Unified momentum model for rotor aerodynamics across operating regimes.

Despite substantial growth in wind energy technology in recent decades, aerodynamic modeling of wind turbines relies on momentum models derived in the late 19th and early 20th centuries, which are well-known to break down under flow regimes in which wind turbines often operate. This gap in theoretical modeling for rotors that are misaligned with the inflow and also for high-thrust rotors has resulted in the development of numerous empirical corrections which are widely applied in textbooks, research articles, and open-source and industry design codes. This work reports a Unified Momentum Model to efficiently predict power production, thrust force, and wake dynamics of rotors under arbitrary inflow angles and thrust coefficients without empirical corrections. The Unified Momentum Model is additionally coupled with a blade element model to enable blade element momentum modeling predictions of wind turbines in high thrust coefficient and yaw misaligned states without using corrections for these states. This Unified Momentum Model can form a new basis for wind turbine modeling, design, and control tools from first principles and may enable further development of innovations necessary for increased wind production and reliability to respond to 21st century climate change challenges.

Wavelength-induced shedding frequency modulation of seal whisker inspired cylinders.

The spanwise undulated cylinder geometry inspired by seal whiskers has been shown to alter shedding frequency and reduce fluid forces significantly compared to smooth cylindrical geometry. Prior research has parameterized the whisker-inspired geometry and demonstrated the relevance of geometric variations on force reduction properties. Among the geometric parameters, undulation wavelength was identified as a significant contributor to forcing changes. To analyze the effect of undulation wavelength, a thorough investigation isolating changes in wavelength is performed to expand upon previous research that parameterized whisker-inspired geometry and the relevance of geometric variations on the force reduction properties. A set of five whisker-inspired models of varying wavelength are computationally simulated at a Reynolds number of 250 and compared with an equivalent aspect ratio smooth elliptical cylinder. Above a critical non-dimensional value, the undulation wavelength reduces the amplitude and frequency of vortex shedding accompanied by a reduction in oscillating lift force. Frequency shedding is tied to the creation of wavelength-dependent vortex structures which vary across the whisker span. These vortices produce distinct shedding modes in which the frequency and phase of downstream structures interact to decrease the oscillating lift forces on the whisker model with particular effectiveness around the wavelength values typically found in nature. The culmination of these location-based modes produces a complex and spanwise-dependent lift frequency spectra at those wavelengths exhibiting maximum force reduction. Understanding the mechanisms of unsteady force reduction and the relationship between undulation wavelength and frequency spectra is critical for the application of this geometry to vibration tuning and passive flow control for vortex-induced vibration (VIV) reduction.