Volumetric study of sphenoid sinuses: anatomical analysis in helical computed tomography.

PURPOSE: The sphenoid sinus is the most inaccessible part of the face, being inside the sphenoid bone and closely related to numerous vital neural and vascular structures. The objective of this study was to analyze and evaluate the variation of anatomy and the volume of the sphenoid sinus using helical computed tomography and medical imaging software. MATERIALS AND METHODS: A total of 47 helical CT scans of sinuses of male and female individuals aged 18-86 years were selected. The images were formatted using ITK-SNAP software, consisting of three steps: (1) segmentation; (2) volumetric analysis and (3) 3D reconstruction. The sphenoid sinuses were also classified according to Hammer, i.e., in conchal, pre-sellar, sellar and post-sellar types. A single investigator, who is specialist in dental radiology and was trained and calibrated, performed the volume and image analysis. After 15 days, the segmentations were repeated. RESULTS: The Dunn's multiple comparison test revealed significant differences in the volume rankings between the right and left sides (P = 0.0002), with the post-sellar type presenting the greatest volume on the right side compared to pre-sellar and sellar types. In the left sphenoid sinuses, the post-sellar type showed the greatest volume. The Lin's correlation coefficient showed excellent reproducibility values. CONCLUSIONS: According to the applied methodology, it was found that the volume of the sphenoid sinus was influenced by neither age nor gender (P > 0.005). There was difference in the volumes of sphenoid sinus on the right and left sides and in the anatomical classification.

Dentoskeletal and Soft Tissue Effects in the Treatment of Class II Malocclusion with Klammt's Elastic Open Activator.

AIM: The purpose of this study was to evaluate the dentoskeletal and soft tissue effects resulting from treatment with Klammt's elastic open activator (EOA) functional orthopedic appliance in patients with Class II malocclusion characterized by mandibular deficiency. MATERIALS AND METHODS: Teleradiographs were evaluated in the lateral aspect of the initial (T1) and final (T2) orthopedic phases for 16 patients with Class II, Division 1 malocclusion. The age range was from 9 to 11.2 years, with a mean age of 9.9 years. The cephalometric points were demarcated, and cephalometric measurements were obtained by the same investigator to avoid interobserver variability. RESULTS: The EOA promoted increased lower anterior facial height (LAFH), increased effective mandibular length, clockwise rotation of the mandible, retrusion and verticalization of the upper incisors, proclination and protrusion of the lower incisors, extrusion of the upper molars, mesial movement of the lower molars and anterior projection of the lower lip. CONCLUSION: Skeletal changes characterized by an increase in mandibular length and dentoalveolar changes with an emphasis on the verticalization and retrusion of the upper incisors, proclination of the lower incisors and mesial positioning of the lower molars were key to improving the occlusal relationship and esthetic facial factors. CLINICAL SIGNIFICANCE: The EOA is well indicated in patients with Class II malocclusion due to mandibular deficiency with increased overbite, proclined upper incisors and verticalized lower incisors.

In vivo three-dimensional cephalometric landmarks using CBCT for assessment of condylar volume and surface in individuals with Class I, II, and III malocclusions.

OBJECTIVE: To assess volume and surface of the mandibular condyle on cone beam computed tomography (CBCT) scans by comparing Class I, II, and III malocclusions. METHODS: CBCT scans of 55 patients were assessed to measure ANB angle, condyle volume, and surface by using VistaDent software. The values were compared between the different skeletal malocclusions and correlated to gender and sides. Kruskal-Wallis test was used for comparison of malocclusions and Mann-Whitney test and Wilcoxon test for comparisons of genders and sides. Statistical significance was defined as p < 0.05. RESULTS: There were no significant differences in volume (p = 0.588) and surface (p = 0.830) between the malocclusion classes. The comparison between sides showed a statistically significant difference for surface (p = 0.038). CONCLUSION: Condylar volume and surface evaluated on CBCT scans showed no statistically different values for Class I, II, and III malocclusions.

Effect of soft laser in bone repair after expansion of the midpalatal suture in dogs.

