Diets varying in ratio of sweet sorghum silage to corn silage for lactating dairy cows: Feed intake, milk production, blood biochemistry, ruminal fermentation, and ruminal microbial community.

The objective of this study was to investigate the effects of partial substitution of corn silage (CS) with sweet sorghum silage (SS) in the diets of lactating dairy cows on dry matter (DM) intake, milk yield and composition, blood biochemistry, and ruminal fermentation and microbial community. Thirty mid-lactation Holstein dairy cows [mean ± standard deviation; 639 ± 42.0 kg of body weight; 112 ± 24.0 d in milk (DIM)] were assigned to 3 groups (n = 10/treatment) by considering parity, milk yield, and DIM. The cows were fed ad libitum total mixed rations containing 55% forage and 45% concentrate, with only the proportion of CS and SS varying in 3 treatments (DM basis): SS0 (0% substitution of CS), 40% CS and 0% SS; SS25 (25% substitution of CS), 30% CS and 10% SS; and SS50 (50% substitution of CS), 20% CS and 20% SS. Dry matter intake and milk protein concentration tended to linearly decrease with increasing proportion of SS in the diet. Yields of milk (mean ± standard deviation, 30.9 ± 1.12 kg/d), 4% fat-corrected milk (30.0 ± 0.81 kg/d), energy-corrected milk, milk protein, lactose, and total solids, concentrations of milk fat, lactose, somatic cell counts, and milk efficiency did not differ among diets. The concentrations in blood of urea nitrogen, phosphorus, aspartate aminotransferase, and malondialdehyde linearly increased with increasing SS proportion. Blood IgA decreased with increasing SS substitution rate, but blood IgG and IgM were not different among diets. Ruminal pH did not differ among diets, whereas ruminal NH3-N concentration quadratically changed such that it was greater for SS50 than for SS0 and SS25. Molar proportions of propionate and acetate to propionate ratio were less for SS25 than for SS0. Although the diversity and general ruminal microbial community structure were not altered by partially replacing CS with SS, the relative abundances of predominant bacteria were affected by diets at the phylum and genus levels. Firmicutes and Bacteroidetes were dominant phyla in the ruminal bacterial community for all diets, and their relative abundance linearly decreased and increased, respectively, with increasing SS substitution rate. Prevotella_1 and Ruminococcaceae_NK4A214_group were detected as the most and the second most abundant genera, with their relative abundance linearly increased and decreased, respectively, with increasing SS substitution rate. The relative abundance of Fibrobacter linearly increased with increasing dietary SS proportion, with greater abundance observed for SS25 and SS50 than for SS0. These results suggest that substitution of CS with SS altered the relative abundances of some predominant bacteria; however, these changes had little effect on ruminal fermentation and milk yield. Under the current experimental conditions, substituting up to 50% of CS with SS had no negative effects on milk yield, indicating that SS can partially replace CS in the diets of high-producing lactating dairy cows without adding extra grain, when diets are fed for a short time. As the effects of substituting CS with SS depend upon the chemical composition and digestibility of these silages and the nutrient requirements of the cows, additional grain may be required in some cases to compensate for the lower starch content of SS.

Diversity and structure of a bacterial community in grassland soils disturbed by sheep grazing, in the Loess Plateau of northwestern China.

The relationship between disturbance, biodiversity, and ecosystem function has been a hot topic recently in international ecological research, and a universally applicable model remains elusive. In this study, we assessed the diversity and structure of a bacterial community in grassland soils along a disturbance gradient due to sheep grazing. Bacteria were identified based on 16S rDNA gene libraries prepared from a 12-year field experiment that included four grazing, intensity treatments: no grazing, light grazing, moderate grazing and heavy grazing in the Loess Plateau of northwestern China. We found that diversity indices of bacterial 16S rDNA increased with grazing intensity, suggesting that disturbance led to higher bacterial diversity. The bacterial community structure, measured as species composition, was also affected by grazing. In addition, the change in soil bacterial community composition was maximum under heavy grazing, based on the Sorensen similarity index. Overall, the relationship between disturbance and bacterial diversity is complex, therefore, more studies are required to determine the possibility of using microbial diversity as an indicator of ecosystem stability.

