyme and H2O2. Moreover, the presence and increasing concentrations of AgNCs hindered biofilm formation against Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive) and enabled a sustainable release of an anti-inflammatory drug naproxen in vitro until 24 h. The overall results gathered and reported in this work make the AgNCs impregnated CS-PEG membranes highly promising multifunctional devices combining efficient antibacterial activity and biocompatibility with active local drug delivery.

Fabricating and characterising ZnO-ZnS-Ag2S ternary nanostructures with efficient solar-light photocatalytic activity.

ZnO-ZnS-Ag2S ternary nanostructures were prepared by a simple and low-cost chemical precipitation method. The sample was characterised by X-ray diffraction, energy-dispersive X-ray, UV-Vis-NIR, Raman and Fourier transform infrared spectroscopy. Morphology of the sample was studied by scanning electron microscopy and it was observed that ZnO nanoplates were covered with ZnS and Ag2S nanoparticles. A high resolution transmission electron microscope was used to obtain further information about the crystalline domains of the prepared ternary nanostructure. The Kramers-Kronig method and classical dispersion theory were utilised to study the optical properties of the sample in the far-infrared region. Photocatalytic activity of the prepared samples was also attained in the gas-solid phase by using a solar lamp (simulating outdoor lighting) and monitoring NOx degradation.

Potential distribution and cost estimation of the damage caused by Cryptotermes brevis (Isoptera: Kalotermitidae) in the Azores.

In the Azores archipelago, a significant proportion of buildings are infested with the urban exotic drywood termite Cryptotermes brevis (Walker), causing major economical and patrimonial losses. This work aims to understand the potential spread of this termite species in the Azores and estimate the costs for both treatment and reconstruction of infested buildings in the entire archipelago. A maximum entropy niche modeling process was used to determine the potential occurrence of the species on each island. Different scenarios were built using independent global and regional incidence and environmental data. Both projections reveal the same pattern. Generally, the probability of occurrence is higher near the coast line, where, in Azores, the majority of the towns and villages are located. We also predict that the infestation has potential to spread to yet unaffected towns and islands. It is estimated that the cost of treating all currently infested buildings in the archipelago is Euro 51 million, while reconstruction of the same buildings would rise the costs to Euro 175 million. We predict that the absence of a control strategy will cause a further expansion of the pest to more localities in the Azores. An estimate to future scenarios implies higher costs, with treatment and rebuilding values rising up to eight times the current values.

Effect of calcium hydroxide and endodontic irrigants on fibre post bond strength to root canal dentine.

AIM: To analyse the effect of calcium hydroxide paste, endodontic irrigants and time of application on the bond strength of fibre posts to root canal dentine. METHODOLOGY: Seventy bovine incisors were divided into 7 groups according to removal of calcium hydroxide and distilled water (CHW) (immediate - I; 21 days - 21 days; 6 months - 6 months) and endodontic irrigant (1% sodium hypochlorite - SH; 1% sodium hypochlorite + 17% EDTA - SHE). Fibre posts were cemented (RelyX U100), after which the roots were serially sectioned and submitted to a micro-push-out test. Data were analysed using two-way anova followed by the Tukey's and the Dunnett's tests (α = 0.05). RESULTS: The CHW groups were not significantly different from the control group in 13 of the 18 associated factors (P > 0.05). There were significant reductions in bond strength in the cervical (P = 0.0216) and middle (P = 0.0017) thirds of the root at 6 months in groups irrigated with SH. Irrigation with SHE reduced the bond strength significantly in the middle (P = 0.0488) and apical (P = 0.0252) thirds of the roots in the immediate groups and in the middle third (P = 0.0287) in the 21-day group. Bond strength was greater in the cervical than in the apical thirds of all immediate and 21-day groups (P < 0.05). CONCLUSIONS: Bond strength of groups that received CH paste was similar to that found in the control group in 13 of the 18 associated factors. EDTA and SH reduced bond strength in specimens in the immediate (middle and apical thirds) and 21-day (middle third) groups. There was a significant reduction in bond strength in the groups irrigated with SH and tested at 6 months (cervical and middle thirds). There was a predominance of adhesive failures between resin cement and dentine in all groups.

