Superconductivity in an infinite-layer nickelate.

The discovery of unconventional superconductivity in (La,Ba)2CuO4 (ref. 1) has motivated the study of compounds with similar crystal and electronic structure, with the aim of finding additional superconductors and understanding the origins of copper oxide superconductivity. Isostructural examples include bulk superconducting Sr2RuO4 (ref. 2) and surface-electron-doped Sr2IrO4, which exhibits spectroscopic signatures consistent with a superconducting gap3,4, although a zero-resistance state has not yet been observed. This approach has also led to the theoretical investigation of nickelates5,6, as well as thin-film heterostructures designed to host superconductivity. One such structure is the LaAlO3/LaNiO3 superlattice7-9, which has been recently proposed for the creation of an artificially layered nickelate heterostructure with a singly occupied [Formula: see text] band. The absence of superconductivity observed in previous related experiments has been attributed, at least in part, to incomplete polarization of the eg orbitals10. Here we report the observation of superconductivity in an infinite-layer nickelate that is isostructural to infinite-layer copper oxides11-13. Using soft-chemistry topotactic reduction14-20, NdNiO2 and Nd0.8Sr0.2NiO2 single-crystal thin films are synthesized by reducing the perovskite precursor phase. Whereas NdNiO2 exhibits a resistive upturn at low temperature, measurements of the resistivity, critical current density and magnetic-field response of Nd0.8Sr0.2NiO2 indicate a superconducting transition temperature of about 9 to 15 kelvin. Because this compound is a member of a series of reduced layered nickelate crystal structures21-23, these results suggest the possibility of a family of nickelate superconductors analogous to copper oxides24 and pnictides25.

Strain Gradient Elasticity in SrTiO3 Membranes: Bending versus Stretching.

Young's modulus determines the mechanical loads required to elastically stretch a material and also the loads required to bend it, given that bending stretches one surface while compressing the opposite one. Flexoelectric materials have the additional property of becoming electrically polarized when bent. The associated energy cost can additionally contribute to elasticity via strain gradients, particularly at small length scales where they are geometrically enhanced. Here, we present nanomechanical measurements of freely suspended SrTiO3 crystalline membrane drumheads. We observe an unexpected nonmonotonic thickness dependence of Young's modulus upon small deflections. Furthermore, the modulus inferred from a predominantly bending deformation is three times larger than that of a predominantly stretching deformation for membranes thinner than 20 nm. In this regime we extract a strain gradient elastic coupling of ∼2.2 µN, which could be used in new operational regimes of nanoelectro-mechanics.

Stabilization of Sr3Al2O6 Growth Templates for Ex Situ Synthesis of Freestanding Crystalline Oxide Membranes.

A new synthetic approach has recently been developed for the fabrication of freestanding crystalline perovskite oxide nanomembranes, which involves the epitaxial growth of a water-soluble sacrificial layer. By utilizing an ultrathin capping layer of SrTiO3, here we show that this sacrificial layer, as grown by pulsed laser deposition, can be stabilized in air and therefore be used as transferrable templates for ex situ epitaxial growth using other techniques. We find that the stability of these templates depends on the thickness of the capping layer. On these templates, freestanding superconducting SrTiO3 membranes were synthesized ex situ using molecular beam epitaxy, enabled by the lower growth temperature which preserves the sacrificial layer. This study paves the way for the synthesis of an expanded selection of freestanding oxide membranes and heterostructures with a wide variety of ex situ growth techniques.

Polaronic behavior in a weak-coupling superconductor.

The nature of superconductivity in the dilute semiconductor SrTiO3 has remained an open question for more than 50 y. The extremely low carrier densities ([Formula: see text]-[Formula: see text] cm-3) at which superconductivity occurs suggest an unconventional origin of superconductivity outside of the adiabatic limit on which the Bardeen-Cooper-Schrieffer (BCS) and Migdal-Eliashberg (ME) theories are based. We take advantage of a newly developed method for engineering band alignments at oxide interfaces and access the electronic structure of Nb-doped SrTiO3, using high-resolution tunneling spectroscopy. We observe strong coupling to the highest-energy longitudinal optic (LO) phonon branch and estimate the doping evolution of the dimensionless electron-phonon interaction strength ([Formula: see text]). Upon cooling below the superconducting transition temperature ([Formula: see text]), we observe a single superconducting gap corresponding to the weak-coupling limit of BCS theory, indicating an order of magnitude smaller coupling ([Formula: see text]). These results suggest that despite the strong normal state interaction with electrons, the highest LO phonon does not provide a dominant contribution to pairing. They further demonstrate that SrTiO3 is an ideal system to probe superconductivity over a wide range of carrier density, adiabatic parameter, and electron-phonon coupling strength.

