RESUMEN
Calcium phosphate cements, primarily brushite cements, require the addition of setting retarders to ensure adequate processing time and processability. So far, citric acid has been the primary setting retarder used in this context. Due to the poor biocompatibility, it is crucial to explore alternative options for better processing. In recent years, the setting retarder phytic acid (IP6) has been increasingly investigated. This study investigates the biological behaviour of calcium phosphate cements with varying concentrations of IP6, in addition to their physical properties. Therefore cytocompatibility in vitro testing was performed using osteoblastic (MG-63) and osteoclastic (RAW 264.7 differentiated with RANKL) cells. We could demonstrate that the physical properties like the compressive strength of specimens formed with IP6 (brushite_IP6_5 = 11.2 MPa) were improved compared to the reference (brushite = 9.8 MPa). In osteoblast and osteoclast assays, IP6 exhibited significantly better cytocompatibility in terms of cell activity and cell number for brushite cements up to 11 times compared to the brushite reference. In contrast, the calcium-deficient hydroxyapatite (CDHA) cements produced similar results for IP6 (CDHA_IP6_0.25 = 27.0 MPa) when compared to their reference (CDHA = 21.2 MPa). Interestingly, lower doses of IP6 were found to be more effective than higher doses with up to 3 times higher. Additionally, IP6 significantly increased degradation in both passive and active resorption. For these reasons, IP6 is emerging as a strong new competitor to established setting retarders such as citric acid. These cements have potential applications in bone augmentation, the stabilisation of non-load bearing fractures (craniofacial), or the cementation of metal implants.
Asunto(s)
Cementos para Huesos , Fosfatos de Calcio , Ensayo de Materiales , Osteoblastos , Osteoclastos , Ácido Fítico , Ácido Fítico/química , Animales , Fosfatos de Calcio/química , Ratones , Cementos para Huesos/química , Osteoblastos/efectos de los fármacos , Osteoblastos/citología , Células RAW 264.7 , Humanos , Osteoclastos/efectos de los fármacos , Fuerza Compresiva , Materiales Biocompatibles/química , Durapatita/químicaRESUMEN
Since Otto Warburg reported in 1924 that cancer cells address their increased energy requirement through a massive intake of glucose, the cellular energy level has offered a therapeutic anticancer strategy. Methionine restriction (MetR) is one of the most effective approaches for inducing low-energy metabolism (LEM) due to the central position in metabolism of this amino acid. However, no simple in vitro system for the rapid analysis of MetR is currently available, and this study establishes the murine cell line L929 as such a model system. L929 cells react rapidly and efficiently to MetR, and the analysis of more than 150 different metabolites belonging to different classes (amino acids, urea and tricarboxylic acid cycle (TCA) cycles, carbohydrates, etc.) by liquid chromatography/mass spectrometry (LC/MS) defines a metabolic fingerprint and enables the identification of specific metabolites representing normal or MetR conditions. The system facilitates the rapid and efficient testing of potential cancer therapeutic metabolic targets. To date, MS studies of MetR have been performed using organisms and yeast, and the current LC/MS analysis of the intra- and extracellular metabolites in the murine cell line L929 over a period of 5 days thus provides new insights into the effects of MetR at the cellular metabolic level.
Asunto(s)
Fibroblastos/metabolismo , Metionina/metabolismo , Animales , Muerte Celular , Línea Celular , Proliferación Celular , Ligandos , Metaboloma , Ratones , Factor de Necrosis Tumoral alfa/metabolismoRESUMEN
BACKGROUND: This study investigated whether patient-specific condylar positioning devices (CPDs) are beneficial compared to the conventional manual positioning of the condyles. METHODS: In this prospective, randomized trial, patients undergoing orthognathic surgery with a bilateral sagittal split osteotomy of the mandible were included. The ascending ramus was positioned with computer-aided designed and computer-aided manufactured (CAD/CAM) patient-specific devices in the CPD group and manually in the control group. Postoperatively, cone-beam computed tomography (CBCT) was performed to align the virtually planned position with the postoperative result. RESULTS: Thirty patients were enrolled in the study, with 14 randomized to the CPD group and 16 to the control group. In the CPD group, the ascending ramus differed in the postoperative CBCT scan from the virtually planned position by 0.8 mm in the left/right, 0.8 mm in the front/back, and 1.3 mm in the cranial/caudal direction. The corresponding control-group values were 1.1 mm, 1.3 mm, and 1.6 mm. CPD and controls differed significantly for the left/right movement of the rami (p = 0.04) but not for the other directions or rotations (p > 0.05). CONCLUSIONS: The results demonstrate that both methods are accurate, and postoperative results matched the virtually planned position precisely. It can be assumed that the described CPDs are beneficial when a condylar position different from the preoperative is desired.
