RESUMEN
Excessive consumption of food rich in saturated fatty acids and carbohydrates can lead to metabolic disturbances and cardiovascular disease. Hyperlipidemia is a significant risk factor for acute cardiac events due to its association with oxidative stress. This leads to arterial wall remodeling, including an increase in the thickness of the intima media complex (IMT), and endothelial dysfunction leading to plaque formation. The decreased nitric oxide synthesis and accumulation of lipids in the wall result in a reduction in the vasodilating potential of the vessel. This study aimed to establish a clear relationship between markers of endothelial dysfunction and the activity of repair enzymes in cardiac tissue from a pig model of early atherosclerosis. The study was conducted on 28 female Polish Landrace pigs, weighing 40 kg (approximately 3.5 months old), which were divided into three groups. The control group (n = 11) was fed a standard, commercial, balanced diet (BDG) for 12 months. The second group (n = 9) was fed an unbalanced, high-calorie Western-type diet (UDG). The third group (n = 8) was fed a Western-type diet for nine months and then switched to a standard, balanced diet (regression group, RG). Control examinations, including blood and urine sampling, were conducted every three months under identical conditions with food restriction for 12 h and water restriction for four hours before general anesthesia. The study analyzed markers of oxidative stress formed during lipid peroxidation processes, including etheno DNA adducts, ADMA, and NEFA. These markers play a crucial role in reactive oxygen species analysis in ischemia-reperfusion and atherosclerosis in mammalian tissue. Essential genes involved in oxidative-stress-induced DNA demethylation like OGG1 (8-oxoguanine DNA glycosylase), MPG (N-Methylpurine DNA Glycosylase), TDG (Thymine-DNA glycosylase), APEX (apurinic/apirymidinic endodeoxyribonuclease 1), PTGS2 (prostaglandin-endoperoxide synthase 2), and ALOX (Arachidonate Lipoxygenase) were measured using the Real-Time RT-PCR method. The data suggest that high oxidative stress, as indicated by TBARS levels, is associated with high levels of DNA repair enzymes and depends on the expression of genes involved in the repair pathway. In all analyzed groups of heart tissue homogenates, the highest enzyme activity and gene expression values were observed for the OGG1 protein recognizing the modified 8oxoG. Conclusion: With the long-term use of an unbalanced diet, the levels of all DNA repair genes are increased, especially (significantly) Apex, Alox, and Ptgs, which strongly supports the hypothesis that an unbalanced diet induces oxidative stress that deregulates DNA repair mechanisms and may contribute to genome instability and tissue damage.
Asunto(s)
Aterosclerosis , ADN Glicosilasas , Timina ADN Glicosilasa , Femenino , Animales , Porcinos , ADN Glicosilasas/genética , ADN Glicosilasas/metabolismo , Reparación del ADN , Aterosclerosis/genética , Aterosclerosis/metabolismo , Estrés Oxidativo , Aductos de ADN , Timina ADN Glicosilasa/metabolismo , Daño del ADN , Mamíferos/metabolismoRESUMEN
In this article, we describe the antimicrobial properties of pristine anodised aluminium oxide matrices-the material many consider biologically inert. During a typical anodisation process, chromium and chlorine compounds are used for electropolishing and the removal of the first-step aluminium oxide. Matrices without the use of those harmful compounds were also fabricated and tested for comparison. The antibacterial tests were conducted on four strains of Escherichia coli: K12, R2, R3 and R4. The properties of the matrices were also compared to the three types of antibiotics: ciprofloxacin, bleomycin and cloxacillin using the Minimal Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC) tests. Moreover, DNA was isolated from the analysed bacteria which was additionally digested with formamidopyrimidine-DNA glycosylase (Fpg) protein from the group of repair glycosases. These enzymes are markers of modified oxidised bases in nucleic acids produced during oxidative stress in cells. Preliminary cellular studies, MIC and MBC tests and digestion with Fpg protein after modification of bacterial DNA suggest that these compounds may have greater potential as antibacterial agents than the aforementioned antibiotics. The described composites are highly specific for the analysed model Escherichia coli strains and may be used in the future as new substitutes for commonly used antibiotics in clinical and nosocomial infections in the progressing pandemic era. The results show much stronger antibacterial properties of the functionalised membranes on the action of bacterial membranes in comparison to the antibiotics in the Fpg digestion experiment. This is most likely due to the strong induction of oxidative stress in the cell through the breakdown of the analysed bacterial DNA.
