Impact of external carrier noise on the linewidth enhancement factor of a quantum dot distributed feedback laser.

This paper demonstrates that the linewidth enhancement factor of quantum dot lasers is influenced by the external carrier transport issued from different external current sources. A model combining the rate equation and semi-classical carrier noise is used to investigate the different mechanisms leading to the above phenomenon in the context of a quantum dot distributed feedback laser. Meanwhile, the linewidth enhancement factor extracted from the optical phase modulation method shows dramatic differences when the quantum dot laser is driven by different noise-level pumps. Furthermore, the influence of external carrier noise on the frequency noise in the vicinity of the laser's threshold current directly affects the magnitude of the linewidth enhancement factor. Simulations also investigate how the external carrier transport impacts the frequency noise and the spectral linewidth of the QD laser. Overall, we believe that these results are of paramount importance for the development of on-chip integrated ultra-low noise oscillators producing light at or below the shot-noise level.

Histone deacetylase inhibitor givinostat attenuates nonalcoholic steatohepatitis and liver fibrosis.

Nonalcoholic steatohepatitis (NASH) is a common chronic liver disease that is increasingly prevalent worldwide. Liver inflammation is an important contributor to disease progression from nonalcoholic fatty liver (NAFL) to NASH, but there is a lack of efficient therapies. In the current study we evaluated the therapeutic potential of givinostat, a histone deacetylase (HDAC) inhibitor, in the treatment of NASH in vivo and in vitro. Liver inflammation was induced in mice by feeding a methionine- and choline-deficient diet (MCD) or a fructose, palmitate, cholesterol diet (FPC). The mice were treated with givoinostat (10 mg·kg-1·d-1, ip) for 8 or 10 weeks. At the end of the experiment, the livers were harvested for analysis. We showed that givoinostat administration significantly alleviated inflammation and attenuated hepatic fibrosis in MCD-induced NASH mice. RNA-seq analysis of liver tissues form MCD-fed mice revealed that givinostat potently blocked expression of inflammation-related genes and regulated a broad set of lipid metabolism-related genes. In human hepatocellular carcinoma cell line HepG2 and human derived fetal hepatocyte cell line L02, givinostat significantly decreased palmitic acid-induced intracellular lipid accumulation. The benefit of givinostat was further confirmed in FPC-induced NASH mice. Givinostat administration significantly attenuated hepatic steatosis, inflammation as well as liver injury in this mouse model. In conclusion, givinostat is efficacious in reversing diet-induced NASH, and may serve as a therapeutic agent for the treatment of human NASH.

Cyclin-dependent kinase inhibitor roscovitine attenuates liver inflammation and fibrosis by influencing initiating steps of liver injury.

Liver diseases present a significant public health burden worldwide. Although the mechanisms of liver diseases are complex, it is generally accepted that inflammation is commonly involved in the pathogenesis. Ongoing inflammatory responses exacerbate liver injury, or even result in fibrosis and cirrhosis. Here we report that roscovitine, a cyclin-dependent kinase (CDK) inhibitor, exerts beneficial effects on acute and chronic liver inflammation as well as fibrosis. Animal models of lipopolysaccharide (LPS)/d-galactosamine- and acute or chronic CCl4-induced liver injury showed that roscovitine administration markedly attenuated liver injury, inflammation and histological damage in LPS/d-galactosamine- and CCl4-induced acute liver injury models, which is consistent with the results in vitro. RNA sequencing (RNA-seq) analysis showed that roscovitine treatment repressed the transcription of a broad set of pro-inflammatory genes involved in many aspects of inflammation, including cytokine production and immune cell proliferation and migration, and inhibited the TGF-ß signaling pathway and the biological process of tissue remodeling. For further validation, the beneficial effect of roscovitine against inflammation was evaluated in chronic CCl4-challenged mice. The anti-inflammation effect of roscovitine was observed in this model, accompanied with reduced liver fibrosis. The anti-fibrotic mechanism involved inhibition of profibrotic genes and blocking of hepatic stellate cell (HSC) activation. Our data show that roscovitine administration protects against liver diseases through inhibition of macrophage inflammatory actions and HSC activation at the onset of liver injury.

