A highly ordered ring of membrane-associated filaments in budding yeast.

In Saccharomyces cerevisiae, a highly ordered ring of 10-nm filaments is intimately associated with the plasma membrane within the neck of the bud. The ring is formed during early bud emergence and disappears when cytokinesis begins.

MPS1 and MPS2: novel yeast genes defining distinct steps of spindle pole body duplication.

It is crucial to the eucaryotic cell cycle that the centrosome undergo precise duplication to generate the two poles of the mitotic spindle. In the budding yeast Saccharomyces cerevisiae, centrosomal functions are provided by the spindle pole body (SPB), which is duplicated at the time of bud emergence in G1 of the cell cycle. Genetic control of this process has previously been revealed by the characterization of mutants in CDC31 and KAR1, which prevent SPB duplication and lead to formation of a monopolar spindle. Newly isolated mutations described here (mps1 and mps2, for monopolar spindle) similarly cause monopolar mitosis but their underlying effects on SPB duplication are unique. The MPS1 gene is found by electron microscopy to be essential for proper formation of the site at which the new SPB normally arises adjacent to the existing one. By contrast, a mutation in MPS2 permits duplication to proceed, but the newly formed SPB is structurally defective and unable to serve as a functional spindle pole. Distinct temporal requirements for the CDC31, MPS1, and MPS2 gene functions during the SPB duplication cycle further demonstrate the individual roles of these genes in the morphogenetic pathway.

Identification of a developmentally regulated septin and involvement of the septins in spore formation in Saccharomyces cerevisiae.

The Saccharomyces cerevisiae CDC3, CDC10, CDC11, and CDC12 genes encode a family of related proteins, the septins, which are involved in cell division and the organization of the cell surface during vegetative growth. A search for additional S. cerevisiae septin genes using the polymerase chain reaction identified SPR3, a gene that had been identified previously on the basis of its sporulation-specific expression. The predicted SPR3 product shows 25-40% identity in amino acid sequence to the previously known septins from S. cerevisiae and other organisms. Immunoblots confirmed the sporulation-specific expression of Spr3p and showed that other septins are also present at substantial levels in sporulating cells. Consistent with the expression data, deletion of SPR3 in either of two genetic backgrounds had no detectable effect on exponentially growing cells. In one genetic background, deletion of SPR3 produced a threefold reduction in sporulation efficiency, although meiosis appeared to be completed normally. In this background, deletion of CDC10 had no detectable effect on sporulation. In the other genetic background tested, the consequences of the two deletions were reversed. Immunofluorescence observations suggest that Spr3p, Cdc3p, and Cdc11p are localized to the leading edges of the membrane sacs that form near the spindle-pole bodies and gradually extend to engulf the nuclear lobes that contain the haploid chromosome sets, thus forming the spores. Deletion of SPR3 does not prevent the localization of Cdc3p and Cdc11p, but these proteins appear to be less well organized, and the intensity of their staining is reduced. Taken together, the results suggest that the septins play important but partially redundant roles during the process of spore formation.

MIF2 is required for mitotic spindle integrity during anaphase spindle elongation in Saccharomyces cerevisiae.

The function of the essential MIF2 gene in the Saccharomyces cerevisiae cell cycle was examined by overepressing or creating a deficit of MIF2 gene product. When MIF2 was overexpressed, chromosomes missegregated during mitosis and cells accumulated in the G2 and M phases of the cell cycle. Temperature sensitive mutants isolated by in vitro mutagenesis delayed cell cycle progression when grown at the restrictive temperature, accumulated as large budded cells that had completed DNA replication but not chromosome segregation, and lost viability as they passed through mitosis. Mutant cells also showed increased levels of mitotic chromosome loss, supersensitivity to the microtubule destabilizing drug MBC, and morphologically aberrant spindles. mif2 mutant spindles arrested development immediately before anaphase spindle elongation, and then frequently broke apart into two disconnected short half spindles with misoriented spindle pole bodies. These findings indicate that MIF2 is required for structural integrity of the spindle during anaphase spindle elongation. The deduced Mif2 protein sequence shared no extensive homologies with previously identified proteins but did contain a short region of homology to a motif involved in binding AT rich DNA by the Drosophila D1 and mammalian HMGI chromosomal proteins.

