RESUMEN
To improve the catalytic activity of 3d transition metal catalysts, redox-active ligands are a promising tool. These ligands influence the oxidation state of the metal center as well as the ground spin-state and make the experimental determination of both properties challenging. Therefore, first-principles calculations, in particular employing density functional theory with a proper choice of exchange-correlation (xc) functional, are crucial. Common xc functionals were tested on a simple class of metal complexes: homoleptic, octahedral tris(diimine) iron(II) complexes. The spin-state energy splittings for most of these complexes showed the expected linear dependence on the amount of exact exchange included in the xc functionals. Even though varying redox-activity affects the electronic structure of the complexes considerably, the sensitivity of the spin-state energetics to the exact exchange admixture is surprisingly small. For iron(II) complexes with highly redox-active ligands and for a broad range of ligands in the reduced tris(diimine) iron(I) complexes, self-consistent field convergence to local minima was observed, which differ from the global minimum in the redox state of the ligand. This may also result in convergence to a molecular structure that corresponds to an energetically higher-lying local minimum. One criterion to detect such behavior is a change in the sign of the slope for the dependence of the spin-state energy splittings on the amount of exact exchange. We discuss possible protocols for dealing with such artifacts in cases in which a large number of calculations makes checking by hand unfeasible.
RESUMEN
Hypophosphatasia (HPP) is an inherited, systemic disorder, caused by loss-of-function variants of the ALPL gene encoding the enzyme tissue non-specific alkaline phosphatase (TNSALP). HPP is characterized by low serum TNSALP concentrations associated with defective bone mineralization and increased fracture risk. Dental manifestations have been reported as the exclusive feature (odontohypophosphatasia) and in combination with skeletal complications. Enzyme replacement therapy (asfotase alfa) has been shown to improve respiratory insufficiency and skeletal complications in HPP patients, while its effects on dental status have been understudied to date. In this study, quantitative backscattered electron imaging (qBEI) and histological analysis were performed on teeth from two patients with infantile HPP before and during asfotase alfa treatment and compared to matched healthy control teeth. qBEI and histological methods revealed varying mineralization patterns in cementum and dentin with lower mineralization in HPP. Furthermore, a significantly higher repair cementum thickness was observed in HPP compared to control teeth. Comparison before and during treatment showed minor improvements in mineralization and histological parameters in the patient when normalized to matched control teeth. HPP induces heterogeneous effects on mineralization and morphology of the dental status. Short treatment with asfotase alfa slightly affects mineralization in cementum and dentin. Despite HPP being a rare disease, its mild form occurs at higher prevalence. This study is of high clinical relevance as it expands our knowledge of HPP and dental involvement. Furthermore, it contributes to the understanding of dental tissue treatment, which has hardly been studied so far.
Asunto(s)
Calcinosis , Hipofosfatasia , Desmineralización Dental , Humanos , Hipofosfatasia/complicaciones , Fosfatasa Alcalina/genética , Calcificación Fisiológica , Calcinosis/complicaciones , Desmineralización Dental/complicaciones , Desmineralización Dental/tratamiento farmacológicoRESUMEN
OBJECTIVES: Carriere Motion 3D™ appliance (CMA) represents a method for molar distalization and correction of class II malocclusion. The aim was to investigate the 3D effects of the CMA by superimposing digital models and cephalometric X-rays. MATERIALS AND METHODS: We retrospectively examined 16 patients treated with CMA in combination with class II elastics. We compared digitized models and cephalometric X-rays of records taken before therapy and after the removal of CMA. The records were superimposed to assess the skeletal and dentoalveolar changes. The results of the cephalometric X-ray analysis were compared to an untreated age- and gender-matched sample. RESULTS: Class II occlusion was corrected after 11.85 ± 4.70 months by 3.45 ± 2.33 mm. The average distalization of the upper first molars was 0.96 ± 0.80 mm. The analysis of the cephalometric X-rays confirmed a distalization of the upper first molars with distal tipping and revealed a mesialization of the lower first molars of 1.91 ± 1.72 mm. Importantly, CMA resulted in a mild correction of the skeletal class II relationship (ANB: - 0.71 ± 0.77°; Wits: - 1.99 ± 1.74 mm) and a protrusion of the lower incisors (2.94 ± 2.52°). Compared to the untreated control group, there was significant distalization of the upper first molars and canines with mesialization and extrusion of the lower first molars. CONCLUSION AND CLINICAL RELEVANCE: CMA is an efficient method for treating class II malocclusions. However, the class II correction is only partially caused by a distalization of the upper molars.
