Hexagonal Cobalt Nanosheets for High-Performance Electrocatalytic NO Reduction to NH3.

Electrocatalytic nitric oxide (NO) reduction not only provides an extremely promising strategy for ambient NH3 generation but also alleviates the artificially disrupted N-cycle balance. However, exploring efficient electrocatalysts to enhance the NO electroreduction performance remains a significant challenge. Herein, a hexagonal-close-packed Co nanosheet (hcp-Co) is prepared and exhibits a high NH3 yield of 439.50 µmol cm-2 h-1 and a Faraday efficiency of 72.58%, outperforming the face-centered cubic phase of the Co nanosheet (fcc-Co) and most reported electrocatalysts. Through the combination of density functional theory calculations and NO temperature-programmed desorption experiments, the superior catalytic NO reduction reaction (NORR) activity on the hcp-Co can be attributed to the unique electron structures and proton shuttle effect. A proof-of-concept device of Zn-NO batteries using the hcp-Co as the cathode is assembled and shows a power density of 4.66 mW cm-2, which is superior to the reported performance in the literature so far.

Integrated Tandem Electrochemical-chemical-electrochemical Coupling of Biomass and Nitrate to Sustainable Alanine.

Alanine is widely employed for synthesizing polymers, pharmaceuticals, and agrochemicals. Electrocatalytic coupling of biomass molecules and waste nitrate is attractive for the nitrate removal and alanine production under ambient conditions. However, the reaction efficiency is relatively low due to the activation of the stable substrates, and the coupling of two reactive intermediates remains challenging. Herein, we realize the integrated tandem electrochemical-chemical-electochemical synthesis of alanine from the biomass-derived pyruvic acid (PA) and waste nitrate (NO3 - ) catalyzed by PdCu nano-bead-wires (PdCu NBWs). The overall reaction pathway is demonstrated as a multiple-step catalytic cascade process via coupling the reactive intermediates NH2 OH and PA on the catalyst surface. Interestingly, in this integrated tandem electrochemical-chemical-electrochemical catalytic cascade process, Cu facilitates the electrochemical reduction of nitrate to NH2 OH intermediates, which chemically couple with PA to form the pyruvic oxime, and Pd promotes the electrochemical reduction of pyruvic oxime to the desirable alanine. This work provides a green strategy to convert waste NO3 - to wealth and enriches the substrate scope of renewable biomass feedstocks to produce high-value amino acids.

Transforming Electrocatalytic Biomass Upgrading and Hydrogen Production from Electricity Input to Electricity Output.

Integrating biomass upgrading and hydrogen production in an electrocatalytic system is attractive both environmentally and in terms of sustainability. Conventional electrolyser systems coupling anodic biosubstrate electrooxidation with hydrogen evolution reaction usually require electricity input. Herein, we describe the development of an electrocatalytic system for simultaneous biomass upgrading, hydrogen production, and electricity generation. In contrast to conventional furfural electrooxidation, the employed low-potential furfural oxidation enabled the hydrogen atom of the aldehyde group to be released as gaseous hydrogen at the anode at a low potential of approximately 0 VRHE (vs. RHE). The integrated electrocatalytic system could generate electricity of about 2 kWh per cubic meter of hydrogen produced. This study may provide a transformative technology to convert electrocatalytic biomass upgrading and hydrogen production from a process requiring electricity input into a process to generate electricity.

Defect-Rich High-Entropy Oxide Nanosheets for Efficient 5-Hydroxymethylfurfural Electrooxidation.

