Knowledge Transfer in Support of the Development of Oxygen Concentrators in Emergency Settings During the COVID-19 Pandemic.

The COVID-19 pandemic simultaneously disrupted supply chains and generated an urgent demand in medical infrastructure. Among personal protective equipment and ventilators, there was also an urgent demand for chemical oxygen. As devices to purify oxygen could not be manufactured and shipped rapidly enough, a simple and accessible oxygen concentrator based on pressure swing adsorption was developed at ETH Zurich in spring 2020. Instead of building devices locally and shipping them, it was decided to educate others in need of oxygen. The implementation encompassed education on process chemistry, material choice, and assembly and optimization of the concentrator and was realized using synchronous teaching tools, such as video call, and asynchronous ones, such as a website and video streaming. The project gained traction and interaction with engineering teams from universities and non-Governmental Organizations (Red Cross and the UN Development Program) in developing countries and emerging market economies, including Ecuador, Mexico, Somalia, and Peru. At the end of the project, the teams were surveyed regarding their experience in the educative knowledge transfer. It was reported that the learning experience prepared these groups well to build the device and to teach others as well. Major challenges were accessing some parts of the device and optimizing its performance. While synchronous communication is expected to be a very effective teaching method, the survey results showed that explanations via a website and video streaming have contributed the most to the implementation of the oxygen concentrator and thereby provide autonomous and sustainable education tools.

Integrating DNA Encapsulates and Digital Microfluidics for Automated Data Storage in DNA.

Using DNA as a durable, high-density storage medium with eternal format relevance can address a future data storage deficiency. The proposed storage format incorporates dehydrated particle spots on glass, at a theoretical capacity of more than 20 TB per spot, which can be efficiently retrieved without significant loss of DNA. The authors measure the rapid decay of dried DNA at room temperature and present the synthesis of encapsulated DNA in silica nanoparticles as a possible solution. In this form, the protected DNA can be readily applied to digital microfluidics (DMF) used to handle retrieval operations amenable to full automation. A storage architecture is demonstrated, which can increase the storage capacity of today's archival storage systems by more than three orders of magnitude: A DNA library containing 7373 unique sequences is encapsulated and stored under accelerated aging conditions (4 days at 70 °C, 50% RH) corresponding to 116 years at room temperature and the stored information is successfully recovered.

Preserving DNA in Biodegradable Organosilica Encapsulates.

A core-shell strategy was developed to protect synthetic DNA in organosilica particles encompassing dithiol linkages allowing for a DNA loading of 1.1 wt %. DNA stability tests involving bleach as an oxidant showed that following the procedure DNA was sandwiched between core particles of ca. 450 nm size and a protective outer layer, separating the DNA from the environment. Rapid aging tests at 60 °C and 50% relative humidity revealed that the DNA protected within this material was significantly more stable than nonprotected DNA, with an expected ambient temperature half-life of over 60 years. Still, and due to the presence of the dithiol linkages in the backbone of the organosilica material, the particles degraded in the presence of reducing agents (TCEP and glutathione) and disintegrated within several days in a simulated compost environment, which was employed to test the biodegradability of the material. This is in contrast to DNA encapsulated following state of the art procedures in pure SiO2 particles, which do not biodegrade in the investigated timeframes and conditions. The results show that synthetic DNA protected within dithiol comprising organosilica particles presents a strategy to store digital data at a high storage capacity for long time frames in a fully biodegradable format.

Silica-encapsulated DNA tracers for measuring aerosol distribution dynamics in real-world settings.

Aerosolized particles play a significant role in human health and environmental risk management. The global importance of aerosol-related hazards, such as the circulation of pathogens and high levels of air pollutants, have led to a surging demand for suitable surrogate tracers to investigate the complex dynamics of airborne particles in real-world scenarios. In this study, we propose a novel approach using silica particles with encapsulated DNA (SPED) as a tracing agent for measuring aerosol distribution indoors. In a series of experiments with a portable setup, SPED were successfully aerosolized, recaptured, and quantified using quantitative polymerase chain reaction (qPCR). Position dependency and ventilation effects within a confined space could be shown in a quantitative fashion achieving detection limits below 0.1 ng particles per m3 of sampled air. In conclusion, SPED show promise for a flexible, cost-effective, and low-impact characterization of aerosol dynamics in a wide range of settings.

Ecotoxicological Assessment of DNA-Tagged Silica Particles for Environmental Tracing.

