RESUMEN
BACKGROUND: As one of the fundamental problems in bioinformatics, the double digest problem (DDP) focuses on reordering genetic fragments in a proper sequence. Although many algorithms for dealing with the DDP problem were proposed during the past decades, it is believed that solving DDP is still very time-consuming work due to the strongly NP-completeness of DDP. However, none of these algorithms consider the privacy issue of the DDP data that contains critical business interests and is collected with days or even months of gel-electrophoresis experiments. Thus, the DDP data owners are reluctant to deploy the task of solving DDP over cloud. RESULTS: Our main motivation in this paper is to design a secure outsourcing computation framework for solving the DDP problem. We at first propose a privacy-preserving outsourcing framework for handling the DDP problem by using a cloud server; Then, to enable the cloud server to solve the DDP instances over ciphertexts, an order-preserving homomorphic index scheme (OPHI) is tailored from an order-preserving encryption scheme published at CCS 2012; And finally, our previous work on solving DDP problem, a quantum inspired genetic algorithm (QIGA), is merged into our outsourcing framework, with the supporting of the proposed OPHI scheme. Moreover, after the execution of QIGA at the cloud server side, the optimal solution, i.e. two mapping sequences, would be transferred publicly to the data owner. Security analysis shows that from these sequences, none can learn any information about the original DDP data. Performance analysis shows that the communication cost and the computational workload for both the client side and the server side are reasonable. In particular, our experiments show that PP-DDP can find optional solutions with a high success rate towards typical test DDP instances and random DDP instances, and PP-DDP takes less running time than DDmap, SK05 and GM12, while keeping the privacy of the original DDP data. CONCLUSION: The proposed outsourcing framework, PP-DDP, is secure and effective for solving the DDP problem.
Asunto(s)
Servicios Externos , Humanos , Privacidad , Algoritmos , Biología Computacional , EmocionesRESUMEN
NLRC4 gain-of-function variants are known to cause various autoinflammatory phenotypes, including familial cold autoinflammatory syndrome (FCAS4) and NLRC4 macrophage activation syndrome (NLRC4-MAS). However, to date, no study has linked NLRC4 gain-of-function variants to systemic lupus erythematosus (SLE). In this study, we identified a novel NLRC4 W655S variant in an SLE patient and her son, who had neonatal lupus complicated with macrophage activation syndrome. Our in vitro experiments demonstrated that the W655S NLRC4 increased ASC speck formation and mature IL-1ß secretion compared to the wild-type NLRC4. In addition, the patient had elevated levels of IL-1ß and IL-18 in both serum and PBMCs. RNA sequencing showed that NF-κB and interferon signaling pathways were significantly activated in the patient compared to healthy controls. Furthermore, gene set enrichment analysis revealed upregulation of NLRC4-related pathways in patient PBMCs. In conclusion, our study identified the NLRC4 W655S variant in a patient with SLE. This is the first report linking inflammasomopathy to monogenic SLE. Our findings suggest that inflammasome activation may be a critical driver in the pathogenicity of lupus, and autoinflammatory pathways may play important roles in the development of the disease.
Asunto(s)
Síndromes Periódicos Asociados a Criopirina , Inflamasomas , Lupus Eritematoso Sistémico , Síndrome de Activación Macrofágica , Femenino , Humanos , Recién Nacido , Proteínas de Unión al Calcio/genética , Proteínas Adaptadoras de Señalización CARD/genética , Mutación con Ganancia de Función , Inflamasomas/genética , Inflamasomas/metabolismo , Lupus Eritematoso Sistémico/genética , Lupus Eritematoso Sistémico/metabolismo , Síndrome de Activación Macrofágica/genéticaRESUMEN
Although nanozymes with intrinsic enzyme-like characteristics have aroused great interest in the biosensing field, the challenge is to keep high enzyme-like activity of the nanozyme after the modification of biomolecules onto nanozymes. Herein, a functional zonation strategy of a heterodimer nanozyme was proposed to tackle the challenge and further construct a multiple chemiluminescence (CL) imaging immunoassay. Here Fe3O4-Au as a heterodimer nanozyme model was divided into two zones, in which Fe3O4 nanoparticles (NPs) were regarded as a nanozyme zone and AuNPs were defined as an antibody immobilization zone. A signal amplification probe (Fe3O4-Au-Ab2) was prepared by modifying the secondary antibody (Ab2) on AuNPs of the Fe3O4-Au heterodimer owing to the Au-S bond. The exposed Fe3O4 of the Fe3O4-Au-Ab2 probe shows very high peroxidase-like activity and can efficiently catalyze H2O2-luminol to produce strong CL imaging signals for multiple antigens detection. Using chicken interleukin-4 (ChIL-4) and chicken gamma interferon (ChIFN-γ) as models, the proposed CL imaging immunoassay shows wide linear ranges (0.005-0.10 ng/mL for both ChIL-4 and ChIFN-γ) and low detection limits (0.58 pg/mL for ChIL-4, 0.47 pg/mL for ChIFN-γ) with the characteristics of high sensitivity, high specificity, and good stability. This work provides a promising functional zonation concept for nanozymes to construct new types of nanozyme probes for immunoassay of multiple biomolecules.