Gentiana straminea supplementation improves feed intake, nitrogen and energy utilization, and methane emission of Simmental calves in northwest China.

OBJECTIVE: Native plants can be used as additives to replace antibiotics to improve ruminant feed utilization and animal health. An experiment was conducted to evaluate the effects of Gentiana straminea (GS) on nutrient digestibility, methane emissions, and energy metabolism of Simmental calves. METHODS: Thirty-two (5-week-old) male Simmental clves, with initial body weight (BW) of 155±12 kg were fed the same basal diet of concentrates (26%), alfalfa hay (37%), and oat hay (37%) and were randomly separated into four treatment groups according to the amount of GS that was added to their basal diet. The four different groups received different amounts of GS as a supplement to their basal diet during whole experiment: (0 GS) 0 mg/kg BW, the control; (100 GS) 100 mg/kg BW; (200 GS) 200 mg/kg BW; and (300 GS) 300 mg/kg BW. RESULTS: For calves in the 200 GS and 300 GS treatment groups, there was a significant increase in dry matter (DM) intake (p<0.01), average daily gain (ADG) (p<0.05), organic matter intake (p<0.05), DM digestibility (p<0.05), neutral detergent fibre (NDF) digestibility (p<0.05), and acid detergent fibre (ADF) digestibility (p<0.05). Dietary GS supplementation result in quadratic increases of DM intake (p<0.01), ADG (p<0.05), NDF intake (p<0.05), and ADF intake (p<0.05). Supplementing the basal diet with GS significantly increased nitrogen (N) retention (p<0.001) and the ratio of retention N to N intake (p<0.001). Supplementing the basal diet with GS significantly decreased methane (CH4) emissions (p<0.01), CH4/BW0.75 (p<0.05) and CH4 energy (CH4-E) (p<0.05). Dietary GS supplementation result in quadratic increases of CH4 (p<0.01) and CH4/DM intake (p<0.01). Compared with 0 GS, GS-supplemented diets significantly improved their gross energy intake (p<0.05). The metabolizable energy and digestive energy intake were significantly greater for calves in the 100 GS and 200 GS calves than for 0 GS calves (p<0.05). CONCLUSION: From this study, we conclude that supplementing calf diets with GS could improve utilization of feed, energy, and N, and may reduce CH4 emissions without having any negative effects on animal health.

Determination of maintenance energy requirement and responses of dry ewes to dietary inclusion of lucerne versus concentrate meal.

An accurate value for metabolizable energy (ME) requirement for maintenance (MEm) is essential to enable sheep husbandry practice to reach its potential. The objectives of the study were to use calorimetry chamber data of dry ewes (Hu × thin-tail Han F1 crossbred) to develop updated MEm, examine effects of substituting concentrate feed with lucerne hay on energy partitioning, and explore the relationships between energy utilization and fasting heat production (FHP). Data were collected from three experiments. In Exps. 1, 2a and 2b, lucerne hay was used to replace concentrates in three levels (0:40%, 15:25% and 30:10%), with diets containing 60% maize stover (Exp. 1), fresh rye forage (Exp. 2a) or dry rye forage (Exp. 2b). Within each experiment, diets were isoenergetic (digestible energy, DE) and isonitrogenous. Exp. 3 aimed at evaluating effects of three BW levels on nutrient utilization of dry ewes offered diets containing 60% maize stover, 15% lucerne hay and 25% concentrates. Energy metabolism data were measured using the respiration calorimeter chamber technique in all three experiments, followed by the measurement of FHP in Exps. 1, 2b and 3. The MEm derived from the linear regression between energy balance (EB) and ME intake was 0.440 MJ/kg BW0.75. The average FHP was 0.326 MJ/kg BW0.75. The fasting metabolism, net energy requirement for maintenance (NEm) and MEm were estimated to be 0.336, 0.359 and 0.511 MJ/kg BW0.75, respectively, through adjustment of FHP using fasting urinary energy output, activity allowance and efficiency of ME use for maintenance. The FHP was negatively correlated to EB/metabolic BW, ME/gross energy (GE), ME/DE, EB/GE intake and EB/ME intake, while positively correlated to HP/GE intake, HP/ME intake and CH4-E/GE intake. Compared to zero lucerne hay diet, the 15% lucerne hay intake decreased HP (MJ/d), and had no negative effects on EB (MJ/d) or energy utilization efficiencies. The results indicate that nutrient requirement standards currently used across the world are likely to underestimate MEm for dry ewes, and the selection of low FHP ewes for breeding has the potential to improve sheep production efficiency.

