RESUMEN
Homemade explosives, such as peroxides, nitrates, and chlorates, are increasingly abused by terrorists, criminals, and amateur chemists. The starting materials are easily accessible and instructions on how to make the explosives are described on the Internet. Safety considerations raise the need to detect these substances quickly and in low concentrations using simple methods. Conventional methods for the detection of these substances require sophisticated, electrically operated, analytical equipment. The simpler chemical detection methods are multistep and require several chemicals. We have developed a simple, one-step method that works similarly to a pH test strip in terms of handling. The analytical reaction is based on an acid-catalyzed oxidation of an electron-rich porphyrin to an unusually stable radical cation and dication. The detection limit for the peroxide-based explosive triacetone triperoxide (TATP), which is very frequently used by terrorists, is 40 ng and thus low enough to detect the substance without direct contact via the gas phase. It is sufficient to bring the stick close to the substance to observe a color change from red to green. Nitrates and chlorates, such as ammonium nitrate, urea nitrate, or potassium chlorate, are detected by direct contact with a sensitivity of 85-350 ng. A color change from red to dark brown is observed. The test thus detects all homemade explosives and distinguishes between the extremely impact-, shock-, and friction-sensitive peroxides and the less sensitive nitrates and chlorates by color change of a simple test strip.
RESUMEN
Herein, we present a convenient synthesis for symmetrical and mixed substituted tris(acyl)phosphines (TAPs) starting from red phosphorus. All TAPs exhibit a phosphaalkene-acylphosphine equilibrium, which was investigated in detail by variable-temperature (VT) NMR spectroscopy supported by density-functional theory (DFT) calculations. Depending on the substituents, two phosphaalkene derivatives and ten acylphosphine derivatives could be isolated. NMR spectroscopy and single-crystal X-ray crystallography enabled a clear structural assignment of these compounds. Oxidation of selected TAPs led to the formation of the corresponding tris(acyl)phosphine oxides (TAPOs). Furthermore, their spectroscopic properties as well as their photochemistry was investigated. Especially, the TAPO compounds were evaluated for their suitability as photoinitiators by CIDNP spectroscopy, photobleaching measurements and by storage stability tests.
RESUMEN
Invited for the cover of this issue are the groups of M. Haas, G. Gescheidt and H. Grützmacher from the Graz University of Technology and the ETH Zürich. The image depicts a phosphorus mine, where the workers are acid chlorides using their shovels and red phosphorus to provide the chemicals necessary to produce novel reagents. Read the full text of the article at 10.1002/chem.202302535.
RESUMEN
Azo compounds are efficient electron acceptors. Upon one-electron reduction they generally isomerize forming the thermodynamically most stable radical anion. Herein we show that the size of the central ring in 1,2-diazocines and diazonines has a ruling influence on the configuration of the one-electron reduced species. Markedly, diazonines, which bear a central nine membered heterocycle, show light-induced E/Z isomerization, but retain the configuration of the diazene N=N moiety upon one-electron reduction. Accordingly, E/Z isomerization is not induced by reduction.
Asunto(s)
Compuestos Azo , Electrones , OxidantesRESUMEN
In situ IR detection of photoreactions induced by the light of LEDs at appropriate wavelengths provides a simple, cost-effective, and versatile method to get insight into mechanistic details. In particular, conversions of functional groups can be selectively followed. Overlapping UV-Vis bands or fluorescence from the reactants and products and the incident light do not obstruct IR detection. Compared with in situ photo-NMR, our setup does not require tedious sample preparation (optical fibers) and offers a selective detection of reactions, even at positions where 1H-NMR lines overlap or 1H resonances are not clear-cut. We illustrate the applicability of our setup following the photo-Brook rearrangement of (adamant-1-yl-carbonyl)-tris(trimethylsilyl)silane, address photo-induced α-bond cleavage (1-hydroxycyclohexyl phenyl ketone), study photoreduction using tris(bipyridine)ruthenium(II), investigate photo-oxygenation of double bonds with molecular oxygen and the fluorescent 2,4,6-triphenylpyrylium photocatalyst, and address photo-polymerization. With the LED/FT-IR combination, reactions can be qualitatively followed in fluid solution, (highly) viscous environments, and in the solid state. Viscosity changes during the reaction (e.g., during a polymerization) do not obstruct the method.
RESUMEN
New methoxylated oligosilyl-substituted metallocenes were synthesized by the reaction of two oligosilanides with different metallocene dichlorides (M = Ti, Zr, and Hf). The first investigated tris(trimethoxysilyl)silanide [(MeO)3Si]3SiK (1) underwent a selective monosubstitution to the respective oligosilyl-decorated metallocenes [(MeO)3Si]3SiMClCp2 (2-4). Surprisingly, the attempted disilylation with this silanide was not possible. However, in the case of titanocene dichloride, a stable radical [(MeO)3Si]3SiTiCp2 (5) was formed. The unsuccessful isolation of bisilylated metallocenes encouraged us to investigate the reactivity of another silanide. Therefore, we synthesized a hitherto unknown disilanide K[(MeO)3Si]2Si(SiMe2)2Si[(MeO)3Si]2K (8), which was accessible in good yields. The reaction of compound 8 and different metallocene dichlorides (M = Ti, Zr, and Hf) gave rise to the formation of heterocyclic compounds 9-11 in good yields.