RESUMEN
The aim of this study was to investigate the jawbone concentration of clindamycin (CLI) in patients with an osteonecrosis of the jaw (ONJ). Patients with medication-related ONJ (MRONJ) and osteoradionecrosis (ORN) with an antibiotic treatment with CLI were included. Plasma, vital and necrotic bone samples were collected. Plasma and jawbone samples were analyzed by liquid chromatography-tandem mass spectrometry. Patients with MRONJ exhibited a mean plasma CLI concentration of 9.6 µg/mL (SD ± 3.6 µg/mL) and mean concentrations of 2.3 µg/g CLI (SD ± 1.4 µg/g) and 2.1 µg/g CLI (SD ± 2.4 µg/g) in vital and necrotic bone samples, without statistical significance (p = 0.79). In patients with ORN, mean concentration in plasma was 12.0 µg/mL (SD ± 2.6 µg/mL), in vital bone 2.1 µg/g (SD ± 1.5 µg/g), and in necrotic bone 1.7 µg/g (SD ± 1.2 µg/g). Vital and necrotic bone concentrations did not differ significantly (p = 0.88). The results demonstrate that CLI concentrations are considerably lower than in plasma, but sufficient for most bacteria present in ONJ. Within the limitations of the study, it seems that CLI is a relevant alternative to other antibiotics in the treatment of ONJ because it reaches adequate concentrations in jawbone.
Asunto(s)
Osteonecrosis de los Maxilares Asociada a Difosfonatos , Conservadores de la Densidad Ósea , Osteonecrosis , Osteorradionecrosis , Humanos , Clindamicina/uso terapéutico , Estudios Prospectivos , Osteonecrosis/inducido químicamente , Osteorradionecrosis/etiología , Maxilares , Osteonecrosis de los Maxilares Asociada a Difosfonatos/etiología , DifosfonatosRESUMEN
Bone defects resulting from trauma, diseases, or surgical procedures pose significant challenges in the field of oral and maxillofacial surgery. The development of effective bone substitute materials that promote bone healing and regeneration is crucial for successful clinical outcomes. Calcium phosphate cements (CPCs) have emerged as promising candidates for bone replacement due to their biocompatibility, bioactivity, and ability to integrate with host tissues. However, there is a continuous demand for further improvements in the mechanical properties, biodegradability, and bioactivity of these materials. Dual setting of cements is one way to improve the performance of CPCs. Therefore, silicate matrices can be incorporated in these cements. Silicate-based materials have shown great potential in various biomedical applications, including tissue engineering and drug delivery systems. In the context of bone regeneration, silicate matrices offer unique advantages such as improved mechanical stability, controlled release of bioactive ions, and enhanced cellular responses. Comprehensive assessments of both the material properties and biological responses of our samples were conducted. Cytocompatibility was assessed through in vitro testing using osteoblastic (MG-63) and osteoclastic (RAW 264.7) cell lines. Cell activity on the surfaces was quantified, and scanning electron microscopy (SEM) was employed to capture images of the RAW cells. In our study, incorporation of tetraethyl orthosilicate (TEOS) in dual-curing cements significantly enhanced physical properties, attributed to increased crosslinking density and reduced pore size. Higher alkoxysilyl group concentration improved biocompatibility by facilitating greater crosslinking. Additionally, our findings suggest citrate's potential as an alternative retarder due to its positive interaction with the silicate matrix, offering insights for future dental material research. This paper aims to provide an overview of the importance of silicate matrices as modifiers for calcium phosphate cements, focusing on their impact on the mechanical properties, setting behaviour, and biocompatibility of the resulting composites.
RESUMEN
Background: Medical resource management can be improved by assessing the likelihood of prolonged length of stay (LOS) for head and neck cancer surgery patients. The objective of this study was to develop predictive models that could be used to determine whether a patient's LOS after cancer surgery falls within the normal range of the cohort. Methods: We conducted a retrospective analysis of a dataset consisting of 300 consecutive patients who underwent head and neck cancer surgery between 2017 and 2022 at a single university medical center. Prolonged LOS was defined as LOS exceeding the 75th percentile of the cohort. Feature importance analysis was performed to evaluate the most important predictors for prolonged LOS. We then constructed 7 machine learning and deep learning algorithms for the prediction modeling of prolonged LOS. Results: The algorithms reached accuracy values of 75.40 (radial basis function neural network) to 97.92 (Random Trees) for the training set and 64.90 (multilayer perceptron neural network) to 84.14 (Random Trees) for the testing set. The leading parameters predicting prolonged LOS were operation time, ischemia time, the graft used, the ASA score, the intensive care stay, and the pathological stages. The results revealed that patients who had a higher number of harvested lymph nodes (LN) had a lower probability of recurrence but also a greater LOS. However, patients with prolonged LOS were also at greater risk of recurrence, particularly when fewer (LN) were extracted. Further, LOS was more strongly correlated with the overall number of extracted lymph nodes than with the number of positive lymph nodes or the ratio of positive to overall extracted lymph nodes, indicating that particularly unnecessary lymph node extraction might be associated with prolonged LOS. Conclusions: The results emphasize the need for a closer follow-up of patients who experience prolonged LOS. Prospective trials are warranted to validate the present results.
