RESUMEN
3D printing is an additive manufacturing technology with the help of digital control. Since FDA approved the first 3D printing drug in 2015, its research enthusiasm in the pharmaceutical field has been increasing year by year. In printing technology, fused deposition molding (FDM) and semi-solid extrusion (SSE) are the two most widely used extrusion molding technologies. In this review, recent advances of pharmaceutical 3D printing extrusion molding technology are reviewed from six aspects: mechanism, equipment, pharmaceutical excipients, applications, design and industrialization prospects of extrusion molding technology.
RESUMEN
Chinese herbs are mostly used to make decoction, which would form precipitation after standing for cooling and abandoned by patients. Processing with vinegar can change the property of the herbal pieces, such as the transfer rate of heavy metal into decoction. To analyze the transfer rate change of heavy metal in the decoction and precipitation of Curcuma phaeocaulis before and after processing with vinegar, inductively coupled plasma mass spectrometry (ICP-MS) was used to establish the determination method on five heavy metals in C. phaeocaulis, including Copper (Cu), arsenic (As), chromium (Cd), lead (Pb), mercury (Hg), using microwave to digest the samples, indium (In) as the internal standard, and national level standard material tea leaves GBW10016 (GSB-7 tea) as the quality control standard material. Then, the content of five heavy metals in the herbal pieces, decoction and five heavy metals of 6 representative batches of C. phaeocaulis and their vinegar-processing products was determinated. After computation, the transfer rates of heavy metals in the decoction and precipitation of C. phaeocaulis Val. before and after the processing with vinegar were obtained. The results showed that, after the processing with vinegar, total transfer rate of Pb and Hg was decreased significantly; total transfer rate of Cd and Cu was slightly decreased; total transfer rate of As was slightly increased, however heavy metals in all the precipitation were decreased. The results indicated that processing with vinegar had certain influence on heavy metal transfer rate, with certain synergistic and attenuated effect.
RESUMEN
To compare the differences of essential oils extracted from Curcumae Rhizoma with different origins. The TIC of the essential oils of Curcumae Rhizoma from three different origins recorded by CP(2010) , were investigated by GC-MS combined with automated mass spectral deconvolution and identification system(AMDIS),steps as follow: firstly, overlapped peaks were resolved by AMDIS,secondly, NIST11.L standard MS spectral database combined with retention index were used to assist qualitative analysis, thirdly, the peak area of each split peak were determined by choosing the characteristic fragment ion peak, finally, the relative percentage contents of each compounds were determined through peak area normalization method. The results showed that the components of the essential oils of Curcumae Rhizoma from three origins were different from each other at various degree. In conclusion, the types and content of essential oils could be an indicator to evaluate the quality of Curcumae Rhizoma from different origins and its geoherbalism.
RESUMEN
The change of the effective components (liquiritin, glycyrrhizic acid, liquiritigenin, isoliquiritigenin) contents of Glycyrrhizae Radix et Rhizoma (GRR) before and after compatibilities in Sini decoction was studied in this paper. Taking single GRR decoction, GRR-Aconiti Lateralis Radix Praeparata (ALRP) decoction, GRR-Zingiberis Rhizoma (ZR) decoction and Sini decoction as test samples, the contents changing of the four effective components of GRR were measured by HPLC. The results showed that the contents of the four effective components of GRR in the single GRR decoction was higher than that in other samples, and the sequence was single GRR decoction > GRR-ZR decoction > GRR-ALRP decoction > Sini decoction. The contents of liquiritin were 11.18, 9.89, 9.67, 9.17 mg · g(-1); the contents of glycyrrhizic acid were 20.76, 15.58, 11.30, 8.52 mg · g(-1); the contents of liquiritigenin were 0.66, 0.57, 0.45, 0.24 mg · g(-1); the contents of isoliquiritigenin were 0.14, 0.07, 0.03, 0.01 mg · g(-1). Therefore, the effective components of GRR decreased obviously after GRR compatibility with ZR providing scientific basis for GRR relieving the strong nature of ZR. The effective components of GRR decreased sharply after GRR compatibility with ALRP providing scientific support for the material foundation research of GRR reducing the toxicity of ALRP. The effective components of GRR decreased further in Sini decoction indicating that the three medicines in Sini decoction were interactional, which reflecting the scientific connotation of the mutual-restraint/mutual-detoxication, mutual-promotion/mutual-assistance compatibilities in Sini decoction.