Frequency comb dynamics of a 1.3µm hybrid-silicon quantum dot semiconductor laser with optical injection: erratum.

In Opt. Lett.45, 5755 (2019)OPLEDP0146-959210.1364/OL.44.005755, a factor is missing in the result of Eq. (1). Thus, the width of the comb spectrum $ \Delta \nu $Δν becomes $ \Delta \nu = 2{\sqrt 3} \Gamma {\alpha _e} $Δν=23Γαe.

Effect of p-doping on the intensity noise of epitaxial quantum dot lasers on silicon.

This work experimentally investigates the impact of p-doping on the relative intensity noise (RIN) properties and subsequently on the modulation properties of semiconductor quantum dot (QD) lasers epitaxially grown on silicon. Owing to the low threading dislocation density and the p-modulation doped GaAs barrier layer in the active region, the RIN level is found very stable with temperature with a minimum value of -150dB/Hz. The dynamical features extracted from the RIN spectra show that p-doping between zero and 20 holes/dot strongly modifies the modulation properties and gain nonlinearities through increased internal losses in the active region and thereby hinders the maximum achievable bandwidth. Overall, this Letter is important for designing future high-speed and low-noise QD devices integrated in future photonic integrated circuits.

Silver-Quantum-Dot-Modified MoO3 and MnO2 Paper-Like Freestanding Films for Flexible Solid-State Asymmetric Supercapacitors.

Free-standing paper-like thin-film electrodes have great potential to boost next-generation power sources with highly flexible, ultrathin, and lightweight requirements. In this work, silver-quantum-dot- (2-5 nm) modified transition metal oxide (including MoO3 and MnO2 ) paper-like electrodes are developed for energy storage applications. Benefitting from the ohmic contact at the interfaces between silver quantum dots and MoO3 nanobelts (or MnO2 nanowires) and the binder-free nature and 0D/1D/2D nanostructured 3D network of the fabricated electrodes, substantial improvements on the electrical conductivity, efficient ionic diffusion, and areal capacitances of the hybrid nanostructure electrodes are observed. With this proposed strategy, the constructed asymmetric supercapacitors, with Ag quantum dots/MoO3 "paper" as anode, Ag quantum dots/MnO2 "paper" as cathode, and neutral Na2 SO4 /polyvinyl alcohol hydrogel as electrolyte, exhibit significantly enhanced energy and power densities in comparison with those of the supercapacitors without modification of Ag quantum dots on electrodes; present excellent cycling stability at different current densities and good flexibility under various bending states; offer possibilities as high-performance power sources with low cost, high safety, and environmental friendly properties.

Frequency comb dynamics of a 1.3 µm hybrid-silicon quantum dot semiconductor laser with optical injection.

This work reports on the influence of bias voltage applied on a saturable absorber (SA) on a subthreshold linewidth enhancement factor (LEF) in hybrid-silicon quantum dot optical frequency comb lasers. Results show that the reverse bias voltage on SA contributes to enlarge the LEF and improve the comb dynamics. Optical injection is also found to be able to improve the comb spectrum in terms of 3 dB bandwidth and its flatness. Such novel findings are promising for the development of high-speed dense wavelength-division multiplexing photonic integrated circuits in optical interconnects and datacom applications.

Electric field control of resistive switching and magnetization in epitaxial LaBaCo2O5+δ thin films.