INTRODUCTION: The purpose of this research was to study the influence of soft laser treatment on the process of bone repair after expansion of the midpalatal suture. METHODS: The sample for this case-control experimental study was 11 dogs. They were randomly divided into 2 groups, both of which underwent rapid maxillary expansion with a hyrax appliance. The animals in group 1 were also treated with laser therapy. They were killed, and histologic specimens of the palatal suture were prepared. The Student t test was applied for independent data, and the Mann-Whitney test was used for nonparametric data. RESULTS: A significant difference was observed in the quality of the palatal sutures between the animals in groups 1 and 2. The connective tissues of the sutures in the group 1 animals were similar to the original configurations, with more advanced osteogenesis and fibrogenesis, compared with those of group 2. CONCLUSIONS: Soft laser appears to influence the behavior of the repair process, contributing to suture reorganization and palatal bone osteogenesis during and after expansion.

Evaluation of lower anterior dental changes in patients treated with self-ligating brackets.

The aim of this study was to evaluate and compare changes in linear distance and inclination of lower incisors and canines and intercanine distance after a 30 months orthodontic treatment with self-ligating appliances. Seven patients were treated orthodontically with a Roth prescription passive self-ligating bracket. To perform the measurements and comparisons, CBCT scans were taken before the start of the orthodontic treatment (T1) and after a period of 30 months treatment (T2). The following measurements were performed: (1) the lower incisors and canines inclination in relation to the mandibular plane, (2) intercanine linear distance in millimeters and (3) linear distance in millimeters of the incisal and apical part of lower anterior teeth to a plane (POGM) passing through pogonion point and perpendicular to the mandibular plane. No significant difference were observed between T1 and T2 for canine inclination (p = 0.835), incisors inclination (p = 0.149), canine incisal distance to POGM (p = 0.423) and incisors incisal distance to POGM (p = 0.966), however canine apical distance (p = 0.049) and incisors apical distance (p = 0.002) to POGM was lower at T1 than at T2. The intercanine distance was significantly lower (p = 0.022) at T1 when compared to T2. The use of passive self-ligating brackets in orthodontic treatment to solve 4 mm tooth crowding were able to produce dental arch expansion by bodily tooth movement.

Agenesis of all permanent maxillary incisors: A rare clinical case with an interdisciplinary solution.

BACKGROUND: Clinical cases involving agenesis of all four maxillary incisors are rare, with no previous reports in the literature. CASE REPORT: The present case report describes an orthodontic treatment combined with esthetic dentistry in a 10-year-old girl with agenesis of all four permanent maxillary incisors, anterior crossbite, permanence of deciduous maxillary canines and transmigration of permanent maxillary canines into the region of the maxillary central incisors. For this case, it was decided on space closure using a fixed orthodontic apparatus and reshaping of the first premolars transforming them into canines. Porcelain veneers were used on the permanent and deciduous canines, substituting the maxillary central and lateral incisors, respectively. Regarding outcome, there was an improvement in facial profile, correction of the anterior crossbite, satisfactory intercuspidation of the teeth and significant esthetic improvement in smile. Maintaining the patient´s natural dentition also kept the bone plate intact for future placement of implants to substitute maxillary deciduous canines at the appropriate age. CONCLUSIONS: Interdisciplinary planning combining orthodontics and esthetic dentistry was key in resolving this case. Key words:Tooth agenesis, upper incisors, orthodontic treatment.

Investigation on the relationship of dimensions of the maxillary sinus drainage system with the presence of sinusopathies: a cone beam computed tomography study.

OBJECTIVE: This study sought to assess the relationship between the dimensions of the maxillary sinus drainage system with the content of sinuses. DESIGN: Three-hundred cone beam computed tomography images were selected from a database (105 males and 195 females). The images were assessed by a single investigator, trained and calibrated, performing image analysis. The length of the infundibulum and the ostium height in both maxillary sinuses were measured. The data were analyzed using Minitab 16, using 5% as a critical p-value. RESULTS: A significant gender difference was also found for presence in the normal content of sinus for females and presence of antral pseudocyst for males (p < 0.05). Subjects with normal content in the maxillary sinus present lower ostium height values. There were statistically significant with presence of and higher ostium height values and antral pseudocyst (p < 0.01). CONCLUSION: The current study results demonstrated that some sinusopathies were significantly related to dimensions of maxillary sinus drainage.

Soft-tissue treatment changes in Class II Division 1 malocclusion with and without extraction of maxillary premolars.

