Halogenated 9H-Indeno[1,2-b]Pyrazine-2,3-Dicarbonitrile End Groups Based Asymmetric Non-Fullerene Acceptors for Green Solvent-Processable, Additive-Free, and Stable Organic Solar Cells.

Non-fullerene acceptors (NFAs) significantly enhance photovoltaic performance in organic solar cells (OSCs) using halogenated solvents and additives. However, these solvents are environmentally detrimental and unsuitable for industrial-scale production, and the issue of OSCs' poor long-term stability persists. This report introduces eight asymmetric NFAs (IPCnF-BBO-IC2F, IPCnF-BBO-IC2Cl, IPCnCl-BBO-IC2F, and IPCnCl-BBO-IC2Cl, where n = 1 and 2). These NFAs comprise a 12,13-bis(2-butyloctyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2'',3'':4',5']thieno[2',3':4,5]pyrrolo[3,2-g]thieno[2',3':4,5]thieno-[3,2-b]indole (BBO) core. One end of the core attaches to a mono- or di-halogenated 9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) end group (IPC1F, IPC1Cl, IPC2F, or IPC2Cl), while the other end connects to a 2-(5,6-dihalo-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC) end group (IC2F or IC2Cl). The optical and electronic properties of these NFAs can be finely tuned by controlling the number of halogen atoms. Crucially, these NFAs demonstrate excellent compatibility with PM6 even in o-xylene, facilitating the production of additive-free OSCs. The di-halogenated IPC-based NFAs outperform their mono-halogenated counterparts in photovoltaic performance within OSCs. Remarkably, the di-halogenated IPC-based NFAs maintain 94‒98% of their initial PCEs over 2000 h in air without encapsulation, indicating superior long-term device stability. These findings imply that the integration of di-halogenated IPCs in asymmetric NFA design offers a promising route to efficient, stable OSCs manufactured through environmentally friendly processes.

Photo-Curable Lacquer Sap Resin Based on Urushiol-Mimicking, Tyrosine-Containing Additive.

Oriental lacquer sap is attracting considerable attention as a renewable and eco-friendly natural resin with high durability, heat resistance, insulation, insect repellency, and antiseptic and antibacterial properties. However, to ensure excellent coating performance, it is necessary to improve the drying/curing process of lacquer sap with a time-consuming drying time at high humidity [relative humidity (RH), 70-90%] and ambient temperature (20-30 °C). Drawing on an understanding of the polymerization mechanism of urushiol, the main component of the lacquer sap consisted of a water-in-oil (W/O) emulsion, and this study presents an eco-friendly additive that mimics the structure-function of urushiol composed of a polar catechol head group and a nonpolar hydrocarbon tail. A photo-curable lacquer sap was thus developed by adding a tyrosine amino acid-based lipid agent (denoted as Y-ADDA), which allows faster and more effective drying/curing at lower humidity while maintaining the nature-derived properties of lacquer sap. Y-ADDA easily coassembles with urushiol in the W/O emulsion droplets, thereby significantly accelerating the formation of a polymer network along with urushiol during water evaporation leading to fast drying/curing under ultraviolet (UV) light irradiation at low humidity (∼50% RH). The UV-cured lacquer sap resins showed higher performance in terms of film processing and physicochemical properties compared with that of the lacquer containing only tyrosine amino acids without aliphatic tail conjugation, N-(9-fluorenylmethoxycarbonyl)-O-tert-butyl-l-tyrosine Fmoc-Tyr(tBu)-OH. Furthermore, the drying and curing times, film morphology, transmittance, hardness, and adhesion strength of the UV-cured lacquer were markedly superior compared to those of shellac, a general eco-friendly fast-drying primer. The study provides useful strategies and insights to promote the industrial application of lacquer sap resins by employing biocompatible nanoagents developed with an understanding of the curing mechanism of natural resins and from the viewpoint of green and sustainable chemistry perspective.

Multicompartment Vesicles Formation by Emulsification-Induced Assembly of Poly(ethylene oxide)-block-poly(ε-caprolactone) and Their Dual-Loading Capability.

Emulsification-induced assembly is employed to allow structural diversity in nanoaggregates of a biocompatible amphiphilic polymer, poly(ethylene oxide)-block-poly(ε-caprolactone). Onion-like vesicles are efficiently produced by tuning the interfacial instability of the oil-in-water emulsion. The increase in the polymer concentration and use of the organic solvents with a low interfacial tension between water and the oil phase lead to a strong tendency of emulsion droplets to generate the onion-like vesicles. The vesicular networks and fibers are also obtained by controlling the concentration and type of the surfactant, respectively. Interestingly, the onion-like vesicles composed of alternating walls and water channels and the vesicular networks originated from a string of vesicles show dual-loading ability for hydrophobic and hydrophilic dyes but slightly different loading capacities. This result indicates that the development of a methodology to fabricate well-defined, unique nanostructures, such as multivesicular and multilamellar nanostructures, and subsequent elucidation of their structure-property relationships can provide useful guidance in the design of novel biomedical materials.