Role of calmodulin and Spc110p interaction in the proper assembly of spindle pole body compenents.

Previously we demonstrated that calmodulin binds to the carboxy terminus of Spc110p, an essential component of the Saccharomyces cerevisiae spindle pole body (SPB), and that this interaction is required for chromosome segregation. Immunoelectron microscopy presented here shows that calmodulin and thus the carboxy terminus of Spc110p localize to the central plaque. We created temperature-sensitive SPC110 mutations by combining PCR mutagenesis with a plasmid shuffle strategy. The temperature-sensitive allele spc110-220 differs from wild type at two sites. The cysteine 911 to arginine mutation resides in the calmodulin-binding site and alone confers a temperature-sensitive phenotype. Calmodulin overproduction suppresses the temperature sensitivity of spc110-220. Furthermore, calmodulin levels at the SPB decrease in the mutant cells at the restrictive temperature. Thus, calmodulin binding to Spc110-220p is defective at the nonpermissive temperature. Synchronized mutant cells incubated at the nonpermissive temperature arrest as large budded cells with a G2 content of DNA and suffer considerable lethality. Immunofluorescent staining demonstrates failure of nuclear DNA segregation and breakage of many spindles. Electron microscopy reveals an aberrant nuclear structure, the intranuclear microtubule organizer (IMO), that differs from a SPB but serves as a center of microtubule organization. The IMO appears during nascent SPB formation and disappears after SPB separation. The IMO contains both the 90-kD and the mutant 110-kD SPB components. Our results suggest that disruption of the calmodulin Spc110p interaction leads to the aberrant assembly of SPB components into the IMO, which in turn perturbs spindle formation.

NDC1: a nuclear periphery component required for yeast spindle pole body duplication.

The spindle pole body (SPB) of Saccharomyces cerevisiae serves as the centrosome in this organism, undergoing duplication early in the cell cycle to generate the two poles of the mitotic spindle. The conditional lethal mutation ndc1-1 has previously been shown to cause asymmetric segregation, wherein all the chromosomes go to one pole of the mitotic spindle (Thomas, J. H., and D. Botstein. 1986. Cell. 44:65-76). Examination by electron microscopy of mutant cells subjected to the nonpermissive temperature reveals a defect in SPB duplication. Although duplication is seen to occur, the nascent SPB fails to undergo insertion into the nuclear envelope. The parental SPB remains functional, organizing a monopolar spindle to which all the chromosomes are presumably attached. Order-of-function experiments reveal that the NDC1 function is required in G1 after alpha-factor arrest but before the arrest caused by cdc34. Molecular analysis shows that the NDC1 gene is essential and that it encodes a 656 amino acid protein (74 kD) with six or seven putative transmembrane domains. This evidence for membrane association is further supported by immunofluorescent localization of the NDC1 product to the vicinity of the nuclear envelope. These findings suggest that the NDC1 protein acts within the nuclear envelope to mediate insertion of the nascent SPB.

Regulation of meiotic S phase by Ime2 and a Clb5,6-associated kinase in Saccharomyces cerevisiae.

Cyclin-dependent kinase (Cdk) mutations that prevent entry into the mitotic cell cycle of budding yeast fail to block meiotic DNA replication, suggesting there may be fundamental differences between these pathways. However, S phase in meiosis was found to depend on the same B-type cyclins (Clb5 and Clb6) as it does in mitosis. Meiosis differs instead in the mechanism that controls removal of the Cdk inhibitor Sic1. Destruction of Sic1 and activation of a Clb5-dependent kinase in meiotic cells required the action of the meiosis-specific protein kinase Ime2, thereby coupling early meiotic gene expression to control of DNA replication for meiosis.