The low operating temperature and volatile characteristics of the magnetization change are the main obstacles for the practical applications of spintronic and magnetic memories. In this work, both the resistive switching and magnetization switching are realized in Pt/LaBaCo2O5+δ (LBCO)/Nb-doped SrTiO3 (Nb-STO) devices at room temperature through an electric field. Unlike the traditional approach of an external stress inducing a volatile magnetization change, the magnetization in the Pt/LBCO/Nb-STO device is modulated by an electrical field, along with the resistive switching. The resistive and magnetization switching can be attributed to the variation of the depletion layer width at the LBCO/Nb-STO interface via oxygen vacancy migration and the increase/decrease of the Co-O-Co bond length, respectively. The present device with the synchronous manipulation of both resistance and magnetization at room temperature can be applied in nonvolatile resistive memories and novel magnetic multifunctional devices.

Structure and magnetic properties of highly oriented LaBaCo2O5+δ films deposited on Si wafers with Pt/Ti buffer layer.

Fabrication of highly crystalline oxide films onto silicon wafers has long been a critical obstacle for integrating multi-functional oxides into silicon-based technology. Herein, Pt/Ti is used as a buffer layer for the integration of highly oriented crystalline LaBaCo2O5+δ (LBCO) thin films onto silicon via pulsed laser deposition. LBCO films are highly (00l) oriented with smooth and sharp LBCO/Pt interfaces. The highly oriented LBCO films exhibit a high magnetic transition temperature (TC) and large coercive field (HC) with superparamagnetism over those deposited on single crystal substrates. What is more, the metallic-like behavior with enhanced magnetoresistance is also observed. The opportunity of using a Pt/Ti buffer layer as the growth template opens an alternative route for integrating functional transition metal oxides with tunable magnetic properties into Si-based technology.

Identification of biomarkers in macrophages of atherosclerosis by microarray analysis.

BACKGROUND: Atherosclerotic cardiovascular disease (ASCVD) refers to a series of diseases caused by atherosclerosis (AS). It is one of the most important causes of death worldwide. According to the inflammatory response theory, macrophages play a critical role in AS. However, the potential targets associated with macrophages in the development of AS are still obscure. This study aimed to use bioinformatics tools for screening and identifying molecular targets in AS macrophages. METHODS: Two expression profiling datasets (GSE7074 and GSE9874) were obtained from the Gene Expression Omnibus dataset, and differentially expressed genes (DEGs) between non-AS macrophages and AS macrophages were identified. Functional annotation of the DEGs was performed by analyzing the Gene Ontology and Kyoto Encyclopedia of Genes and Genomes databases. STRING and Cytoscape were employed for constructing a protein-protein interaction network and analyzing hub genes. RESULTS: A total of 98 DEGs were distinguished between non-AS macrophages and AS macrophages. The functional variations in DEGs were mainly enriched in response to hypoxia, respiratory gaseous exchange, protein binding, and intracellular, ciliary tip, early endosome membrane, and Lys63-specific deubiquitinase activities. Three genes were identified as hub genes, including KDELR3, CD55, and DYNC2H1. CONCLUSION: Hub genes and DEGs identified by using microarray techniques can be used as diagnostic and therapeutic biomarkers for AS.

Photonic Potentiation and Electric Habituation in Ultrathin Memristive Synapses Based on Monolayer MoS2.

Monolayer of 2D transition metal dichalcogenides, with a thickness of less than 1 nm, paves a feasible path to the development of ultrathin memristive synapses, to fulfill the requirements for constructing large-scale high density 3D stacking neuromorphic chips. Herein, memristive devices based on monolayer n-MoS2 on p-Si substrate with a large self-rectification ratio, exhibiting photonic potentiation and electric habituation, are successfully fabricated. Versatile synaptic neuromorphic functions, such as potentiation/habituation, short-term/long-term plasticity, and paired-pulse facilitation, are successfully mimicked based on the inherent persistent photoconductivity performance and the volatile resistive switching behavior. These findings demonstrate the potential applications of ultrathin transition metal dichalcogenides for memristive synapses. These memristive synapses with the combination of photonic and electric neuromorphic functions have prospective in the applications of synthetic retinas and optoelectronic interfaces for integrated photonic circuits based on mixed-mode electro-optical operation.