Synthesis, bioactivity and preliminary biocompatibility studies of glasses in the system CaO-MgO-SiO2-Na2O-P2O5-CaF2.

New compositions of bioactive glasses are proposed in the CaO-MgO-SiO(2)-Na(2)O-P(2)O(5)-CaF(2) system. Mineralization tests with immersion of the investigated glasses in simulated body fluid (SBF) at 37°C showed that the glasses favour the surface formation of hydroxyapatite (HA) from the early stages of the experiments. In the case of daily renewable SBF, monetite (CaHPO(4)) formation competed with the formation of HA. The influence of structural features of the glasses on their mineralization (bioactivity) performance is discussed. Preliminary in vitro experiments with osteoblasts' cell-cultures showed that the glasses are biocompatible and there is no evidence of toxicity. Sintering and devitrification studies of glass powder compacts were also performed. Glass-ceramics with attractive properties were obtained after heat treatment of the glasses at relatively low temperatures (up to 850°C).

Highly adherent bioactive glass thin films synthetized by magnetron sputtering at low temperature.

Thin (380-510 nm) films of a low silica content bioglass with MgO, B(2)O(3), and CaF(2) as additives were deposited at low-temperature (150°C) by radio-frequency magnetron sputtering onto titanium substrates. The influence of sputtering conditions on morphology, structure, composition, bonding strength and in vitro bioactivity of sputtered bioglass films was investigated. Excellent pull-out adherence (~73 MPa) was obtained when using a 0.3 Pa argon sputtering pressure (BG-a). The adherence declined (~46 MPa) upon increasing the working pressure to 0.4 Pa (BG-b) or when using a reactive gas mixture (~50 MPa). The SBF tests clearly demonstrated strong biomineralization features for all bioglass sputtered films. The biomineralization rate increased from BG-a to BG-b, and yet more for BG-c. A well-crystallized calcium hydrogen phosphate-like phase was observed after 3 and 15 days of immersion in SBF in all bioglass layers, which transformed monotonously into hydroxyapatite under prolonged SBF immersion. Alkali and alkali-earth salts (NaCl, KCl and CaCO(3)) were also found at the surface of samples soaked in SBF for 30 days. The study indicated that features such as composition, structure, adherence and bioactivity of bioglass films can be tailored simply by altering the magnetron sputtering working conditions, proving that this less explored technique is a promising alternative for preparing implant-type coatings.

Biological responses of brushite-forming Zn- and ZnSr- substituted beta-tricalcium phosphate bone cements.

The core aim of this study was to investigate zinc (Zn)- and zinc and strontium (ZnSr)-containing brushite-forming beta-tricalcium phosphate (TCP) cements for their effects on proliferation and differentiation of osteoblastic-like cells (MC3T3-E1 cell line) as well as for their in vivo behaviour in trabecular bone cylindrical defects in a pilot study. In vitro proliferation and maturation responses of MC3T3-E1 osteoblastic-like cells to bone cements were studied at the cellular and molecular levels. The Zn- and Sr-containing brushite cements were found to stimulate pre-osteoblastic proliferation and osteoblastic maturation. Indeed, MC3T3-E1 cells exposed to the powdered cements had increased proliferative rates and higher adhesiveness capacity, in comparison to control cells. Furthermore, they exhibited higher alkaline phosphatase (ALP) activity and increased Type-I collagen secretion and fibre deposition into the extracellular matrix. Proliferative and collagen deposition properties were more evident for cells grown in cements doped with Sr. The in vivo osteoconductive propertiesof the ZnCPC and ZnSrCPC cements were also pursued. Histological and histomorphometric analyses were performed at 1 and 2 months after implantation, using carbonated apatite cement (Norian SRS) as control. There was no evidence of cement-induced adverse foreign body reactions, and furthermore ZnCPC and ZnSrCPC cements revealed better in vivo performance in comparison to the control apatite cement. Additionally, the presence of both zinc and strontium resulted in the highest rate of new bone formation. These novel results indicate that the investigated ZnCPC and ZnSrCPC cements are both biocompatible and osteoconductive, being good candidate materials to use as bone substitutes.