Asunto(s)
Maloclusión Clase II de Angle , Técnicas de Movimiento Dental , Humanos , Cefalometría/métodos , Maloclusión Clase II de Angle/diagnóstico por imagen , Maloclusión Clase II de Angle/terapia , Maxilar , Diseño de Aparato Ortodóncico , Estudios Retrospectivos , Imagenología TridimensionalRESUMEN
We report transport measurements on tunable single-molecule junctions of the organic perchlorotrityl radical molecule, contacted with gold electrodes at low temperature. The current-voltage characteristics of a subset of junctions shows zero-bias anomalies due to the Kondo effect and in addition elevated magnetoresistance (MR). Junctions without Kondo resonance reveal a much stronger MR. Furthermore, we show that the amplitude of the MR can be tuned by mechanically stretching the junction. On the basis of these findings, we attribute the high MR to an interference effect involving spin-dependent scattering at the metal-molecule interface and assign the Kondo effect to the unpaired spin located in the center of the molecule in asymmetric junctions.
RESUMEN
BACKGROUND: Mucopolysaccharidoses (MPS) are a group of rare metabolic diseases characterized by a wide spectrum of symptoms including progressive condylar resorption. AIM: The aim of this study was to quantify the severity of condylar involvement in MPS I individuals in comparison with a group of non-MPS individuals and to describe how condylar changes may vary among the different types of MPS. DESIGN: Fifty panoramic radiographs of MPS patients (13.4 ± 6.2 years) with MPS I (n = 14), MPS II (n = 2), MPS IV (n = 8) and MPS VI (n = 2) were compared with forty panoramic radiographs of non-MPS individuals. The severity of condylar resorption was evaluated using a qualitative score (grades 0-3) and using the ratio of condylar height to ramus height (CH: RH). RESULTS: All MPS I and VI individuals showed pronounced bilateral degenerative condylar resorption. In contrast, individuals with MPS II and IV exhibited heterogeneous findings. The quantification of condylar height to ramus height revealed that CH: RH was significantly decreased in MPS I as compared to that of non-MPS individuals (P < .001). In contrast, the CH: RH ratios of MPS II and IV showed great variability. CONCLUSION: Mucopolysaccharidoses subtypes differ with regard to the severity of condylar resorption.
Asunto(s)
Cóndilo Mandibular , Mucopolisacaridosis , Humanos , Cóndilo Mandibular/diagnóstico por imagen , Mucopolisacaridosis/diagnóstico por imagen , Radiografía PanorámicaRESUMEN
Single-molecule magnets exhibit magnetic bistabililties at the molecular level, making them promising for molecule-based spintronics due to high magnetic densities. The incorporation of SMM behavior and electrical conductivity in one compound is rare because these two physical properties often do not operate in the same temperature range, which further hinders their use in practical applications. Here we present an organic-inorganic molecular hybrid, ßâ³-(BEDO-TTF)3[Co(pdms)2]·(MeCN)(H2O)2 (BO3) (BEDO-TTF = bis(ethylenedioxy)tetrathiafulvalene and H2pdms = 1,2-bis(methanesulfonamido)benzene), which manifests both metallic conduction (electrical conductivity up to 1000 S cm-1 at 12 K under 2.0 gigapascal pressure) and SMM behavior in the temperature range 12-26 K for the first time.
RESUMEN
The metal-metal-bonded molecule [Bu4N][(HL)2Fe6(dmf)2] (Fe6) was previously shown to possess a thermally isolated spin S = 19/2 ground state and found to exhibit slow magnetization relaxation below a blocking temperature of â¼5 K [J. Am. Chem. Soc. 2015, 137, 13949-13956]. Here, we present a comprehensive spectroscopic investigation of this unique single-molecule magnet (SMM), combining ultrawideband field-swept high-field electron paramagnetic resonance (EPR) with frequency-domain Fourier-transform terahertz EPR to accurately quantify the spin Hamiltonian parameters of Fe6. Of particular importance is the near absence of a 4th-order axial zero-field splitting term, which is known to arise because of quantum mechanical mixing of spin states on account of the relatively weak spin-spin (superexchange) interactions in traditional polynuclear SMMs such as the celebrated Mn12-acetate. The combined high-resolution measurements on both powder samples and an oriented single crystal provide a quantitative measure of the isolated nature of the spin ground state in the Fe6 molecule, as well as additional microscopic insights into factors that govern the quantum tunneling of its magnetization. This work suggests strategies for improving the performance of polynuclear SMMs featuring direct metal-metal bonds and strong ferromagnetic spin-spin (exchange) interactions.