Multimode optical feedback dynamics in InAs/GaAs quantum dot lasers emitting exclusively on ground or excited states: transition from short- to long-delay regimes.

The optical feedback dynamics of two multimode InAs/GaAs quantum dot lasers emitting exclusively on sole ground or excited lasing states is investigated. The transition from long- to short-delay regimes is analyzed, while the boundaries associated to the birth of periodic and chaotic oscillations are unveiled to be a function of the external cavity length. The results show that depending on the initial lasing state, different routes to chaos are observed. These results are of importance for the development of isolator-free transmitters in short-reach networks.

Comparison of optical feedback dynamics of InAs/GaAs quantum-dot lasers emitting solely on ground or excited states.

We experimentally compare the dynamics of InAs/GaAs quantum dot lasers under optical feedback emitting exclusively on ground states (GSs) or excited states (ESs). By varying the feedback parameters and putting focus either on their short or long cavity regions, various periodic and chaotic oscillatory states are found. The GS laser is shown to be more resistant to feedback, benefiting from its strong relaxation oscillation damping. In contrast, the ES laser can easily be driven into complex dynamics. While the GS laser is of importance for the development of isolator-free transmitters, the ES laser is essential for applications taking advantages of chaos.

Flexible calibration method for telecentric fringe projection profilometry systems.

A newly developed flexible calibration algorithm for telecentric 3D measurement systems is presented in this paper. We theoretically analyzed the similarities and differences between the telecentric and entocentric system. The telecentric system can be calibrated with the aid of the traditional 2D planar calibration method. An additional two-step refining process is proposed to improve the calibration accuracy effectively. With the calibration and refining algorithm, an affine camera can be calibrated with a reprojection error of 0.07 pixel. A projector with small field of view (FOV) is applied to achieve a full 3D reconstruction in our profilometry system. Experiments with a prototype demonstrate the validation and accuracy of the proposed calibration algorithm and system configuration. The reconstruction accuracy can achieve 5 µm with a measurement FOV of 28.43 mm×21.33 mm and a working distance of 110 mm.

Frequency-dependent linewidth enhancement factor of optical injection-locked quantum dot/dash lasers.

Combining theoretical and experimental studies show that optical injection strongly changes the behavior of the linewidth enhancement factor (α(H)-factor) and the FM-to-AM indices ratio (FAIR) in quantum dash/dot semiconductor lasers. In contrast to solitary lasers, both the α(H)-factor and the FAIR at low-frequency modulation are reduced by optical injection. At high modulation frequency, however, the phase-amplitude coupling characteristics are little influenced by optical injection.

Subchronic effects of cadmium on the gonads, expressions of steroid hormones and sex-related genes in tilapia Oreochromis niloticus.

Cadmium (Cd) is one of the most toxic heavy metals in aquatic ecosystem which affects fish health and aquaculture. In the present study, we examined the bioaccumulation of Cd in the gonads of tilapia via dissolved and dietary routes. We evaluated the subchronic effects of Cd on the histology of gonads, steroid hormone levels and sex-related gene expressions in tilapia. In addition, we also studied maternal transfer of Cd. Our results indicated that Cd was accumulated significantly in both ovary and testis from both exposure routes. Histopathological analysis showed that Cd induced ovary and testis injuries. Estradiol levels were significantly increased in dissolved Cd exposed female fish. In addition, the Cd exposure displayed different effects on gene expressions in gonads. In females, the estrogen receptor (ERα) was stimulated in dissolved Cd-exposed fish at 70.32 and 143.78 µg/L for 30 days and in fish at 143.78 µg/L for 60 days. Vitellogenin expression was significantly down-regulated in the ovary of dissolved Cd-exposed fish. In testis, GR expression was elevated after 60 days of dissolved Cd and dietary exposure. Furthermore, Cd level was significantly higher in the eggs than that in the fry. Our results demonstrated that both dissolved and dietary Cd exposures affected gonad development by altering steroid hormone levels and sex-related gene expressions in tilapia.

