Time dependency of bone density estimation from computed tomography with intravenous contrast agent administration.

UNLABELLED: Our study has demonstrated that in contrast-enhanced multi-detector computed tomography (MDCT)-based bone density measurements, the scan delay time after contrast agent administration is a statistically significant variable for the derivation of quantitative computed tomography (QCT)-equivalent bone mineral density (BMD) values. INTRODUCTION: Earlier investigators have proposed to derive QCT-equivalent BMD values from contrast-enhanced MDCT scans by using a merely density-based conversion equation. The purpose of this study was to investigate whether the scan delay after intravenous (IV) contrast agent administration might affect BMD values derived in this way. METHODS: A retrospective data analysis was performed on 198 subjects who underwent standardized biphasic MDCT. Average densities values (in Hounsfield units) of lumbar vertebral bodies 1 to 3 (L1-L3) were compared between phases I and II of the biphasic MDCT scan. Furthermore, QCT-equivalent BMD (BMDQCT) values were calculated using a previously published conversion equation. RESULTS: Paired t-test analysis revealed that IV contrast agent administration leads to a statistically significant increase (8.6 %; p < 0.0001) in overall density of L1-L3 from phases I to II. Moreover, comparison of BMDQCT values between phases I and II reveals a change from osteoporotic to osteopenic in 4.5 % of the study population and from osteopenic to normal for 11.1 % of the subjects. Furthermore, it was revealed that the density increase from phases I to II shows a weak, yet statistically significant (p < 0.001) age dependency. CONCLUSIONS: Our study demonstrates that the use of a mere density-based conversion equation for deriving BMDQCT from MDCT scans ignores time dependency as an important variable. Furthermore, our results indicate that the actual age-dependent BMD itself might be another relevant variable that needs to be included in a MDCT-to-QCT conversion equation.

Osteoporosis and atherosclerosis: a post-mortem MDCT study of an elderly cohort.

OBJECTIVES: To evaluate how far fracture status and bone mineral density (BMD) correlate with the vascular calcification score (CS). METHODS: On 29 complete human cadavers (17 female, 12 male; mean age at death was 85.57 years), multi-detector computed tomography was performed to assess the spine fracture status (fracture vs non-fracture [FX vs non-FX]) and CS of the coronary arteries (Coro-CS), the aorta (Aorta-CS) and the pelvic vessels (Iliac-CS). Quantitative computed tomography of the lumbar spine was performed to estimate overall BMD (osteoporotic [BMD <80 mg/cm(3)] vs non-osteoporotic [BMD ≥ 80 mg/cm(3)]). RESULTS: Gender-specific differences in statistical significance were only observed for Aorta-CS and Iliac-CS but not for Coro-CS. When comparing the osteoporotic with the non-osteoporotic group, statistically significant differences were only found for Iliac-CS (P < 0.05); however, linear regression analysis showed none of the CSs to significantly correlate with BMD. CONCLUSIONS: In our small post-mortem elderly population, statistically significant associations of fracture status and BMD with CS were only observed between the osteoporotic and non-osteoporotic groups for the pelvic vessels but not for the coronary arteries and the aorta. KEY POINTS: • Gender-specific differences were observed for aortic and iliac calcification score (CS). • There was no difference in coronary CS between females and males. • Only iliac CS was different in osteoporotic and non-osteoporotic subjects. • In linear regression analysis, CS showed no correlation with BMD. • In univariate analysis, gender was a BMD and iliac CS confounder.

Diffuse idiopathic skeletal hyperostosis (DISH): relation to vertebral fractures and bone density.

UNLABELLED: Radiographs and spinal bone mineral density (BMD) were evaluated from 342 elderly men regarding possible effects of diffuse idiopathic skeletal hyperostosis (DISH) on vertebral fractures and densitometry measurements. Prevalent vertebral fractures were more frequent among men with DISH compared to men with no DISH even after fracture prevalence was adjusted for BMD. Paravertebral calcifications should be considered in patients with DISH when interpreting BMD measurements because both dual X-ray absorptiometry (DXA) and quantitative CT (QCT) densitometry may not be reliable. INTRODUCTION: The purpose of this study is to evaluate the prevalence of DISH in older men and its association with vertebral fractures and with BMD determined by DXA and QCT. METHODS: Lateral radiographs of the spine were analyzed in a sample of 342 men aged ≥ 65 years participating in the MrOS Study concerning the presence and grade of DISH and vertebral fractures. Lumbar BMD was measured by both DXA (areal, grams per square centimeter) and QCT (volumetric, grams per cubic centimeter). The association between DISH, BMD, and presence of fractures was studied using χ ( 2 ) and t tests. RESULTS: DISH was present in 52% (178/342) of the men. Men with DISH were older (mean, 75.1 vs 73.3, p < 0.05) and more likely to have prevalent fractures (28% vs 20%, p < p = 0.09). BMD assessed with DXA (1.08 vs 1.00 g/cm(2), p ≤ 0.0001), but not with QCT (0.11 vs 0.11 g/cm3, p = 0.65), was significantly higher in men with DISH compared to men without DISH. Significantly lower BMD of men with both DISH and fractures compared to men with DISH but without fractures was only detected by QCT (-25%, 0.09 vs 0.12, p < 0.05). Both DXA BMD and QCT BMD were significantly higher in severe lumbar DISH (+22% and +31%, p < 0.0001), respectively. CONCLUSION: DISH was associated with a higher prevalence of vertebral fractures in elderly men. Lumbar ossifications related to DISH should be considered when interpreting BMD measurements to predict their fracture risk.