RESUMEN
Hybridization functions are an established tool for investigating the coupling between a correlated subsystem (often a single transition metal atom) and its uncorrelated environment (the substrate and any ligands present). The hybridization function can provide valuable insight into why and how strong correlation features such as the Kondo effect can be chemically controlled in certain molecular adsorbates. To deepen this insight, we introduce a local decomposition of the hybridization function, based on a truncated cluster approach, enabling us to study individual effects on this function coming from specific parts of the systems (e.g., the surface, ligands, or parts of larger ligands). It is shown that a truncated-cluster approach can reproduce the Co 3d and Mn 3d hybridization functions from periodic boundary conditions in Co(CO)4/Cu(001) and MnPc/Ag(001) qualitatively well. By locally decomposing the hybridization functions, it is demonstrated at which energies the transition metal atoms are mainly hybridized with the substrate or with the ligand. For the Kondo-active 3dx2-y2 orbital in Co(CO)4/Cu(001), the hybridization function at the Fermi energy is substrate-dominated, so we can assign its enhancement compared with ligand-free Co to an indirect effect of ligand-substrate interactions. In MnPc/Ag(001), the same is true for the Kondo-active orbital, but for two other orbitals, there are both direct and indirect effects of the ligand, together resulting in such strong screening that their potential Kondo activity is suppressed. A local decomposition of hybridization functions could also be useful in other areas, such as analyzing the electrode self-energies in molecular junctions.
RESUMEN
Heisenberg exchange spin coupling between metal centers is essential for describing and understanding the electronic structure of many molecular catalysts, metalloenzymes, and molecular magnets for potential application in information technology. We explore the machine-learnability of exchange spin coupling beyond linear regression, which has not been studied yet. We employ Gaussian process regression, since it can potentially deal with small training sets (as likely associated with the rather complex molecular structures required for exploring spin coupling) and since it provides uncertainty estimates ("error bars") along with predicted values. We compare a range of descriptors and kernels for 257 small dicopper complexes and find that a simple descriptor based on chemical intuition, consisting only of copper-bridge angles and copper-copper distances, clearly outperforms several more sophisticated descriptors when it comes to extrapolating toward larger experimentally relevant complexes. Exchange spin coupling is similarly easy to learn as the polarizability, while learning dipole moments is much harder. The strength of the sophisticated descriptors lies in their ability to linearize structure-property relationships, to the point that a simple linear ridge regression performs just as well as the kernel-based machine-learning model for our small dicopper data set. The superior extrapolation performance of the simple descriptor is unique to exchange spin coupling, reinforcing the crucial role of choosing a suitable descriptor and highlighting the interesting question of the role of chemical intuition vs systematic or automated selection of features for machine learning in chemistry and material science.
RESUMEN
Pinching molecules via chemical strain suggests intuitive consequences, such as compression at the pinched site and clothespin-like opening of other parts of the structure. If this opening affects two spin centers, it should result in reduced communication between them. We show that for naphthalene-bridged biscobaltocenes with competing through-space and through-bond pathways, the consequences of pinching are far less intuitive: despite the known dominance of through-space interactions, the bridge plays a much larger role for exchange spin coupling than previously assumed. Based on a combination of chemical synthesis, structural, magnetic, and redox characterization, and a newly developed theoretical pathway analysis, we can suggest a comprehensive explanation for this non-intuitive behavior. These results are of interest for molecular spintronics, as naphthalene-linked cobaltocenes can form wires on surfaces for potential spin-only information transfer.
RESUMEN
A reliable first-principles description of singlet diradical character is essential for predicting nonlinear optical and magnetic properties of molecules. As diradical and closed-shell electronic structures differ in their distribution of single, double, triple, and aromatic bonds, modeling electronic diradical character requires accurate bond-length patterns, in addition to accurate absolute bond lengths. We therefore introduce structural diradical character, which we suggest as an additional measure for comparing first-principles calculations with experimental data. We employ this measure to identify suitable exchange-correlation functionals for predicting the bond length patterns and electronic diradical character of a biscobaltocene with the potential for photoswitchable nonlinear optical activity. Out of four popular approximate exchange-correlation functionals with different exact-exchange admixtures (BP86, TPSS, B3LYP, TPSSh), the two hybrid functionals TPSSh and B3LYP perform best for diradical bond length patterns, with TPSSh being best for the organometallic validation systems and B3LYP for the organic ones (for which the D3 dispersion correction was included). Still, none of the functionals is suitable for correctly describing relative bond lengths across the range of molecules studied, so that none can be recommended for predictive studies of (potential) diradicals without reservation. © 2018 Wiley Periodicals, Inc.