Self-referenced technique for monitoring and analysing the non-linear dynamics of semiconductor lasers.

We propose in this paper a self-referenced method based on asynchronous sampling to monitor the waveform of periodic and quasi-periodic signals, with a low number of samples, typically 214 or lower. It provides a high-resolution representation of the signal under test, representative of the analog intensity signal under test. Additionally, the proposed approach is robust to the timing jitter of the signal, as experimentally demonstrated. Such features enable the accurate display of periodic and quasi-periodic signals. The method is applied to the characterization of laser dynamics, such as time series and phase portrait of periodic nonlinear regimes in optically injected lasers.

A new iron-based carbon monoxide oxidation catalyst: structure-activity correlation.

A new iron-based catalyst for carbon monoxide oxidation, as a potential substitute for precious-metal systems, has been prepared by using a facile impregnation method with iron tris-acetylacetonate as a precursor on γ-Al2 O3 . Light-off and full conversion temperatures as low as 235 and 278 °C can be reached. However, the catalytic activity strongly depends on the loading; lower loadings perform better than higher ones. The different activities can be explained by variations of the structures formed. The structures are thoroughly characterized by a multimethodic approach by using X-ray diffraction, Brunauer-Emmett-Teller surface areas, and Mössbauer spectroscopy combined with diffuse reflectance UV/Vis and X-ray absorption spectroscopy. Consequently, isolated tetrahedrally coordinated Fe(3+) centers and phases of AlFeO3 are identified as structural requirements for high activity in the oxidation of carbon monoxide.

Facile preparation of high-performance plywood adhesive from gelatinized corn starch crosslinked with ammonium dihydrogen phosphate.

A flame retardant high-performance gelatinized starch (GS)-ammonium dihydrogen phosphate (ADP) wood adhesive, named GS-ADP adhesive was prepared by condensation of GS and ADP under acidic condition. The preparation process of GS-ADP adhesive is very simple by mixing and stirring GS and ADP evenly at room temperature. The results revealed that the GS-ADP adhesive has good storage stability and water resistance, and its wet shear strength is much higher than that of phenolic resin (PF) adhesive. Markedly, the cone calorimeter test results show that G-ADP adhesive has good flame retardancy, and the plywood based on GS-ADP adhesive has good flame retardancy. Meanwhile, it can be seen from dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) that GS-ADP has excellent modulus of elasticity (MOE), high glass transition temperature (Tg) and good thermal stability. The findings suggest that GS-ADP could be a viable substitute for PF resin in structural wood fabrication.

Development and Characterization of Bio-Based Formaldehyde Free Sucrose-Based Adhesive for Fabrication of Plywood.

In order to solve the problem of excessive consumption of petrochemical resources and the harm of free formaldehyde release to human health, biomass raw materials, such as sucrose (S) and ammonium dihydrogen phosphate (ADP) can be chemically condensed in a simple route under acidic conditions to produce a formaldehyde free wood adhesive (S-ADP), characterized by good storage stability and water resistance, and higher wet shear strength with respect to petroleum based phenolic resin adhesive. The dry and boiling shear strength of the plywood based on S-ADP adhesive are as high as 1.05 MPa and 1.19 MPa, respectively. Moreover, is Modulus of Elasticity (MOE) is as high as 4910 MPa. Interestingly, the plywood based on the developed S-ADP adhesive exhibited good flame retardancy. After burning for 90 s, its shape remains unchanged. Meanwhile, it can be concluded from thermomechanical analysis (TMA) and thermogravimetric analysis (TGA) that the S-ADP acquired excellent modulus of elasticity (MOE) and good thermal stability. It is thus thought promisingly that the use of S-ADP adhesive as a substitute for PF resin adhesive seems feasible in the near future.