The Ubc3 (Cdc34) ubiquitin-conjugating enzyme is ubiquitinated and phosphorylated in vivo.

The transition from G1 to S phase of the cell cycle in Saccharomyces cerevisiae requires the activity of the Ubc3 (Cdc34) ubiquitin-conjugating enzyme. S. cerevisiae cells lacking a functional UBC3 (CDC34) gene are able to execute the Start function that initiates the cell cycle but fail to form a mitotic spindle or enter S phase. The Ubc3 (Cdc34) enzyme has previously been shown to catalyze the attachment of multiple ubiquitin molecules to model substrates, suggesting that the role of this enzyme in cell cycle progression depends on its targeting an endogenous protein(s) for degradation. In this report, we demonstrate that the Ubc3 (Cdc34) protein is itself a substrate for both ubiquitination and phosphorylation. Immunochemical localization of the gene product to the nucleus renders it likely that the relevant substrates similarly reside within the nucleus.

A yeast gene essential for regulation of spindle pole duplication.

In eucaryotic cells, duplication of spindle poles must be coordinated with other cell cycle functions. We report here the identification in Saccharomyces cerevisiae of a temperature-sensitive lethal mutation, esp1, that deregulates spindle pole duplication. Mutant cells transferred to the nonpermissive temperature became unable to continue DNA synthesis and cell division but displayed repeated duplication of their spindle pole bodies. Although entry into this state after transient challenge by the nonpermissive temperature was largely lethal, rare survivors were recovered and found to have become increased in ploidy. If the mutant cells were held in G0 or G1 during exposure to the elevated temperature, they remained viable and maintained normal numbers of spindle poles. These results suggest dual regulation of spindle pole duplication, including a mechanism that promotes duplication as cells enter the division cycle and a negative regulatory mechanism, controlled by ESP1, that limits duplication to a single occurrence in each cell division cycle. Tetrad analysis has revealed that ESP1 resides at a previously undescribed locus on the right arm of chromosome VII.

Cdc53p acts in concert with Cdc4p and Cdc34p to control the G1-to-S-phase transition and identifies a conserved family of proteins.

Regulation of cell cycle progression occurs in part through the targeted degradation of both activating and inhibitory subunits of the cyclin-dependent kinases. During G1, CDC4, encoding a WD-40 repeat protein, and CDC34, encoding a ubiquitin-conjugating enzyme, are involved in the destruction of these regulators. Here we describe evidence indicating that CDC53 also is involved in this process. Mutations in CDC53 cause a phenotype indistinguishable from those of cdc4 and cdc34 mutations, numerous genetic interactions are seen between these genes, and the encoded proteins are found physically associated in vivo. Cdc53p defines a large family of proteins found in yeasts, nematodes, and humans whose molecular functions are uncharacterized. These results suggest a role for this family of proteins in regulating cell cycle proliferation through protein degradation.

Requirement for ESP1 in the nuclear division of Saccharomyces cerevisiae.

Mutations in the ESP1 gene of Saccharomyces cerevisiae disrupt normal cell-cycle control and cause many cells in a mutant population to accumulate extra spindle pole bodies. To determine the stage at which the esp1 gene product becomes essential for normal cell-cycle progression, synchronous cultures of ESP1 mutant cells were exposed to the nonpermissive temperature for various periods of time. The mutant cells retained viability until the onset of mitosis, when their viability dropped markedly. Examination of these cells by fluorescence and electron microscopy showed the first detectable defect to be a structural failure in the spindle. Additionally, flow cytometric analysis of DNA content demonstrated that massive chromosome missegregation accompanied this failure of spindle function. Cytokinesis occurred despite the aberrant nuclear division, which often resulted in segregation of both spindle poles to the same cell. At later times, the missegregated spindle pole bodies entered a new cycle of duplication, thereby leading to the accumulation of extra spindle pole bodies within a single nucleus. The DNA sequence predicts a protein product similar to those of two other genes that are also required for nuclear division: the cut1 gene of Schizosaccharomyces pombe and the bimB gene of Aspergillus nidulans.