RESUMEN
MicroRNAs (miRNAs) in tumor-derived extracellular vesicles (tEVs) are important cancer biomarkers for cancer screening and early diagnosis. Multiplex detection of miRNAs in tEVs facilitates accurate diagnosis but remains a challenge. Herein, we propose an encoded fusion strategy to profile the miRNA signature in tEVs for pancreatic cancer diagnosis. A panel of encoded-targeted-fusion beads was fabricated for the selective recognition and fusion of tEVs, with the turn-on fluorescence signals of molecule beacons for miRNA quantification and barcode signals for miRNA identification using readily accessible flow cytometers. Using this strategy, six types of pancreatic-cancer-associated miRNAs can be profiled in tEVs from 2 µL plasma samples (n = 36) in an isolation-free and lysis-free manner with only 2 h of processing, offering a high accuracy (98%) to discriminate pancreatic cancer, pancreatitis, and healthy donors. This encoded fusion strategy exhibits great potential for multiplex profiling of miRNA in tEVs, offering new avenues for cancer diagnosis and screening.
Asunto(s)
Vesículas Extracelulares , MicroARNs , Neoplasias Pancreáticas , Humanos , MicroARNs/genética , Vesículas Extracelulares/genética , Neoplasias Pancreáticas/diagnóstico , Neoplasias Pancreáticas/genética , Biomarcadores de Tumor/genética , Perfilación de la Expresión Génica , Neoplasias PancreáticasRESUMEN
Metal-organic frameworks (MOFs) show excellent catalytic activity and have been widely applied in diagnosis of diseases and tumors. However, current assay methods usually involve cumbersome configurations and complicated procedures, which inhibit their practical applications. Hence, a Cu-Ni MOF/carbon printed electrode (CPE)-based integrated electrochemical immunosensor was constructed for highly sensitive and efficient determination of carcinoembryonic antigen (CEA). First, highly conductive carbon ink was screen-printed onto a polyethylene terephthalate substrate to manufacture a CPE. Afterward, an aminated Cu-Ni MOF was prepared by a typical solvothermal strategy and modified on the CPE. Owing to its excellent peroxidase activity, the Cu-Ni MOF can catalytically oxidize hydroquinone using hydrogen peroxide, which greatly amplifies the peak current signal. Then the formation of an immune complex inhibited the catalytic activity of the MOF, thus enabling the quantitative determination of CEA content with a wide linear range of 0.5 pg mL-1-500 ng mL-1 and a low detection limit of 0.16 pg mL-1. Furthermore, the Cu-Ni MOF/CPE-based integrated portable electrochemical immunosensor also showed satisfactory performance in the detection of CEA in clinical serum samples with excellent accuracy, showing great potential for application in point-of-care disease diagnosis.