INTRODUCTION: In this study, we compared the soft-tissue changes and posttreatment status after nonextraction and maxillary premolar extraction treatment in patients with Class II Division 1 malocclusion. METHODS: Lateral cephalograms of 44 patients, divided into 2 matching groups, were evaluated. Group 1 comprised 22 patients (10 boys, 12 girls) treated nonextraction with initial and final mean ages of 12.50 and 15.12 years, respectively, and a mean treatment time of 2.62 years. This group had an initial mean overjet of 7.97 mm. Group 2 consisted of 22 patients (10 boys, 12 girls) treated with extractions of 2 maxillary premolars with initial and final mean ages of 12.86 and 15.32 years, respectively. The mean treatment time was 2.46 years, and the initial mean overjet was 8.61 mm. Independent t tests were used to compare the initial and final cephalometric status and the treatment changes between the groups. RESULTS: According to the results, only 1 soft-tissue variable showed a significant treatment change between the groups. However, at the posttreatment stage, there were no significant differences between the soft-tissue variables. CONCLUSIONS: The protocol including extraction of 2 maxillary premolars provides similar soft-tissue results as nonextraction treatment of complete Class II malocclusion.

Changes consequent to maxillary molar distalization with the bone-anchored pendulum appliance.

OBJECTIVES: This retrospective study aimed to evaluate the dentoalveolar, skeletal, and soft tissue effects obtained with bone-anchored pendulum appliance in patients with Class II malocclusion. MATERIALS AND METHODS: A total of 18 patients (4 male, 14 female) at a mean pretreatment age of 14.0 years (+1.08) were enrolled in this study. All patients were treated with the bone-anchored pendulum appliance for an average duration of 4.8 months. Only the active distalization period was evaluated with predistalization and postdistalization lateral cephalograms. Skeletal, dentoalveolar, and soft tissue variables were obtained. Based on these variables, the treatment effects were evaluated with dependent t-test. RESULTS: Correction of Class II molar relationship resulted from distal movement of 3.45 mm and tipping of 11.24° of the first maxillary molars. The premolars were distalized accompanying the molars. CONCLUSIONS: The bone-anchored pendulum appliance proved to be an effective method for distalization of maxillary molars in cases that require maximum anchorage, avoiding reciprocal mesial movement of premolars and incisors.

Assessment of condyle, masseter and temporal muscles volumes in patients with juvenile systemic lupus erythematosus: A cross-sectional study.

AIMS: The purpose of this study was to evaluate the effect of the corticosteroid therapy for both treatment of juvenile systemic lupus erythematosus and disease activity on two masticatory muscles and condyle of the temporomandibular joint. METHODS: A total of 21 controls and 48 juvenile systemic lupus erythematosus patients were investigated. Volumes of the temporal and masseter muscles and condyle of the subjects were assessed by using a 3D reconstruction in magnetic resonance imaging. The ITK-SNAP, a medical imaging software, was used for 3D reconstruction. A dental examination with registration of occlusion was performed in subjects. Data were statistically analyzed by means of the Dahlberg's test associated with paired t-test, Fisher's exact test and Chi-square. RESULTS: There was a positive correlation between temporalis muscle and age (p = 0.032), masseter volume (p = 0.029) and condyle volume (p = 0.013). The mean volume measurements of temporal and masseter muscles and condyle were not statistically associated with juvenile systemic lupus erythematosus regarding disease activity and corticosteroid therapy (p > 0.05). There were no significant differences between malocclusion and volume of muscles and condyle. CONCLUSION: This study suggested that volume of the target structures has no correlation with cumulative corticosteroid dose, disease activity, and malocclusion.

Sagittal, vertical, and transverse changes consequent to maxillary molar distalization with the pendulum appliance.

INTRODUCTION: The purpose of this study was to evaluate the skeletal and dental changes in patients who underwent distalization of their maxillary molars with pendulum appliances. METHODS: The sample consisted of 31 patients (initial mean age, 14.58 years) with Angle Class II molar relationships and all permanent teeth up to the second molars. The maxillary molars were distalized with pendulum appliances for a mean period of 5.87 months. Lateral cephalograms, 45 degrees oblique radiographs, and dental casts were obtained before and after distalization. Changes produced by the pendulum appliance were analyzed with paired t tests. RESULTS: Maxillary first molar distalization accounted for 63.5% of the space opening; mesial movement of the maxillary first premolars contributed 36.5% of the space. The mean space opening on lateral cephalograms was 7.25 mm, and the rate of molar movement was 1.23 mm per month. The mean distalization of the maxillary molars was 4.6 mm, with a mean distal crown tipping of 18.5 degrees The maxillary molars experienced expansion, with a smaller effect on the first molars than on the second molars. The pendulum appliance produced symmetrical expansion, with a rate of 1.04 mm per month on the right and 1.10 mm per month on the left. CONCLUSIONS: The pendulum appliance is effective for distalization of the maxillary molars and the establishment of a Class I molar relationship in a relatively short time. However, caution is needed to control collateral effects, including mesial movement of the first premolars and distal tipping of the molar crowns.