Freestanding Oxide Ferroelectric Tunnel Junction Memories Transferred onto Silicon.

Crystalline oxide ferroelectric tunnel junctions enable persistent encoding of information in electric polarization, featuring nondestructive readout and scalability that can exceed current commercial high-speed, nonvolatile ferroelectric memories. However, the well-established fabrication of epitaxial devices on oxide substrates is difficult to adapt to silicon substrates for integration into complementary metal-oxide-semiconductor electronics. In this work, we report ferroelectric tunnel junctions based on 2.8 nm-thick BaTiO3 films grown epitaxially on SrTiO3 growth substrates, released, and relaminated onto silicon. The performance of the transferred devices is comparable to devices characterized on the oxide substrate, suggesting a viable route toward next-generation nonvolatile memories broadly integrable with different materials platforms.

Imaging and tuning polarity at SrTiO3 domain walls.

Electrostatic fields tune the ground state of interfaces between complex oxide materials. Electronic properties, such as conductivity and superconductivity, can be tuned and then used to create and control circuit elements and gate-defined devices. Here we show that naturally occurring twin boundaries, with properties that are different from their surrounding bulk, can tune the LaAlO3/SrTiO3 interface 2DEG at the nanoscale. In particular, SrTiO3 domain boundaries have the unusual distinction of remaining highly mobile down to low temperatures, and were recently suggested to be polar. Here we apply localized pressure to an individual SrTiO3 twin boundary and detect a change in LaAlO3/SrTiO3 interface current distribution. Our data directly confirm the existence of polarity at the twin boundaries, and demonstrate that they can serve as effective tunable gates. As the location of SrTiO3 domain walls can be controlled using external field stimuli, our findings suggest a novel approach to manipulate SrTiO3-based devices on the nanoscale.

Superconducting Tunneling Spectroscopy of Spin-Orbit Coupling and Orbital Depairing in Nb:SrTiO_{3}.

We have examined the intrinsic spin-orbit coupling and orbital depairing in thin films of Nb-doped SrTiO_{3} by superconducting tunneling spectroscopy. The orbital depairing is geometrically suppressed in the two-dimensional limit, enabling a quantitative evaluation of the Fermi level spin-orbit scattering using Maki's theory. The response of the superconducting gap under in-plane magnetic fields demonstrates short spin-orbit scattering times τ_{so}≤1.1 ps. Analysis of the orbital depairing indicates that the heavy electron band contributes significantly to pairing. These results suggest that the intrinsic spin-orbit scattering time in SrTiO_{3} is comparable to those associated with Rashba effects in SrTiO_{3} interfacial conducting layers and can be considered significant in all forms of superconductivity in SrTiO_{3}.

Synthesis of freestanding single-crystal perovskite films and heterostructures by etching of sacrificial water-soluble layers.

The ability to create and manipulate materials in two-dimensional (2D) form has repeatedly had transformative impact on science and technology. In parallel with the exfoliation and stacking of intrinsically layered crystals, atomic-scale thin film growth of complex materials has enabled the creation of artificial 2D heterostructures with novel functionality and emergent phenomena, as seen in perovskite heterostructures. However, separation of these layers from the growth substrate has proved challenging, limiting the manipulation capabilities of these heterostructures with respect to exfoliated materials. Here we present a general method to create freestanding perovskite membranes. The key is the epitaxial growth of water-soluble Sr 3Al 2O 6 on perovskite substrates, followed by in situ growth of films and heterostructures. Millimetre-size single-crystalline membranes are produced by etching the Sr 3Al 2O 6 layer in water, providing the opportunity to transfer them to arbitrary substrates and integrate them with heterostructures of semiconductors and layered compounds.

Dual-Gate Modulation of Carrier Density and Disorder in an Oxide Two-Dimensional Electron System.

Carrier density and disorder are two crucial parameters that control the properties of correlated two-dimensional electron systems. In order to disentangle their individual contributions to quantum phenomena, independent tuning of these two parameters is required. Here, by utilizing a hybrid liquid/solid electric dual-gate geometry acting on the conducting LaAlO3/SrTiO3 heterointerface, we obtain an additional degree of freedom to strongly modify the electron confinement profile and thus the strength of interfacial scattering, independent from the carrier density. A dual-gate controlled nonlinear Hall effect is a direct manifestation of this profile, which can be quantitatively understood by a Poisson-Schrödinger sub-band model. In particular, the large nonlinear dielectric response of SrTiO3 enables a very wide range of tunable density and disorder, far beyond that for conventional semiconductors. Our study provides a broad framework for understanding various reported phenomena at the LaAlO3/SrTiO3 interface.