Asunto(s)
Reparación del ADN , Proteínas de Escherichia coli , Proteínas de Escherichia coli/genética , Aluminio/farmacología , ADN Bacteriano , Óxidos , ADN-Formamidopirimidina Glicosilasa/genética , ADN-Formamidopirimidina Glicosilasa/metabolismo , Escherichia coli/metabolismo , Antibacterianos/farmacología , Óxido de AluminioRESUMEN
Four compounds with lactone moiety were synthesized from chalcone 1 in three- or four-step synthesis. γ-Bromo-δ-lactone 5 was the only product of bromolactonization of acid 4 whereas bromolactonization of ester 3, apart from lactone 5 also afforded its isomer 6 and two diastereoisomeric δ-hydroxy-γ-lactones 7 and 8. Lactone 8 was also obtained in 88% yield as a product of simultaneous dehalogenation and translactonization of γ-bromo-δ-lactone 5 by Penicillum frequentans AM 359. Chalcone-derived lactones 5-8 were subjected to the tests on antimicrobial activity and the results compared with activity of starting chalcone 1. Obtained lactones 5-8 in most cases limited the growth of tested bacterial and fungal strains. The highest activity was found for δ-hydroxy-γ-lactone 8 which completely inhibited the growth of Staphylococcus aureus, Fusarium graminearum, Aspergillus niger, and Alternaria sp. The introduction of lactone moiety into chalcone scaffold significantly improved antimicrobial activity of the compound: γ-bromo-δ-lactone 6 and δ-hydroxy-γ-lactone 8 were significantly stronger growth inhibitors of S. aureus and F. graminearum. In the case of the latter, a clear positive effect of the lactone function on the antifungal activity was also observed for γ-bromo-δ-lactone 5.
Asunto(s)
Antifúngicos , Chalconas , Antifúngicos/farmacología , Chalconas/farmacología , Lactonas/farmacología , Lactonas/metabolismo , Staphylococcus aureus/metabolismo , Antibacterianos/farmacología , BiotransformaciónRESUMEN
In this article, we describe the antimicrobial properties of a new composite based on anodic aluminium oxide (AAO) membranes containing propyl-copper-phosphonate units arranged at a predetermined density inside the AAO channels. The samples were prepared with four concentrations of copper ions and tested as antimicrobial drug on four different strains of Escherichia coli (K12, R2, R3 and R4). For comparison, the same strains were tested with three types of antibiotics using the minimal inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) tests. Moreover, DNA was isolated from the analysed bacteria which was additionally digested with formamidopyrimidine-DNA glycosylase (Fpg) protein from the group of repair glycosases. These enzymes are markers of modified oxidised bases in nucleic acids produced during oxidative stress in cells. Preliminary cellular studies, MIC and MBC tests and digestion with Fpg protein after modification of bacterial DNA suggest that these compounds may have greater potential as antibacterial agents than antibiotics such as ciprofloxacin, bleomycin and cloxacillin. The described composites are highly specific for the analysed model Escherichia coli strains and may be used in the future as new substitutes for commonly used antibiotics in clinical and nosocomial infections in the progressing pandemic era. The results show much stronger antibacterial properties of the functionalised membranes on the action of bacterial membranes in comparison to the antibiotics in the Fpg digestion experiment. This is most likely due to the strong induction of oxidative stress in the cell through the breakdown of the analysed bacterial DNA. We have also observed that the intermolecular distances between the functional units play an important role for the antimicrobial properties of the used material. Hence, we utilised the idea of the 2D solvent to tailor them.
Asunto(s)
Cobre , Proteínas de Escherichia coli , Óxido de Aluminio , Antibacterianos/farmacología , Bacterias , Cobre/farmacología , ADN Bacteriano , ADN-Formamidopirimidina Glicosilasa , Escherichia coli/genéticaRESUMEN
This research aimed to select yeast strains capable of the biotransformation of selected 2'-hydroxybromochalcones. Small-scale biotransformations were carried out using four substrates obtained by chemical synthesis (2'-hydroxy-2â³-bromochalcone, 2'-hydroxy-3â³-bromochalcone, 2'-hydroxy-4â³-bromochalcone and 2'-hydroxy-5'-bromochalcone) and eight strains of non-conventional yeasts. Screening allowed for the determination of the substrate specificity of selected microorganisms and the selection of biocatalysts that carried out the hydrogenation of tested compounds in the most effective way. It was found that the position of the bromine atom has a crucial influence on the degree of substrate conversion by the tested yeast strains. As a result of the biotransformation of the 2'-hydroxybromochalcones, the corresponding 2'-hydroxybromodihydrochalcones were obtained. The products obtained belong to the group of compounds with high potential as precursors of sweet substances.