Femoral structure and stiffness in patients with femoral neck fracture.

Bone morphological characteristics may relate to the risk of hip fracture. We applied finite element modeling to radiologic data for two groups of women in vivo to address two questions: (a) Do individuals who have just sustained a femoral neck fracture exhibit reduced three-dimensional structural stiffness? and (b) Are victims of hip fracture disproportionately more susceptible to loads sustained in a fall than to stance-type loads? Ten white women (age: 64-76 years) who had just sustained a femoral neck fracture and 18 female volunteers (age: 65-76 years), matched as groups for race, age. and body mass index, were evaluated. From quantitative computed tomography scans, femoral morphometric and volumetric cancellous density measurements were obtained and a finite element model was constructed. Two load conditions were simulated: single-stance phase and lateral fall. Global stiffness values were determined for each model. The cancellous bone density was significantly lower at the femoral neck and the femoral neck and head diameters were significantly larger in the women in the fracture group than in those in the control group. The stiffness of the proximal femur did not differ significantly between the groups for either load condition. An apparently linear relationship was found for stiffness at stance load compared with stiffness at fall load (r = 0.84, p < 0.001). and slopes did not differ significantly between the groups. Although cancellous density was reduced at the fracture site in patients with femoral neck fractures. this did not result in a reduction in the predicted bone stiffness. Previous studies have established a very strong relationship between the stiffness and strength of bone. Since these modeling methods were thoroughly validated ex vivo, we conclude that although decreased bone density at the femoral neck may predict where fracture initiates, the risk of hip fracture per se may be more strongly dependent on issues such as the risk of falling and fall biomechanics than on the structural characteristics of bone.

Trabecular shear stress in human vertebral cancellous bone: intra- and inter-individual variations.

Correlation of the mean and standard deviation of trabecular stresses has been proposed as a mechanism by which a strong relationship between the apparent strength and stiffness of cancellous bone can be achieved. The current study examined whether the relationship between the mean and standard deviation of trabecular von Mises stresses can be generalized for any group of cancellous bone. Cylindrical human vertebral cancellous bone specimens were cut in the infero-superior direction from T12 of 23 individuals (inter-individual group). Thirty nine additional specimens were prepared similarly from the T4-T12 and L2-L5 vertebrae of a 63 year old male (intra-individual group). The specimens were scanned by micro-computed tomography (microCT) and trabecular von Mises stresses were calculated using finite element modeling. The expected value, standard deviation and coefficient of variation of the von Mises stress were calculated form a three-parameter Weibull function fitted to von Mises stress data from each specimen. It was found that the average and standard deviation of trabecular von Mises shear stress were: (i) correlated with each other, supporting the idea that high correlation between the apparent strength and stiffness of cancellous bone can be achieved through controlling the trabecular level shear stress variations, (ii) dependent on anatomical site and sample group, suggesting that the variation of stresses are correlated to the mean stress to different degrees between vertebrae and individuals, and (iii) dependent on bone volume fraction, consistent with the idea that shear stress is less well controlled in bones with low BV/TV. The conversion of infero-superior loading into trabecular von Mises stresses was maximum for the tissue at the junction of the thoracic and lumbar spine (T12-L1) consistent with this junction being a common site of vertebral fracture.