Enhanced electrical transparency by ultrathin LaAlO3 insertion at oxide metal/semiconductor heterointerfaces.

We demonstrate that the electrical conductivity of metal/semiconductor oxide heterojunctions can be increased over 7 orders of magnitude by inserting an ultrathin layer of LaAlO3. This counterintuitive result, that an interfacial barrier can be driven transparent by inserting a wide-gap insulator, arises from the large internal electric field between the two polar LaAlO3 surfaces. This field modifies the effective band offset in the device, highlighting the ability to design the electrostatic boundary conditions with atomic precision.

Atomically engineered metal-insulator transition at the TiO2/LaAlO3 heterointerface.

We demonstrate that the atomic boundary conditions of simple binary oxides can be used to impart dramatic changes of state. By changing the substrate surface termination of LaAlO3 (001) from AlO2 to LaO, the room-temperature sheet conductance of anatase TiO2 films are increased by over 3 orders of magnitude, transforming the intrinsic insulating state to a high mobility metallic state, while maintaining excellent optical transparency.

Locally enhanced conductivity due to the tetragonal domain structure in LaAlO3/SrTiO3 heterointerfaces.

The ability to control materials properties through interface engineering is demonstrated by the appearance of conductivity at the interface of certain insulators, most famously the {001} interface of the band insulators LaAlO3 and TiO2-terminated SrTiO3 (STO; refs 1, 2). Transport and other measurements in this system show a plethora of diverse physical phenomena. To better understand the interface conductivity, we used scanning superconducting quantum interference device microscopy to image the magnetic field locally generated by current in an interface. At low temperature, we found that the current flowed in conductive narrow paths oriented along the crystallographic axes, embedded in a less conductive background. The configuration of these paths changed on thermal cycling above the STO cubic-to-tetragonal structural transition temperature, implying that the local conductivity is strongly modified by the STO tetragonal domain structure. The interplay between substrate domains and the interface provides an additional mechanism for understanding and controlling the behaviour of heterostructures.

Measurement of the femtosecond optical absorption of LaAlO3/SrTiO3 heterostructures: evidence for an extremely slow electron relaxation at the interface.

The photocarrier relaxation dynamics of an n-type LaAlO3/SrTiO3 heterointerface is investigated using femtosecond transient absorption (TA) spectroscopy at low temperatures. In both LaAlO3/SrTiO3 heterostructures and electron-doped SrTiO3 bulk crystals, the TA spectrum shows a Drude-like free carrier absorption immediately after excitation. In addition, a broad absorption band gradually appears within 40 ps, which corresponds to the energy relaxation of photoexcited free electrons into self-trapped polaron states. We reveal that the polaron formation time is enhanced considerably at the LaAlO3/SrTiO3 heterointerface as compared to bulk crystals. Further, we discuss the interface effects on the electron relaxation dynamics in conjunction with the splitting of the t2g subbands due to the interface potential.

Scanning probe manipulation of magnetism at the LaAlO3/SrTiO3 heterointerface.

Manipulation of magnetism is a longstanding goal of research in exotic materials. In this work, we demonstrate that the small ferromagnetic patches in LaAlO(3)/SrTiO(3) heterostructures can be dramatically changed by in situ contact of a scanning probe. Our results provide a platform for manipulation of small magnets through either a strong magneto-elastic coupling or sensitivity to surface modification. The ability to locally control magnetism is particularly interesting due to the presence of superconductivity with strong spin-orbit coupling in LaAlO(3)/SrTiO(3).

A heteroepitaxial perovskite metal-base transistor.

'More than Moore' captures a concept for overcoming limitations in silicon electronics by incorporating new functionalities in the constituent materials. Perovskite oxides are candidates because of their vast array of physical properties in a common structure. They also enable new electronic devices based on strongly-correlated electrons. The field effect transistor and its derivatives have been the principal oxide devices investigated thus far, but another option is available in a different geometry: if the current is perpendicular to the interface, the strong internal electric fields generated at back-to-back heterojunctions can be used for oxide electronics, analogous to bipolar transistors. Here we demonstrate a perovskite heteroepitaxial metal-base transistor operating at room temperature, enabled by interface dipole engineering. Analysis of many devices quantifies the evolution from hot-electron to permeable-base behaviour. This device provides a platform for incorporating the exotic ground states of perovskite oxides, as well as novel electronic phases at their interfaces.