Characterization of four B-type cyclin genes of the budding yeast Saccharomyces cerevisiae.

The previously described CLB1 and CLB2 genes encode a closely related pair of B-type cyclins. Here we present the sequences of another related pair of B-type cyclin genes, which we term CLB3 and CLB4. Although CLB1 and CLB2 mRNAs rise in abundance at the time of nuclear division, CLB3 and CLB4 are turned on earlier, rising early in S phase and declining near the end of nuclear division. When all possible single and multiple deletion mutants were constructed, some multiple mutations were lethal, whereas all single mutants were viable. All lethal combinations included the clb2 deletion, whereas the clb1 clb3 clb4 triple mutant was viable, suggesting a key role for CLB2. The inviable multiple clb mutants appeared to have a defect in mitosis. Conditional clb mutants arrested as large budded cells with a G2 DNA content but without any mitotic spindle. Electron microscopy showed that the spindle pole bodies had duplicated but not separated, and no spindle had formed. This suggests that the Clb/Cdc28 kinase may have a relatively direct role in spindle formation. The two groups of Clbs may have distinct roles in spindle formation and elongation.

Preferential Occurrence of Nonsister Spores in Two-Spored Asci of SACCHAROMYCES CEREVISIAE: Evidence for Regulation of Spore-Wall Formation by the Spindle Pole Body.

Yeast cells subjected to a reversible thermal arrest of meiosis yielded progressively fewer spores per ascus as the arrest was extended. Dissection of two-spored asci by a newly developed method that prevents selection of false asci revealed that the spores were not a random sample of the haploid meiotic products. Most, if not all, pairs of spores contain nonsister products of the reductional division. Electron microscopic examination of the meiotic cells revealed the cytological basis for this bias. All four spindle pole bodies (SPBs) present at the second meiotic division normally gain a structural modification (the outer plaque) upon which the initiation of the prospore wall occurs. In the formation of a two-spored ascus, only one spindle pole body on each meiosis II spindle was so modified. These observations suggest that the morphogenesis of spores is regulated at meiosis II by limiting the number of SPBs gaining the outer plaque. The enhancement of spore yield upon addition of fresh medium suggests that this morphogenetic regulation responds more directly to nutrient deprivation arising during the thermal arrest, rather than to elevated temperature per se.

Flow cytometric quantification of surface-displayed recombinant receptors on staphylococci.

Surface display of recombinant proteins on bacteria and phages has become an important tool in bioscience. To evaluate the various host systems, a great need exists for quantitative methods to determine the densities of displayed proteins and peptides on the bacteria and phage surfaces. Here we describe how a method previously applied for quantification of surface proteins on mammalian cells has been adapted for quantification of chimeric receptors surface-displayed on bacteria; in this study, the bacteria being recombinant staphylococci. The presented method takes advantage of fluorescence-activated cell sorting (FACS) technology and a new type of nonfluorescent plastic beads, similar in size (2 microns in diameter) to bacterial cells, and thus suitable for generation of calibration curves from which the number of chimeric receptors can be obtained. The method was used to estimate the number of antigenic sites on two types of recombinant staphylococci, both carrying heterologous chimeric receptors, and it was found that the recombinant Staphylococcus carnosus cells carried approximately 10(4) surface-displayed antigenic sites, while recombinant Staphylococcus xylosus exposed approximately 3 x 10(3) sites per cell. The use of the deviced method for different applications is discussed.

Selective effect of trichotecolone on hemopoietic tumor cells.