Dentoalveolar and skeletal changes associated with the pendulum appliance followed by fixed orthodontic treatment.

INTRODUCTION: This prospective clinical study analyzed the distalization of maxillary molars achieved by the pendulum appliance and its effect on the anchorage teeth during and after fixed orthodontic treatment. METHODS: Lateral cephalograms of 22 adolescents (15 girls, 7 boys) taken pretreatment, after distalization, after leveling and aligning, and after fixed orthodontic treatment were evaluated. The initial mean age was 14.5 years (SD = 1.80). The mean time for distalization of the maxillary molars was 5.85 months (SD = 1.82), and the total treatment time was 3.61 years (SD = 1.83). RESULTS: The pendulum appliance moved the maxillary molars distally, but with significant distal inclination, protrusion of the anterior teeth, and increase in lower anterior facial height (LAFH) due to the clockwise mandibular rotation. After fixed orthodontic treatment, the maxillary incisors and the maxillary first premolars and first molars were returned to their pretreatment anteroposterior positions. Thus, at postdistalization, there was 2.1 mm of protrusion of the maxillary first molars, despite the anchorage reinforcement (Nance button and cervical headgear worn at night during fixed appliance therapy). However, at the end of treatment, all patients had Class I molar relationships. CONCLUSIONS: The pendulum appliance followed by fixed orthodontic treatment corrected the Class II sagittal relationship, especially due to the dentoalveolar changes secondary to the spontaneous mandibular growth in the anterior direction during fixed appliance treatment.

Cervical vertebrae maturation index estimates on cone beam CT: 3D reconstructions vs sagittal sections.

OBJECTIVES: The aim of this study was to evaluate the performance of CBCT three-dimensional (3D) reconstructions and sagittal sections for estimates of cervical vertebrae maturation index (CVMI). METHODS: The sample consisted of 72 CBCT examinations from patients aged 8-16 years (45 females and 27 males) selected from the archives of two private clinics. Two calibrated observers (kappa scores: ≥0.901) interpreted the CBCT settings twice. Intra- and interobserver agreement for both imaging exhibition modes was analyzed by kappa statistics, which was also used to analyze the agreement between 3D reconstructions and sagittal sections. Correlations between cervical vertebrae maturation estimates and chronological age, as well as between the assessments by 3D reconstructions and sagittal sections, were analyzed using gamma Goodman-Kruskal coefficients (α = 0.05). RESULTS: The kappa scores evidenced almost perfect agreement between the first and second assessments of the cervical vertebrae by 3D reconstructions (0.933-0.983) and sagittal sections (0.983-1.000). Similarly, the agreement between 3D reconstructions and sagittal sections was almost perfect (kappa index: 0.983). In most divergent cases, the difference between 3D reconstructions and sagittal sections was one stage of CVMI. Strongly positive correlations (>0.8, p < 0.001) were found not only between chronological age and CVMI but also between the estimates by 3D reconstructions and sagittal sections (p < 0.001). CONCLUSIONS: Although CBCT imaging must not be used exclusively for this purpose, it may be suitable for skeletal maturity assessments.

Three-dimensional lateral pterygoid muscle volume: MRI analyses with insertion patterns correlation.

We evaluated lateral pterygoid muscle volume in closed and open mouth positions in association with anterior disc displacement, effusion and abnormal articular disc shape from three-dimensional reformations of MRI. A total of 24 MRI of a sample (15 females, 9 males) aged 19-64 years (37.2 years±11.4) were assessed. Segmentation and volumetric assessment of the total, upper and lower heads of the lateral pterygoid muscle were performed using free software. The upper head of the lateral pterygoid muscle had a smaller volume than the lower head at both sides, in the closed- and open-mouth positions. In the open-mouth position, individuals with a subdivided upper head, where one component was inserted in the articular disc and another in the mandibular head, displayed a significantly larger volume of the upper head compared to individuals who had a single attachment to the articular disc (p=0.0130). The lateral pterygoid muscle has different volumes in the closed- and open-mouth positions. Gender affected muscle volume, specifically the upper head component. Insertion type in the upper head also seemed to affect muscle volume.

Analysis on the precision of the dimensions of self-ligating brackets.