Human vertebral body apparent and hard tissue stiffness.

Cancellous bone apparent stiffness and strength are dependent upon material properties at the tissue level and trabecular architecture. Microstructurally accurate, large-scale finite element (LS-FE) models were used to predict the experimental apparent stiffness of human vertebral cancellous bone and to estimate the trabecular hard tissue stiffness. Twenty-eight LS-FE models of cylindrical human vertebral cancellous bone specimens (8 mm in diameter, 9.5 mm in height, one each from twenty-eight individuals) were generated directly from microcomputed tomography images and solved by a special purpose iterative finite element program. The experimental apparent stiffness and strength of the specimens were determined by mechanical testing to failure in the infero superior direction. Morphometric measurements including bone volume fraction (BV/TV), three eigenvalues of the fabric tensor and average P(L) were also calculated. The finite element estimate of apparent stiffness explained much of the variance in both experimental apparent stiffness (r2=0.89) and experimental apparent strength (r2=0.87). Stepwise linear regression analysis demonstrated that the LS-FE estimated apparent stiffness was the only significant predictor of experimental apparent stiffness and strength when it was included with all measured morphometric values. Hard tissue stiffness was quite variable between individuals (mean, 5.7 GPa; S.D. 1.6 GPa), but was not significantly related to age, sex, race, weight or morphometric measures for this sample.

Femoral strength is better predicted by finite element models than QCT and DXA.

Clinicians and patients would benefit if accurate methods of predicting and monitoring bone strength in-vivo were available. A group of 51 human femurs (age range 21-93; 23 females, 28 males) were evaluated for bone density and geometry using quantitative computed tomography (QCT) and dual energy X-ray absorptiometry (DXA). Regional bone density and dimensions obtained from QCT and DXA were used to develop statistical models to predict femoral strength ex vivo. The QCT data also formed the basis of a three-dimensional finite element (FE) models to predict structural stiffness. The femurs were separated into two groups; a model training set (n = 25) was used to develop statistical models to predict ultimate load, and a test set (n = 26) was used to validate these models. The main goal of this study was to test the ability of DXA, QCT and FE techniques to predict fracture load non-invasively, in a simple load configuration which produces predominantly femoral neck fractures. The load configuration simulated the single stance phase portion of normal gait; in 87% of the specimens, clinical appearing sub-capital fractures were produced. The training/test study design provided a tool to validate that the predictive models were reliable when used on specimens with "unknown" strength characteristics. The FE method explained at least 20% more of the variance in strength than the DXA models. Planned refinements of the FE technique are expected to further improve these results. Three-dimensional FE models are a promising method for predicting fracture load, and may be useful in monitoring strength changes in vivo.

Short term in vivo precision of proximal femoral finite element modeling.

As more therapies are introduced to treat osteoporosis, precise in vivo methods are needed to monitor response to therapy and to estimate the gains in bone strength that result from treatment. A method for evaluating the strength of the proximal femur was developed and its short term reproducibility, or precision, was determined in vivo. Ten volunteer subjects aged 51-62 years (mean 55.6 years), eight women and two men, were examined using a quantitative computed tomography (QCT) protocol. They were positioned, scanned, repositioned and re-scanned. The QCT images were registered in three-dimensional space, and finite element (FE) models were generated and processed to simulate a stance phase load configuration. Stiffness was computed from each FE model, and strength was computed using a regression equation between FE stiffness and fracture load for a small set (n = 6) of experimental specimens. The coefficients of variation (COV) and repeatability (COR= 2.23* 42*COV) were determined. The COV for the FE fracture load computed was 1.85%, and the detectable limit (coefficient of repeatability) for serial measurements was 5.85%. That is, if a change of 5.85% or more in computed FE fracture load is observed, it will be too large to be consistent with measurement variation, but instead can be interpreted as a real change in the strength of the bone. The detectable limit of this method makes it suitable for serial research studies on changes in femoral bone strength in vivo.