The effects of trichothecolone, a mycotoxin produced by the mould Trichothecium roseum, were tested at graded concentrations (50 to 250 micrograms/ml) on the in vitro growth of human and murine normal (CFU-GM, IARC 171, FDC-P2) and tumoral (HL60, P388, L1210) hemopoietic cells. A selective cytotoxicity towards tumor cells was observed: an irreversible, concentration dependent inhibition of growth being seen on all tumor cell lines under consideration, while normal cells appeared to be rather insensitive to this drug. In vivo, trichothecolone significantly increased the survival of mice bearing P388 leukemia: a 150 mg/kg/dose, 5 times a day, for 5 days led to a T/C of 145%. Both in vitro and in vivo data suggest that trichothecolone may be an interesting antitumor agent, particularly considering the clear difference in sensitivity of normal and tumor cells to this drug.

Behavior of spindles and spindle plaques in the cell cycle and conjugation of Saccharomyces cerevisiae.

The interdependence of spindle plaque with other aspects of cell division and conjugation in Saccharomyces cerevisiae has been investigated. Three forms of the spindle plaque appear sequentially before the formation of the complete, intranuclear spindle. The single plaque is present initially in the mitotic cycle; it becomes transformed into a satellite-bearing single plaque during the latter part of G1. Subsequently, plaque duplication yields the double plaque characteristic of the early phase of budding, which coincides with the period of chromosome replication (S). The eventual separation of these plaques to form a complete spindle, with a single plaque at each pole, is nearly coincident with the completion of S. The form of the plaque differs in two independent cases of G1 arrest: the single plaque is found in a cell in stationary arrest of growth, whereas a cell arrested by mating factors in preparation for conjugation contains a satellite-bearing single plaque. The latter form is retained during zygote formation, where it serves as the initial site of fusion of each prezygotic nuceus with the other. This fusion results in the formation of a single zygotic nucleus with a satellite-bearing single plaque, which is subsequently transformed into a double plaque as the zygote buds. The double plaque is situated adjacent to the site of bud emergence in both vegetative cells and zygotes.

Electron microscopic observations on the meiotic karyotype of diploid and tetraploid Saccharomyces cerevisiae.

Certain strains of Saccharomyces cerevisiae contain visible segments of synaptonemal complex which are apparent components of bivalents in pachytene of meiotic prophase. The synaptonemal complex has the typical width in the frontal plane but is unusually thin in the sagittal plane, thus accounting for its poor visibility. Amorphous densities situated adjacent to the central element occur at intervals suggesting their coincidence with sites of crossing over. Reconstruction of the synaptonemal complex from serial sections has permitted karyotypic analysis. The number of segments of synaptonemal complex and the distribution of their legths is consistent with the genetic map. Two, possibly three, segments enter the nucleolus as if bearing sequences encoding ribosomal RNA. Reconstruction of tetraploid nuclei reveals an approximate doubling of the diploid chromosome number and confirms the pattern of nucleolar entry. Quadrivalent pairing is evident between the pairs of synaptonemal complex segments in the tetraploid nuclei.

Reversible pachytene arrest of Saccharomyces cerevisiae at elevated temperature.

The temperature sensitivity of sporulation in a well-characterized yeast strain lacking any known temperature sensitive genes has been investigated. Cytological observations by electron microscopy demonstrate that cells incubated in sporulation medium at a temperature inhibitory to sporulation became arrested in meiotic prophase. The stage of arrest was identified as pachytene by the presence of duplicated (but unseparated) spindle pole bodies and synaptonemal complex. Transfer of the arrested culture to lower temperature permitted resumption of meiosis and sporulation; transfer to vegetative medium resulted in reversion to mitotic division. Genetic analysis of cells that had reverted to mitosis revealed that commitment to intragenic recombination had occurred by the time of arrest. Prolonged incubation at the elevated temperature resulted in the enhancement of intragenic recombination above normal levels, suggesting that some aspect of recombination continued to occur during the pachytene arrest. Evidence is presented that DNA replication, although depressed overall in the arrested cultures, had occurred to completion in many arrested cells.