Structure-Dependent Antimicrobial Theranostic Functions of Self-Assembled Short Peptide Nanoagents.

Gadolinium (Gd[III])-based nanoaggregates are potential noninvasive magnetic resonance imaging (MRI) probes with excellent spatial and temporal resolution for cancer diagnosis. Peptides conjugated with Gd3+ can aid in supramolecular scaffolding for MRI nanoagents because of their inherent biocompatibility and degradability. We report here a strategy to tune the MR relaxivity of tumor cell-targeted nanoagents and enhance the antimicrobial and anticancer activities of nanoagents based on rationally designed antimicrobial peptide (AMP) assembly. A tripeptide with glycyl-l-histidyl-l-lysine (GHK) capable of Gd3+ chelation was attached to short AMPs containing pyrazole amino acids that spontaneously assembled as a function of the number of hydrophobic amino acid residues and the peptide length of AMPs. Aqueous coassembly of GHK with tumor-targeting, cyclic arginine-glycine-aspartic acid (cRGD)-tagged AMPs resulted in the formation of micelles, fibrils, vesicles, sheets, and planar networks. Interestingly, the two-dimensional planar network nanostructure showed less antibacterial activity and tumor cell cytotoxicity but greater drug loading/delivery and magnetic resonance signaling than micelles because of its intrinsic structural characteristics. This study can provide a rational approach for the design and fabrication of clinically useful nanoagents.

Toxicity of zinc oxide nanoparticles in rats treated by two different routes: single intravenous injection and single oral administration.

Toxicokinetics of zinc oxide nanoparticles (ZnONP) was studied in rats via a single intravenous (iv) injection and a single oral administration (3 mg/kg or 30 mg/kg), respectively. Blood concentrations of zinc (Zn) were monitored for 7 d and tissue distribution were determined in liver, kidneys, lung, spleen, thymus, brain, and testes. To ascertain the excretion of ZnONP, Zn levels in urine and feces were measured for 7 d. ZnONP were not readily absorbed from the gastrointestinal tract (GIT) after oral administration and were excreted mostly in feces. When the nanoparticles were injected iv to rats at a dose of 30 mg/kg, peak concentration appeared at 5 min but returned to normal range by d 2 (48 h after injection). ZnONP were distributed mainly to liver, kidneys, lung, and spleen, but not to thymus, brain, and testes. The distribution level was significantly decreased to normal by d 7. Feces excretion levels after iv injection supported biliary excretion of ZnONP. In rats injected iv with 30 mg/kg, mitotic figures in hepatocytes were significantly increased and multifocal acute injuries with dark brown pigment were noted in lungs, while no significant damage was observed in rats treated orally with the same dosage.

Thermodynamically stable plumber's nightmare structures in block copolymers.

Block copolymer self-assembly affords diverse nanostructures, spanning from spheres and cylinders to networks, offering meticulous control over properties and functionalities at the nanoscale. However, creating thermodynamically stable network structures with high packing frustration remains a challenge. In this study, we report a methodology to access diverse network structures such as gyroid, diamond, and primitive phases from diblock copolymers using end group and linker chemistry. The stability of the medial packing of polymer chain ends (plumber's nightmare structure) over skeletal aggregation (gyroid) is attributed to the interplay between the strength of the end-end interactions and the initial shape of the curvature. Our study establishes an approach to develop tailored network structures from block copolymers, providing an important platform for using block copolymers in nanotechnology applications.

Electrochemical synthesis of core-shell nanoparticles by seed-mediated selective deposition.

Conventional solvothermal synthesis of core-shell nanoparticles results in them being covered with surfactant molecules for size control and stabilization, undermining their practicality as electrocatalysts. Here, we report an electrochemical method for the synthesis of core-shell nanoparticles directly on electrodes, free of surfactants. By implementation of selective electrodeposition on gold cores, 1st-row transition metal shells were constructed with facile and precise thickness control. This type of metal-on-metal core-shell synthesis by purely electrochemical means is the first of its kind. The applicability of the nanoparticle decorated electrodes was demonstrated by alkaline oxygen evolution catalysis, during which the Au-Ni example displayed stable catalysis with low overpotential.