Asunto(s)
Técnicas Biosensibles , Estructuras Metalorgánicas , Antígeno Carcinoembrionario , Inmunoensayo , CarbonoRESUMEN
Herein, a dual-mode detection system was constructed for efficient and accurate detection of bisphenol A (BPA) with the assistance of the BPA-induced hybridization chain reaction (HCR). The captured DNA (cDNA) was first modified on the surface of magnetic spheres modified with gold nanoparticles and polydopamine and then hybridized with the BPA aptamer to form double-stranded DNA (dsDNA). In the presence of the BPA target, the BPA aptamer was released from the surface of the magnetic sphere. The free cDNA triggered a HCR to construct a DNA duplex. Methylene blue (MB), as a bifunctional probe, was intercalated into the double-stranded DNA to amplify the photocurrent (IPEC) of the CdS-modified electrode and generate an electrochemical current (IEC) at the same time. Under the optimized conditions, the PEC and EC signal responses of the system were linear to the logarithm of BPA concentration in the range of 1.0 × 10-10 M to 1.0 × 10-5 M. The detection limits were found to be 1.27 × 10-11 M and 3.0 × 10-11 M using the PEC and EC methods, respectively. The constructed dual-mode biosensor exhibited good performance for real sample analysis, demonstrating its promising potential for practical applications. In addition, this dual-mode detection strategy provides more accurate and reliable detection results.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Nanopartículas del Metal , ADN Complementario , Oro , Aptámeros de Nucleótidos/genética , Técnicas Electroquímicas/métodos , Técnicas Biosensibles/métodos , Límite de DetecciónRESUMEN
The weak interfacial binding affinities of the inorganic perovskite core with ligands and high density of surface defect states induce the facile detachment of surface ligands from nanocrystals (NCs), resulting in their poor colloidal stability and fluorescence in aqueous. In this work, a powerful ligand engineering strategy was proposed for eliminating the surface defects and aggregation of the NCs. Using an amphiphilic polymer octylamine-modified polyacrylic acid (OPA) as a capping ligand, the as-synthesized CsPbBr3 NCs retain high photoluminescence intensity and stability by the modified ligand-assisted reprecipitation method. The increase in the fluorescence lifetime and NC size could also be observed, and how the NC particle size influences fluorescence lifetime was further studied. In addition, the water stability, photostability, and thermal stability were significantly improved, and the fluorescence of NCs can maintain 80.13% of the original value in water for 15 d. We further validated that the strong binding affinity of OPA and oleylamine ligands with CsPbBr3 NCs leads to a reduction in surface trap states, and a large amount of carboxyl groups of the OPA made the NCs preserve good water solubility. In addition, the OPA has the ability of adjusting the particle size of NCs. Furthermore, a wavelength-shifted colorimetric sensor based on these NCs was constructed for detection of Cl- in sweat, which enables the rapid and visual detection of Cl- with high accuracy and stability. Overall, these CsPbBr3 NCs synthesized by the ligand engineering strategy validated their wide applications in biomedical sensing fields.
Asunto(s)
Nanopartículas , Polímeros , Compuestos de Calcio , Ligandos , Nanopartículas/química , Óxidos , Sudor , TitanioRESUMEN
Here, a label-free perovskite-based photoelectrochemical (PEC) aptasensor was rationally designed for the displacement assay of dibutyl phthalate (DBP), a well-known endocrine disruptor, with the aid of cetyltrimethylammonium bromide (CTAB). In this method, CTAB significantly enhanced the PEC response and humidity resistance of the CH3NH3PbI3 perovskite by forming a protecting layer and passivating the X- and A-sites vacancies of CH3NH3PbI3. In addition, CTAB facilitated the immobilization of an aptamer through van der Waals and hydrophobicity forces, as well as the electrostatic interactions between the phosphate group of the aptamer and the cationic group of CTAB. When exposed to DBP in the affinity solution, the DBP aptamer was released from the electrode because the affinity between DBP and its aptamer competes with the interaction of the aptamer and CTAB. The displacement of the aptamer from the perovskite surface relieves the block effect and thus enhances the photoelectric signal of perovskite. By virtue of the good photoelectrochemical characters of CH3NH3PbI3 and the specific recognition ability of aptamer, the linear range of the PEC sensor was 1.0 × 10-13 to 1.0 × 10-8 M and the detection and quantification limits were down to 2.5 × 10-14 and 8.2 × 10-14 M (S/N = 3), respectively. This work offers a novel strategy for designing aptasensors for the detection of various targets and exhibits the marvelous potential of organic-inorganic perovskite in the field of PEC analysis.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Compuestos de Calcio , Cetrimonio , Dibutil Ftalato , Técnicas Electroquímicas/métodos , Límite de Detección , Óxidos , TitanioRESUMEN
In this research, dual-strategy biosensing of glucose was proposed based on multifunctional CuWO4 nanoparticles (CuWO4 NPs), which were prepared for the application of electrochemical and colorimetric sensing of glucose. CuWO4 NPs show large specific surface area and good conductivity as well as excellent peroxidase-like activity. A sensitive and selective electrochemical glucose biosensor was fabricated with the immobilization of glucose oxidase (GOx) on a CuWO4 NP modified electrode for enhancing the direct electron transfer behavior. A wide linear range of 0.005-1.8 mM with a low detection limit of 1.5 µM and a high sensitivity of 28.02 mA M-1 cm-2 were achieved by using the electrochemical biosensor. Meanwhile, a colorimetric and visual glucose biosensor was constructed based on the GOx/CuWO4 cascade nanozyme, which shows a linear range of 0.05-1.0 mM with excellent selectivity. CuWO4 NPs as a promising matrix open up a dual-strategy biosensor for sensitive and selective detection of glucose.