Asunto(s)
Bromo , Saccharomyces cerevisiae , Biotransformación , Hidrogenación , Especificidad por SustratoRESUMEN
Designing catalyst systems based on transition metal ions and activators using the principles of green chemistry is a fundamental research goal of scientists due to the reduction of poisonous solvents, metal salts and organic ligands released into the environment. Urgent measures to reduce climate change are in line with the goals of sustainable development and the new restrictive laws ordained by the European Union. In this report, we attempted to use known oxovanadium(IV) green complex compounds with O, N and S donor ligands, i.e., [VO(TDA)phen] ⢠1.5 H2O (TDA = thiodiacetate), (phen = 1,10-phenanthroline), oxovanadium(IV) microclusters with 2-phenylpyridine (oxovanadium(IV) cage), [VOO(dipic)(2-phepyH)] ⢠H2O (dipic = pyridine-2,6-dicarboxylate anion), (2-phepyH = 2-phenylpyridine), [VO(dipic)(dmbipy)] ⢠2H2O (dmbipy = 4,4'-dimethoxy-2,2'-dipyridyl) and [VO(ODA)(bipy)] ⢠2 H2O (ODA = oxydiacetate), (bipy = 2,2'-bipyridine), as precatalysts in oligomerization reactions of 3-buten-2-ol, 2-propen-1-ol, 2-chloro-2-propen-1-ol and 2,3-dibromo-2-propen-1-ol. The precatalysts, in most cases, turned out to be highly active because the catalytic activity exceeded 1000 g mmol-1·h-1. In addition, the oligomers were characterized by Fourier-transform infrared spectroscopy (FTIR), matrix-assisted laser desorption/ionization (MALDI-TOF-MS), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques.
Asunto(s)
Alquenos , Fenantrolinas , Ligandos , Fenantrolinas/químicaRESUMEN
Oxidative stress plays an important role in the pathogenesis of many serious diseases, including cancer, atherosclerosis, coronary artery disease, Parkinson's disease, Alzheimer's disease, stroke and myocardial infarction. In the body's natural biochemical processes, harmful free radicals are formed, which can be removed with the help of appropriate enzymes, a balanced diet or the supply of synthetic antioxidant substances such as flavonoids, vitamins or anthocyanins to the body. Due to the growing demand for antioxidant substances, new complex compounds of transition metal ions with potential antioxidant activity are constantly being sought. In this study, four oxovanadium(IV) and dioxovanadium(V) dipicolinate (dipic) complexes with 1,10-phenanthroline (phen), 2,2'-bipyridyl (bipy) and the protonated form of 2-phenylpyridine (2-phephyH): (1) [VO(dipic)(H2O)2]·2 H2O, (2) [VO(dipic)(phen)]·3 H2O, (3) [VO(dipic)(bipy)]·H2O and (4) [VOO(dipic)](2-phepyH)·H2O were synthesized including one new complex, so far unknown and not described in the literature, i.e., [VOO(dipic)](2-phepyH)·H2O. The oxovanadium(IV) dipicolinate complexes with 1,10-phenanthroline and 2,2'-bipyridyl have been characterized by several physicochemical methods: NMR, MALDI-TOF-MS, IR, but new complex [VOO(dipic)](2-phepyH)·H2O has been examined by XRD to confirm its structure. The antioxidant activities of four complexes have been examined by the nitrotetrazolium blue (NBT) method towards superoxide anion. All complexes exhibit high reactivity with superoxide anion and [VOO(dipic)](2-phepyH)·H2O has higher antioxidant activity than L-ascorbic acid. Our studies confirmed that high basicity of the auxiliary ligand increases the reactivity of the complex with the superoxide radical.
