A structural explanation for the mechanism and specificity of plant branching enzymes I and IIb.

Branching enzymes (BEs) are essential in the biosynthesis of starch and glycogen and play critical roles in determining the fine structure of these polymers. The substrates of these BEs are long carbohydrate chains that interact with these enzymes via multiple binding sites on the enzyme's surface. By controlling the branched-chain length distribution, BEs can mediate the physiological properties of starch and glycogen moieties; however, the mechanism and structural determinants of this specificity remain mysterious. In this study, we identify a large dodecaose binding surface on rice BE I (BEI) that reaches from the outside of the active site to the active site of the enzyme. Mutagenesis activity assays confirm the importance of this binding site in enzyme catalysis, from which we conclude that it is likely the acceptor chain binding site. Comparison of the structures of BE from Cyanothece and BE1 from rice allowed us to model the location of the donor-binding site. We also identified two loops that likely interact with the donor chain and whose sequences diverge between plant BE1, which tends to transfer longer chains, and BEIIb, which transfers exclusively much shorter chains. When the sequences of these loops were swapped with the BEIIb sequence, rice BE1 also became a short-chain transferring enzyme, demonstrating the key role these loops play in specificity. Taken together, these results provide a more complete picture of the structure, selectivity, and activity of BEs.

Light controlled reversible Michael addition of cysteine: a new tool for dynamic site-specific labeling of proteins.

Cysteine-based Michael addition is a widely employed strategy for covalent conjugation of proteins, peptides, and drugs. The covalent reaction is irreversible in most cases, leading to a lack of control over the process. Utilizing spectroscopic analyses along with X-ray crystallographic studies, we demonstrate Michael addition of an engineered cysteine residue in human Cellular Retinol Binding Protein II (hCRBPII) with a coumarin analog that creates a non-fluorescent complex. UV-illumination reverses the conjugation, yielding a fluorescent species, presumably through a retro-Michael process. This series of events can be repeated between a bound and non-bound form of the cysteine reversibly, resulting in the ON-OFF control of fluorescence. The details of the mechanism of photoswitching was illuminated by recapitulation of the process in light irradiated single crystals, confirming the mechanism at atomic resolution.

The Structure of Maltooctaose-Bound Escherichia coli Branching Enzyme Suggests a Mechanism for Donor Chain Specificity.

Glycogen is the primary storage polysaccharide in bacteria and animals. It is a glucose polymer linked by α-1,4 glucose linkages and branched via α-1,6-linkages, with the latter reaction catalyzed by branching enzymes. Both the length and dispensation of these branches are critical in defining the structure, density, and relative bioavailability of the storage polysaccharide. Key to this is the specificity of branching enzymes because they define branch length. Herein, we report the crystal structure of the maltooctaose-bound branching enzyme from the enterobacteria E. coli. The structure identifies three new malto-oligosaccharide binding sites and confirms oligosaccharide binding in seven others, bringing the total number of oligosaccharide binding sites to twelve. In addition, the structure shows distinctly different binding in previously identified site I, with a substantially longer glucan chain ordered in the binding site. Using the donor oligosaccharide chain-bound Cyanothece branching enzyme structure as a guide, binding site I was identified as the likely binding surface for the extended donor chains that the E. coli branching enzyme is known to transfer. Furthermore, the structure suggests that analogous loops in branching enzymes from a diversity of organisms are responsible for branch chain length specificity. Together, these results suggest a possible mechanism for transfer chain specificity involving some of these surface binding sites.

A hydrophobic residue stabilizes dimers of regulatory ACT-like domains in plant basic helix-loop-helix transcription factors.