High-entropy oxides (HEOs), a new concept of entropy stabilization, exhibit unique structures and fascinating properties, and are thus important class of materials with significant technological potential. However, the conventional high-temperature synthesis techniques tend to afford micron-scale HEOs with low surface area, and the catalytic activity of available HEOs is still far from satisfactory because of their limited exposed active sites and poor intrinsic activity. Here we report a low-temperature plasma strategy for preparing defect-rich HEOs nanosheets with high surface area, and for the first time employ them for 5-hydroxymethylfurfural (HMF) electrooxidation. Owing to the nanosheets structure, abundant oxygen vacancies, and high surface area, the quinary (FeCrCoNiCu)3 O4 nanosheets deliver improved activity for HMF oxidation with lower onset potential and faster kinetics, outperforming that of HEOs prepared by high-temperature method. Our method opens new opportunities for synthesizing nanostructured HEOs with great potential applications.

Defect-Rich Bi12 O17 Cl2 Nanotubes Self-Accelerating Charge Separation for Boosting Photocatalytic CO2 Reduction.

Solar-driven reduction of CO2 , which converts inexhaustible solar energy into value-added fuels, has been recognized as a promising sustainable energy conversion technology. However, the overall conversion efficiency is significantly limited by the inefficient charge separation and sluggish interfacial reaction dynamics, which resulted from a lack of sufficient active sites. Herein, Bi12 O17 Cl2 superfine nanotubes with a bilayer thickness of the tube wall are designed to achieve structural distortion for the creation of surface oxygen defects, thus accelerating the carrier migration and facilitating CO2 activation. Without cocatalyst and sacrificing reagent, Bi12 O17 Cl2 nanotubes deliver high selectivity CO evolution rate of 48.6 µmol g-1 h-1 in water (16.8 times than of bulk Bi12 O17 Cl2 ), while maintaining stability even after 12 h of testing. This paves the way to design efficient photocatalysts with collaborative optimizing charge separation and CO2 activation towards CO2 photoreduction.

Real-Time Tracking and In Vivo Visualization of ß-Galactosidase Activity in Colorectal Tumor with a Ratiometric Near-Infrared Fluorescent Probe.

Development of "smart" noninvasive bioimaging probes for trapping specific enzyme activities is highly desirable for cancer therapy in vivo. Given that ß-galactosidase (ß-gal) is an important biomarker for cell senescence and primary ovarian cancers, we design an enzyme-activatable ratiometric near-infrared (NIR) probe (DCM-ßgal) for the real-time fluorescent quantification and trapping of ß-gal activity in vivo and in situ. DCM-ßgal manifests significantly ratiometric and turn-on NIR fluorescent signals simultaneously in response to ß-gal concentration, which makes it favorable for monitoring dynamic ß-gal activity in vivo with self-calibration in fluorescent mode. We exemplify DCM-ßgal for the ratiometric tracking of endogenously overexpressed ß-gal distribution in living 293T cells via the lacZ gene transfection method and OVCAR-3 cells, and further realize real-time in vivo bioimaging of ß-gal activity in colorectal tumor-bearing nude mice. Advantages of our system include light-up ratiometric NIR fluorescence with large Stokes shift, high photostability, and pH independency under the physiological range, allowing for the in vivo real-time evaluation of ß-gal activity at the tumor site with high-resolution three-dimensional bioimaging for the first time. Our work provides a potential tool for in vivo real-time tracking enzyme activity in preclinical applications.

Cu@Co with Dilatation Strain for High-Performance Electrocatalytic Reduction of Low-Concentration Nitric Oxide.

Electrocatalytic reduction of nitric oxide (NO) to ammonia (NH3 ) is a clean and sustainable strategy to simultaneously remove NO and synthesize NH3 . However, the conversion of low concentration NO to NH3 is still a huge challenge. In this work, the dilatation strain between Cu and Co interface over Cu@Co catalyst is built up and investigated for electroreduction of low concentration NO (volume ratio of 1%) to NH3 . The catalyst shows a high NH3 yield of 627.20 µg h-1 cm-2 and a Faradaic efficiency of 76.54%. Through the combination of spherical aberration-corrected transmission electron microscopy and geometric phase analyses, it shows that Co atoms occupy Cu lattice sites to form dilatation strain in the xy direction within Co region. Further density functional theory calculations and NO temperature-programmed desorption (NO-TPD) results show that the surface dilatation strain on Cu@Co is helpful to enhance the NO adsorption and reduce energy barrier of the rate-determining step (*NO to *NOH), thereby accelerating the catalytic reaction. To simultaneously realize NO exhaust gas removal, NH3 green synthesis, and electricity output, a Zn-NO battery with Cu@Co cathode is assembled with a power density of 3.08 mW cm-2 and an NH3 yield of 273.37 µg h-1 cm-2 .

