RESUMEN
Two structurally dissimilar 3d-4f cages having the formulae [(CoIII)3Gd4(µ3-OH)2(CO3) (O2CtBu)11(teaH)3]·5H2O (1) and [(CoIII)3Dy3(µ3-OH)4(O2CtBu)6(teaH)3]·(NO3)2·H2O (2) have been isolated under similar reaction conditions and stoichiometry of the reactants. The most important factor for structural diversity seems to be the incorporation of one µ3-carbonate anion in 1 and not in 2. Co atoms are in a +3 oxidation state in both complexes, as shown by the Bond Valence Sum (BVS) calculations and bond lengths, and as further supported by magnetic measurements. Co3Gd4 displays a significant magnetocaloric effect (-∆Sm = 25.67 J kg-1 K-1), and Co3Dy3 shows a single molecule magnet (SMM) behavior.
RESUMEN
Covalent organic frameworks (COFs) are an emerging category of organic polymers with highly porous crystalline structures. In the last decade, reports on the use of COFs as heterogeneous photocatalysts for organic transformations have shown significant progress. Still, comprehensive reviews on the mechanisms of the photocatalytic organic transformations using COFs are lacking. This Review provides a comprehensive and systematic overview of COF-based photocatalysts for organic transformations. Firstly, we discuss the photophysical properties and the characterization methods of COF-based photocatalysts. Then, the general photocatalytic mechanism, the advantages, and the strategies to improve the photocatalytic efficiency of COF-based photocatalysts are summarized. After that, advanced examples of COF-based photocatalysts for organic transformations are analyzed with regard to the underlying mechanisms. The Review ends with a critical perspective on the challenges and prospects.
RESUMEN
The differentiation between missing linker defects and missing cluster defects in MOFs is difficult, thereby limiting the ability to correlate materials properties to a specific type of defects. Herein, we present a novel and easy synthesis strategy for the creation of solely "missing cluster defects" by preparing mixed-metal (Zn, Zr)-UiO-66 followed by a gentle acid wash to remove the Zn nodes. The resulting material has the reo UiO-66 structure, typical for well-defined missing cluster defects. The missing clusters are thoroughly characterized, including low-pressure Ar-sorption, iDPC-STEM at a low dose (1.5 pA), and XANES/EXAFS analysis. We show that the missing cluster UiO-66 has a negligible number of missing linkers. We show the performance of the missing cluster UiO-66 in CO2 sorption and heterogeneous catalysis.
RESUMEN
C2/C1 hydrocarbon separation is an important industrial process that relies on energy-intensive cryogenic distillation methods. The use of porous adsorbents to selectively separate these gases is a viable alternative. Highly stable covalent triazine frameworks (urea-CTFs) have been synthesized using 1,3-bis(4-cyanophenyl)urea. Urea-CTFs exhibited gas uptakes of C2H2 (3.86 mmol/g) and C2H4 (2.92 mmol/g) at 273 K and 1 bar and is selective over CH4. Breakthrough simulations show the potential of urea-CTFs for C2/C1 separation.
RESUMEN
Covalent Organic Frameworks (COFs), an emerging class of crystalline porous materials, are a new type of support for grafting lanthanide ions (Ln3+ ), which can be employed as ratiometric luminescent thermometers. In this work we have shown that COFs co-grafted with lanthanide ions (Eu3+ , Tb3+ ) and Cu2+ (or potentially other d-metals) can synchronously be employed both as a nanothermometer and catalyst during a chemical reaction. The performance of the thermometer could be tuned by changing the grafted d-metal and solvent environment. As a proof of principle, the Glaser coupling reaction was investigated. We show that temperature can be precisely measured during the course of the catalytic reaction using luminescence thermometry. This concept could be potentially easily extended to other catalytic reactions by grafting other d-metal ions on the Ln@COF platform.
