Phospholipid acyl tail affects lipid headgroup orientation and membrane hydration.

Biomembrane hydration is crucial for understanding processes at biological interfaces. While the effect of the lipid headgroup has been studied extensively, the effect (if any) of the acyl chain chemical structure on lipid-bound interfacial water has remained elusive. We study model membranes composed of phosphatidylethanolamine (PE) and phosphatidylcholine (PC) lipids, the most abundant lipids in biomembranes. We explore the extent to which the lipid headgroup packing and associated water organization are affected by the lipid acyl tail unsaturation and chain length. To this end, we employ a combination of surface-sensitive techniques, including sum-frequency generation spectroscopy, surface pressure measurements, and Brewster angle microscopy imaging. Our results reveal that the acyl tail structure critically affects the headgroup phosphate orientational distribution and lipid-associated water molecules, for both PE and PC lipid monolayers at the air/water interface. These insights reveal the importance of acyl chain chemistry in determining not only membrane fluidity but also membrane hydration.

Location and Conformation of the LKα14 Peptide in Water/Ethanol Mixtures.

It is widely recognized that solvation is one of the major factors determining structure and functionality of proteins and long peptides, however it is a formidable challenge to address it both experimentally and computationally. For this reason, simple peptides are used to study fundamental aspects of solvation. It is well established that alcohols can change the peptide conformation and tuning of the alcohol content in solution can dramatically affect folding and, as a consequence, the function of the peptide. In this work, we focus on the leucine and lysine based LKα14 peptide designed to adopt an α-helical conformation at an apolar-polar interface. We investigate LKα14 peptide's bulk and interfacial behavior in water/ethanol mixtures combining a suite of experimental techniques (namely, circular dichroism and nuclear magnetic resonance spectroscopy for the bulk solution, surface pressure measurements and vibrational sum frequency generation spectroscopy for the air-solution interface) with molecular dynamics simulations. We observe that ethanol highly affects both the peptide location and conformation. At low ethanol content LKα14 lacks a clear secondary structure in bulk and shows a clear preference to reside at the air-solution interface. When the ethanol content in solution increases, the peptide's interfacial affinity is markedly reduced and the peptide approaches a stable α-helical conformation in bulk facilitated by the amphiphilic nature of the ethanol molecules.

Both Poly(ethylene glycol) and Poly(methyl ethylene phosphate) Guide Oriented Adsorption of Specific Proteins.

Developing new functional biomaterials requires the ability to simultaneously repel unwanted and guide wanted protein adsorption. Here, we systematically interrogate the factors determining the protein adsorption by comparing the behaviors of different polymeric surfaces, poly(ethylene glycol) and a poly(phosphoester), and five different natural proteins. Interestingly we observe that, at densities comparable to those used in nanocarrier functionalization, the same proteins are either adsorbed (fibrinogen, human serum albumin, and transferrin) or repelled (immunoglobulin G and lysozyme) by both polymers. However, when adsorption takes place, the specific surface dictates the amount and orientation of each protein.

Engineering Proteins at Interfaces: From Complementary Characterization to Material Surfaces with Designed Functions.

Once materials come into contact with a biological fluid containing proteins, proteins are generally-whether desired or not-attracted by the material's surface and adsorb onto it. The aim of this Review is to give an overview of the most commonly used characterization methods employed to gain a better understanding of the adsorption processes on either planar or curved surfaces. We continue to illustrate the benefit of combining different methods to different surface geometries of the material. The thus obtained insight ideally paves the way for engineering functional materials that interact with proteins in a predetermined manner.

Surface-specific vibrational spectroscopy of the water/silica interface: screening and interference.

Surface-specific vibrational sum-frequency generation spectroscopy (V-SFG) is frequently used to obtain information about the molecular structure at charged interfaces. Here, we provide experimental evidence that not only screening of surface charges but also interference limits the extent to which V-SFG probes interfacial water at sub-mM salt concentrations. As a consequence, V-SFG yields information about the ∼single monolayer interfacial region not only at very high ionic strength, where the surface charge is effectively screened, but also for pure water due to the particularly large screening length at this low ionic strength. At these low ionic strengths, the large screening lengths cause destructive interference between contributions in the surface region. A recently proposed theoretical framework near-quantitatively describes our experimental findings by considering only interference and screening. However, a comparison between NaCl and LiCl reveals ion specific effects in the screening efficiency of different electrolytes. Independent of electrolyte, the hydrogen bonding strength of water right at the interface is enhanced at high electrolyte concentrations.

Repelling and ordering: the influence of poly(ethylene glycol) on protein adsorption.