Environmental tracers are chemical species that move with a fluid and allow us to understand its origin and material transport properties. DNA-based materials have been proposed and used for tracing due to their potential for multitracing with high specificity and sensitivity. For large-scale applications of this new material it is of interest to understand its impact on the environment. We therefore assessed the ecotoxicity of sub-micron silica particles with and without encapsulated DNA in the context of surface and underground tracing of natural waterflows using standard ecotoxicity assays according to ISO standards. Acute toxicity tests were performed with Daphnia magna (48 h), showing no effect on mobility at tracer concentrations below 300 ppm. Chronic ecotoxicological potential was tested with Raphidocelis subcapitata (green algae) (72 h) and Ceriodaphnia species (7 d) with no effect observed at realistic exposure scenario concentrations for both silica particles with and without encapsulated DNA. These results suggest that large-scale environmental tracing with DNA-tagged silica particles in the given exposure scenarios has a low impact on aquatic species with low trophic levels such as select algae and planktonic crustaceans.

Genomic Encryption of Digital Data Stored in Synthetic DNA.

Today, we can read human genomes and store digital data robustly in synthetic DNA. Herein, we report a strategy to intertwine these two technologies to enable the secure storage of valuable information in synthetic DNA, protected with personalized keys. We show that genetic short tandem repeats (STRs) contain sufficient entropy to generate strong encryption keys, and that only one technology, DNA sequencing, is required to simultaneously read the key and the data. Using this approach, we experimentally generated 80 bit strong keys from human DNA, and used such a key to encrypt 17 kB of digital information stored in synthetic DNA. Finally, the decrypted information was recovered perfectly from a single massively parallel sequencing run.

Silica-Encapsulated DNA-Based Tracers for Aquifer Characterization.

Environmental tracing is a direct way to characterize aquifers, evaluate the solute transfer parameter in underground reservoirs, and track contamination. By performing multitracer tests, and translating the tracer breakthrough times into tomographic maps, key parameters such as a reservoir's effective porosity and permeability field may be obtained. DNA, with its modular design, allows the generation of a virtually unlimited number of distinguishable tracers. To overcome the insufficient DNA stability due to microbial activity, heat, and chemical stress, we present a method to encapsulated DNA into silica with control over the particle size. The reliability of DNA quantification is improved by the sample preservation with NaN3 and particle redispersion strategies. In both sand column and unconsolidated aquifer experiments, DNA-based particle tracers exhibited slightly earlier and sharper breakthrough than the traditional solute tracer uranine. The reason behind this observation is the size exclusion effect, whereby larger tracer particles are excluded from small pores, and are therefore transported with higher average velocity, which is pore size-dependent. Identical surface properties, and thus flow behavior, makes the new material an attractive tracer to characterize sandy groundwater reservoirs or to track multiple sources of contaminants with high spatial resolution.

Protein Reduction and Dialysis-Free Work-Up through Phosphines Immobilized on a Magnetic Support: TCEP-Functionalized Carbon-Coated Cobalt Nanoparticles.

Tris(2-carboxyethyl)phosphine (TCEP) is an often-used reducing agent in biochemistry owing to its selectivity towards disulfide bonds. As TCEP causes undesired consecutive side reactions in various analytical methods (e.g., gel electrophoresis, protein labeling), it is usually removed by means of dialysis or gel filtration. Here, an alternative method of separation is presented, namely the immobilization of TCEP on magnetic nanoparticles. This magnetic reagent provides a simple and rapid approach to remove the reducing agent after successful reduction. A reduction capacity of 70 µmol per gram of particles was achieved by using surface-initiated atom transfer polymerization.

Submicrometer-Sized Thermometer Particles Exploiting Selective Nucleic Acid Stability.

Encapsulated nucleic acid selective damage quantification by real-time polymerase chain reaction is used as sensing mechanism to build a novel class of submicrometer size thermometer. Thanks to the high thermal and chemical stability, and the capability of storing the read accumulated thermal history, the sensor overcomes some of current limitations in small scale thermometry.

Hollow Carbon Nanobubbles: Synthesis, Chemical Functionalization, and Container-Type Behavior in Water.

Thin-walled, hollow carbon nanospheres with a hydrophobic interior and good water dispersability can be synthesized in two steps: First, metal nanoparticles, coated with a few layers of graphene-like carbon, are selectively modified on the outside with a covalently attached hydrophilic polymer. Second, the metal core is removed at elevated temperature treatment with acid, leaving a well-defined carbon-based hydrophobic cavity. Loading experiments with the dye rhodamine B and doxorubicin confirmed the filling and release of a cargo and adjustment of a dynamic equilibrium (cargo-loaded versus release). Rhodamine B preferably accumulates in the interior of the bubbles. Filled nanobubbles allowed constant dye release into pure water. Studies of the concentration-dependent loading and release show an unusual hysteresis.

Porous, Water-Resistant Multifilament Yarn Spun from Gelatin.

