Production of griseofulvin nanoparticles using supercritical CO(2) antisolvent with enhanced mass transfer.

Griseofulvin (GF) is a poor water soluble, antifungal agent. The bioavailability of the drug and its absorption from the gastrointestinal tract can be greatly improved by particle size reduction. In this work, supercritical antisolvent precipitation with enhanced mass transfer (SAS-EM) has been proposed for the production of GF nanoparticles. SAS-EM is a modification of the currently existing supercritical antisolvent (SAS) precipitation technique and also utilizes supercritical CO(2) as the antisolvent. In SAS-EM however, the solution jet is deflected by a surface vibrating at an ultrasonic frequency that atomizes the jet into small micro droplets. Further, the ultrasound field generated by the vibrating surface inside the supercritical media enhances mass transfer and prevents agglomeration due to increased mixing. GF nanoparticles of different sizes and morphologies have been obtained by varying the vibration intensity of the deflecting surface, which in turn is adjusted by changing the power supply to the attached ultrasound transducer. GF nanoparticles as low as 130 nm in size have been obtained corresponding to a power supply of 180 W. The effect of using different solvents on the size and morphology of the particles has also been studied.

Prevalence of initial drug resistance in tuberculosis patients attending a chest hospital.

Sputum samples from pulmonary tuberculosis patients attending a hospital for chest diseases and tuberculosis at Jaipur, India were directly subjected to sensitivity tests to detect drug resistance to streptomycin (S), isoniazid (I), rifampicin (R) and ethambutol (Emb) by slide culture technique. Drug resistance was observed to one or more drug in 19.9 per cent of the patients. I resistant organisms were present in 10.1 per cent of patients, S resistance in 7.6 per cent, R resistance in 3.0 per cent and Emb resistance in 2.6 per cent. Resistance was limited to a single drug in 16.7 per cent patients. Drug resistance was unrelated to age and sex of the patients.

Sonochemical reactions at 640 kHz using an efficient reactor. Oxidation of potassium iodide.

Ultrasound can be used to oxidize aqueous pollutants. However, due to economic reasons higher oxidation/destruction rates and higher energy efficiency are needed. Recent studies suggest that the higher ultrasound frequencies provide better oxidation rates than the conventional 20 kHz. Another area for improvement is reactor configuration. We have tested two new reactor configurations with proper focusing and reflection of ultrasound for maximum utilization. Reactor configuration plays an important role in the overall efficiency. In the new reactors, transducers and reaction mixture are separated by a polymer acoustic window which allows efficient transfer of ultrasound energy and not the heat from the transducer to the reaction mixture. One reactor at 640 kHz provides a 100% enhancement over the best reported rate for the oxidation of potassium iodide, on a per-Watt basis. Experiments conducted at varying initial KI concentrations show interesting behavior. Increasing the KI concentration by over eight fold merely increases the iodine production rate by two fold. This suggests that in the oxidation region surrounding the bubble, the KI concentration is much different than in the bulk. It is proposed that the hydrophobic bubble region has lower and near saturation KI concentration.

Formulation, characterization, and in vitro release of glyburide from proliposomal beads.

The objective of our study was to formulate and evaluate proliposomes in the form of enteric-coated beads using glyburide as a model drug. The beads were enteric coated with Eudragit L-100 by a fluidized bed coating process using triethyl citrate as plasticizer. Content uniformity of glyburide was estimated using HPLC analysis of beads dissolved in methanol. These proliposomal beads formed liposomes on disintegration in phosphate buffered saline (pH 7.4), which was confirmed by transmission electron microscopy. The dissolution study of enteric-coated beads exhibited enhanced dissolution compared with pure drug and a marketed product. Liposomes can be successfully prepared for oral administration in the form of enteric-coated beads that may offer a stable system to produce liposomes for oral administration.

Repeat open intracardiac operation--analysis of 55 patients.

Of the 4170 open intracardiac operations performed at our hospital in the last 6 years, 55 (1.3%) were reoperations. Of these failed valve repairs or valve substitutes formed the major group (58%) and the interval between first and second operation ranged from 6 months to 8 years. There were 4 deaths on table and another 6 patients died during their hospital stay giving an early mortality rate of 18 per cent. There was one late death during a follow-up period of 1 month to 3 years. There was no death due to perioperative bleeding complications. We conclude that it should now be possible to perform reoperations with an acceptable mortality and good late functional results.

Plasma insulin, growth hormone, and blood sugar during exercise in man.