OBJECTIVE: The present study aimed to evaluate the precision of the torque applied by 0.022" self-ligating brackets of different brands, the precision of parallelism between the inner walls of their slots, and precision of their slot height. Eighty brackets for upper central incisors of eight trademarked models were selected: Abzil, GAC, American Orthodontics, Morelli, Orthometric, Ormco, Forestadent, and Ortho Organizers. Images of the brackets were obtained using a scanning electron microscope (SEM) and these were measured using the AutoCAD 2011 software. The tolerance parameters stated in the ISO 27020 standard were used as references. The results showed that only the Orthometric, Morelli, and Ormco groups showed results inconsistent with the ISO standard. Regarding the parallelism of the internal walls of the slots, most of the models studied had results in line with the ISO prescription, except the Morelli group. In assessing bracket slot height, only the Forestadent, GAC, American Orthodontics, and Ormco groups presented results in accordance with the ISO standard. The GAC, Forestadent, and American Orthodontics groups did not differ in relation to the three factors of the ISO 27020 standard. Great variability of results is observed in relation to all the variables.

Sequential imaging of an impacted mandibular second premolar migrated from angle to condyle.

Extreme distal migration of impacted teeth to the subcondylar area and condyle is very rare. Using an interesting sequence of radiographs showing the path of the tooth in the mandible, we describe the intrabony migration of a mandibular second premolar from angle to condyle in a young woman. Cone-beam computed tomography was used to establish the precise location of the tooth.

Influence of intentional ankylosis of deciduous canines to reinforce the anchorage for maxillary protraction.

INTRODUCTION: This retrospective cephalometric study analyzed the influence of intentional ankylosis of deciduous canines in patients with Class III malocclusion and anterior crossbite, in the deciduous and early mixed dentition stages, treated by orthopedic maxillary expansion followed by maxillary protraction. METHODS: Lateral cephalograms of 40 patients were used, divided in 2 groups paired for age and gender. The Ankylosis Group was composed of 20 patients (10 boys and 10 girls) treated with induced ankylosis and presenting initial and final mean ages of 7 years 4 months and 8 years 3 months, respectively, with a mean period of maxillary protraction of 11 months. The Control Group comprised 20 patients (10 boys and 10 girls) treated without induced ankylosis, with initial and final mean ages of 7 years 8 months and 8 years 7 months, respectively, with a mean period of maxillary protraction of 11 months. Two-way analysis of variance and covariance analysis were applied to compare the initial and final cephalometric variables and the treatment changes between groups. RESULTS: According to the results, the variables evidencing the significant treatment changes between groups confirmed that the intentional ankylosis enhanced the sagittal response of the apical bases (Pg-NPerp) and increased the facial convexity angles (NAP and ANB). CONCLUSIONS: The protocol involving intentional ankylosis of deciduous canines enhanced the sagittal response of the apical bases.

Evaluation of the cervical vertebrae maturation index in lateral cephalograms taken in different head positions.

The aim of this study was to evaluate if upward or downward head inclination might interfere with determination of the growth stage, using cervical vertebrae maturation index (CVMI), in order to verify the accuracy of such diagnosis when radiographs are taken with errors. Forty-nine patients, 26 females and 23 males, aged 9 to 15 years, were submitted to 3 lateral cephalograms: normal (NHP), with 15° upward head inclination (NHP-Up), and with 15° downward head inclination (NHP-Down). Three examiners evaluated the CVMI on the 147 cephalograms. The agreement among examiners was higher in the evaluation of cephalograms taken in NHP. The weighted Kappa test revealed moderate to substantial agreement between NHP and NHP-Up and between NHP and NHP-Down. There was greater agreement between NHP-Up and NHP-Down. It may be concluded that the evaluation of the CVMI on cephalograms in NHP is different as compared with radiographs taken with inclinations. Both NHP-Up and NHP-Down exhibited greater disagreement in the interpretation among examiners, since the evaluation method was not designed for cephalograms with positioning errors.