[Radiological diagnosis of osteoporosis]. / Radiologische Diagnostik der Osteoporose.

Having at their disposal a wide range of imaging techniques, radiologists play a crucial role in the diagnostic evaluation of patients with osteoporosis. The radiological tests range from dual energy X-ray absorptiometry (DXA), which is the only reference method accepted by the WHO, to conventional radiographs for fracture characterization, to more recent techniques for analyzing trabecular structure, and the findings are decisive in initiating correct management of osteoporosis patients. This review provides an overview of established radiological techniques and an outline of new diagnostic approaches.

[Radiological diagnosis of osteoporosis]. / Radiologische Diagnostik der Osteoporose.

Having at their disposal a wide range of imaging techniques, radiologists play a crucial role in the diagnostic evaluation of patients with osteoporosis. The radiological tests range from dual energy X-ray absorptiometry (DXA), which is the only reference method accepted by the WHO, to conventional radiographs for fracture characterization, to more recent techniques for analyzing trabecular structure, and the findings are decisive in initiating correct management of osteoporosis patients. This review provides an overview of established radiological techniques and an outline of new diagnostic approaches.

A micro-computed tomography study of the trabecular bone structure in the femoral head.

The goal of this study was to characterize the trabecular microarchitecture of the femoral head using micro-computed tomography (ICT). Femoral head specimens were obtained from subjects following total hip replacement. Cylindrical cores from the specimens were scanned to obtain 3-D images with an isotropic resolution of 26 Im. Bone structural parameters were evaluated on a per millimeter basis: relative bone volume (BV/TV), trabecular number (Tb.N), thickness (Tb.Th) and separation (Tb.Sp), structure model index (SMI), and connectivity (Conn.D). The ICT data show that the first two millimeters, starting at the joint surface, are characterized by more plate-like trabeculae, and are significantly denser than the underlying trabecular bone. Regional differences in the trabecular architecture reveal that the superior pole has significantly higher BV/TV, Tb.N and Tb.Th values, with lower Tb.Sp compared to the inferior and side poles. Because subchondral bone is essential in the load attenuation of joints, the difference in bone structure between the subchondral and trabecular bone might arise from the different functions each have within joint-forming bones. The denser trabecular structure of the superior pole as compared to the inferior pole can be interpreted as a functional adaptation to higher loading in this area.

[Multislice-CT for structure analysis of trabecular bone - a comparison with micro-CT and biomechanical strength]. / Mehrschicht-CT zur Strukturanalyse des trabekulären Knochens - Vergleich mit Mikro-CT und biomechanischer Festigkeit.

OBJECTIVES: MS-CT (Multislice-Spiral-CT) has a higher spatial resolution compared to the SS-CT (Singleslice-CT). The purpose of this study was to investigate, if the higher spatial resolution of the MS-CT has advantages for structural analyses in the assessment of osteoporosis. MATERIAL AND METHODS: 20 cylindrical trabecular bone specimens (diameter 12 mm, length 15 - 20 mm) were harvested from formalin-fixed human thoracic spines. All specimens were examined by Micro-CT and quantitative, histomorphologic parameters were determined. Analogous structural parameters were calculated from the high-resolution images acquired by both MS- and SS-CT. Additionally, the BMD (bone mineral density) was measured by QCT (quantitative CT). The maximum compressive strength (MCS) was determined in a biomechanical test. The structural parameters were correlated with the histomorphologic parameters and with the MCS. RESULTS: The parameters bone fraction and trabecular separation correlated significantly in both MS- and SS-CT with the analogous parameters from Micro-CT (r (2) = 0.84, p < 0.01) and the MCS (r (2) = 0.81, p < 0.01). The highest correlation with the MCS was calculated using the trabecular number measured by MS-CT in the superior region near the endplate of the vertebra with the high-resolution kernel U90 u (r (2) = 0.85, p < 0.01). This correlation was significantly higher than the correlation between MCS and BMD (r (2) = 0.49, p < 0.01). CONCLUSION: Micro-CT- and MS-CT-determined structural parameters of the trabecular bone showed significant, high correlations. Thus, a characterisation of the trabecular structure seems to be possible. The biomechanical stability of the bone can also be predicted well. The structural parameters acquired by MS-CT show higher correlations with the MCS than the BMD or structural parameters determined by SS-CT do. In this study MS-CT was best suited to predict biomechanical strength of trabecular bone.

[New techniques for the diagnosis of osteoporosis]. / Neue Techniken in der Osteoporosediagnostik.

In this review article current developments and applications in quantitative osteoporosis imaging are presented. Developments in the field of DXA include geometrical parameters of the proximal femur such as the "hip axis length" and new ROIs to determine BMD. Advances in QCT are new volumetric techniques to quantify BMD at the lumbar spine and the proximal femur. In addition techniques to determine BMD in standard contrast-enhanced abdominal computed tomography studies are described. Currently with the new bone quality concept in full bloom techniques to quantify trabecular bone architecture as new surrogates of bone strength are of increasing significance. Spatial high-resolution techniques such as magnetic resonance imaging and new computed tomography techniques have shown their potential in assessing trabecular bone structure. In addition ultrasound is considered a low-cost technique to explore bone quality.