Shear stress distribution in the trabeculae of human vertebral bone.

The statistical distribution of von Mises stress in the trabeculae of human vertebral cancellous bone was estimated using large-scale finite element models. The goal was to test the hypothesis that average trabecular von Mises stress is correlated to the maximum trabecular level von Mises stress. The hypothesis was proposed to explain the close experimental correlation between apparent strength and stiffness of human cancellous bone tissue. A three-parameter Weibull function described the probability distribution of the estimated von Mises stress (r2>0.99 for each of 23 cases). The mean von Mises stress was linearly related to the standard deviation (r2=0.63) supporting the hypothesis that average and maximum magnitude stress would be correlated. The coefficient of variation (COV) of the von Mises stress was nonlinearly related to apparent compressive strength, apparent stiffness, and bone volume fraction (adjusted r2=0.66, 0.56, 0.54, respectively) by a saturating exponential function [COV = A + B exp(-x/C)]. The COV of the stress was higher for low volume fraction tissue (<0.12) consistent with the weakness of low volume fraction tissue and suggesting that stress variation is better controlled in higher volume fraction tissue. We propose that the average stress and standard deviation of the stress are both controlled by bone remodeling in response to applied loading.

Effect of porous coating and loading conditions on total hip femoral stem stability.

An examination of femoral bone-prosthesis interface behavior under different load types is undertaken using finite-element analysis. Three-dimensional finite-element models are made of two designs of hip prostheses after implantation in a femur. Femoral geometry was determined by computed tomography scans. The models were loaded in one-legged stance and stairclimbing configurations. The implants were modeled as both smooth surfaced and porous coated. The amount of contact and the relative motion between bone and implant were calculated. It is shown that torsional loads such as occur during stairclimbing contribute to larger amounts of implant micromotion than does stance loading. Contact at the bone-prosthesis interface is more dependent on load type than on implant geometry or surface coating type.

Structural studies of the glycopeptides of B-chain of cinnamomin--a type II ribosome-inactivating protein by nuclear magnetic resonance.

Cinnamomin is a plant type II ribosome-inactivating protein (RIP) isolated from the seeds of Cinnamomum camphora. It consists of two nonidentical polypeptide chains (A- and B-chain) held together through one disulfide linkage. Its A- and B-chain contain 0.3% and 3.9% sugars respectively. The B-chain of cinnamomin was digested by pronase E and then the liberated glycopeptides were separated from non-glycopeptides by gel filtration chromatography on a Bio-Gel P-4 column. Three crude glycopeptides were obtained by continuing chromatography over anion-exchange resin (AG1-X2) in the buffer of 2% pyridine-acetic acid (pH 8.3) with a polygradient elution system. Through further purification by the gel filtration chromatography and HPLC, three major glycopeptides, GP1, GP2 and GP3 were obtained. Mainly by two-dimensional Nuclear Magnetic Resonance (NMR) including TOCSY, DQF-COSY, NOESY, HMQC and HMBC, their primary structures were analyzed as: Man\balpha1,3Man\balpha1,6(Man\balpha1,3)(Xyl\bbeta1,2)Man\bbeta1,4GlcNAc\bbeta1,4GlcNAc\bbeta1-(Gly-)Asn-Asn-Thr(GP1), Man\balpha1,6(Man\balpha1,3)(Xyl\bbeta1,2)Man\bbeta1,4GlcNAc\bbeta1,4(Fuc\balpha1,3)GlcNAc\bbeta1-Asn-Ala-Thr(GP2),Man\balpha1,6(Man\balpha1,3)Man\balpha1,6(Man\balpha 1,2 Man\balpha1,3)Man\bbeta1,4GlcNAc\bbeta1,4GlcNAc\bbeta1-(Ala-)Asn-Gly-Thr(GP3).