RESUMEN
We have synthesized the first isolable geminal bisenolates L2 K2 Ge[(CO)R]2 (R=2,4,6-trimethylphenyl (2 a,b), L=THF for (2 a) or [18]-crown-6 for (2 b)), a new synthon for the synthesis of organometallic reagents. The formation of these derivatives was confirmed by NMR spectroscopy and X-ray crystallographic analysis. The UV/Vis spectra of these anions show three distinct bands, which were assigned by DFT calculations. The efficiency of 2 a,b to serve as new building block in macromolecular chemistry is demonstrated by the reactions with two different types of electrophiles (acid chlorides and alkyl halides). In all cases the salt metathesis reaction gave rise to novel Ge-based photoinitiators in good yields.
RESUMEN
N-Demethylation of oxycodone is one of the key steps in the synthesis of important opioid antagonists like naloxone or analgesics like nalbuphine. The reaction is typically carried out using stoichiometric amounts of toxic and corrosive reagents. Herein, we present a green and scalable organophotocatalytic procedure that accomplishes the N-demethylation step using molecular oxygen as the terminal oxidant and an organic dye (rose bengal) as an effective photocatalyst. Optimization of the reaction conditions under continuous flow conditions using visible-light irradiation led to an efficient, reliable, and scalable process, producing noroxycodone hydrochloride in high isolated yield and purity after a simple workup.
Asunto(s)
Analgésicos/química , Morfinanos/química , Oxicodona/química , Desmetilación , HumanosRESUMEN
A continuous-flow process for the in situ on-demand generation of cyanogen bromide (BrCN) from bromine and potassium cyanide that makes use of membrane-separation technology is described. In order to circumvent the handling, storage, and transportation of elemental bromine, a continuous bromine generator using bromate-bromide synproportionation can optionally be attached upstream. Monitoring and quantification of BrCN generation was enabled through the implementation of in-line FTIR technology. With the Br2 and BrCN generators connected in series, 0.2â mmol BrCN per minute was produced, which corresponds to a 0.8 m solution of BrCN in dichloromethane. The modular Br2 /BrCN generator was employed for the synthesis of a diverse set of biologically relevant five- and six-membered cyclic amidines and guanidines. The set-up can either be operated in a fully integrated continuous format or, where reactive crystallization is beneficial, in semi-batch mode.
RESUMEN
A newly designed robust and safe laboratory scale reactor for syntheses under sealed-vessel conditions at 250 °C maximum temperature and 20 bar maximum pressure is presented. The reactor employs conductive heating of a sealed glass vessel via a stainless steel heating jacket and implements both online temperature and pressure monitoring in addition to magnetic stirring. Reactions are performed in 10 mL borosilicate vials that are sealed with a silicone cap and Teflon septum and allow syntheses to be performed on a 2-6 mL scale. This conductively heated reactor is compared to a standard single-mode sealed-vessel microwave instrument with respect to heating and cooling performance, stirring efficiency, and temperature and pressure control. Importantly, comparison of the reaction outcome for a number of different synthetic transformations performed side by side in the new device and a standard microwave reactor suggest that results obtained using microwave conditions can be readily mimicked in the operationally much simpler and smaller conventionally heated device.
RESUMEN
The symmetric bissilyl-dione 3 reveals two well-separated n â π* absorption bands at λmax = 637 nm (ε = 140 mol-1 dm3 cm-1) and 317 nm (ε = 2460 mol-1 dm3 cm-1). Whereas excitation of 3 at λ = 360/365 nm affords an isolable siloxyketene 4 in excellent yields, irradiation at λ = 590/630 nm leads to the stereo-selective and quantitative formation of the siloxyrane 5. These remarkable wavelength-dependent rearrangements are based on the electronic and steric properties provided by the hypersilyl groups. While the siloxyketene 4 is formed via a hitherto unknown 1,3-hypersilyl migration via the population of a second excited singlet state (S2, λmax = 317 nm, a rare case of anti-Kasha reactivity), the siloxyrane 5 emerges from the first excited triplet state (T1via S1λmax = 637 nm). These distinct reaction pathways can be traced back to specific energy differences between the S2, S1 and T1, an electronic consequence of the bissilyl substited α-dione (the "pearl"). The hypersilyl groups act as protective ''oyster shell", which are responsible for the clean formation of 4 and 5 basically omitting side products. We describe novel synthetic pathways to achieve hypersilyl substitution (3) and report an in-depth investigation of the photorearrangements of 3 using UV/vis, in situ IR, NMR spectroscopy and theoretical calculations.
RESUMEN
We have synthesized the first isolable geminal bisenolates L2K2Ge[(CO)R]2 (R=2,4,6-trimethylphenyl (2 a,b), L=THF for (2 a) or [18]-crown-6 for (2 b)), a new synthon for the synthesis of organometallic reagents. The formation of these derivatives was confirmed by NMR spectroscopy and X-ray crystallographic analysis. The UV/Vis spectra of these anions show three distinct bands, which were assigned by DFT calculations. The efficiency of 2 a,b to serve as new building block in macromolecular chemistry is demonstrated by the reactions with two different types of electrophiles (acid chlorides and alkyl halides). In all cases the salt metathesis reaction gave rise to novel Ge-based photoinitiators in good yields.
RESUMEN
The most challenging step in the preparation of many opioid antagonists is the selective N-demethylation of a 14-hydroxymorphinan precursor. This process is carried out on a large scale using stoichiometric amounts of hazardous chemicals like cyanogen bromide or chloroformates. We have developed a mild reagent- and catalyst-free procedure for the N-demethylation step based on the anodic oxidation of the tertiary amine. The ensuing intermediates can be readily hydrolyzed to the target nor-opioids in very good yields.