Asunto(s)
Técnicas Biosensibles , Nanopartículas , Técnicas Electroquímicas , Electrodos , Enzimas Inmovilizadas , Glucosa , Glucosa OxidasaRESUMEN
The development of flexible substrate materials and nanomaterials with high electrochemical performance is of great significance for constructing efficient wearable electrochemical sensors for real-time health monitoring. Herein, a wearable electrochemical sweat sensor based on a Ni-Co MOF nanosheet coated Au/polydimethylsiloxane (PDMS) film was prepared for continuous monitoring of the glucose level in sweat with high sensitivity. First, a stretchable Au/PDMS film based three-electrode system was prepared by chemical deposition of a gold layer on the hydrophilic treated PDMS. Then, Ni-Co MOF nanosheets with high electrocatalytic activity were synthesized by a facile solvothermal method and modified on the Au/PDMS electrode. The electrocatalytic activity of the Ni-Co MOF nanosheets synthesized under different Ni : Co ratios was investigated. The Ni-Co MOF/Au/PDMS (NCAP) film electrode showed excellent electrochemical performance for glucose detection with a wide linear range of 20 µM to 790 µM and a high sensitivity of 205.1 µA mM-1 cm-2. In addition, the flexible sensor shows high stability and a good electrochemical response to glucose when stretched and bent to different levels. Moreover, it maintained long-term stability and high selectivity for glucose monitoring. Lastly, a sweat-absorbent cloth was used to cover the working area of the sensor and was fixed with a needle and thread to form a wearable sweat glucose sensor. The sensor can be attached to the skin for stable, accurate and continuous monitoring of glucose levels in human sweat for one day. This work validates the potential of our high-performance wearable sensor for out-of-clinic health monitoring.
Asunto(s)
Técnicas Biosensibles , Dispositivos Electrónicos Vestibles , Glucemia , Automonitorización de la Glucosa Sanguínea , Dimetilpolisiloxanos , Técnicas Electroquímicas , Glucosa , Humanos , SudorRESUMEN
Activated alumina (Al2O3) has been widely used to remove aqueous anionic pollutants such as phosphate for preventing the eutrophication phenomenon. While Al2O3, as a fine powder material, cannot be stably packed into continuous flow treatment, which limits its practical applications. Herein, we proposed a new strategy in which Al2O3 was encapsulated by calcium alginate (CA) to fabricate Al2O3/CA composite, which has relatively large particle size and can be suitable for application in columns. The BET surface area of Al2O3/CA increased to 51.73 m2/g compared with 37.31 m2/g of Al2O3. The maximum adsorption capacity of phosphate on Al2O3/CA was estimated at 1.92-fold compared with that of pure Al2O3 by Langmuir fitting. The main mechanism of phosphate adsorption was the formation of aluminum phosphate precipitation. Moreover, the column studies showed that the adsorption of phosphate on Al2O3/CA was affected by the amount of outer calcium alginate, bed height, influent flow rates and phosphate concentration. This study demonstrated that Al2O3/CA composite has better adsorption capacity and can be used in the dynamic adsorption system as a promising approach for phosphate removal from water.