Injectability of brushite-forming Mg-substituted and Sr-substituted alpha-TCP bone cements.

The influence of magnesium- and strontium-substitutions on injectability and mechanical performance of brushite-forming alpha-TCP cements has been evaluated in the present work. The effects of Mg- and Sr-substitutions on crystalline phase composition and lattice parameters were determined through quantitative X-ray phase analysis and structural Rietveld refinement of the starting calcium phosphate powders and of the hardened cements. A noticeable dependence of injectability on the liquid-to-powder ratio (LPR), smooth plots of extrusion force versus syringe plunger displacement and the absence of filter pressing effects were observed. For LPR values up to 0.36 ml g(-1), the percentage of injectability was always higher and lower for Mg-containing cements and for Sr-containing cements, respectively, while all the pastes could be fully injected for LPR > 0.36 ml g(-1). The hardened cements exhibited relatively high wet compressive strength values (~17-25 MPa) being the Sr- and Mg-containing cements the strongest and the weakest, respectively, holding an interesting promise for uses in trauma surgery such as for filling bone defects and in minimally invasive techniques such as percutaneous vertebroplasty to fill lesions and strengthen the osteoporotic bone.

Biomineralization capability of adherent bio-glass films prepared by magnetron sputtering.

Radiofrequency magnetron sputtering deposition at low temperature (150 degrees C) was used to deposit bioactive glass coatings onto titanium substrates. Three different working atmospheres were used: Ar 100%, Ar + 7%O(2), and Ar + 20%O(2). The preliminary adhesion tests (pull-out) produced excellent adhesion values (approximately 75 MPa) for the as-deposited bio-glass films. Bioactivity tests in simulated body fluid were carried out for 30 days. SEM-EDS, XRD and FTIR measurements were performed. The tests clearly showed strong bioactive features for all the prepared films. The best biomineralization capability, expressed by the thickest chemically grown carbonated hydroxyapatite layer, was obtained for the bio-glass coating sputtered in a reactive atmosphere with 7% O(2).

Development of porous HAp and ß-TCP scaffolds by starch consolidation with foaming method and drug-chitosan bilayered scaffold based drug delivery system.

The inability to maintain high concentrations of antibiotic at the site of infection for an extended period of time along with dead space management is still the driving challenge in treatment of osteomyelitis. Porous bioactive ceramics such as hydroxyapatite (HAp) and beta-tri calcium phosphate (ß-TCP) were some of the alternatives to be used as local drug delivery system. However, high porosity and high interconnectivity of pores in the scaffolds play a pivotal role in the drug release and bone resorption. Ceftriaxone is a cephalosporin that has lost its clinical popularity. But has recently been reported to exhibit better bactericidal activity in vitro and reduced probability of resistance development, in combination with sulbactam, a ß-lactamase inhibitor. In this article, a novel approach of forming HAp and pure ß-TCP based porous scaffolds by applying together starch consolidation with foaming method was used. For the purpose, pure HAp and ß-TCP were prepared in the laboratory and after thorough characterization (including XRD, FTIR, particle size distribution, etc.) the powders were used for scaffold fabrication. The ability of these scaffolds to release drugs suitably for osteomyelitis was studied in vitro. The results of the study indicated that HAp exhibited better drug release profile than ß-TCP when drug was used alone indicating the high influence of the carrier material. However, this restriction got relaxed when a bilayered scaffold was formed using chitosan along with the drug. SEM studies along with EDAX on the drug-chitosan bilayered scaffold showed closest apposition of this combination to the calcium phosphate surface.