One-step nitrogen defect engineering of polymeric carbon nitride for visible light-driven photocatalytic O2 reduction to H2O2.

Polymeric carbon nitride (PCN) is an important metal-free photocatalyst for visible light-driven hydrogen peroxide (H2O2) production from O2 reduction. Herein, we synthesized the DPCN catalysts possessing nitrogen defects by one-step thermal polymerization of urea in N2 stream. As compared to the PCN conventionally synthesized in static air, X-ray photoelectrons spectroscopy (XPS) characterization disclosed that there are more pyridinic N defects in the DPCN catalysts, which is attributed to the removal of a proportion of NH3 released from urea pyrolysis by flowing N2. UV-vis diffuse reflectance spectroscopy (UV-vis DRS), Mott-Schottky, steady-state and time-resolved photoluminescence (PL), and electrochemical impedance spectroscopy (EIS) characterizations revealed that the introduction of the nitrogen defects narrows down the band gap, improves the density of the photoexcited charge carriers, prolongs the lifetime of the charge carriers, and enhances the charge transfer efficiency. In visible light-driven photocatalytic O2 reduction to H2O2, the optimal DPCN catalyst afforded an activity of 4.35 times that of the PCN catalyst and a H2O2 concentration of 2.83 mmol L-1 after 10 h of visible light irradiation. This one-step thermal polymerization approach is valid when replacing N2 stream with Ar and He streams.

Broadening AIEgen application: rapid and portable sensing of foodstuff hazards in deep-frying oil.

Development of fluorescent probes that can monitor foodstuff hazards is highly desirable. Herein we report the first example of an AIEgen probe (QM-TPA), conjugated by a quinoline-malononitrile (QM) scaffold and triphenylamine unit, for direct sensing of triacylglycerol polymers in frying oil, enabling a rapid probing, on-site analysis, and portable operation in food inspection applications.

Self-Assembly of a Monochromophore-Based Polymer Enables Unprecedented Ratiometric Tracing of Hypoxia.

The accuracy of traditional bischromophore-based ratiometric probes is always compromised by undesirable energy/charge transferring interactions between the internal reference moiety and the sensing chromophore. In this regard, ratiometric sensing with a monochromophore system is highly desirable. Herein, an unprecedented monochromophore-based ratiometric probe, which consists of a hydrophilic backbone poly(N-vinylpyrrolidone) (PVP) and single chromophore of platinum(II) tetraphenylporphyrin (Pt-TPP) is reported. Combination of the specific assembled clustering-triggered fluorescent emission (oxygen-insensitive) with the original Pt-TPP phosphorescence (oxygen-sensitive) enables successful construction of a monochromophore-based ratiometric nanosensor for directly tracing hypoxia in vivo, along with the preferable facilitation of enhanced permeation and retention effect and long excitation wavelength. The unique ratiometric signals enable the direct observation from normoxic to hypoxic environment in both living A549 cells and a tumor-bearing mice model, providing a significant paradigm of a monochromophore-based dual-emissive system with the specific assembled cluster emission. The work satisfactorily demonstrates a valuable strategy for designing monochromophore-based dual-emissive materials, and validates its utility for in vivo ratiometric biological sensing without the common energy/charge interference in bischromophore-based system.

An enzyme-activatable probe liberating AIEgens: on-site sensing and long-term tracking of ß-galactosidase in ovarian cancer cells.