Asunto(s)
Alginatos , Contaminantes Químicos del Agua , Adsorción , Cinética , Fosfatos , AguaRESUMEN
A noninvasive fiber material-based wearable electrochemical sensor to continuously monitor the glucose level in sweat is highly desirable for smart fabrics for personal diabetes management. To achieve it, the key challenge is to construct fibers with high stretchability and excellent electrochemical performance. Herein, a highly stretchable Ni-Co metal-organic framework/Ag/reduced graphene oxide/polyurethane (Ni-Co MOF/Ag/rGO/PU) fiber-based wearable electrochemical sensor is fabricated for monitoring the glucose level in sweat continuously with high sensitivity and accuracy. The rGO/PU fiber was simply produced by an improved wet spinning technology, and the Ni-Co MOF nanosheet was coated on its surface to prepare the Ni-Co MOF/Ag/rGO/PU (NCGP) fiber electrode. The Ni-Co MOF has a large specific surface area and high catalytic activity, which enables the fiber sensors with good electrochemical performance with a high sensitivity of 425.9 µA·mM-1·cm-2 and a wide linear range of 10 µM-0.66 mM. More importantly, the NCGP fiber electrode also shows extremely high stretching and bending stability under mechanical deformation. Also, the NCGP fiber electrode has high selectivity and long-time storage stability. Moreover, the NCGP fiber-based three-electrode system was sewn with an absorbent fabric and fixed on a stretchable polydimethylsiloxane film substrate to form a nonenzymatic sweat glucose wearable sensor, which realized real-time monitoring of glucose in human sweat with high accuracy. This indicates that our designed NCGP fiber can be used as a wearable electrochemical sensor for the bio-diagnostics of body sweat.
Asunto(s)
Sudor , Dispositivos Electrónicos Vestibles , Glucosa , Oro , Grafito , HumanosRESUMEN
A covalent organic framework (COF) is a promising type of porous material with customizable surface characteristics. Confining multiple catalytic units within a mesoporous COF can generate abundant active sites and improve the catalytic performance. In this work, a COF with both metalloporphyrin and a metal nanoparticle complex denoted as hemin/TAPB-DMTP-COF/AuNPs (TAPB: 1,3,5-tris(4-amino-phenyl)benzene, DMTP: 2,5-dimethoxyterephaldehyde, AuNPs: Au nanoparticles) has been successfully fabricated through a hierarchical encapsulation method. The as-synthesized composite was then employed to construct an electrochemical sensing platform for the efficient detection of bisphenol A (BPA). Under the optimal conditions, the hemin/TAPB-DMTP-COF/AuNP sensor presented a linear range of 0.01-3 µmol L-1 and a low detection limit of 3.5 nmol L-1. The satisfactory signal amplification is based on a triple-signaling amplification strategy due to the abundant Fe3+ sites of Fe-porphyrin, high conductivity of AuNPs and a large specific surface area of the TAPB-DMTP-COF. The proposed method was used to measure the content of BPA in different water samples with a satisfactory recovery from 95.5 to 104.0%, suggesting the great potential of the sensor in practical applications.
Asunto(s)
Nanopartículas del Metal , Estructuras Metalorgánicas , Metaloporfirinas , Compuestos de Bencidrilo , Catálisis , Oro , FenolesRESUMEN
The poor stability and aqueous-quenching of fluorescence of perovskite nanocrystals (NCs) hinder their application in bio-detection and bio-imaging. Herein, through the synergistic effects of polymer surface ligand and silica encapsulation, highly stable and enhanced aqueous fluorescent CsPbBr3-mPEG@SiO2 NCs were synthesized and used as a novel "on-off-on" fluorescent probe for highly sensitive and selective detection of mercury ions (Hg2+) and glutathione (GSH) in aqueous solutions. The effects of the methoxypolyethylene glycol amine (mPEG-NH2) ligand and silica encapsulation on the stability and aqueous fluorescence of the CsPbBr3 NCs were studied. It indicated that the aqueous fluorescence of perovskite NCs was increased by 2.59 times. The water stability was also greatly improved, with the NCs maintaining 73% of their original fluorescence after storage for 30 days in water. X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR) analyses further demonstrated that the NCs were successfully passivated by mPEG-NH2 and silica. The fluorescence of the CsPbBr3-mPEG@SiO2 nanocrystals was effectively quenched by Hg2+ which is attributed to the electron transfer process between NCs and Hg2+. Then, through the interaction between Hg2+ and GSH, the restoration of fluorescence for CsPbBr3-mPEG@SiO2 was realized. The "on-off-on" fluorescent probe can be used for the detection of Hg2+ and GSH with a low detection limit of 0.08 nM and 0.19 µM, respectively. It also shows a fast response time and high accuracy for practical sample detection. The simple and sensitive fluorescent probe of CsPbBr3-mPEG@SiO2 shows great potential in environmental and biological sensing.