Asunto(s)
Estrés Oxidativo/efectos de los fármacos , Óxidos/química , Ácidos Picolínicos/química , Uranio/química , Vanadatos/química , Antioxidantes/química , Antioxidantes/farmacología , Ácido Ascórbico/química , Complejos de Coordinación/química , Ligandos , Superóxidos/químicaRESUMEN
This publication presents the new trends and opportunities for further development of coordination compounds used in the chemical industry. The review describes the influence of various physicochemical factors regarding the coordination relationship (for example, steric hindrance, electron density, complex geometry, ligand), which condition technological processes. Coordination compounds are catalysts in technological processes used during organic synthesis, for example: Oxidation reactions, hydroformylation process, hydrogenation reaction, hydrocyanation process. In this article, we pointed out the possibilities of using complex compounds in catalysis, and we noticed what further research should be undertaken for this purpose.
Asunto(s)
Complejos de Coordinación/química , Iones/química , Metales/química , Catálisis , Industria Química , Ligandos , Oxidación-Reducción , Estereoisomerismo , Elementos de Transición/químicaRESUMEN
This paper presents the synthesis of γ -halo- δ -lactones, δ -iodo- γ -lactones and δ -hydroxy- γ -lactones from readily available organic substrates such as trans-crotonaldehyde and aryl bromides. Crystal structure analysis was carried out for lactones that were obtained in crystalline form. All halo- δ -lactones and δ -hydroxy- γ -lactones were highly cytotoxic against gastric cancer AGS cells with I C 50 values in the range of 0.0006-0.0044 mM. Some lactones showed high bactericidal activity against E. coli ATCC 8739 and S. aureus ATCC 65389, which reduced the number of CFU/mL by 70-83% and 87% respectively.
Asunto(s)
Antineoplásicos/química , Antineoplásicos/farmacología , Lactonas/química , Lactonas/farmacología , Animales , Antibacterianos/química , Antibacterianos/farmacología , Línea Celular , Relación Dosis-Respuesta a Droga , Humanos , Hidrólisis , Ratones , Modelos Moleculares , Conformación Molecular , Estructura Molecular , Relación Estructura-ActividadRESUMEN
In this work, fibre Bragg gratings (FBGs) were inscribed in two different undoped poly- (methyl methacrylate) (PMMA) polymer optical fibres (POFs) using different types of UV lasers and their inscription times, temperature and strain sensitivities are investigated. The POF Bragg gratings (POFBGs) were inscribed using two UV lasers: a continuous UV HeCd @325 nm laser and a pulsed UV KrF @248 nm laser. Two PMMA POFs are used in which the primary and secondary preforms (during the two-step drawing process) have a different thermal treatment. The PMMA POFs drawn in which the primary or secondary preform is not specifically pre-treated need longer inscription time than the fibres drawn where both preforms have been pre-annealed at 80 °C for 2 weeks. Using both UV lasers, for the latter fibre much less inscription time is needed compared to another homemade POF. The properties of a POF fabricated with both preforms thermally well annealed are different from those in which just one preform step process is thermally treated, with the first POFs being much less sensitive to thermal treatment. The influence of annealing on the strain and temperature sensitivities of the fibres prior to FBG inscription is also discussed, where it is observed that the fibre produced from a two-step drawing process with well-defined pre-annealing of both preforms did not produce any significant difference in sensitivity. The results indicate the impact of preform thermal pre-treatment before the PMMA POFs drawing, which can be an essential characteristic in the view of developing POF sensors technology.
RESUMEN
New glycidyl methacrylate copolymers containing different numbers of epoxy groups were synthesized and used to develop effective procedures for inulinase immobilization. The beneficial characteristics of the carriers included a high degree of crosslinking, stability at ambient temperature, an appropriate surface, and the presence of reactive epoxy groups. Some factors affecting the efficiency of immobilization of crude inulinase, including the kind and amount of carrier, the number of epoxy groups, as well as buffer pH and buffer concentration were examined. The yield of immobilization of this enzyme on the investigated type of microspheres was higher than on the commercial carrier, Eupergit(®) C. After immobilization, the optimum temperature for inulinase activity shifted from 55 to 45 °C, whereas the optimum pH = 5 remained unchanged. The basic parameters of inulin hydrolysis were examined, and the possibility of applying the obtained biocatalyst in continuous conditions was tested. Inulin at a concentration of 0.5% (w/v) was almost completely hydrolyzed to fructose (in a yield of 98 %) at a flow rate of 0.1 mL/min. A tenfold increase in the speed of flow resulted in an increase in the yield of oligosaccharides (DP2-DP6) up to ~41% in the overall hydrolysate, as analysed by HPLC-RID and LC-ESI/MS. These results indicate that two forms of inulinase, an exo- and an endo-acting enzyme, were immobilized on our carrier. The enzyme showed good operational stability in a packed column over 28 days. There were no significant decreases in the efficiency of continuous hydrolysis during this time (about 17.4% in comparison to its initial value).