Alterations in plasma immunoreactive insulin (IRI), human growth hormone (hGH) and blood glucose were studied in five male volunteers undergoing exercise for 20 min on a bicycle ergometer at 750 kpm/min. Plasma IRI and hGH levels before exercise were 4.42 +/- 1.35 micro U/ml (mean +/- SE) and 1.94 +/- 0.88 ng/ml respectively. A significant decrease (p less than 0.01) in plasma IRI was observed at 20 min postexercise and remained at lower levels upto 80 min of observations. hGH levels showed significant increase (p less than 0.05) to a mean value of 7.46 +/- 0.71 ng/ml at 20 min of exercise with a peak value of 16.0 +/- 5.04 ng/ml at 20 min postexercise. Sixty min after termination of exercise, hGH levels returned to pre-exercise values. Blood glucose rose progressively with the increase in the duration of exercise and peak levels were recorded at 20 min of exercise. Sixty min after termination of exercise, blood glucose levels returned to pre-exercise values. These observations suggest that exercise stress can lead to a physiological situation in which circulating insulin and glucose are not exclusively dependent on each other.

A study of pituitary-thyroid function during exercise in man.

Exercise induced modulations in circulatory T4, T3 and TSH were monitored in 14 healthy euthyroid male volunteers undergoing exercise on a bicycle ergometer at 750 KPM for 20 minutes. TSH response to 100 micrograms TRH was also studied in 4 exercising and 4 resting subjects. Serial blood samples were obtained before, during and after the exercise. Serum T4 exhibited a significant decrease (P less than 0.05) from 9.6 +/- 0.49 microgram/dl (mean +/- SE) to 8.3 +/- 0.47 microgram/dl at 20 min after the termination of the exercise, whereas a significant decrease (P less than 0.01) in T3 levels from 158 +/- 9 ng/dl to 144 +/- 8.2 ng/dl was recorded at 40 min after the termination of the exercise. The basal TSH levels as well as the sensitivity of the pituitary thyroid axis, monitored as overall TSH response, reflected by the sum of TSH values at different time intervals and the maximum rise over the basal levels (delta TSH) remained unaltered after exercise. These observations suggest that hormone secretion by the thyroid and its responsiveness to endogenous TSH are maintained after exercise. The decrease in circulatory T4 and T3 could be due to an increase in degradation of the hormones or may reflect a generalized adaptation phenomenon. The exact mechanism and significance of these alterations remains to be elucidated.

Effects of cyclodextrins on the flavor of goat milk and its yogurt.

UNLABELLED: Goat milk fat includes several branched chain fatty acids (BCFAs), like 4-methyloctanoic acid, which when free, are responsible for goaty flavor. This flavor limits the market opportunities for goat milk. Prior research showed that cyclodextrins (CDs) can reduce goaty flavor, presumably by binding free fatty acids. This research extends that observation. In odor ranking trials in citrate buffer at pH 4.8, ß-CD concentrations between 0% and 0.35% were increasingly effective in reducing odor intensity due to 4-methyloctanoic acid, but only when present in high molar excess. α-CD was also effective, but γ-CD was not. In lipase-treated goat milk only ß-CD was effective but at much lower molar excess, a difference potentially explained by several factors. One was that BCFAs bind to CDs in marked preference to their straight chain isomers. Displacement experiments with phenolphthalein disproved that hypothesis. The ability of ß-CD to reduce goaty flavor intensity extended to yogurt. An analytical panel showed that flavor of goat yogurt was reduced by addition of ß-CD, but only if added before heating and fermentation. A hedonic trial showed that consumers preferred unsweetened and sweet/vanilla-flavored goat yogurt more when ß-CD was included, P = 0.004 and 0.016, respectively. Males liked all yogurts more than females (P < 0.01), but there was a treatment × gender interaction (P = 0.016) for sweet/vanilla yogurt: sweet/vanilla masked the goaty flavor for males but not females. This results parallels previously demonstrated gender effects for sheepmeat flavor caused by BCFAs. PRACTICAL APPLICATION: ß-Cyclodextrin masks goaty flavor in yogurt, and with its GRAS status means it could be used in commercial goat yogurts and similar products so the real or perceived nutritional advantages of goat milk are not lost to goaty flavor.

Hybrid natural-synthetic chitosan resin: thermal and mechanical behavior.