Myocardial injury in a pediatric patient with diabetic ketoacidosis: A case report.

RATIONALE: Diabetic ketoacidosis (DKA) can cause several complications. Among them, cardiac complications are the most fatal and difficult to detect. Cardiac markers are prognostic factors for morbidity and mortality in adult patients with DKA. But, there have been very few discussed cases in pediatrics. We report a case of severe DKA in child with elevated cardiac enzymes and prolonged QT interval. PATIENT CONCERNS: A 12-year-old girl admitted by nausea, vomiting, and lethargy for 1 day. DIAGNOSES: Her blood sugar level was initially undetectable by the capillary blood glucose meter, and blood gas analysis showed severe DKA with elevated cardiac enzymes and prolonged QT interval. INTERVENTIONS: The patient was admitted to hospital and intensive intravenous fluid and regular insulin infusion were administered. OUTCOMES: After 5 days of supportive care, the patient was fully recovered, discharged, and followed up in an outpatient clinic. LESSONS: Since the relationship between DKA and myocardial injury has not been clearly elucidated, pediatricians and emergency physicians should remain careful throughout the recovery time as it can lead to life-threatening conditions in various courses.

Conjugation-Free Multilamellar Protein-Lipid Hybrid Vesicles for Multifaceted Immune Responses.

Various lipid-based nanocarriers have been developed for the co-delivery of protein antigens with immunological adjuvants. However, their in vivo potency in vaccine delivery is limited by structural instability, which causes off-target delivery and low cross-presentation efficacies. Recent works employ covalent cross-linking to stabilize the lipid nanostructures, though the immunogenicity and side effects of chemically modified protein antigens and lipids can cause a long-lasting safety issue. Here robust "conjugation-free" multilamellar protein antigen-lipid hybrid nanovesicles (MPLVs) are introduced through the antigen-mediated self-assembly of unilamellar lipid vesicles for the co-delivery of protein antigens and immunologic adjuvants. The nanocarriers coated with monophosphoryl lipid A and hyaluronic acids elicit highly increase antigen-specific immune responses in vitro and in vivo. The MPLVs increase the generation of immunological surface markers and cytokines in mouse-derived bone-marrow dendritic cells compared to soluble antigens with adjuvants. Besides, the vaccination of mice with the MPLVs significantly increase the production of anti-antigen antibody and interferon-gamma via the activation of CD4+ and CD8+ T cells, respectively. These findings suggest that MPLVs can serve as a promising nanovaccine delivery platform for efficient antigen cross-presentation through the efficient co-delivery of protein antigens with adjuvants.

Helical Assembly of Flavin Mononucleotides on Carbon Nanotubes as Multimodal Near-IR Hg(II)-Selective Probes.

The development of novel methods to detect mercury is of paramount importance owing to the impact of this metal on human health and the environment. We observed that flavin mononucleotide (FMN) and its helical assembly with a single-walled carbon nanotube (SWNT) selectively bind Hg2+ arising from HgCl2 and MeHgCl. Absorption spectroscopic studies show that FMN preferentially forms a 2:1 rather than a 1:1 complex with Hg2+ at high FMN concentrations. On the basis of the analogy to the thymine-Hg-thymine complex, it is proposed that the 2:1 complex between FMN and Hg2+ comprises a Hg-bridged pair of FMN groups, regardless of the presence of SWNT. Upon addition of as little as a few hundred nanomoles of Hg2+, both FMN and FMN-SWNT exhibit absorption and photoluminescence (PL) changes. Moreover, FMN-SWNT displays simultaneous multiple sigmoidal changes in PL of SWNT tubes having different chiral vectors. Assessment of binding affinities using the Hill equation suggests that 2:1 and 1:1 complexes form between Hg2+ and FMN groups on the FMN-SWNT. Theoretical calculations indicate that optical changes of the FMN-SWNT originate from Hg-mediated conformational changes occurring on the helical array of FMN on the SWNT. High-resolution transmission electron microscopy revealed that the presence of Hg2+ in complexes with the FMN-SWNT enables visualization of helical periodic undulation of FMN groups along SWNT without the need for staining. Circular dichroism (CD) study revealed that FMN-SWNT whose CD signal mainly originates from FMN decreases dichroic bands upon the addition of Hg2+ owing to the formation of a centrosymmetric FMN-Hg-FMN triad on SWNT. The binding mode specificity and multimodal changes observed in response to Hg2+ ions suggest that systems based on FMN-SWNT can serve as in vivo NIR beacons for the detection of various mercury derivatives.