Asunto(s)
Enzimas Inmovilizadas/química , Compuestos Epoxi/química , Proteínas Fúngicas/química , Glicósido Hidrolasas/química , Metacrilatos/química , Ácidos Polimetacrílicos/química , Aspergillus niger/enzimología , Biocatálisis , Estabilidad de Enzimas , Fructosa/química , Concentración de Iones de Hidrógeno , Hidrólisis , Inulina/química , Oligosacáridos/químicaRESUMEN
Synthesis of new podands from resorcinarene and diethylene glycols are reported. The binding properties of these podands with alkali metal cations was studied by means of ESI-MS. The experimental results for podands with long diethylene glycol arms show the stable inclusion complexes with one or two metal cations and high affinity for sodium and potassium ions. This podands under appropriate conditions can thus form a sufficiently long cavity to accommodate more than one metal ion inside without disturbance of the axial symmetry like an ion channel. Podand with shorter arms, obtained from ethylene glycol form complexes with 1:1 stoichiometry and also readily dimers or trimers. In the presence of alkali metal cations this podand selectively binds cesium ions. The significant affinity of synthesized podands for the biologically important alkali metal ions may affect living organisms. Antibacterial activities were tested with series of Gram-positive and Gram-negative bacteria.
RESUMEN
Large-scale cement production generates significant amounts of carbon dioxide from the breakdown of limestone, contributing to environmental pollution. Clean production of eco-friendly three-dimensional geopolymers can be used as environmentally friendly building materials. Replacing Portland cement with eco-friendly materials correlates with reduced energy consumption, costs, and negative environmental impact. In addition, geopolymer cement has above-average physical and chemical properties, which in many cases exceed conventional Portland cement. The literature review summarizes the latest research in the production of geopolymers following the principles of green chemistry and sustainable development goals. Examples of upcycling of construction waste, industrial waste (fly ash, silica fume, slag, tailing), demolition waste, agriculture solid waste (rice husk, palm oil), and mining waste into functional geopolymer materials will be discussed. Additionally, the review focused on innovative applications and physicochemical properties of functional geopolymer materials.
RESUMEN
Isocyanides and isocyanates are some of the most reactive compounds in organic chemistry, making them perceived as compounds with high potential for use in both the laboratory and industry. With their high reactivity also comes several disadvantages, most notably their potentially high toxicity. The following article is a collection of information on the toxic effects of the isocyanide group on the human body and the environment. Information on the mechanism of how these harmful substances affect living tissues and the environment, worldwide information on how to protect against these chemicals, current regulations, and exposure limits for specific countries is compiled. The latest research on the application uses of isocyanates and isocyanides is also outlined, as well as the latest safer and greener methods and techniques to work with these compounds. Additionally, the presented article can serve as a brief guide to the organic toxicity of a group of isocyanates and isocyanates.
Asunto(s)
Cianuros , Isocianatos , Isocianatos/toxicidad , Cianuros/química , Humanos , Contaminantes Ambientales/toxicidad , Exposición a Riesgos AmbientalesRESUMEN
There are few literature reports on using precatalysts based on ruthenium(II/III) ions in the polymerization of olefins. Therefore, a new coordination compound was designed based on ruthenium(III) ion and 2-phenylpyridine. The resulting monocrystal was characterized by X-ray diffraction (XRD), solid-state (photo)IR spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The new ruthenium(III) complex compound was used as a precatalyst in the oligomerization reactions of ethylene, 2-propen-1-ol, 2-chloro-2-propen-1-ol, 3-butene-2-ol and 2,3-dibromo-2-propen-1-ol with methylaluminoxane and ethylaluminium dichloride as activators. The catalytic activity of the newly discovered ruthenium(III) complex compound ranges from 159.5 (for 2-chloro-2-propen-1-ol) to 755.6 (for ethylene) g mmol-1 h-1 bar-1, indicating that it is a chemical compound with high catalytic activity. In addition, the oligomerization reaction products were subjected to physicochemical characterization, using BET (Brunauer-Emmett-Teller isotherm), mass spectrometry (MALDI-TOF-MS), Fourier transform infrared (FT-IR) spectroscopy, NMR, TGA, differential scanning calorimetry (DSC), and the morphology of the porous polymeric materials was investigated by SEM. The distinguishing feature of the obtained precatalyst is its high catalytic activity under mild reaction conditions, a rare phenomenon. Compared with other precatalysts, it is the most active ruthenium(II/III) ion-based catalytic material used in oligo- and polymerization reactions of ethylene.