RESUMEN
The stability of metal-organic frameworks (MOFs) typically decreases with an increasing number of defects, limiting the number of defects that can be created and limiting catalytic and other applications. Herein, we use a hemilabile (Hl) linker to create up to a maximum of six defects per cluster in UiO-66. We synthesized hemilabile UiO-66 (Hl-UiO-66) using benzene dicarboxylate (BDC) as linker and 4-sulfonatobenzoate (PSBA) as the hemilabile linker. The PSBA acts not only as a modulator to create defects but also as a coligand that enhances the stability of the resulting defective framework. Furthermore, upon a postsynthetic treatment in H2SO4, the average number of defects increases to the optimum of six missing BDC linkers per cluster (three per formula unit), leaving the Zr-nodes on average sixfold coordinated. Remarkably, the thermal stability of the materials further increases upon this treatment. Periodic density functional theory calculations confirm that the hemilabile ligands strengthen this highly defective structure by several stabilizing interactions. Finally, the catalytic activity of the obtained materials is evaluated in the acid-catalyzed isomerization of α-pinene oxide. This reaction is particularly sensitive to the Brønsted or Lewis acid sites in the catalyst. In comparison to the pristine UiO-66, which mainly possesses Brønsted acid sites, the Hl-UiO-66 and the postsynthetically treated Hl-UiO-66 structures exhibited a higher Lewis acidity and an enhanced activity and selectivity. This is further explored by CD3CN spectroscopic sorption experiments. We have shown that by tuning the number of defects in UiO-66 using PSBA as the hemilabile linker, one can achieve highly defective and stable MOFs and easily control the Brønsted to Lewis acid ratio in the materials and thus their catalytic activity and selectivity.
RESUMEN
Invited for the cover of this issue is the group of Pascal Vanâ Derâ Voort at the University of Ghent and colleagues at Technische Universität Berlin. The image depicts the covalent triazine frameworks reported in the manuscript for the sorption of CO2 and also in metal-free catalysis. Read the full text of the article at 10.1002/chem.201903926.
RESUMEN
Covalent triazine frameworks (CTFs) have provided a unique platform in functional material design for a wide range of applications. This work reports a series of new CTFs with two new heteroaromatic building blocks (pyrazole and isoxazole groups) through a building-block transformation approach aiming for carbon capture and storage (CCS) and metal-free catalysis. The CTFs were synthesized from their respective building blocks [(4,4'-(1H-pyrazole-3,5-diyl)dibenzonitrile (pyz) and 4,4'-(isoxazole-3,5-diyl)dibenzonitrile (isox))] under ionothermal conditions using ZnCl2 . Both of the building blocks were designed by an organic transformation of an acetylacetone containing dinitrile linker to pyrazole and isoxazole groups, respectively. Due to this organic transformation, (i)â linker aromatization, (ii)â higher surface areas and nitrogen contents, (iii)â higher aromaticity, and (iv)â higher surface basicity was achieved. Due to these enhanced properties, CTFs were explored for CO2 uptake and metal-free heterogeneous catalysis. Among all, the isox-CTF, synthesized at 400 °C, showed the highest CO2 uptake (4.92â mmol g-1 at 273â K and 2.98â mmol g-1 at 298â K at 1â bar). Remarkably, these CTFs showed excellent metal-free catalytic activity for the aerobic oxidation of benzylamine at mild reaction conditions. On studying the properties of the CTFs, it was observed that organic transformations and ligand aromatization of the materials are crucial factor to tune the important parameters that influence the CO2 uptake and the catalytic activity. Overall, this work highlights the substantial effect of designing new CTF materials by building-block organic transformations resulting in better properties for CCS applications and heterogeneous catalysis.
RESUMEN
Transition metal based high nuclearity molecular magnetic cages are a very important class of compounds owing to their potential applications in fabricating new generation molecular magnets such as single molecular magnets, magnetic refrigerants, etc. Most of the reported polynuclear cages contain carboxylates or alkoxides as ligands. However, the binding ability of phosphonates with transition metal ions is stronger than the carboxylates or alkoxides. The presence of three oxygen donor sites enables phosphonates to bridge up to nine metal centers simultaneously. But very few phosphonate based transition metal cages were reported in the literature until recently, mainly because of synthetic difficulties, propensity to result in layered compounds, and also their poor crystalline properties. Accordingly, various synthetic strategies have been followed by several groups in order to overcome such synthetic difficulties. These strategies mainly include use of small preformed metal precursors, proper choice of coligands along with the phosphonate ligands, and use of sterically hindered bulky phosphonate ligands. Currently, the phosphonate system offers a library of high nuclearity transition metal and mixed metal (3d-4f) cages with aesthetically pleasing structures and interesting magnetic properties. This Account is in the form of a research landscape on our efforts to synthesize and characterize new types of phosphonate based high nuclearity paramagnetic transition metal cages. We quite often experienced synthetic difficulties with such versatile systems in assembling high nuclearity metal cages. Few methods have been emphasized for the self-assembly of phosphonate systems with suitable transition metal ions in achieving high nuclearity. We highlighted our journey from 2005 until today for phosphonate based high nuclearity transition metal cages with V(IV/V), Mn(II/III), Fe(III), Co(II), Ni(II), and Cu(II) metal ions and their magnetic properties. We observed that slight changes in stoichiometry, reaction conditions, and presence or absence of coligand played crucial roles in determining the final structure of these complexes. Most of the complexes included are regular in geometry with a dense arrangement of the above-mentioned metal centers in a confined space, and a few of them also resemble regular polygonal solids (Archimedean and Platonic). Since there needs to be a historical approach for a comparative study, significant research output reported by other groups is also compared in brief to ensure the potential of phosphonate ligands in synthesizing high nuclearity magnetic cages.