About a third of the plant basic helix-loop-helix (bHLH) transcription factors harbor a C-terminal aspartate kinase, chorismate mutase, and TyrA (ACT)-like domain, which was originally identified in the maize R regulator of anthocyanin biosynthesis, where it modulates the ability of the bHLH to dimerize and bind DNA. Characterization of other bHLH ACT-like domains, such as the one in the Arabidopsis R ortholog, GL3, has not definitively confirmed dimerization, raising the question of the overall role of this potential regulatory domain. To learn more, we compared the dimerization of the ACT-like domains of R (RACT) and GL3 (GL3ACT). We show that RACT dimerizes with a dissociation constant around 100 nM, over an order of magnitude stronger than GL3ACT. Structural predictions combined with mutational analyses demonstrated that V568, located in a hydrophobic pocket in RACT, is important: when mutated to the Ser residue present in GL3ACT, dimerization affinity dropped by almost an order of magnitude. The converse S595V mutation in GL3ACT significantly increased the dimerization strength. We cloned and assayed dimerization for all identified maize ACT-like domains and determined that 12 of 42 formed heterodimers in yeast two-hybrid assays, irrespective of whether they harbored V568, which was often replaced by other aliphatic amino acids. Moreover, we determined that the presence of polar residues at that position occurs only in a small subset of anthocyanin regulators. The combined results provide new insights into possibly regulatory mechanisms and suggest that many of the other plant ACT-like domains associate to modulate fundamental cellular processes.

Cg10062 Catalysis Forges a Link between Acetylenecarboxylic Acid and Bacterial Metabolism.

The reliance of biocatalysis on plant-derived carbon for the synthesis of fuels and chemicals places it in direct competition with food production for resources. A potential solution to this problem is development of a metabolic link between alternative carbon sources and bacterial metabolism. Acetylenecarboxylic acid, which can be synthesized from methane and carbon dioxide, could enable this connection. It was previously shown that the enzyme Cg10062 catalyzes hydration of acetylenecarboxylate to afford malonate semialdehyde. Subsequent hydration-dependent decarboxylation to form acetaldehyde (81%), which was also observed, limits its biocatalytic usefulness. Several Cg10062 variants including E114Q and E114D do not catalyze decarboxylation and provide malonate semialdehyde as the sole product, albeit with substantially reduced catalytic activity. To identify an efficient enzyme capable of catalyzing acetylenecarboxylate hydration without decarboxylation, we undertook a mechanistic investigation of Cg10062 using mutagenesis, kinetic characterization, and X-ray crystallography. Cg10062 is a member of the tautomerase superfamily of enzymes, characterized by their ß-α-ß protein fold and an N-terminal proline residue situated at the center of the enzyme active site. Along with Pro-1, five additional active site residues (His-28, Arg-70, Arg-73, Tyr-103, and Glu-114) are required for Cg10062 activity. Incubation of crystals of four catalytically slow variants of Cg10062 with acetylenecarboxylate resulted in atomic resolution structures of Pro-1 bound to a complete set of intermediates, fully elaborating the detailed mechanism of the enzyme and establishing the process to involve covalent catalysis. Further, the intermediate-bound E114D structure explains the mechanism governing decarboxylation suppression. Together, these studies provide the most detailed picture of the catalytic mechanism of a tautomerase enzyme to date.

Design of Large Stokes Shift Fluorescent Proteins Based on Excited State Proton Transfer of an Engineered Photobase.

The incredible potential for fluorescent proteins to revolutionize biology has inspired the development of a variety of design strategies to address an equally broad range of photophysical characteristics, depending on potential applications. Of these, fluorescent proteins that simultaneously exhibit high quantum yield, red-shifted emission, and wide separation between excitation and emission wavelengths (Large Stokes Shift, LSS) are rare. The pursuit of LSS systems has led to the formation of a complex, obtained from the marriage of a rationally engineered protein (human cellular retinol binding protein II, hCRBPII) and different fluorogenic molecules, capable of supporting photobase activity. The large increase in basicity upon photoexcitation leads to protonation of the fluorophore in the excited state, dramatically red-shifting its emission, leading to an LSS protein/fluorophore complex. Essential for selective photobase activity is the intimate involvement of the target protein structure and sequence that enables Excited State Proton Transfer (ESPT). The potential power and usefulness of the strategy was demonstrated in live cell imaging of human cell lines.

Control of Protonated Schiff Base Excited State Decay within Visual Protein Mimics: A Unified Model for Retinal Chromophores.