RESUMEN
Objective: This study aims to critically evaluate the effectiveness and accuracy of a time safing and cost-efficient open-source algorithm for in-house planning of mandibular reconstructions using the free osteocutaneous fibula graft. The evaluation focuses on quantifying anatomical accuracy and assessing the impact on ischemia time. Methods: A pilot study was conducted, including patients who underwent in-house planned computer-aided design and manufacturing (CAD/CAM) of free fibula flaps between 2021 and 2023. Out of all patient cases, we included all with postoperative 3D imaging in the study. The study utilized open-source software tools for the planning step, and three-dimensional (3D) printing techniques. The Hausdorff distance and Dice coefficient metrics were used to evaluate the accuracy of the planning procedure. Results: The study assessed eight patients (five males and three females, mean age 61.75 ± 3.69 years) with different diagnoses such as osteoradionecrosis and oral squamous cell carcinoma. The average ischemia time was 68.38 ± 27.95â min. For the evaluation of preoperative planning vs. the postoperative outcome, the mean Hausdorff Distance was 1.22 ± 0.40. The Dice Coefficients yielded a mean of 0.77 ± 0.07, suggesting a satisfactory concordance between the planned and postoperative states. Dice Coefficient and Hausdorff Distance revealed significant correlations with ischemia time (Spearman's rho = -0.810, p = 0.015 and Spearman's rho = 0.762, p = 0.028, respectively). Linear regression models adjusting for disease type further substantiated these findings. Conclusions: The in-house planning algorithm not only achieved high anatomical accuracy, as reflected by the Dice Coefficients and Hausdorff Distance metrics, but this accuracy also exhibited a significant correlation with reduced ischemia time. This underlines the critical role of meticulous planning in surgical outcomes. Additionally, the algorithm's open-source nature renders it cost-efficient, easy to learn, and broadly applicable, offering promising avenues for enhancing both healthcare affordability and accessibility.
RESUMEN
Oroantral communication (OAC) is a common complication after tooth extraction of upper molars. Profound preoperative panoramic radiography analysis might potentially help predict OAC following tooth extraction. In this exploratory study, we evaluated n = 300 consecutive cases (100 OAC and 200 controls) and trained five machine learning algorithms (VGG16, InceptionV3, MobileNetV2, EfficientNet, and ResNet50) to predict OAC versus non-OAC (binary classification task) from the input images. Further, four oral and maxillofacial experts evaluated the respective panoramic radiography and determined performance metrics (accuracy, area under the curve (AUC), precision, recall, F1-score, and receiver operating characteristics curve) of all diagnostic approaches. Cohen's kappa was used to evaluate the agreement between expert evaluations. The deep learning algorithms reached high specificity (highest specificity 100% for InceptionV3) but low sensitivity (highest sensitivity 42.86% for MobileNetV2). The AUCs from VGG16, InceptionV3, MobileNetV2, EfficientNet, and ResNet50 were 0.53, 0.60, 0.67, 0.51, and 0.56, respectively. Expert 1-4 reached an AUC of 0.550, 0.629, 0.500, and 0.579, respectively. The specificity of the expert evaluations ranged from 51.74% to 95.02%, whereas sensitivity ranged from 14.14% to 59.60%. Cohen's kappa revealed a poor agreement for the oral and maxillofacial expert evaluations (Cohen's kappa: 0.1285). Overall, present data indicate that OAC cannot be sufficiently predicted from preoperative panoramic radiography. The false-negative rate, i.e., the rate of positive cases (OAC) missed by the deep learning algorithms, ranged from 57.14% to 95.24%. Surgeons should not solely rely on panoramic radiography when evaluating the probability of OAC occurrence. Clinical testing of OAC is warranted after each upper-molar tooth extraction.
RESUMEN
A number of cross-sectional epidemiological studies suggest that poor oral health is associated with respiratory diseases. However, the number of cases within the studies was limited, and the studies had different measurement conditions. By analyzing data from the National Health and Nutrition Examination Survey III (NHANES III), this study aimed to investigate possible associations between chronic obstructive pulmonary disease (COPD) and periodontitis in the general population. COPD was diagnosed in cases where FEV (1)/FVC ratio was below 70% (non-COPD versus COPD; binary classification task). We used unsupervised learning utilizing k-means clustering to identify clusters in the data. COPD classes were predicted with logistic regression, a random forest classifier, a stochastic gradient descent (SGD) classifier, k-nearest neighbors, a decision tree classifier, Gaussian naive Bayes (GaussianNB), support vector machines (SVM), a custom-made convolutional neural network (CNN), a multilayer perceptron artificial neural network (MLP), and a radial basis function neural network (RBNN) in Python. We calculated the accuracy of the prediction and the area under the curve (AUC). The most important predictors were determined using feature importance analysis. Results: Overall, 15,868 participants and 19 feature variables were included. Based on k-means clustering, the data were separated into two clusters that identified two risk characteristic groups of patients. The algorithms reached AUCs between 0.608 (DTC) and 0.953% (CNN) for the classification of COPD classes. Feature importance analysis of deep learning algorithms indicated that age and mean attachment loss were the most important features in predicting COPD. Conclusions: Data analysis of a large population showed that machine learning and deep learning algorithms could predict COPD cases based on demographics and oral health feature variables. This study indicates that periodontitis might be an important predictor of COPD. Further prospective studies examining the association between periodontitis and COPD are warranted to validate the present results.