RESUMEN
A rare class of four tetranuclear lanthanide based quadruple stranded helicates namely, [Ln4L4(OH)2](OAc)2·xH2O (Ln = Gd(III)(1), Dy(III)(2) and x = 4, 5 respectively), [Er4L4(OH)2](NO3)2·9H2O (3), and [Dy4L4(NO3)](NO3)2·2CH3OH·H2O (4) were synthesized by employing succinohydrazone derived bis-tridentate ligand (H2L) and characterized. Structures of 1-3 are similar to each other except the nature of counterions and number of lattice water molecules. In 4, a distorted nitrate ion was arranged in a hexagonal manner holding four dysprosium centers in a slightly twisted manner. Because of the symmetrical nature of each complex, the C4 axis crosses the center of helicate resulting a pseudo-D4 coordination environment. Each ligand coordinates to lanthanide centers in helical manner forming mixture of left (Λ) and right (Δ) handed discrete units. Complex 1 exhibits antiferromagnetic exchange interaction between nearby Gd(III) centers and shows magnetic refrigeration (-ΔSm = 24.4 J kg(-1) K(-1) for ΔH = 7 T at 3 K). AC magnetic susceptibility measurements of 2 and 4 demonstrate slow relaxation behavior, with Ueff (effective energy barrier) of 20.5 and 4.6 K, respectively. As per our knowledge, complexes 1, 2, and 4 represent the first examples of aesthetically pleasing quadruple stranded helicates showing potential magnetocaloric effect and single-molecule-magnet-like behavior.
RESUMEN
Efficient rhodium(III) catalysts were developed for asymmetric hydrogenation of simple olefins. A new series of chloride-bridged dinuclear rhodium(III) complexes 1 were synthesized from the rhodium(I) precursor [RhCl(cod)]2 , chiral diphosphine ligands, and hydrochloric acid. Complexes from the series acted as efficient catalysts for asymmetric hydrogenation of (E)-prop-1-ene-1,2-diyldibenzene and its derivatives without any directing groups, in sharp contrast to widely used rhodium(I) catalytic systems that require a directing group for high enantioselectivity. The catalytic system was applied to asymmetric hydrogenation of allylic alcohols, alkenylboranes, and unsaturated cyclic sulfones. Control experiments support the superiority of dinuclear rhodium(III) complexes 1 over typical rhodium(I) catalytic systems.