Development of new materials for drug delivery and biosensing requires the fine-tuning of interfacial properties. We report here the influence of the poly(ethylene glycol) (PEG) grafting density in model phospholipid monolayers on the adsorption behavior of bovine serum albumin and human fibrinogen, not only with respect to the amount of adsorbed protein, but also its orientational ordering on the surface. As expected, with increasing interfacial PEG density, the amount of adsorbed protein decreases up to the point where complete protein repellency is reached. However, at intermediate concentrations, the net orientation of adsorbed fibrinogen is highest. The different proteins respond differently to PEG, not only in the amount of protein adsorbed, but also in the manner that proteins adsorb. The results show that for specific cases, tuning the interfacial PEG concentration allows to guide the protein adsorption configuration, a feature sought after in materials for both biosensing and biomedical applications.

Second harmonic light scattering from the surface of colloidal objects: theory and applications.

Because properties of colloids containing micro- and nano-particles are much influenced by the structure of, and interactions occurring at, the particle surface, it is important to be able to characterize the particle surface in situ and nondestructively. Nonlinear light scattering from colloidal particles has been developed into a powerful and versatile technique for characterizing particle surfaces since the first demonstration of the detection of second harmonic generation from molecules adsorbed on micrometer-sized colloidal particles by Eisenthal and co-workers (Wang, H.; Yan, E. C. Y.; Borguet, E.; Eisenthal, K. B. Second Harmonic Generation from the Surface of Centrosymmetric Particles in Bulk Solution. Chem. Phys. Lett. 1996, 259, 15-20). At present, second harmonic light scattering from the particle surface can be quantitatively described by theoretical models and used to measure the adsorption kinetics, molecular structure, and reaction rates at the surfaces of a variety of micrometer- to nanometer-sized particles, including biological cells.

Nonlinear light scattering and spectroscopy of particles and droplets in liquids.

Nano- and microparticles have optical, structural, and chemical properties that differ from both their building blocks and the bulk materials themselves. These different physical and chemical properties are induced by the high surface-to-volume ratio. As a logical consequence, to understand the properties of nano- and microparticles, it is of fundamental importance to characterize the particle surfaces and their interactions with the surrounding medium. Recent developments of nonlinear light scattering techniques have resulted in a deeper insight of the underlying light-matter interactions. They have shed new light on the molecular mechanism of surface kinetics in solution, properties of interfacial water in contact with hydrophilic and hydrophobic particles and droplets, molecular orientation distribution of molecules at particle surfaces in solution, interfacial structure of surfactants at droplet interfaces, acid-base chemistry on particles in solution, and vesicle structure and transport properties.

Fibril formation and ordering of disordered FUS LC driven by hydrophobic interactions.

Biomolecular condensates, protein-rich and dynamic membrane-less organelles, play critical roles in a range of subcellular processes, including membrane trafficking and transcriptional regulation. However, aberrant phase transitions of intrinsically disordered proteins in biomolecular condensates can lead to the formation of irreversible fibrils and aggregates that are linked to neurodegenerative diseases. Despite the implications, the interactions underlying such transitions remain obscure. Here we investigate the role of hydrophobic interactions by studying the low-complexity domain of the disordered 'fused in sarcoma' (FUS) protein at the air/water interface. Using surface-specific microscopic and spectroscopic techniques, we find that a hydrophobic interface drives fibril formation and molecular ordering of FUS, resulting in solid-like film formation. This phase transition occurs at 600-fold lower FUS concentration than required for the canonical FUS low-complexity liquid droplet formation in bulk. These observations highlight the importance of hydrophobic effects for protein phase separation and suggest that interfacial properties drive distinct protein phase-separated structures.

Lipid-driven condensation and interfacial ordering of FUS.

Protein condensation into liquid-like structures is critical for cellular compartmentalization, RNA processing, and stress response. Research on protein condensation has primarily focused on membraneless organelles in the absence of lipids. However, the cellular cytoplasm is full of lipid interfaces, yet comparatively little is known about how lipids affect protein condensation. Here, we show that nonspecific interactions between lipids and the disordered fused in sarcoma low-complexity (FUS LC) domain strongly affect protein condensation. In the presence of anionic lipids, FUS LC formed lipid-protein clusters at concentrations more than 30-fold lower than required for pure FUS LC. Lipid-triggered FUS LC clusters showed less dynamic protein organization than canonical, lipid-free FUS LC condensates. Lastly, we found that phosphatidylserine membranes promoted FUS LC condensates having ß sheet structures, while phosphatidylglycerol membranes initiated unstructured condensates. Our results show that lipids strongly influence FUS LC condensation, suggesting that protein-lipid interactions modulate condensate formation in cells.

Communication: Reactions and adsorption at the surface of silver nanoparticles probed by second harmonic generation.