Syringeable immunotherapeutic nanogel reshapes tumor microenvironment and prevents tumor metastasis and recurrence.

The low response rate of current cancer immunotherapy suggests the presence of few antigen-specific T cells and a high number of immunosuppressive factors in tumor microenvironment (TME). Here, we develop a syringeable immunomodulatory multidomain nanogel (iGel) that overcomes the limitation by reprogramming of the pro-tumoral TME to antitumoral immune niches. Local and extended release of immunomodulatory drugs from iGel deplete immunosuppressive cells, while inducing immunogenic cell death and increased immunogenicity. When iGel is applied as a local postsurgical treatment, both systemic antitumor immunity and a memory T cell response are generated, and the recurrence and metastasis of tumors to lungs and other organs are significantly inhibited. Reshaping of the TME using iGel also reverts non-responding groups to checkpoint blockade therapies into responding groups. The iGel is expected as an immunotherapeutic platform that can reshape immunosuppressive TMEs and synergize cancer immunotherapy with checkpoint therapies, with minimized systemic toxicity.

Templated synthesis of cubic crystalline single networks having large open-space lattices by polymer cubosomes.

The synthesis of biophotonic crystals of insects, cubic crystalline single networks of chitin having large open-space lattices, requires the selective diffusion of monomers into only one of two non-intersecting water-channel networks embedded within the template, ordered smooth endoplasmic reticulum (OSER). Here we show that the topology of the circumferential bilayer of polymer cubosomes (PCs)-polymeric analogues to lipid cubic membranes and complex biological membranes-differentiate between two non-intersecting pore networks embedded in the cubic mesophase by sealing one network at the interface. Consequently, single networks having large lattice parameters (>240 nm) are synthesized by cross-linking of inorganic precursors within the open network of the PCs. Our results pave the way to create triply periodic structures of open-space lattices as photonic crystals and metamaterials without relying on complex multi-step fabrication. Our results also suggest a possible answer for how biophotonic single cubic networks are created, using OSER as templates.

Peroxisome-targeted Supramolecular Nanoprobes Assembled with Pyrene-labelled Peptide Amphiphiles.

Despite the versatile metabolic functions of peroxisomes such as lipid synthesis and fatty acid oxidation and their relevance to genetically inherited diseases, namely, peroxisome biogenesis disorders and peroxisomal enzyme deficiency, there is not much research on peroxisome-targeting therapeutics. Herein we present supramolecular nanostructured probes based on the self-assembly of peptide amphiphiles (PAs) having peroxisome-targeting ability in mammalian cells. The PA was designed to include the peroxisome-targeting tripeptide (SKL) and a fluorescent dye (pyrene). It was revealed that the presence of the SKL-appended carboxyl terminal group of PA, the extent of α-helical nature of the peptide block, and the fibrillar morphology of nano-assemblies affected the targeting efficiency of PA supramolecular nanoprobe. The simple modification of PAs by the peroxisome-targeting strength prediction showed an enhanced peroxisome specificity, as expected. This work provides important insights into designing subcellular organelle-targeting nanoparticles for next-generation nanomedicines.

Columnar-Structured Low-Concentration Donor Molecules in Bulk Heterojunction Organic Solar Cells.

We investigate the arrangement of donor molecules in vacuum-deposited bulk heterojunction (BHJ) 1,1-bis-(4-bis(4-methyl-phenyl)-amino-phenyl)-cyclohexane (TAPC):C70-based organic solar cells (OSCs). Even a low dose of donors (∼10%) forms columnar structures that provide pathways for efficient hole transport in the BHJ layer; however, these structures disappear at donor concentrations below 10%, generating disconnected and isolated hole pathways. The formation of columnar donor structures is confirmed by the contrast of the contact potential difference, measured by Kelvin probe force microscopy, and by the trap-assisted charge injection at low donor concentrations. The mobility of electrons and holes is well balanced in OSCs owing to the preservation of the hole mobility at such low donor concentrations, consequently maximizing the internal quantum efficiency of the OSCs. A high power conversion efficiency of 6.24% was achieved in inverted TAPC:C70 (1:9) OSCs.

A Nonchlorinated Solvent-Processable Fluorinated Planar Conjugated Polymer for Flexible Field-Effect Transistors.