Aligner Tubes ­ uma nova opção para a correção ortodôntica sem a utilização de bráquetes / Aligner Tubes ­ a new option for orthodontic correction without the use of brackets

Resumo O número de pacientes adultos que buscam o tratamento ortodôntico tem aumentado e essa mudança no cenário da Ortodontia tem exigido dos profissionais o emprego de aparelhos estéticos que proporcionem a correção das más oclusões por meio de abordagens simplificadas, eficientes e de maior conforto. Assim sendo, este artigo tem como objetivo apresentar uma técnica alternativa que pode ser empregada pelos profissionais na correção de más oclusões simples e na resolução de recidivas de apinhamento dentário na região anterior do arco. O artigo descreve a confecção passo a passo do sistema Aligner Tubes que é constituído por tubos metálicos colados às faces vestibulares dos elementos dentários anteriores e na sequência ilustra a aplicabilidade desse método com a exemplificação de relato de um caso clínico. Conclui-se que é um sistema simplificado, estético e de baixo custo que possibilita a correção dos problemas simples, em tempo relativamente curto e com resultados satisfatórios.(AU)

Abstract The number of adult patients searching for orthodontic treatment has increased and this change in the Orthodontic routine has required from professionals the use of aesthetic devices that provide malocclusions correction through simplified, efficient, and more comfortable approaches. Therefore, this article aims to present an alternative technique that can be used by professionals in the correction of minor malocclusions and in the resolution of dental crowding recurrences in the anterior region of the arch. This article describes the step-by-step preparation of the Aligner Tubes system, which consists of metallic tubes bonded to the buccal surfaces of the anterior teeth and then illustrates the applicability of this method with one clinical case report example. It is concluded that it is a simplified, aesthetic, and low cost system that allows the correction of simple problems in a relatively short time and with satisfactory results.(AU)

Prevalência de dentes supranumerários em pacientes de Ortodontia / Supernumerary teeth prevalence in Orthodontic patients

Existem várias alterações nos arcos dentários, entre estas se encontram as de número, forma e tamanho dos dentes. O dente supranumerário representa um fator etiológico importante e frequente da má oclusão. Este trabalho teve o objetivo de avaliar a prevalência de dentes supranumerários nos pacientes tratados nos cursos de pós-graduação em Ortodontia da Universidade Cidade de São Paulo. A amostra, composta por 1117 radiografias panorâmicas de pacientes que se submeteram a tratamento ortodôntico corretivo, foi estudada quanto à distribuição da prevalência de dentes supranumerários entre os gêneros, os arcos dentários e as regiões bucais. A média de idade da amostra foi de 13,7 anos, sendo que 56% dos pacientes eram do gênero feminino e 44% do masculino. Do total analisada, apenas 18 pacientes (1,61%) apresentaram dentes supranumerários. Em relação ao gênero, verificou-se uma prevalência de 1,9% no gênero feminino, enquanto o gênero masculino apresentou prevalência de 1,2%. Na comparação entre os gêneros não se verificou diferença com significância estatística. No total foram constatados 24 dentes supranumerários, uma vez que existiram radiografias de pessoas com a presença de mais de um dente supranumerário. Destes 24 dentes, 16 estavam no arco superior e 8 no arco inferior. A partir da metodologia aplicada e dos resultados obtidos, pôde-se concluir que: a prevalência de dentes supranumerários foi de 1,61% dos indivíduos da amostra; não se pôde verificar diferença significante na prevalência de supranumerários entre os gêneros masculino e feminino; e a prevalência de dentes supranumerários foi estatisticamente semelhante para os arcos dentários superior e inferior, apesar de 66,7% deles terem sido localizados no arco superior

There are several tooth abnormalities in the dental arches, which can be in the number, shape or size of the teeth. The supernumerary teeth represent an important etiologic factor of malocclusion, quietly frequent. This study aimed to evaluate the prevalence of supernumerary teeth in the patients who has been orthodontic treated in the Graduation course of University of São Paulo City (UNICID). The sample, which consisted of 1117 panoramic radiographs of patients who have undergone orthodontic treatment, was studied on the distribution of the prevalence of supernumerary teeth gender, dental arches and mouth regions. The average age of the sample was 13.7 years, and 56% of patients were female and 44% male. Of the total analyzed, only 18 patients (1.61%) had supernumerary teeth. Regarding to gender, there was a prevalence of 1.9% among females, while males showed prevalence of 1.2%. In comparing genders, there was no statistically significant difference. A total of 24 supernumerary teeth were observed, once existed radiographs from people with more than one supernumerary tooth. Considering these 24 supernumerary teeth, 16 were located in the upper arch, while just 8 were in the lower arch. From the applied methodology and the results obtained, it could be concluded that: the prevalence of supernumerary teeth was 1.61% of individuals in the sample; There was not found significant differences in the prevalence of supernumerary between males and females; and prevalence of supernumerary teeth was statistically similar to the upper and lower dental arches, although 66.7% of them being located on the upper arch