Artificial biomimetic chromophore-protein complexes inspired by natural visual pigments can feature color tunability across the full visible spectrum. However, control of excited state dynamics of the retinal chromophore, which is of paramount importance for technological applications, is lacking due to its complex and subtle photophysics/photochemistry. Here, ultrafast transient absorption spectroscopy and quantum mechanics/molecular mechanics simulations are combined for the study of highly tunable rhodopsin mimics, as compared to retinal chromophores in solution. Conical intersections and transient fluorescent intermediates are identified with atomistic resolution, providing unambiguous assignment of their ultrafast excited state absorption features. The results point out that the electrostatic environment of the chromophore, modified by protein point mutations, affects its excited state properties allowing control of its photophysics with same power of chemical modifications of the chromophore. The complex nature of such fine control is a fundamental knowledge for the design of bio-mimetic opto-electronic and photonic devices.

Human Cellular Retinol Binding Protein II Forms a Domain-Swapped Trimer Representing a Novel Fold and a New Template for Protein Engineering.

Domain-swapping is a mechanism for evolving new protein structure from extant scaffolds, and has been an efficient protein-engineering strategy for tailoring functional diversity. However, domain swapping can only be exploited if it can be controlled, especially in cases where various folds can coexist. Herein, we describe the structure of a domain-swapped trimer of the iLBP family member hCRBPII, and suggest a mechanism for domain-swapped trimerization. It is further shown that domain-swapped trimerization can be favored by strategic installation of a disulfide bond, thus demonstrating a strategy for fold control. We further show the domain-swapped trimer to be a useful protein design template by installing a high-affinity metal binding site through the introduction of a single mutation, taking advantage of its threefold symmetry. Together, these studies show how nature can promote oligomerization, stabilize a specific oligomer, and generate new function with minimal changes to the protein sequence.

Engineering of a Red Fluorogenic Protein/Merocyanine Complex for Live-Cell Imaging.

A reengineered human cellular retinol binding protein II (hCRBPII), a 15-kDa protein belonging to the intracellular lipid binding protein (iLBP) family, generates a highly fluorescent red pigment through the covalent linkage of a merocyanine aldehyde to an active site lysine residue. The complex exhibits "turn-on" fluorescence, due to a weakly fluorescent aldehyde that "lights up" with subsequent formation of a strongly fluorescent merocyanine dye within the binding pocket of the protein. Cellular penetration of merocyanine is rapid, and fluorophore maturation is nearly instantaneous. The hCRBPII/merocyanine complex displays high quantum yield, low cytotoxicity, specificity in labeling organelles, and compatibility in both cancer cell lines and yeast cells. The hCRBPII/merocyanine tag is brighter than most common red fluorescent proteins.

Mimicking Microbial Rhodopsin Isomerization in a Single Crystal.

Bacteriorhodopsin represents the simplest, and possibly most abundant, phototropic system requiring only a retinal-bound transmembrane protein to convert photons of light to an energy-generating proton gradient. The creation and interrogation of a microbial rhodopsin mimic, based on an orthogonal protein system, would illuminate the design elements required to generate new photoactive proteins with novel function. We describe a microbial rhodopsin mimic, created using a small soluble protein as a template, that specifically photoisomerizes all- trans to 13- cis retinal followed by thermal relaxation to the all- trans isomer, mimicking the bacteriorhodopsin photocycle, in a single crystal. The key element for selective isomerization is a tuned steric interaction between the chromophore and protein, similar to that seen in the microbial rhodopsins. It is further demonstrated that a single mutation converts the system to a protein photoswitch without chromophore photoisomerization or conformational change.

Engineering the hCRBPII Domain-Swapped Dimer into a New Class of Protein Switches.

Protein conformational switches or allosteric proteins play a key role in the regulation of many essential biological pathways. Nonetheless, the implementation of protein conformational switches in protein design applications has proven challenging, with only a few known examples that are not derivatives of naturally occurring allosteric systems. We have discovered that the domain-swapped (DS) dimer of hCRBPII undergoes a large and robust conformational change upon retinal binding, making it a potentially powerful template for the design of protein conformational switches. Atomic resolution structures of the apo- and holo-forms illuminate a simple, mechanical movement involving sterically driven torsion angle flipping of two residues that drive the motion. We further demonstrate that the conformational "readout" can be altered by addition of cross-domain disulfide bonds, also visualized at atomic resolution. Finally, as a proof of principle, we have created an allosteric metal binding site in the DS dimer, where ligand binding results in a reversible 5-fold loss of metal binding affinity. The high resolution structure of the metal-bound variant illustrates a well-formed metal binding site at the interface of the two domains of the DS dimer and confirms the design strategy for allosteric regulation.