Even though nanoparticles have dimensions much smaller than the optical wavelength and shapes commonly with inversion symmetry, we show, for the first time, direct experimental evidence that second harmonic generation (SHG) can be detected from the surface layer of metallic nanoparticles, in this case 40 nm radius Ag particles. The SH intensity detected is shown to substantially decrease upon chemical bonding of thiol molecules to the Ag particle surface. The surface generated SH intensity can be used for probing properties and processes at the nanoparticle surface.

In Situ Label-Free Study of Protein Adsorption on Nanoparticles.

Improving the design of nanoparticles for use as drug carriers or biosensors requires a better understanding of the protein-nanoparticle interaction. Here, we present a new tool to investigate this interaction in situ and without additional labeling of the proteins and/or nanoparticles. By combining nonresonant second-harmonic light scattering with a modified Langmuir model, we show that it is possible to gain insight into the adsorption behavior of blood proteins, namely fibrinogen, human serum albumin, and transferrin, onto negatively charged polystyrene nanoparticles. The modified Langmuir model gives us access to the maximum amount of adsorbed protein, the apparent binding constant, and Gibbs free energy. Furthermore, we employ the method to investigate the influence of the nanoparticle size on the adsorption of human serum albumin and find that the amount of adsorbed protein increases more than the surface area per nanoparticle for larger diameters.

Water at charged interfaces.

The ubiquity of aqueous solutions in contact with charged surfaces and the realization that the molecular-level details of water-surface interactions often determine interfacial functions and properties relevant in many natural processes have led to intensive research. Even so, many open questions remain regarding the molecular picture of the interfacial organization and preferential alignment of water molecules, as well as the structure of water molecules and ion distributions at different charged interfaces. While water, solutes and charge are present in each of these systems, the substrate can range from living tissues to metals. This diversity in substrates has led to different communities considering each of these types of aqueous interface. In this Review, by considering water in contact with metals, oxides and biomembranes, we show the essential similarity of these disparate systems. While in each case the classical mean-field theories can explain many macroscopic and mesoscopic observations, it soon becomes apparent that such theories fail to explain phenomena for which molecular properties are relevant, such as interfacial chemical conversion. We highlight the current knowledge and limitations in our understanding and end with a view towards future opportunities in the field.

Control of the orientational order and nonlinear optical response of the "push-pull" chromophore RuPZn via specific incorporation into densely packed monolayer ensembles of an amphiphilic 4-helix bundle peptide: second harmonic generation at high chromophore densities.

The macroscopic nonlinear optical response of the "push-pull" chromophore RuPZn incorporated into a single monolayer of the amphiphilic 4-helix bundle peptide (AP0) covalently attached to a solid substrate at high in-plane density has been measured. The second-order susceptibility, chi(zzz), was found to be in the range of approximately 15 x 10(-9) esu, consistent with a coherent sum of the nonlinear contributions from the individual chromophores (beta) as previously measured in isotropic solution through hyper-Rayleigh scattering as well as estimated from theoretical calculations. The microscopic hyperpolarizability of the RuPZn chromophore is preserved upon incorporation into the peptide monolayer, suggesting that the chromophore-chromophore interactions in the densely packed ensemble do not substantially affect the first-order molecular hyperpolarizability. The polarization angle dependence of the second harmonic signal reveals that the chromophore is vectorially oriented in the two-dimensional ensemble. Analysis of the order parameter together with information obtained from grazing incidence X-ray diffraction help in determining the chromophore orientation within the AP0-RuPZn monolayer. Taking into account an average pitch angle of approximately 20 degrees characterizing the coiled-coil structure of the peptide bundle, the width of the bundle's tilt angle distribution should be sigma < or = 20 degrees, resulting in a mean value of the tilt angle 23 degrees < or = theta(0) < or = 37 degrees.

The effect of particle size in second harmonic generation from the surface of spherical colloidal particles. I: experimental observations.

The size of the colloidal particle has a dramatic effect on the efficiency of optical second harmonic generation (SHG) from the particle surface. This effect is illustrated with the second harmonic intensity measured from submicrometer polystyrene beads adsorbed with malachite green dye molecules in aqueous solution, both in the forward direction and as a function of the scattering angle in the horizontal plane. In the forward scattering direction, the SHG efficiency initially increases rapidly with the particle size. The efficiency peaks at approximately 1 mum diameter and then decreases with the particle size. The majority of the SH light generated from the particle surface scatters away from the forward direction for smaller particles. In particular for particles with diameter smaller than 100 nm the position of the maximum is nearly 90 degrees away from the forward direction. A straightforward phenomenological model is used to predict that the angle of maximum SH efficiency tilts more toward the forward direction for particles with larger diameter as well as higher refractive index.