RESUMEN
Correction for 'Porous oligomeric materials synthesised using a new, highly active precatalyst based on ruthenium(III) and 2-phenylpyridine' by Kacper Poblocki et al., Dalton Trans., 2024, 53, 4194-4203, https://doi.org/10.1039/D3DT04091G.
RESUMEN
In this paper, a synthesis of two innovative coordination compounds, based on chromium(III) and cobalt(II) ions with N,O-donor ligands (nitrilotriacetate, dipicolinate) and 4-acetylpyridine, is reported. The obtained metal-organic compounds were structurally characterized using the single-crystal X-ray diffraction (XRD) method. The well-defined chromium(III) and cobalt(II) complexes were used as precatalysts in the oligomerization reaction of 2-chloro-2-propen-1-ol and 2-propen-1-ol with methylaluminoxane (MMAO) as an activator. The products of the oligomerization reaction were subjected to full physicochemical characteristics, i.e., time-of-flight mass spectrometry (MALDI-TOF-MS), TGA, and differential scanning calorimetry (DSC) methods. The catalytic activity of the precatalysts in both reactions was calculated and compared with other catalysts known in the literature.
RESUMEN
The new actual scientific direction is in the development of different nanocomposites and the study of their medical-biological, physicochemical, and physicomechanical properties. One way to expand the functionality of nanocomposites and nanomaterials is to introduce carbon nanostructures into the polymer matrix. This study presents the properties of unsaturated polyester resins (Estromal, LERG S.A.) based on PET recyclate with multi-walled carbon nanotubes (MWCNTs): their mechanical and thermomechanical characteristics, resistance to ultraviolet radiation (UV-vis), and chemical resistance properties. The properties of the obtained materials were characterized using physical-chemical research methods. The changes in the properties of the composites for MWCNT content of 0.1, 0.3, and 0.5 wt % were determined. The results showed positive influences on the thermomechanical and mechanical properties of nanocomposites without significant deterioration of their gloss. Too much CNT added to the resin leads to heterogeneity of the composite structure.
RESUMEN
When designing products that are made of composite materials and that contain natural fillers, it is particularly important to consider the long-term exposure of these materials to caustic liquids and substances (concentrated acids, bases), and to ensure that these products meet strict requirements for reliability and operational safety. This study investigated the effects of different solvents on the mass, mechanical, thermal, surface, and structural properties of polymer composites containing natural fillers in the form of pumpkin seed hulls. Experiments were conducted using four different filler contents (5, 10, 15, and 20 wt%) and grain sizes ranging from 0.2 to 0.4 mm and 0.6 to 0.8 mm. Hybrid injection-moulded pieces were immersed in distilled water (H2O), 1% NaOH solution, acetone (C3H6O), and toluene (C7H8) for 84 days. After that, their mechanical and thermal properties as well as their structure geometries were analysed statistically. Changes in the properties of the tested composite materials were assessed depending on the solvent type, and the statistical significance of these changes were determined. The results showed that the nature of degradation depended on the applied solvent type. It was observed that the polymer matrix of the toluene-immersed samples absorbed the liquid to a significant extent first and then underwent a gradual degradation with time. In contrast, the samples immersed in water showed a slight increase in their mass. It was found that all tested properties of the composite samples deteriorated irrespective of the solvent type.
RESUMEN
This study compares the degradation process of unsaturated polyester resin (UPR) and vinyl ester resin (VER) and their biocomposites with kraft lignin. In order to study their degradation, accelerated aging, immersion in different solvents, microwave radiation and high temperature were applied. The results show that, depending on the conditions, the degradation assumes a different course. The VER resin is more chemically resistant than the UPR resin. In the case of the composites immersed in an aggressive solvent (acetone), it can be observed that the polymer matrix is degraded, whereas in water only a small increase of weight takes place. Immersion in NaOH initiates the degradation process consisting in the hydrolysis of ester bonds, which are especially observed for pure resins. Under the influence of UV radiation and microwaves, the resins are additionally cross-linked. Thermogravimetric analysis shows that in the case of composites heated to 1000 °C, a residual mass remains, which is carbonized with lignin. In turn, composites treated with microwaves lost weight.