RESUMEN
Three isostructural lanthanide-based two- dimensional coordination polymers (CPs) {[Ln2(L)3(H2O)2]nâ 2n CH3OH)â 2n H2O} (Ln=Gd(3+) (1), Tb(3+) (2), Dy(3+) (3); H2L=cyclobutane-1,1-dicarboxylic acid) were synthesized by using a low molecular weight dicarboxylate ligand and characterized. Single-crystal structure analysis showed that in complexes 1-3 lanthanide centers are connected by µ3-bridging cyclobutanedicarboxylate ligands along the c axis to form a rod-shaped infinite 1D coordination chain, which is further linked with nearby chains by µ4-connected cyclobutanedicarboxylate ligands to form 2D CPs in the bc plane. Viewing the packing of the complexes down the b axis reveals that the lattice methanol molecules are located in the interlayer space between the adjacent 2D layers and form H-bonds with lattice and coordinated water molecules to form 1D chains. Magnetic properties of complexes 1-3 were thoroughly investigated. Complex 1 exhibits dominant ferromagnetic interaction between two nearby gadolinium centers and also acts as a cryogenic magnetic refrigerant having a significant magnetic entropy change of -ΔSm=32.8â J kg(-1) K(-1) for ΔH=7â T at 4â K (calculated from isothermal magnetization data). Complex 3 shows slow relaxation of magnetization below 10â K. Impedance analysis revealed that the complexes show humidity-dependent proton conductivity (σ=1.5×10(-5)â S cm(-1) for 1, σ=2.07×10(-4)â S cm(-1) for 2, and σ=1.1×10(-3)â S cm(-1) for 3) at elevated temperature (>75 °C). They retain the conductivity for up to 10â h at high temperature and high humidity. Furthermore, the proton conductivity results were correlated with the number of water molecules from the water-vapor adsorption measurements. Water-vapor adsorption studies showed hysteretic and two-step water vapor adsorption (182,000â µL g(-1) for 1, 184,000â µL g(-1) for 2, and 1,874,000â µL g(-1) for 3) in the experimental pressure range. Simulation of water-vapor adsorption by the Monte Carlo method (for 1) confirmed the high density of adsorbed water molecules, preferentially in the interlayer space between the 2D layers.
RESUMEN
A highly site-selective, heteroatom-guided, palladium-catalyzed direct arylation of 4H-chromenes is reported. The C-H functionalization is driven not only by the substituents and structure of the substrate but also by the coupling partner being used. The diastereoselective assembly of the core structure of Myristininâ B has been achieved by using a dual C-H functionalization strategy for regioselective direct arylation.
RESUMEN
Two isostructural lanthanide-based 3D coordination networks [Ln = Gd(3+) (1), Dy(3+)(2)] with densely packed distorted cuboid nanoscopic cages are reported for the first time. Magnetic characterization reveals that complex 1 shows a significant cryogenic magnetocaloric effect (-ΔSm = 44 J kg(-1) K(-1)), whereas 2 shows slow relaxation of magnetization.
RESUMEN
We present here a simple, milder, and environmentally benign heterogeneous catalytic method for the transformation of tetrazines to oxadiazole derivatives at room temperature (25 °C) using our earlier synthesized iron-squarate based 3D metal organic framework, [Fe3(OH)3(C4O4)(C4O4)0.5]n (FeSq-MOF).
RESUMEN
The synthesis, structural characterization, and magnetic property studies of five new transition metal (M = Co, Ni) phosphonate-based cages are reported. Three substituted phenyl and benzyl phosphonate ligands [RPO3H2; R1 = p-tert-butylbenzyl, R2 = p-tert-butylphenyl, R3 = 3-chlorobenzyl] were synthesized and employed to seek out high-nuclearity cages. Complexes 1-3 are quasi-isostructural and feature a dodecanuclear metal-oxo core having the general molecular formula of [M12(µ3-OH)4 (O3PR)4(O2C(t)Bu)6 (HO2C(t)Bu)6(HCO3)6] {M = Co, Ni and R = R1 for 1 (Co12), R2 for 2, 3 (Co12, Ni12)}. The twelve metal centers are arranged at the vertices of a truncated tetrahedron in a manner similar to Keggin ion. Complex 4 is an octanuclear nickel phosphonate cage [Ni8(µ3-OH)4 (OMe)2(O3PR1)2 (O2C(t)Bu)6(HO2C(t)Bu)8], and complex 5 represents a pentadecanuclear cobalt phosphonate cage, [Co15(chp)8(chpH) (O3PR3)8(O2C(t)Bu)6], where chpH = 6-chloro-2-hydroxypyridine. Structural investigation reveals some interesting geometrical features in the molecular cores, which may provide new models in single molecular magnetic materials. Magnetic property measurements of compounds 1-5 indicate the coexistence of both antiferromagnetic and ferromagnetic interactions between magnetic centers for all cages.
Asunto(s)
Cobalto/química , Imanes/química , Níquel/química , Organofosfonatos/química , Fenómenos Magnéticos , Modelos Moleculares , Organofosfonatos/síntesis químicaRESUMEN
A novel octadecanuclear copper pyrazolate-phosphonate nanocage with a bowl-shaped arrangement of the copper(II) centers in the asymmetric unit is reported. Characterization of intermediates in both solid and solution states aids to propose the mechanism of such a giant aggregation. Magnetic studies affirm the presence of antiferromagnetic interactions between the adjacent copper(II) centers. Extensive supramolecular interactions result in a framework structure.