RESUMEN
Electronic communication through molecular bridges is important for different types of experiments, such as single-molecule conductance, electron transfer, superexchange spin coupling, and intramolecular singlet fission. In many instances, the chemical structure of the bridge determines how the two parts it is connecting communicate, and does so in ways that are transferable between these different manifestations (for example, high conductance often correlates with strong antiferromagnetic spin coupling, and low conductance due to destructive quantum interference correlates with ferromagnetic coupling). Defining electronic communication as a transferable property of the bridge can help transfer knowledge between these different areas of research. Examples and limits of such transferability are discussed here, along with some possible directions for future research, such as employing spin-coupled and mixed-valence systems as structurally well-controlled proxies for understanding molecular conductance and for validating first-principles theoretical methodologies, building conceptual understanding for the growing experimental work on intramolecular singlet fission, and developing measures for the transferability of electronic communication as a bridge property.
RESUMEN
Understanding (super-)exchange coupling between local spins is an important task in theoretical chemistry and solid-state physics. We show that a Green's-function approach introduced earlier (Liechtenstein et al., J. Phys. F 1984, 14, L125; Steenbock et al., J. Chem. Theory Comput. 2015, 11, 5651) can be used for analyzing exchange coupling pathways in an automated fashion rather than by visual inspection of molecular orbitals. We demonstrate the capabilities of this approach by comparing it to previously published pathway analyses for hydroxy-bridged dinuclear copper complexes and an oxo-bridged dinuclear manganese complex, and employ it for discriminating between through-space and through-bond pathways in a naphthalene-bridged bisnickelocene complex. © 2017 Wiley Periodicals, Inc.
RESUMEN
The prediction of magnetic behavior is important for the design of new magnetic materials. Kohn-Sham density functional theory is popular for this purpose, although one should be careful about choosing the right exchange-correlation functional. Here, we perform a statistical analysis to test different range-separated hybrid density functionals for the calculation of magnetic exchange coupling constants J of fourteen organic diradicals. Our analysis suggests that in absolute terms the MN12SX functional performs best among the series of twelve functionals studied here (including the popular B3LYP), followed by N12SX functionals along with Scuseria's HSE series of functionals. LC- ωPBE was found to be the least accurate, which is in contrast with its good performance for calculating J for transition metal complexes. The HSE family of functionals and B3LYP are the only functionals to reproduce the qualitative trends of the coupling constants correctly for the ferromagnetically coupled diradicals under study. © 2017 Wiley Periodicals, Inc.
RESUMEN
Because of their potential for chemical functionalization, carbon nanotubes (CNTs) are promising candidates for the development of devices such as nanoscale sensors or transistors with novel gating mechanisms. However, the mechanisms underlying the property changes due to functionalization of CNTs still remain subject to debate. Our goal is to reliably model one possible mechanism for such chemical gating: adsorption directly on the nanotubes. Within a Kohn-Sham density functional theory framework, such systems would ideally be described using periodic boundary conditions. Truncating the tube and saturating the edges in practice often offers a broader selection of approximate exchange-correlation functionals and analysis methods. By comparing the two approaches systematically for NH3 and NO2 adsorbates on semiconducting and metallic CNTs, we find that while structural properties are less sensitive to the details of the model, local properties of the adsorbate may be as sensitive to truncation as they are to the choice of exchange-correlation functional, and are similarly challenging to compute as adsorption energies. This suggests that these adsorbate effects are nonlocal. © 2017 Wiley Periodicals, Inc.
RESUMEN
Attaching an organometallic unit to a dithienylethene (DTE) molecular switch can allow one to vary its switching and spectroscopic properties, and to create switchable magnetic properties. In this work, two different dithienylethene molecular switches are used as a bridge between two cobalt sandwich units. The only difference between the switching cores is in the size of the cycloalkene ring connecting both thiophene rings. The complexes present different oxidation states for the cobalt atoms, which are demonstrated to determine the switching reaction. The UV/Vis measurements show that while the Co(I) complexes undergo the switching reaction, the Co(II,III) complexes switch poorly. Kohn-Sham density functional theory calculations indicate diabatic ring-closure mechanisms and a large number of excited states hindering the cyclization reaction and favoring the relaxation to the open form of the molecular switch.