Interfacial Conformation of Hydrophilic Polyphosphoesters Affects Blood Protein Adsorption.

Synthetic polymers are commonly used as protein repelling materials for a variety of biomedical applications. Despite their widespread use, the fundamental mechanism underlying protein repellence is often elusive. Such insights are essential for improving existing and developing new materials. Here, we investigate how subtle differences in the chemistry of hydrophilic polyphosphoesters influence the adsorption of the human blood proteins serum albumin and fibrinogen. Using thermodynamic measurements, surface-specific vibrational spectroscopy, and Brewster angle microscopy, we investigate protein adsorption, hydration, and steric repulsion properties of the polyphosphoester polymers. Whereas both surface hydration and polymer conformation of the polymers vary substantially as a consequence of the chemical differences in the polymer structure, the protein repellency ability of these hydrophilic materials appears to be dominated by steric repulsion.

Saturation of charge-induced water alignment at model membrane surfaces.

The electrical charge of biological membranes and thus the resulting alignment of water molecules in response to this charge are important factors affecting membrane rigidity, transport, and reactivity. We tune the surface charge density by varying lipid composition and investigate the charge-induced alignment of water molecules using surface-specific vibrational spectroscopy and molecular dynamics simulations. At low charge densities, the alignment of water increases proportionally to the charge. However, already at moderate, physiologically relevant charge densities, water alignment starts to saturate despite the increase in the nominal surface charge. The saturation occurs in both the Stern layer, directly at the surface, and in the diffuse layer, yet for distinctly different reasons. Our results show that the soft nature of the lipid interface allows for a marked reduction of the surface potential at high surface charge density via both interfacial molecular rearrangement and permeation of monovalent ions into the interface.

Structure and growth of thin films of aniline on silver: nucleation and premelting of nanocrystallites, porosity, and crystallization.

The structure and growth of thin films of aniline vapor deposited on Ag(111) and Ag(110) surfaces have been examined using optical second harmonic generation (SHG) and linear optical differential reflectivity (DR). Aniline thin films deposited at 90 K give a detectable SH signal that arises from small polycrystallites with orientation anisotropy in the film. Upon annealing, the SH signal decreases, first due to premelting (at approximately 145 K) of the polycrystallites and then sublimation (at approximately 180 K) of the film. Quantitative analysis of the SH intensity change by a premelting model [J. Phys. Chem. 1988, 92, 7241] allows the determination of the average size of the crystallites as 1.1 nm in diameter and containing approximately 45 aniline molecules. The existence of the nanocrystalline structure and its premelting are confirmed by DR experiments. The DR signal around 145 K exhibits change corresponding to an order-disorder transition. Quantitative analysis of the DR data results in the same nanocrystallite size. Experimental observations indicate that films deposited at 90 K contain not only nanocrystallites but also approximately 30% porosity, which can be reduced by annealing. At temperatures above 195 K, micron-size crystallites start to form within the amorphous film, causing a large amount of light scattering while the film sublimates. It appears that, for molecules such as aniline with stronger intermolecular interactions, more enthalpy is released, upon adsorption to the local surrounding molecules, causing them to reorient into crystalline form. The low deposition temperature, on the other hand, prevents diffusion for further crystallization beyond nanocrystallites. The refractive index of the amorphous aniline solid can be determined as 1.68 +/- 0.03.

Ultrahigh vacuum deposition of L-cysteine on Au(110) studied by high-resolution X-ray photoemission: from early stages of adsorption to molecular organization.

We report on a high-resolution X-ray photoemission spectroscopy study on molecular-thick layers of L-cysteine deposited under ultrahigh vacuum conditions on Au(110). The analysis of core level shifts allowed us to distinguish unambiguously the states of the first-layer molecules from those of molecules belonging to the second layer. The first-layer molecules strongly interact with the metal through their sulfur headgroup. The multipeaked structure of the N 1s, O 1s, and C 1s core levels is interpreted in terms of different molecular moieties. The neutral acidic fraction (HSCH2CH(NH2)COOH) is abundant at low coverage likely associated with isolated molecules or dimers. The zwitterionic phase (HSCH2CH(NH3+)COO-) is largely dominant as the coverage approaches the monolayer limit and is related to the formation of ordered self-assembled molecular structures indicated by electron diffraction patterns. The occurrence of a small amount of cationic molecules (HSCH2CH(NH3+)COOH) is also discussed. The second-layer molecules mainly display zwitterionic character and are weakly adsorbed. Mild annealing up to 100 degrees C leads to the desorption of the second-layer molecules leaving electronic states of the first layer unaltered.