Asunto(s)
Cobre/química , Nanoestructuras/química , Organofosfonatos/química , Pirazoles/química , Cristalografía por Rayos X , Magnetismo , Imanes/química , Modelos MolecularesRESUMEN
The reaction of dilithium squarate with Fe(II) perchlorate led to the formation of a new Fe(II)-based 3D MOF, [Fe3(OH)3(C4O4)(C4O4)0.5]n (1), with homoleptic squashed cuboctahedral cages. Complex 1 crystallizes in the monoclinic C2/c space group. Fe(II) centers in the complex are octahedrally coordinated by four squarate dianions in axial and equatorial positions and two hydroxyl groups in the remaining equatorial positions. The interesting structural feature of 1 is that the three-dimensional framework is an infinite extension of nanoscopic cuboctahedral cages. The framework also contains two types of voids; the larger hydrophobic ones are surrounded by aromatic squarate ligands, while the smaller ones are hydrophilic with hydroxyl groups on the surface connected by bifurcated hydrogen bonding interaction. A variable temperature magnetic study shows spin-canted long-range antiferromagnetic ordering in the low temperature regime.
Asunto(s)
Compuestos Ferrosos/química , Nanoestructuras/química , Cristalografía por Rayos X , Compuestos Ferrosos/síntesis química , Campos Magnéticos , Modelos Moleculares , Estructura Molecular , TemperaturaRESUMEN
Treatment of an aryl-sec-alkyl unsymmetrical thiourea (Tu) with Cu(II)X(2) (X = I, Br) transform the thiourea (Tu) into a thioamidoguanidino (Tag) moiety with concomitant reduction of Cu(II) to Cu(I), which forms a [Cu(2)(I)(µ(2)-X)(2)Tag(2)] (X = I (for A) and X = Br (for B)) complex. Meanwhile, the treatment of same unsymmetrical thiourea (Tu) with Cu(I)X (X = Br) forms a stable cluster with a [Cu(I)(3)(µ(2)-S)(4)Tu(4)X(3)] core (C). Single crystal X-ray diffraction revealed that compounds A and B exhibit 1D chain with a Cu(2)(µ(2)-X)(2) core, whereas compound C is a Cu(I)(3)S(4)Br(3) cluster. Compound A is centrosymmetric due to the trans orientation of two Tag units whereas compound B is ascentric due to the cis orientation of two Tag units. In compound A, the Cu(2)I(2) core is perfectly rhomboidal where the iodine atoms are trans oriented. However in compound B, the Cu(2)Br(2) core is not perfectly rhomboidal (bowl shaped) and the bromine atoms are cis oriented. It is interesting to note that although the Tag moiety in compounds A and B contain two morpholine-O atoms; only one of the morpholine-O atoms (O2) is involved in the generation of three-dimensional network. The Cu(I)(3)S(4)Br(3) cluster in compound C contains one tri- and two tetra-coordinated Cu(I) centers. The Cu(I) cluster in C contains a Cu(2)(µ(2)-S)(2) rhomboidal plane exhibiting a chair and a boat form containing the Cu(I)(3)S(3) unit. In compounds A and B, the two Cu(I) centers are µ(2)-X bridged and have a µ(1)-S linkage, whereas in compound C the linkages are opposite having four µ(2)-S bridges and three µ(1)-Br linkages.
RESUMEN
Iodoarenes are important precursors for fine chemicals and pharmaceuticals. The direct iodination of arenes using molecular iodine (I2) has emerged as an attractive green synthesis method. Most of the direct iodination protocols are still homogeneous systems that require harsh conditions and use or produce toxic products. We report a new heterogeneous catalytic route for the direct aerobic iodination of arenes under mild conditions using a PMoV2 polyoxometalate (POM) embedded in the metal-organic framework (MOF) MIL-101 (PMoV2@MIL-101). The catalyst shows full yield for the conversion of mesitylene to 2-iodomesitylene at a rate that is similar to the homogeneous POM system. Moreover, the catalyst is applicable for a wide range of substrates in an oxygen atmosphere without using any co-catalysts or sacrificial agents. To the best of our knowledge, this is the first report on designing a sustainable and green MOF-based heterogeneous catalytic system for the direct iodination reaction using molecular oxygen and iodine.