Poly(methyl methacrylate) (PMMA) is one of the most commonly plastics used as dental-base material, due to its good biological compatibility and mechanical properties. Chitosan has wide application in chemical, biochemical and biomedical fields of research. In this work, chitosan (CTS) was functionalized with glycidyl methacrylate (GMA), to ease a further reaction with MMA. The resulting co-polymer was finally blended with PMMA and poly(butyl acrylate) PBA which works as a damper, the polymers were cured by UV to obtain the final resin. Characterization of UV-cured resins was carried out by thermal measurements, X-ray diffraction, atomic force microscopy (AFM), micro and nanoindentation, water absorption and elution in water. As a result a higher thermal stability of the final resin compared with the precursor co-polymer ((CTS-GMA)-g-PMMA) was obtained. The resin presented roughness in the nanometer scale and nanoparticles embedded in the acrylic matrix producing a tough material. However, XRD measurements show that all materials are in an amorphous state. Values of hardness and elastic modulus results were very near to those of the dentine. The results of elution in water of the tested resin samples show them as clinically acceptable as a dental base material.

A hypothetical study of populations under constant mortality and fertility.

PIP: 28 countries with different characteristics have been selected in order to observe the amount of time it takes for these different countries to reach stable age distributions. The individual populations by sex and age were projected for 150 years in 5-year intervals with the present constant mortality and fertility schedules by component method. Observations have been made by considering the following characteristics of population when it has acquired stability: age distribution; the rate of growth, birthrate, and mortality rate; the population change; the intrinsic rate of growth, birthrate and mortality rate; and approximate time taken to stabilize the population. The initial age distribution has a significant part in the amount of time it takes for a population to acquire stability, and its intrinsic rate of growth is mostly dependent upon the existing age distribution of that population. The time taken for a country's population to become stable depends upon the age distribution, fertility and mortality schedules at the beginning. It has been observed that countries having a higher intrinsic rate of growth take comparatively less time in acquiring stability than the countries having a lower intrinsic rate of growth. The mortality and fertility schedules of a country is another important phenomenon. The populations of the different countries at the point of stability were growing according to their rates of growth. No specific trend of population growth could be found among the groups of countries. Time taken for stabilizing the population is completely based upon age distributions, fertility and mortality schedules a particular country was having at the beginning. The range of time taken for different countries to acquire stability generally ranged from 100 to 135 years. Among the different countries the relationship for the time it takes to acquire stability has not been established. This is a hypothetical approach in order to obtain some idea as to how a population with different characteristics acts in the long run when some of its characteristics are assumed to be constant.^ieng

Conversion of glycine max seed agglutinins from nonspecific to anti-(A + B).

The seeds of glycine max contain agglutinins which are typically nonspecific in their reactivity. Our investigations show that the phytagglutinins in GM can be converted from nonspecific to anti-(A + B) after the lectin is absorbed with horse red cells. The anti-A and anti-B fractions can be further separated by suitably absorbing the lectin with human red cells. The lectin absorbed with horse red cells or with group-0 human red cells shows an A-stressed activity.

Production of multiple wheat-rye 1RS translocation stocks and genetic analysis of LMW subunits of glutenin and gliadins in wheats using these stocks.

A triple (1AL.1RS/1BL.1RS/1DL.1RS) and three double (1AL.1RS/1BL.1RS, 1AL.1RS/1DL.1RS, 1BL.1RS/1DL.1RS) wheat-rye 1RS translocation stocks were isolated from a segregating population using the Gli-1, Tri-1 and Sec-1 seed proteins as genetic markers. These stocks carried 42 chromosomes and formed the expected multivalents (frequency of 14-25%) at metaphase 1. They gave floret fertility ranging from 40-60%. These stocks were subsequently used to determine the genetic control of low-molecular-weight (LMW) glutenin subunits in 'Chinese Spring' and 'Gabo' by means of two-step one-dimensional SDS-PAGE. All of the B subunits and most of the C subunits of glutenin were shown to be controlled by genes on the short arms of group-1 chromosomes in these wheats. The other C subunits were not controlled by group-1 chromosomes. The triple translocation line served as a suitable third parent in producing test-cross seeds for studying the inheritance of the LMW glutenin subunits and gliadins in wheat cultivars, e.g. 'Chinese Spring' and 'Orca'. The segregation patterns of the LMW glutenin subunits in these cultivars revealed that the subunits were inherited in clusters and that their controlling genes (Glu-3) were tightly linked with those controlling gliadins (Gli-1). The LMW glutenin patterns d, d and e in 'Orca' segregated as alternatives to the patterns a, a and a in 'Chinese Spring' controlled by Glu-A3, Glu-B3 and Glu-D3 loci on chromosome arms 1AS, 1BS and 1DS, respectively, thus indicating that these patterns were controlled by allelic genes at these loci.