Sustainability, renewability, and biodegradability of polymeric material constantly gain in importance. A plausible approach is the recycling of agricultural waste proteins such as keratin, wheat gluten, casein or gelatin. The latter is abundantly available from animal byproducts and may well serve as building block for novel polymeric products. In this work, a procedure for the dry-wet spinning of multifilament gelatin yarns was developed. The process stands out as precipitated gelatin from a ternary mixture (gelatin/solvent/nonsolvent) was spun into porous filaments. About 1000 filaments were twisted into 2-ply yarns with good tenacity (4.7 cN tex(-1)). The gelatin yarns, per se susceptible to water, were cross-linked by different polyfunctional epoxides and examined in terms of free lysyl amino groups and swelling degree in water. Ethylene glycol diglycidyl ether exhibited the highest cross-linking efficiency. Further post-treatments with gaseous formaldehyde and wool grease (lanolin) rendered the gelatin yarns water-resistant, allowing for multiple swelling cycles in water or in detergent solution. However, the swelling caused a decrease in filament porosity from ∼30% to just below 10%. To demonstrate the applicability of gelatin yarn in a consumer good, a gelatin glove with good thermal insulation capacity was fabricated.

Incorporating microorganisms into polymer layers provides bioinspired functional living materials.

Artificial two-dimensional biological habitats were prepared from porous polymer layers and inoculated with the fungus Penicillium roqueforti to provide a living material. Such composites of classical industrial ingredients and living microorganisms can provide a novel form of functional or smart materials with capability for evolutionary adaptation. This allows realization of most complex responses to environmental stimuli. As a conceptual design, we prepared a material surface with self-cleaning capability when subjected to standardized food spill. Fungal growth and reproduction were observed in between two specifically adapted polymer layers. Gas exchange for breathing and transport of nutrient through a nano-porous top layer allowed selective intake of food whilst limiting the microorganism to dwell exclusively in between a confined, well-enclosed area of the material. We demonstrated a design of such living materials and showed both active (eating) and waiting (dormant, hibernation) states with additional recovery for reinitiation of a new active state by observing the metabolic activity over two full nutrition cycles of the living material (active, hibernation, reactivation). This novel class of living materials can be expected to provide nonclassical solutions in consumer goods such as packaging, indoor surfaces, and in biotechnology.

Robust chemical preservation of digital information on DNA in silica with error-correcting codes.

Information, such as text printed on paper or images projected onto microfilm, can survive for over 500 years. However, the storage of digital information for time frames exceeding 50 years is challenging. Here we show that digital information can be stored on DNA and recovered without errors for considerably longer time frames. To allow for the perfect recovery of the information, we encapsulate the DNA in an inorganic matrix, and employ error-correcting codes to correct storage-related errors. Specifically, we translated 83 kB of information to 4991 DNA segments, each 158 nucleotides long, which were encapsulated in silica. Accelerated aging experiments were performed to measure DNA decay kinetics, which show that data can be archived on DNA for millennia under a wide range of conditions. The original information could be recovered error free, even after treating the DNA in silica at 70 °C for one week. This is thermally equivalent to storing information on DNA in central Europe for 2000 years.

Efficient magnetic recycling of covalently attached enzymes on carbon-coated metallic nanomagnets.

In the pursuit of robust and reusable biocatalysts for industrial synthetic chemistry, nanobiotechnology is currently taking a significant part. Recently, enzymes have been immobilized on different nanoscaffold supports. Carbon coated metallic nanoparticles were found to be a practically useful support for enzyme immobilization due to their large surface area, high magnetic saturation, and manipulatable surface chemistry. In this study carbon coated cobalt nanoparticles were chemically functionalized (diazonium chemistry), activated for bioconjugation (N,N-disuccinimidyl carbonate), and subsequently used in enzyme immobilization. Three enzymes, ß-glucosidase, α-chymotrypsin, and lipase B were successfully covalently immobilized on the magnetic nonsupport. The enzyme-particle conjugates formed retained their activity and stability after immobilization and were efficiently recycled from milliliter to liter scales in short recycle times.

Magnetic superbasic proton sponges are readily removed and permit direct product isolation.

Workup in organic synthesis can be very time-consuming, particularly when using reagents with both a solubility similar to that of the desired products and a tendency not to crystallize. In this respect, reactions involving organic bases would strongly benefit from a tremendously simplified separation process. Therefore, we synthesized a derivative of the superbasic proton sponge 1,8-bis(dimethylamino)naphthalene (DMAN) and covalently linked it to the strongest currently available nanomagnets based on carbon-coated cobalt metal nanoparticles. The immobilized magnetic superbase reagent was tested in Knoevenagel- and Claisen-Schmidt-type condensations and showed conversions of up to 99%. High yields of up to 97% isolated product could be obtained by simple recrystallization without using column chromatography. Recycling the catalyst was simple and fast with an insignificant decrease in catalytic activity.