Carbon dioxide adsorption and conversion to methane and ethane on hydrogen boride sheets.

Hydrogen boride (HB) sheets are metal-free two-dimensional materials comprising boron and hydrogen in a 1:1 stoichiometric ratio. In spite of the several advancements, the fundamental interactions between HB sheets and discrete molecules remain unclear. Here, we report the adsorption of CO2 and its conversion to CH4 and C2H6 using hydrogen-deficient HB sheets. Although fresh HB sheets did not adsorb CO2, hydrogen-deficient HB sheets reproducibly physisorbed CO2 at 297 K. The adsorption followed the Langmuir model with a saturation coverage of 2.4 × 10-4 mol g-1 and a heat of adsorption of approximately 20 kJ mol-1, which was supported by density functional theory calculations. When heated in a CO2 atmosphere, hydrogen-deficient HB began reacting with CO2 at 423 K. The detection of CH4 and C2H6 as CO2 reaction products in a moist atmosphere indicated that hydrogen-deficient HB promotes C-C coupling and CO2 conversion reactions. Our findings highlight the application potential of HB sheets as catalysts for CO2 conversion.

Structural comparison of n-type and p-type LaAlO3/SrTiO3 interfaces.

Using a surface x-ray diffraction technique, we investigated the atomic structure of two types of interfaces between LaAlO3 and SrTiO3, that is, p-type (SrO/AlO2) and n-type (TiO2/LaO) interfaces. Our results demonstrate that the SrTiO3 in the sample with the n-type interface has a large polarized region, while that with the p-type interface has a limited polarized region. In addition, atomic intermixing was observed to extend deeper into the SrTiO3 substrate at the n-type interface compared to the p type. These differences result in distinct degrees of band bending, which likely contributes to the striking contrast in electrical conductivity between the two types of interfaces.

Charge Writing at the LaAlO3/SrTiO3 surface.

Biased conducting-tip atomic force microscopy (AFM) has been shown to write and erase nanoscale metallic lines at the LaAlO(3)/SrTiO(3) interface. Using various AFM modes, we show the mechanism of conductivity switching is the writing of surface charge. These charges are stably deposited on a wide range of LaAlO(3) thicknesses, including bulk crystals. A strong asymmetry with writing polarity was found for 1 and 2 unit cells of LaAlO(3), providing experimental evidence for a theoretically predicted built-in potential.

Cold Crystallization and the Molecular Structure of Imidazolium-Based Ionic Liquid Crystals with a p-Nitroazobenzene Moiety.

The cold crystallization mechanism of 1-{[4'-(4″-nitrophenylazo)phenyloxy]}hexyl-3-methyl-1H-imidazol-3-ium tetrafluoroborate ionic liquid crystal was investigated based on thermal analysis, structural analysis, infrared spectroscopy, and quantum chemical calculations. By conducting thorough structural characterization, we found that the prerequisite for cold crystallization is the irreversible molecular conformational alteration induced by the initial heating of the as-grown crystal into a smectic liquid crystal. The originally linear cation molecule bends and forms a step-stair conformation that persists throughout the subsequent heating and cooling processes as phase transition occurs from the crystal phase to the liquid crystal phase and then to the isotropic liquid phase. The formation of cold crystal occurs because of the choice of molecular stability over crystalline stability. Given the exothermic anomaly exhibited upon heating generic crystals to cold crystals, these findings demonstrate the promising potential of this ionic liquid crystal for thermal energy storage applications.

Charge order textures induced by non-linear couplings in a half-doped manganite.

The self-organization of strongly interacting electrons into superlattice structures underlies the properties of many quantum materials. How these electrons arrange within the superlattice dictates what symmetries are broken and what ground states are stabilized. Here we show that cryogenic scanning transmission electron microscopy (cryo-STEM) enables direct mapping of local symmetries and order at the intra-unit-cell level in the model charge-ordered system Nd1/2Sr1/2MnO3. In addition to imaging the prototypical site-centered charge order, we discover the nanoscale coexistence of an exotic intermediate state which mixes site and bond order and breaks inversion symmetry. We further show that nonlinear coupling of distinct lattice modes controls the selection between competing ground states. The results demonstrate the importance of lattice coupling for understanding and manipulating the character of electronic self-organization and that cryo-STEM can reveal local order in strongly correlated systems at the atomic scale.