Integrated Smart Gas Tracking Device with Artificially Tailored Selectivity for Real-Time Monitoring Food Freshness.

The real-time monitoring of food freshness in refrigerators is of significant importance in detecting potential food spoiling and preventing serious health issues. One method that is commonly reported and has received substantial attention is the discrimination of food freshness via the tracking of volatile molecules. Nevertheless, the ambient environment of low temperature (normally below 4 °C) and high humidity (90% R.H.), as well as poor selectivity in sensing gas species remain the challenge. In this research, an integrated smart gas-tracking device is designed and fabricated. By applying pump voltage on the yttria-stabilized zirconia (YSZ) membrane, the oxygen concentration in the testing chamber can be manually tailored. Due to the working principle of the sensor following the mixed potential behavior, distinct differences in sensitivity and selectivity are observed for the sensor that operated at different oxygen concentrations. Typically, the sensor gives satisfactory selectivity to H2S, NH3, and C2H5OH at the oxygen concentrations of 10%, 30%, and 40%, respectively. In addition, an acceptable response/recovery rate (within 24 s) is also confirmed. Finally, a refrigerator prototype that includes the smart gas sensor is built, and satisfactory performance in discriminating food freshness status of fresh or semi-fresh is verified for the proposed refrigerator prototype. In conclusion, these aforementioned promising results suggest that the proposed integrated smart gas sensor could be a potential candidate for alarming food spoilage.

Metal-organic frameworks based surface-enhanced Raman spectroscopy technique for ultra-sensitive biomedical trace detection.

Metal-organic frameworks (MOFs) have attracted widespread interest due to their unique and unprecedented advantages in microstructures and properties. Besides, surface-enhanced Raman scattering (SERS) technology has also rapidly developed into a powerful fingerprint spectroscopic technique that can provide rapid, non-invasive, non-destructive, and ultra-sensitive detection, even down to single molecular level. Consequently, a considerable amount of researchers combined MOFs with the SERS technique to further improve the sensing performance and broaden the applications of SERS substrates. Herein, representative synthesis strategies of MOFs to fabricate SERS-active substrates are summarized and their applications in ultra-sensitive biomedical trace detection are also reviewed. Besides, relative barriers, advantages, disadvantages, future trends, and prospects are particularly discussed to give guidance to relevant researchers.

Application of Zeeman graphite furnace atomic absorption spectrometry with high-frequency modulation polarization for the direct determination of aluminum, beryllium, cadmium, chromium, mercury, manganese, nickel, lead, and thallium in human blood.

Determination of aluminum (Al), beryllium (Be), cadmium (Cd), chromium (Cr), mercury (Hg), manganese (Mn), nickel (Ni), lead (Pb), and thallium (Tl) concentrations in human blood using high-frequency modulation polarization Zeeman graphite furnace atomic absorption spectrometry (GFAAS) was performed. No sample digestion was used in the current study. Blood samples were diluted with deionized water or 0.1 % (m/v) Triton X-100 solution for Tl. Dilution factors ranged from 1/5 per volume for Be and Tl to 1/20 per volume for Cd and Pb. For Tl, Cd, and Hg, noble metals (gold, platinum, rhodium, etc.) were applied as surface modifiers. To mitigate chloride interference, 2 % (m/v) solution of NH(4)NO(3) was used as matrix modifier for Tl and Ni assessment. The use of Pd(NO(3))(2) as oxidative modifier was necessary for blood Hg and Tl measurement. Validation of the methods was performed by analyzing two-level reference material Seronorm. The precision of the designed methods as relative SD was between 4 and 12 % (middle of a dynamic range) depending on the element. For additional validation, spiked blood samples were analyzed. Limits of detection (LoDs, 3σ, n = 10) for undiluted blood samples were 2.0 µg L(-1) for Al, 0.08 µg L(-1) for Be, 0.10 µg L(-1) for Cd, 2.2 µg L(-1) for Cr, 7 µg L(-1) for Hg, 0.4 µg L(-1) for Mn, 2.3 µg L(-1) for Ni, 3.4 µg L(-1) for Pb, and 0.5 µg L(-1) for Tl. The LoDs achieved allowed determination of Al, Cd, Cr, Mn, Ni, and Pb at both toxic and background levels. Be, Hg, and Tl could be reliably measured at toxic levels only. The methods developed are used for clinical diagnostics and biological monitoring of work-related exposure.

Trace element biomonitoring in hair of school children from a polluted area by sector field inductively coupled plasma mass spectrometry.

In the current study, a biomonitoring of 18 hair trace elements (Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Ni, Pb, Se, V, Zn, Ca, Na and P) in school children from Leningradskaya Oblast' is reported. A case group, residing in a proximity to the toxic waste disposal grounds (Krasniy Bor), has been assessed vs. controls from a non-urban settlement Seltso. In total, 166 hair samples were analysed using double focusing sector field inductively coupled plasma mass spectrometry after microwave-assisted sample digestion with nitric acid. For the determination of Ca, Na and P inductively coupled plasma optical emission spectrometry was employed. For the validation, a reference material and spiked hair samples were analysed. The data obtained was processed using parametric statistics and factor analysis. Determined concentrations of trace elements were in agreement with the previously published results on chemically polluted areas. In the case group, linear correlations between Al, Cr, Cu, Fe, Ni and V were observed. Also, these metals correlated to selenium hair content in the case group. Additionally, a correlation between hair Se and P was observed in the case subjects. Several gender differences in trace content were observed within each group. However, no age- or body index-related difference was found. The obtained results show that closely located waste disposal grounds intensifies trace element exposure in school children of Krasniy Bor. However, judging from rather high values for the controls, total environmental status of the region seems to be unstable, so additional monitoring and chemical safety measures are required.

Surface modification of microchip input reservoirs for pressure-induced sample injection into microreactors.

Optimization of geometry and surface modification of microchip input reservoirs were performed to achieve uninterferenced pressure-induced sample injection of multiple samples into microreactors using a single syringe pump. Nine samples of 3.5 microL were pipetted onto input reservoirs and loading of PCR mixture into 260 nL microreactors was achieved followed by successful PCR amplification, confirming that no cross-contamination occurs during injection.