Asunto(s)
Mercurio , Nanopartículas , Compuestos de Calcio , Glutatión , Ligandos , Óxidos , Polímeros , Dióxido de Silicio , Espectroscopía Infrarroja por Transformada de Fourier , Titanio , AguaRESUMEN
This work designed a novel dioctyl phthalate (DOP) photoelectrochemical (PEC) sensor based on a molecularly imprinted polymer (MIP) modified Cu3(BTC)2@Cu2O heterostructure. In this work, a metal organic framework (MOF), Cu3(BTC)2, was coated on Cu2O through a simple immersion method to form a Cu3(BTC)2@Cu2O heterostructure. The heterostructure exhibited strong light adsorption ability, good stability and enhanced photocurrent under visible light irradiation. Using the Cu3(BTC)2@Cu2O heterostructure as the photoelectric converter, a PEC sensor was constructed by imprinting DOP on the heterostructure. Under the optimal experimental conditions, the PEC sensor showed a wide linear range from 25.0 pM-0.1 µM and a low detection limit of 9.15 pM. This method with good sensitivity, stability, selectivity and reproducibility in actual sample analyses showed promising applications of the MOF-based heterostructure in photoelectrochemical analysis fields.
RESUMEN
Using two-dimensional (2D) nickel-based metal organic framework (Ni-MOF) nanosheets as a matrix, Eu3+ and Ag+ were incorporated to synthesize Ag/Eu@Ni-MOF with double luminescence centers of Eu3+ ion (615 nm) and organic ligand (524 nm). And a ratiometric luminescence sensor is constructed based on Ag/Eu@Ni-MOF for sensitive detection of biothiols in aqueous solutions. The dual-emissive fluorescence properties can be tuned by changing the amounts of Ag+ ions doping. The results of temperature and pH effects on the fluorescence of Ag/Eu@Ni-MOF indicates that the Ag/Eu@Ni-MOF is a temperature-sensitive material and the fluorescence of Ag/Eu@Ni-MOF can keep stable over a wide pH range. Due to the binding of -SH in cysteine (Cys) and glutathione (GSH) with Ag+, the ligand luminescence was significantly inhibited by weakening the Ag + influence on the energy transfer process in the MOFs. Therefore, ratiometric fluorescent sensing of biomolecular thiols was realized based on the dual-emission Ag/Eu@Ni-MOF. More importantly, the fluorescence color change can be observed with naked eyes to realize visual detection. The ratiometric fluorescent sensor exhibits high performance for Cys and GSH detection with a wide linear range of 5-250 µM and a relatively low detection limit of 0.20 µM and 0.17 µM, respectively. Furthermore, the biothiols content in human serum was determined with satisfactory results. It proves the Ni-MOF nanosheets can be used as a stable matrix for construction luminescent MOFs for the first time, and validate the great potential of Ag/Eu@Ni-MOF as a ratiometric fluorescent probe for point-of-care testing (POCT) in disease diagnosis.
Asunto(s)
Europio/química , Colorantes Fluorescentes/química , Estructuras Metalorgánicas/química , Níquel/química , Plata/química , Compuestos de Sulfhidrilo/sangre , Colorantes Fluorescentes/síntesis química , Humanos , Estructuras Metalorgánicas/síntesis química , Nanopartículas/química , Soluciones , Espectrometría de FluorescenciaRESUMEN
The fabrication of chemically stable metal-organic frameworks for electrochemical sensors is essential to broaden their applications. In this study, the integration of a Zr-based metal-organic framework (UiO-66-NH2) with multi-walled carbon nanotubes (MWCNTs) was achieved by a one-pot solvothermal reaction. This composite was then characterized by scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, Fourier transform infrared spectroscopy, and contact angle measurements. The porous structure and unreacted amine groups provided by UiO-66-NH2 frameworks accompanied by the excellent conductivity of MWCNTs have made this composite an ideal electrode material for lead detection. After the optimization of MWCNT content and the detection conditions, the oxidation peak currents were proportional to lead concentrations in the range of 0.001-0.8 µmol L-1 with a low detection limit of 0.5 nmol L-1 (S/N = 3). More importantly, the well-preserved crystallinity of MWCNTs@UiO-66-NH2 after 80 cycles and after being soaked in different pH aqueous solutions indicates the promising application of this sensor for real samples. Satisfactory recoveries were achieved when this sensor was used to detect lead in real samples. Furthermore, the excellent stability of this composite makes it possible to be employed in other fields, including extreme acidic media.