Development of fluorescent probes for on-site sensing and long-term tracking of specific biomarkers is particularly desirable for the early detection of diseases. However, available small-molecule probes tend to facilely diffuse across the cell membrane or remain at the activation site but always suffer from the aggregation-caused quenching (ACQ) effect. Here we report an enzyme-activatable aggregation-induced emission (AIE) probe QM-ßgal, which is composed of a hydrophilic ß-galactosidase (ß-gal)-triggered galactose moiety and a hydrophobic AIE-active fluorophore QM-OH. The probe is virtually non-emissive in aqueous media, but when activated by ß-gal, specific enzymatic turnover would liberate hydrophobic AIE luminogen (AIEgen) QM-OH, and then highly fluorescent nanoaggregates are in situ generated as a result of the AIE process, allowing for on-site sensing of endogenous ß-gal activity in living cells. Notably, taking advantage of the improved intracellular retention of nanoaggregates, we further exemplify QM-ßgal for long-term (∼12 h) visualization of ß-gal-overexpressing ovarian cancer cells with high fidelity, which is essential for biomedicine and diagnostics. Thus, this enzyme-activatable AIE probe not only is a potent tool for elucidating the roles of ß-gal in biological systems, but also offers an enzyme-regulated liberation strategy to exploit multifunctional probes for preclinical applications.

Ultrathin g-C3N4 with enriched surface carbon vacancies enables highly efficient photocatalytic nitrogen fixation.

An ultra-thin carbon nitride with loose structure and more carbon defects on the surface was achieved through high-temperature peeling methods. Its composition, morphological characteristics, surface defect types and electrochemical properties have been measured. After atomic scale structure control and surface defects construction, the photocatalytic activity of prepared g-C3N4-V for ammonia conversion from dinitrogen can be greatly improved in contrast with bulk g-C3N4. Under visible light irradiation, the defective g-C3N4-V can produce 54 µmol/L NH3 within 100 min without any cocatalyst and sacrificial agent. The relationship between morphology characteristics and activity of defective ultrathin g-C3N4 materials was analyzed in detail. Benefiting from thin layer structure and more surface carbon vacancies, the effective charge separation from both bulk and surface can be achieved. Notably, the engineered carbon vacancies greatly facilitate the adsorption and activation of dinitrogen molecule, extremely improving the nitrogen fixation activity for the defective ultrathin g-C3N4-V materials. This work affords novel insights into the design of photocatalyst with defective ultrathin structure towards nitrogen fixation.

Morphology Tuning of Aggregation-Induced Emission Probes by Flash Nanoprecipitation: Shape and Size Effects on in Vivo Imaging.

Aggregation-induced emission (AIE) imaging probes have recently received considerable attention because of their unique property of high performance in the aggregated state and their imaging capability. However, the tendency of AIE molecules to aggregate into micron long irregular shapes, which significantly limits their application in vivo, is becoming a serious issue that needs to be addressed. Here, we introduce a novel engineering strategy to tune the morphology and size of AIE nanoaggregates, based on flash nanoprecipitation (FNP). Quinolinemalononitrile (ED) is encapsulated inside properly selected amphiphilic block copolymers of varying concentration. This leads to a variety of ED particle morphologies with different sizes. The shape and size are found to have strong influences on tumor targeting both in vitro and in vivo. The current results therefore indicate that the FNP method together with optimal choice of an amphiphilic copolymer is a universal method to systematically control the aggregation state of AIE materials and hence tune the morphology and size of AIE nanoaggregates, which is potentially useful for precise imaging at specific tumor sites.

Double regulation of bismuth and halogen source for the preparation of bismuth oxybromide nanosquares with enhanced photocatalytic activity.