Chitosan and polyethylene glycol based membranes with antibacterial properties for tissue regeneration.

The prevention of microbial infections associated with implantable medical devices and superficial wounds represents one of the main research strategies in the field of biomaterials. The present study reports on the development of composite membranes of Chitosan (CS)-Polyethylene glycol (PEG) matrix, incorporating particles of biphasic calcium phosphate (BCP), zinc oxide (ZnO) and copper oxide (CuO). The properties that are relevant for intended applications in tissue regeneration and antibacterial coatings of implants were assessed. It was found that the addition of 1% (w/w - relative to the mass of CS) of each metal oxide promoted satisfactory bacteriostatic activity and exhibited no cytotoxic effects towards the Vero cell line. The formation of bonds between the CS/PEG matrix and ionic species from the powders enhanced the cross-linking degree and mechanical properties of composite membranes in comparison to the non-doped membrane with the same polymer matrix (CS/PEG = 70/30%). A gradual degradation of the composite membranes over the immersion time in simulated body fluid (SBF) was accompanied by a continuous surface deposition of uniform apatite layer.

Diagnosis of metastasis in castration-resistant prostate cancer patients: decision algorithm in imaging tests. / Diagnóstico de metástasis en pacientes con cáncer de próstata resistente a la castración: algoritmo de decisión en pruebas de imagen.

INTRODUCTION: In castration-resistant prostate cancer (CRPC), early detection of metastases is essential for the selection of treatment, and prevention of bone complications. However detecting incipient metastases remains a challenge as the conventional radiological tests (bone scintigraphy or computerised tomography) lack sufficient sensitivity. Diagnostic imaging techniques are currently available that have greater sensitivity and specificity, but are little used due to shortfalls in the recommendations. OBJECTIVE: To create an algorithm that indicates the most suitable diagnostic imaging techniques for the different M0 CRPC patient profiles based on the scientific evidence. EVIDENCE ACQUISITION: Meetings were held with eight experts in Urology, Pathological Anatomy, Radiodiagnostics and Nuclear Medicine organised by the Andalusian Association of Urology, in which the recommendations and scientific evidence on each of the diagnostic imaging techniques were reviewed. SUMMARY OF THE EVIDENCE: We present the current recommendations for the detection of metastasis in M0 CRPC patients, the patients that would benefit from early detection, and summarise the evidence to support the use of each of the new techniques. CONCLUSIONS: Techniques such as 18F-Choline PET/CT or DWWB MRI and probably open MRI have been demonstrated to have good sensitivity and specificity for patients with low PSA (<10ng/ml). Their inclusion in routine clinical practice will help improve the early detection of metastasis in CRPC patients.

Bone ingrowth in macroporous Bonelike for orthopaedic applications.

The aim of this study was to evaluate the biological behaviour of porous scaffold structures of Bonelike which is suitable for either direct clinical use or tissue engineering applications. Porous cylindrical specimens 8x10mm were implanted in the lateral aspect of the tibia of 13 patients (mean age 54 years), during osteotomy surgery for the treatment of medial compartment osteoarthritis of the knee. Implanted cylinders were retrieved at the same time as the removal of the blade plates at 3, 6, 9 and 12 months. Scanning electron microscopy and histological evaluations were performed to observe the biological responses of human bone tissue to porous Bonelike. The penetration depth was determined for all implantation periods, and after 6 months it was already possible to see new bone in the centre of the implanted cylinders, which gives 100% of penetration depth for all implantations periods except for 3 months when bone could only be seen in the peripherical region. Regarding the percentage of the area covered by new bone calculated from two-dimensional histological sections, values of 53+/-15, 76+/-12 and 88+/-9% were achieved for 6, 9 and 12 months, respectively. Due to its structural features porous Bonelike permitted effective vascularization and bone ingrowth, and therefore was fully osteointegrated as shown in the histological surveys. A slow biomaterial degradation with implantation time is envisaged since the material has displayed surface degradation. Bonelike scaffolds show potential for complete ingrowth of osseous tissue and restoration of vascularization throughout the defected site.