Gas-phase synthesis of magnetic metal/polymer nanocomposites.

Highly magnetic metal Co nanoparticles were produced via reducing flame spray pyrolysis, and directly coated with an epoxy polymer in flight. The polymer content in the samples varied between 14 and 56 wt% of nominal content. A homogenous dispersion of Co nanoparticles in the resulting nanocomposites was visualized by electron microscopy. The size and crystallinity of the metallic fillers was not affected by the polymer, as shown by XRD and magnetic hysteresis measurements. The good control of the polymer content in the product nanocomposite was shown by elemental analysis. Further, the successful polymerization in the gas phase was demonstrated by electron microscopy and size measurements. The presented effective, dry and scalable one-step synthesis method for highly magnetic metal nanoparticle/polymer composites presented here may drastically decrease production costs and increase industrial yields.

Chemical unclonable functions based on operable random DNA pools.

Physical unclonable functions (PUFs) based on unique tokens generated by random manufacturing processes have been proposed as an alternative to mathematical one-way algorithms. However, these tokens are not distributable, which is a disadvantage for decentralized applications. Finding unclonable, yet distributable functions would help bridge this gap and expand the applications of object-bound cryptography. Here we show that large random DNA pools with a segmented structure of alternating constant and randomly generated portions are able to calculate distinct outputs from millions of inputs in a specific and reproducible manner, in analogy to physical unclonable functions. Our experimental data with pools comprising up to >1010 unique sequences and encompassing >750 comparisons of resulting outputs demonstrate that the proposed chemical unclonable function (CUF) system is robust, distributable, and scalable. Based on this proof of concept, CUF-based anti-counterfeiting systems, non-fungible objects and decentralized multi-user authentication are conceivable.

The environmental sustainability of digital content consumption.

Internet access has reached 60% of the global population, with the average user spending over 40% of their waking life on the Internet, yet the environmental implications remain poorly understood. Here, we assess the environmental impacts of digital content consumption in relation to the Earth's carrying capacity, finding that currently the global average consumption of web surfing, social media, video and music streaming, and video conferencing could account for approximately 40% of the per capita carbon budget consistent with limiting global warming to 1.5 °C, as well as around 55% of the per capita carrying capacity for mineral and metal resources use and over 10% for five other impact categories. Decarbonising electricity would substantially mitigate the climate impacts linked to Internet consumption, while the use of mineral and metal resources would remain of concern. A synergistic combination of rapid decarbonisation and additional measures aimed at reducing the use of fresh raw materials in electronic devices (e.g., lifetime extension) is paramount to prevent the growing Internet demand from exacerbating the pressure on the finite Earth's carrying capacity.

Low-nuclearity CuZn ensembles on ZnZrOx catalyze methanol synthesis from CO2.

Metal promotion could unlock high performance in zinc-zirconium catalysts, ZnZrOx, for CO2 hydrogenation to methanol. Still, with most efforts devoted to costly palladium, the optimal metal choice and necessary atomic-level architecture remain unclear. Herein, we investigate the promotion of ZnZrOx catalysts with small amounts (0.5 mol%) of diverse hydrogenation metals (Re, Co, Au, Ni, Rh, Ag, Ir, Ru, Pt, Pd, and Cu) prepared via a standardized flame spray pyrolysis approach. Cu emerges as the most effective promoter, doubling methanol productivity. Operando X-ray absorption, infrared, and electron paramagnetic resonance spectroscopic analyses and density functional theory simulations reveal that Cu0 species form Zn-rich low-nuclearity CuZn clusters on the ZrO2 surface during reaction, which correlates with the generation of oxygen vacancies in their vicinity. Mechanistic studies demonstrate that this catalytic ensemble promotes the rapid hydrogenation of intermediate formate into methanol while effectively suppressing CO production, showcasing the potential of low-nuclearity metal ensembles in CO2-based methanol synthesis.

Ferromagnetic inks facilitate large scale paper recycling and reduce bleach chemical consumption.

Deinking is a fundamental part of paper recycling. As the global paper consumption rises and exceeds even the annual paper production, recycling of this raw material is of high importance. Magnetic ink based on carbon coated magnetic nanoparticles enables an alternative approach to state of the art paper deinking. Magnetic deinking comprises three steps (preselection, washing, and magnetic separation of fibers). Preseparation of printed from nonprinted scraps of paper is feasible and reduces the paper mass which has to be fed into a deinking process. A consecutive washing process removes surficial magnetic ink that can be collected by application of a permanent magnet. Still, printed parts are subjected to a further continuous magnetic deinking step, where magnetic and nonmagnetic paper fibers can be separated. Magnetic deinking of a model print allows recovery of more than 80% of bright fibers without any harsh chemical treatment and the re-collection of more than 82% of magnetic ink.