Free-Energy-Based Protein Design: Re-Engineering Cellular Retinoic Acid Binding Protein II Assisted by the Moveable-Type Approach.

How to fine-tune the binding free energy of a small-molecule to a receptor site by altering the amino acid residue composition is a key question in protein engineering. Indeed, the ultimate solution to this problem, to chemical accuracy (±1 kcal/mol), will result in profound and wide-ranging applications in protein design. Numerous tools have been developed to address this question using knowledge-based models to more computationally intensive molecular dynamics simulations-based free energy calculations, but while some success has been achieved there remains room for improvement in terms of overall accuracy and in the speed of the methodology. Here we report a fast, knowledge-based movable-type (MT)-based approach to estimate the absolute and relative free energy of binding as influenced by mutations in a small-molecule binding site in a protein. We retrospectively validate our approach using mutagenesis data for retinoic acid binding to the Cellular Retinoic Acid Binding Protein II (CRABPII) system and then make prospective predictions that are borne out experimentally. The overall performance of our approach is supported by its success in identifying mutants that show high or even sub-nano-molar binding affinities of retinoic acid to the CRABPII system.

A Genetically Encoded Ratiometric pH Probe: Wavelength Regulation-Inspired Design of pH Indicators.

Mutants of human cellular retinol-binding protein II (hCRBPII) were engineered to bind a julolidine retinal analogue for the purpose of developing a ratiometric pH sensor. The design relied on the electrostatic influence of a titratable amino acid side chain, which affects the absorption and, thus, the emission of the protein/fluorophore complex. The ratio of emissions obtained at two excitation wavelengths that correspond to the absorption of the two forms of the protein/fluorophore complex, leads to a concentration-independent measure of pH.

A Near-Infrared Photoswitchable Protein-Fluorophore Tag for No-Wash Live Cell Imaging.

FR-1V, a fluorene-based aldehydic chromophore, binds its target protein as an imine to yield a highly bathochromic pigment, CF-2, a prototypic protein-dye tagging system whose NIR emission can be spatiotemporally switched ON by rapid UV-light activation. This is achieved through photoisomerization of the imine and its subsequent protonation. We demonstrate a no-wash protocol for live cell imaging of subcellular compartments in a variety of mammalian cell lines with minimal fluorescence background.

Ultrafast Dynamics of a "Super" Photobase.

Molecular reactivity can change dramatically with the absorption of a photon due to the difference of the electronic configurations between the excited and ground states. Here we report on the discovery of a modular system (Schiff base formed from an aldehyde and an amine) that upon photoexcitation yields a more basic imine capable of intermolecular proton transfer from protic solvents. Ultrafast dynamics of the excited state conjugated Schiff base reveals the pathway for proton transfer, culminating in a 14-unit increase in pKa to give the excited state pKa * >20 in ethanol.

A Photoisomerizing Rhodopsin Mimic Observed at Atomic Resolution.

The members of the rhodopsin family of proteins are involved in many essential light-dependent processes in biology. Specific photoisomerization of the protein-bound retinylidene PSB at a specified wavelength range of light is at the heart of all of these systems. Nonetheless, it has been difficult to reproduce in an engineered system. We have developed rhodopsin mimics, using intracellular lipid binding protein family members as scaffolds, to study fundamental aspects of protein/chromophore interactions. Herein we describe a system that specifically isomerizes the retinylidene protonated Schiff base both thermally and photochemically. This isomerization has been characterized at atomic resolution by quantitatively interconverting the isomers in the crystal both thermally and photochemically. This event is accompanied by a large pKa change of the imine similar to the pKa changes observed in bacteriorhodopsin and visual opsins during isomerization.

Light-Activated Reversible Imine Isomerization: Towards a Photochromic Protein Switch.