An in vitro biological and anti-bacterial study on a sol-gel derived silver-incorporated bioglass system.

OBJECTIVES: The purpose of this study was to evaluate the in vitro antibacterial and biological activity of silver-incorporated bioactive glass system SiO2-CaO-P2O5-Ag2O (AgBG). The bacteriostatic and bactericidal properties of this new quaternary glass system along with the ternary sol-gel glass system SiO2-CaO-P2O5 (BG) have been studied using Escherichia coli as a test micro-organism. The AGBG system thus appears to be a promising material for dental applications, since similar effects might be produced on a film of bacteria and mucous that grows on the teeth. METHODS: The SiO2-CaO-P2O5-Ag2O and SiO2-CaO-P2O5 glass systems were synthesized by the sol-gel technique and characterized for their physicho-chemical properties. The antibacterial activity and biological properties were evaluated by determining the minimum inhibitory concentrations (MICs). Release of Ag+ into the culture medium was measured by inductively coupled plasma (ICP) analysis. RESULTS: The in vitro antibacterial action of the SiO2-CaO-P2O5-Ag2O was compared with that of its ternary counterpart glass system. The concentrations of Ag-bioglass, in the range of 0.02-0.20 mg of Ag-bioglass per millilitre of culture medium, were found to inhibit the growth of these bacteria. The Ag-bioglass not only acts bacteriostatically but it also elicited a rapid bactericidal action. A complete bactericidal effect was elicited in the early stages of the incubation at Ag-bioglass concentration of 20 mg/ml and the ternary glass system had no effect on bacterial growth or viability. The antibacterial action of Ag-bioglass was exclusively attributed to the leaching of Ag+ ions from the glass matrix. SIGNIFICANCE: One of the major advantages of incorporating silver ions into a gel glass system is that the porous glass matrix can allow for controlled sustained delivery of the antibacterial agent to dental material, used even under anaerobic conditions such as deep in the periodontal pocket. This glass system also provides long-term action required for systems which are constantly at risk of microbial contamination.

Suitability evaluation of sol-gel derived Si-substituted hydroxyapatite for dental and maxillofacial applications through in vitro osteoblasts response.

UNLABELLED: Si-hydroxyapatite (Si-HAP) has been used in orthopedic, dental, and maxillofacial surgery as a bone substitute. OBJECTIVE: The aim of this investigation was to study the effect of Si substitution into the hydroxyapatite matrices and evaluate the biocompatibility effects of Si-HAP material in vitro with human osteoblasts. METHODS: Silicon-substituted hydroxyapatite (Si-HAP) bioceramic materials were prepared by incorporating small amounts of silicon into the structure of hydroxyapatite [Ca10(PO4)6(OH)2, HAP] through a sol-gel method. A series of silicon substitutions ranging from 0, 1, 3 and 5 mol%, which are comparable to the measured silicon contents in natural bone, were performed. RESULTS: Single-phase Si-HAP was obtained upon calcining the as-prepared powders up to 800 degrees C since no secondary phases, such as tricalcium phosphate (TCP), tetracalcium phosphate (TeCP) or calcium oxide (CaO), were identified by X-ray diffraction analysis. The effects of silicon-substituted hydroxyapatite (Si-HAP) materials towards the responses of human osteoblast-like (HOB) cells were investigated and compared with pure hydroxyapatite. SIGNIFICANCE: The Si-HAP indicated a significant increase in cell growth density with culture time irrespective of the amount of Si substituted in HAP. A high Si content (5 mol%) appears to promote rapid bone mineralization, since large amount of calcium phosphate minerals started to develop across the ECM by day 31 for a sample containing 5 mol% Si. On the other hand, a high Si content may result in fast dissolution of the material, owing to a decrease of HAP crystallite size, which might not be ideal for cell attachment for prolonged time periods. An optimum level of Si appears to exist at 3 mol%, which balances these effects.