In this paper, bismuth oxybromide (BiOBr) nanosquares photocatalysts were synthesized via a facile hydrothermal method with the double regulation of the ionic liquid (IL) 1-hexadecyl-3-methylimidazolium bromide and ammonium bismuth citrate (BCA). To the best of our knowledge, this report is the first to describe the BiOBr material with simultaneous bismuth and halogen bidirectional source regulation. The structures, components, morphologies, optical properties and photocatalytic properties of the as-prepared samples were specifically explored. The photocatalytic ability was assessed using the degradation of rhodamine B under visible light irradiation. The BiOBr-IL+BCA exhibited improved photocatalytic activity compared with the BiOBr materials without double regulation. The primary active species were determined to be holes (h+) and superoxide radicals (O2-) using electron spin resonance (ESR) analysis and free radical trapping experiments. This enhanced activity was attributed to its larger specific surface, the superior electron transfer ability, and the increased negative conduction band position, which favors the photogenerated electrons to trap the molecular oxygen to produce O2-. The production of more O2- can benefit the removal of pollutants.

GSH-Activated NIR Fluorescent Prodrug for Podophyllotoxin Delivery.

Theranostic prodrug therapy enables the targeted delivery of anticancer drugs with minimized adverse effects and real-time in situ monitoring of activation of the prodrugs. In this work, we report the synthesis and biological assessment of the near-infrared (NIR) prodrug DCM-S-PPT and its amphiphilic copolymer (mPEG-DSPE)-encapsulated nanoparticles. DCM-S-PPT is composed of podophyllotoxin (PPT) as the anticancer moiety and a dicyanomethylene-4H-pyran (DCM) derivative as the NIR fluorescent reporter, which are linked by a thiol-specific cleavable disulfide bond. In vitro experiments indicated that DCM-S-PPT has low cytotoxicity and that glutathione (GSH) can activate DCM-S-PPT resulting in PPT release and a concomitant significant enhancement in NIR fluorescence at 665 nm. After being intravenously injected into tumor-bearing nude mice, DCM-S-PPT exhibited excellent tumor-activated performance. Furthermore, we have demonstrated that mPEG-DSPE as a nanocarrier loaded with DCM-S-PPT (mPEG-DSPE/DCM-S-PPT) showed even greater tumor-targeting performance than DCM-S-PPT on account of the enhanced permeability and retention effect. Its tumor-targeting ability and specific drug release in tumors make DCM-S-PPT a promising prodrug that could provide a significant strategy for theranostic drug delivery systems.

In Situ Ratiometric Quantitative Tracing of Intracellular Leucine Aminopeptidase Activity via an Activatable Near-Infrared Fluorescent Probe.

Leucine aminopeptidase (LAP), one of the important proteolytic enzymes, is intertwined with the progress of many pathological disorders as a well-defined biomarker. To explore fluorescent aminopeptidase probe for quantitative detection of LAP distribution and dynamic changes, herein we report a LAP-targeting near-infrared (NIR) fluorescent probe (DCM-Leu) for ratiometric quantitative trapping of LAP activity in different kinds of living cells. DCM-Leu is composed of a NIR-emitting fluorophore (DCM) as a reporter and l-leucine as a triggered moiety, which are linked together by an amide bond specific for LAP cleavage. High contrast on the ratiometric NIR fluorescence signal can be achieved in response to LAP activity, thus enabling quantification of endogenous LAP with "build-in calibration" as well as minimal background interference. Its ratiometric NIR signal can be blocked in a dose-dependent manner by bestatin, an LAP inhibitor, indicating that the alteration of endogenous LAP activity results in these obviously fluorescent signal responses. It is worth noting that DCM-Leu features striking characteristics such as a large Stokes shift (∼205 nm), superior selectivity, and strong photostability responding to LAP. Impressively, not only did we successfully exemplify DCM-Leu in situ ratiometric trapping and quantification of endogenous LAP activity in various types of living cells, but also, with the aid of three-dimensional confocal imaging, the intracellular LAP distribution is clearly observed from different perspectives for the first time, owing to the high signal-to-noise of ratiometric NIR fluorescent response. Collectively, these results demonstrate preclinical potential value of DCM-Leu serving as a useful NIR fluorescent probe for early detection of LAP-associated disease and screening inhibitor.