RESUMEN
Increasing interactions between spin centers in molecules and molecular materials is a desirable goal for applications such as single-molecule magnets for information storage or magnetic metal-organic frameworks for adsorptive separation and targeted drug delivery and release. To maximize these interactions, introducing unpaired spins on bridging ligands is a concept used in several areas where such interactions are otherwise quite weak, in particular, lanthanide-based molecular magnets and magnetic metal-organic frameworks. Here, we use Kohn-Sham density functional theory to study how much the ground spin state is stabilized relative to other low-lying spin states by creating an additional spin center on the bridge for a series of simple model compounds. The di- and triradical structures consist of nitronyl nitroxide (NNO) and semiquinone (SQ) radicals attached to a meta-phenylene(R) bridge (where R = -NHâ¢/-NH2, -Oâ¢/OH, -CH2â¢/CH2). These model compounds are based on a fully characterized SQ-meta-phenylene-NNO diradical with moderately strong antiferromagnetic coupling. Replacing closed-shell substituents CH3 and NH2 with their radical counterparts CH2⢠and NH⢠leads to an increase in stabilization of the ground state with respect to other low-lying spin states by a factor of 3-6, depending on the exchange-correlation functional. For OH compared with O⢠substituents, no conclusions can be drawn as the spin state energetics depend strongly on the functional. This could provide a basis for constructing sensitive test systems for benchmarking theoretical methods for spin state energy splittings. Reassuringly, the stabilization found for a potentially synthesizable complex (up to a factor of 3.5) is in line with the simple model systems (where a stabilization of up to a factor of 6.2 was found). Absolute spin state energy splittings are considerably smaller for the potentially stable system than those for the model complexes, which points to a dependence on the spin delocalization from the radical substituent on the bridge.
RESUMEN
Organic radicals are promising building blocks for molecular spintronics. Little is known about the role of unpaired electrons for electron transport at the single-molecule level. Here, we examine the impact of magnetic fields on electron transport in single oligo(p-phenyleneethynylene) (OPE)-based radical molecular junctions, which are formed with a mechanically controllable break-junction technique at a low temperature of 4.2 K. Surprisingly huge positive magnetoresistances (MRs) of 16 to 287% are visible for a magnetic field of 4 T, and the values are at least 1 order of magnitude larger than those of the analogous pristine OPE (2-4%). Rigorous analysis of the MR and of current-voltage and inelastic electron-tunneling spectroscopy measurements reveal an effective reduction of the electronic coupling between the current-carrying molecular orbital and the electrodes with increasing magnetic field. We suggest that the large MR for the single-radical molecular junctions might be ascribed to a loss of phase coherence of the charge carriers induced by the magnetic field. Although further investigations are required to reveal the mechanism underlying the strong MR, our findings provide a potential approach for tuning charge transport in metal-molecule junctions with organic radicals.
RESUMEN
Local dipole moments (i.e., dipole moments of atomic or molecular subsystems) are essential for understanding various phenomena in nanoscience, such as solvent effects on the conductance of single molecules in break junctions or the interaction between the tip and the adsorbate in atomic force microscopy. We introduce GenLocDip, a program for calculating and visualizing local dipole moments of molecular subsystems. GenLocDip currently uses the Atoms-In-Molecules (AIM) partitioning scheme and is interfaced to various AIM programs. This enables postprocessing of a variety of electronic structure output formats including cube and wavefunction files, and, in general, output from any other code capable of writing the electron density on a three-dimensional grid. It uses a modified version of Bader's and Laidig's approach for achieving origin-independence of local dipoles by referring to internal reference points which can (but do not need to be) bond critical points (BCPs). Furthermore, the code allows the export of critical points and local dipole moments into a POVray readable input format. It is particularly designed for fragments of large systems, for which no BCPs have been calculated for computational efficiency reasons, because large interfragment distances prevent their identification, or because a local partitioning scheme different from AIM was used. The program requires only minimal user input and is written in the Fortran90 programming language. To demonstrate the capabilities of the program, examples are given for covalently and non-covalently bound systems, in particular molecular adsorbates. © 2016 Wiley Periodicals, Inc.