Structural and impedance spectroscopy characteristics of BaCO3/BaSnO3/SnO2 nanocomposite: observation of a non-monotonic relaxation behavior.

A BaCO3/BaSnO3/SnO2 nanocomposite has been prepared using a co-precipitation method without adding any additives. The prepared sample was characterized by using X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), Fourier-transform infrared (FT-IR) spectroscopy, energy dispersive X-ray spectroscopy (EDS) and Raman spectroscopy. Detailed studies on the dielectric and electrical behavior (dielectric constant, complex impedance Z*, ac conductivity, and relaxation mechanisms) of the nanocomposite have been performed using the nondestructive complex impedance spectroscopy technique within the temperature range 150-400 K. The dielectric constant of the sample as a function of temperature showed the typical characteristics of a relaxor. The maximum dielectric constant value was observed to depend on frequency. The non-monotonic relaxation behavior of the prepared nanocomposite was evidenced from the spectra of loss tan, tan(δ). The relaxation kinetics was modeled using a non-Arrhenius model.

Use of atomic force microscopy as a diagnostic tool to identify orthopoxvirus.

Atomic force microscopy (AFM) is a versatile technique that permits the imaging of surfaces and generates topographical images from a variety of materials. Due to the fact that AFM requires minimum sample manipulation, it is a valuable tool for studying biological materials such as cells, DNA, bacteria and viruses. The aim of the present study was to standardize the AFM technique as a diagnostic tool for detection of naturally occurring orthopoxviruses. The samples analyzed were collected during natural outbreaks of Vaccinia virus (VACV) in dairy cattle in Brazil. These viruses are zoonotic infections; and therefore safe manipulation of all samples is required. The AFM technique would provide a more secure way to diagnose infection. By using the "in air" AFM technique after purification and inactivation process, relatively crude preparations of viruses were visualized rapidly. Details for efficient sample preparation and AFM imaging are described. The AFM technique provides a rapid and biosecure tool for the diagnosis of emerging orthopoxviruses and has potential as a tool for screening bioterrorism samples.

In vivo hydroquinone exposure impairs allergic lung inflammation in rats.

Hydroquinone (HQ) is naturally found in the diet, drugs, as an environmental contaminant and endogenously generated after benzene exposure. Considering that HQ alters the immune system and its several source of exposures in the environment, we hypothesized that prolonged exposure of HQ could affect the course of an immune-mediated inflammatory response. For this purpose, male Wistar rats were intraperitoneally exposed to vehicle or HQ once a day, for 22 days with a 2-day interval every 5 days. On day 10 after exposure with vehicle or HQ, animals were ovalbumin (OA)-sensitized and OA-aerosolized challenged on day 23. HQ exposure did not alter the number of circulating leukocytes but impaired allergic inflammation, evidenced by lower number of leukocytes in the bronchoalveolar lavage fluid 24h after OA-challenge. Reduced force contraction of ex vivo tracheal segments upon OA-challenge and impaired mesentery mast cell degranulation after in situ OA-challenge were also detected in tissues from HQ exposed animals. The OA-specificity on the decreased responses was corroborated by normal trachea contraction and mast cell degranulation in response to compound 48/80. In fact, lower levels of circulating OA-anaphylactic antibodies were found in HQ exposed rats, as assessed by passive cutaneous anaphylaxis assay. The reduced level of OA-anaphylactic antibody was not dependent on lower number or proliferation of lymphocytes. Nevertheless, lower expression of the co-stimulatory molecules CD6 and CD45R on OA-activated lymphocytes from HQ exposed rats indicate the interference of HQ exposure with signaling of the humoral response during allergic inflammation. Together, these data indicate specific effects of HQ exposure manifested during an immune host defense.