Mutants of cellular retinoic acid-binding protein II (CRABPII), engineered to bind all-trans-retinal as an iminium species, demonstrate photochromism upon irradiation with light at different wavelengths. UV light irradiation populates the cis-imine geometry, which has a high pKa , leading to protonation of the imine and subsequent "turn-on" of color. Yellow light irradiation yields the trans-imine isomer, which has a depressed pKa , leading to loss of color because the imine is not protonated. The protein-bound retinylidene chromophore undergoes photoinduced reversible interconversion between the colored and uncolored species, with excellent fatigue resistance.

The photochemical determinants of color vision: revealing how opsins tune their chromophore's absorption wavelength.

The evolution of a variety of important chromophore-dependent biological processes, including microbial light sensing and mammalian color vision, relies on protein modifications that alter the spectral characteristics of a bound chromophore. Three different color opsins share the same chromophore, but have three distinct absorptions that together cover the entire visible spectrum, giving rise to trichromatic vision. The influence of opsins on the absorbance of the chromophore has been studied through methods such as model compounds, opsin mutagenesis, and computational modeling. The recent development of rhodopsin mimic that uses small soluble proteins to recapitulate the binding and wavelength tuning of the native opsins provides a new platform for studying protein-regulated spectral tuning. The ability to achieve far-red shifted absorption in the rhodopsin mimic system was attributed to a combination of the lack of a counteranion proximal to the iminium, and a uniformly neutral electrostatic environment surrounding the chromophore.

Crystal Structures of Escherichia coli Branching Enzyme in Complex with Linear Oligosaccharides.

Branching enzyme is responsible for all branching of glycogen and starch. It is an unusual member of the α-amylase family because it has both α-1,4-amylase activity and α-1,6-transferase activity [Drummond, G. S., et al. (1972) Eur. J. Biochem. 26, 168-176]. It also does not react with shorter glucans, though it will bind much longer substrates and substrate mimics [Binderup, K., et al. (2002) Arch. Biochem. Biophys. 397, 279-285]. In an effort to better understand how branching enzyme interacts with its polymeric substrate, we have determined the structure of Δ112 Escherichia coli branching enzyme bound to maltoheptaose and maltohexaose. Together, these structures define six distinct oligosaccharide binding sites on the surface of E. coli branching enzyme. Most of these binding sites surround the edge of the ß-barrel domain and are quite far from the active site. Surprisingly, there is no evidence of oligosaccharide binding in the active site of the enzyme. The closest bound oligosaccharide resides almost 18 Å from the active site. Mutations to conserved residues in binding sites I and VI had a debilitating effect on the activity of the enzyme.

Kinetically and Crystallographically Guided Mutations of a Benzoate CoA Ligase (BadA) Elucidate Mechanism and Expand Substrate Permissivity.

A benzoate CoA ligase (BadA), isolated from the bacterium Rhodopseudomonas palustris, catalyzes the conversion of benzoate to benzoyl CoA on the catabolic pathway of aromatic carboxylic acids. Herein, apparent Michaelis constants K(app)cat and K(app)M were determined for an expanded array of 31 substrates chosen to systematically probe the active site architecture of the enzyme and provide a baseline for expansion of wild-type substrate specificity. Acyl CoA products were observed for 25 of the 31 substrates; in general, BadA converted ortho-substituted substrates better than the corresponding meta and para regioisomers, and the turnover number was more affected by steric rather than electronic effects. The kinetic data are interpreted in relation to six crystal structures of BadA in complex with several substrates and a benzoyl-AMP reaction intermediate. In contrast to other known natural substrate-bound benzoate ligase structures, all substrate-bound BadA structures adopted the thiolation conformation instead of the adenylation conformation. We also observed all the aryl carboxylates to be uniquely oriented within the active site, relative to other structures. Together, the kinetics and structural data suggested a mechanism that involves substrate binding in the thiolation conformation, followed by substrate rotation to an active orientation upon the transition to the adenylation conformation. On the basis of this hypothesis and the structural data, sterically demanding active site residues were mutated, and the substrate specificity was expanded substantially versus that of BadA. Novel activities were seen for substrates with larger substituents, including phenyl acetate. Additionally, the mutant Lys427Ala identified this nonconserved residue as essential for the thiolation step of BadA, but not adenylation. These variously acylated CoAs can serve as novel substrates of acyl CoA-dependent acyltransferases in coupled enzyme assays to produce analogues of bioactive natural products.