RESUMEN
In this research, a novel manganese dioxide nanorod-anchored graphene oxide (MnO2 NRs/GO) composite was synthesized by a simple hydrothermal method for electrochemical sensing application. A highly sensitive electrochemical sensor for dopamine (DA) was constructed by modifying glassy carbon electrode (GCE) with MnO2 NRs/GO. The morphology and performance of the composite material and modified GCEs were investigated by using scanning electron microscopy (SEM), X-ray diffraction (XRD) and cyclic voltammetry (CV), respectively. The resultant MnO2 NRs/GO composite has a large electroactive area and shows excellent electrochemical activity toward DA. Under the optimal conditions, the DA sensor shows a linear response in the DA concentration ranges of 0.1 µM-0.08 mM and 0.08-0.41 mM with a low detection limit of 0.027 µM and a high sensitivity of 602.4 µA·mM-1·cm-2. The MnO2 NRs/GO composite provides a promising platform for the construction of a highly sensitive and selective sensor of DA.
Asunto(s)
Dopamina/análisis , Técnicas Electroquímicas/métodos , Grafito/química , Compuestos de Manganeso/química , Nanocompuestos/química , Nanotubos/química , Óxidos/química , Dopamina/sangre , Dopamina/química , Electrodos , Humanos , Límite de Detección , Oxidación-Reducción , Reproducibilidad de los ResultadosRESUMEN
Multiwalled carbon nanotubes coated with cobalt(II) sulfide nanoparticles were prepared and used for immobilization of glucose oxidase (GOx) to obtain an electrochemical glucose biosensor. The nanocomposite was synthesized through an in-situ hydrothermal method and characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and electrochemical impedance spectroscopy. The results show that the nanocomposite possesses a large specific surface area and apparently enhances the direct electron transfer between GOx and the surface of the electrode, best at a potential near -0.43 V (vs. SCE). The immobilized GOx retains its good bioactivity even at a high surface coverage of 30 pmol cm-2. Under the optimum conditions. The biosensor exhibits a wide linear range (from 8 µM to 1.5 mM), a high sensitivity (15 mA M -1 cm-2), and a 5 µM detection limit (at S/N = 3). The sensor is selective, acceptably repeatable, specific and stable. Graphical abstractMultiwalled carbon nanotubes coated with cobalt(II) sulfide nanoparticles (CoS-MWCNTs) were synthesized through in situ hydrothermal method for the construction of a sensitive electrochemical glucose biosensor.
Asunto(s)
Técnicas Biosensibles/métodos , Técnicas Electroquímicas/métodos , Glucosa Oxidasa/metabolismo , Glucosa/análisis , Nanotubos de Carbono/química , Técnicas Biosensibles/normas , Cobalto , Técnicas Electroquímicas/normas , Electrones , Enzimas Inmovilizadas/metabolismo , Nanopartículas/químicaRESUMEN
With the development of credit businesses, privacy data leakage and data accuracy in loan transactions among different banks tend to be worrisome issues hindering the prosperity of the industry. To address the problem, we propose a blockchain-based cross-bank over-loan prevention (CBOL-ring) mechanism, which ensures that, on the one hand, the plaintext of loan transactions cannot be access to neither participants on the nodes except the bank that handles loan/repayment requests, so as to prevent the borrower from loaning without revealing their privacy data; on the other hand, the other participants are able to prove the effectiveness of the plaintexts through checking the ciphertexts on the blockchain. In addition, we propose a blockchain-based cross-bank over-loan prevention mechanism with low communication volume (CBOL-bullet), which reduces the size of the range proof generated by the BBCBOLP mechanism, thereby reducing the size of the communication volume and saving resources during the data transmission process. Finally, we analyze the security and performance of the two mechanisms, and compare the communication volume of the two mechanisms.