High carrier mobilities have recently been achieved in polymer field effect transistors (FETs). However, many of these polymer FET devices require the use of chlorinated solvents such as chloroform (CF), chlorobenzene (CB), and o-dichlorobenzene (DCB) during fabrication. The use of these solvents is highly restricted in industry because of health and environmental issues. Here, we report the synthesis of a low band gap (1.43 eV, 870 nm) semiconducting polymer (PDPP2DT-F2T2) having a planar geometry, which can be readily processable with nonchlorinated solvents such as toluene (TOL), o-xylene (XY), and 1,2,4-trimethylbenzene (TMB). We performed structural characterization of PDPP2DT-F2T2 films prepared from different solvents, and the electrical properties of the films were measured in the context of FETs. The devices exhibited an ambipolar behavior with hole dominant transport. Hole mobilities increased with increasing boiling point (bp) of the nonchlorinated solvents: 0.03, 0.05, and 0.10 cm2 V-1 s-1 for devices processed using TOL, XY, and TMB, respectively. Thermal annealing further improved the FET performance. TMB-based polymer FETs annealed at 200 °C yielded a maximum hole mobility of 1.28 cm2 V-1 s-1, which is far higher than the 0.43 cm2 V-1 s-1 obtained from the CF-based device. This enhancement was attributed to increased interchain interactions as well as improved long-range interconnection between fibrous domains. Moreover, all of the nonchlorinated solutions generated purely edge-on orientations of the polymer chains, which is highly beneficial for carrier transport in FET devices. Furthermore, we fabricated an array of flexible TMB-processed PDPP2DT-F2T2 FETs on the plastic PEN substrates. These devices demonstrated excellent carrier mobilities and negligible degradation after 300 bending cycles. Overall, we demonstrated that the organized assembly of polymer chains can be achieved by slow drying using high bp nonchlorinated solvents and a post thermal treatment. Furthermore, we showed that polymer FETs processed using high bp nonhalogenated solvents may outperform those processed using halogenated solvents.

Structure-Property Relationships of Semiconducting Polymers for Flexible and Durable Polymer Field-Effect Transistors.

We report high-performance top-gate bottom-contact flexible polymer field-effect transistors (FETs) fabricated by flow-coating diketopyrrolopyrrole (DPP)-based and naphthalene diimide (NDI)-based polymers (P(DPP2DT-T2), P(DPP2DT-TT), P(DPP2DT-DTT), P(NDI2OD-T2), P(NDI2OD-F2T2), and P(NDI2OD-Se2)) as semiconducting channel materials. All of the polymers displayed good FET characteristics with on/off current ratios exceeding 107. The highest hole mobility of 1.51 cm2 V-1 s-1 and the highest electron mobility of 0.85 cm2 V-1 s-1 were obtained from the P(DPP2DT-T2) and P(NDI2OD-Se2) polymer FETs, respectively. The impacts of the polymer structures on the FET performance are well-explained by the interplay between the crystallinity, the tendency of the polymer backbone to adopt an edge-on orientation, and the interconnectivity of polymer fibrils in the film state. Additionally, we demonstrated that all of the flexible polymer-based FETs were highly resistant to tensile stress, with negligible changes in their carrier mobilities and on/off ratios after a bending test. Conclusively, these high-performance, flexible, and durable FETs demonstrate the potential of semiconducting conjugated polymers for use in flexible electronic applications.

Mitochondria localization induced self-assembly of peptide amphiphiles for cellular dysfunction.

Achieving spatiotemporal control of molecular self-assembly associated with actuation of biological functions inside living cells remains a challenge owing to the complexity of the cellular environments and the lack of characterization tools. We present, for the first time, the organelle-localized self-assembly of a peptide amphiphile as a powerful strategy for controlling cellular fate. A phenylalanine dipeptide (FF) with a mitochondria-targeting moiety, triphenyl phosphonium (Mito-FF), preferentially accumulates inside mitochondria and reaches the critical aggregation concentration to form a fibrous nanostructure, which is monitored by confocal laser scanning microscopy and transmission electron microscopy. The Mito-FF fibrils induce mitochondrial dysfunction via membrane disruption to cause apoptosis. The organelle-specific supramolecular system provides a new opportunity for therapeutics and in-depth investigations of cellular functions.Spatiotemporal control of intracellular molecular self-assembly holds promise for therapeutic applications. Here the authors develop a peptide consisting of a phenylalanine dipeptide with a mitochondrial targeting moiety to form self-assembling fibrous nanostructures within mitochondria, leading to apoptosis.

Skin Corrosion and Irritation Test of Nanoparticles Using Reconstructed Three-Dimensional Human Skin Model, EpiDermTM.

Effects of nanoparticles (NPs) on skin corrosion and irritation using three-dimensional human skin models were investigated based on the test guidelines of Organization for Economic Co-operation and Development (OECD TG431 and TG439). EpiDermTM skin was incubated with NPs including those harboring iron (FeNPs), aluminum oxide (AlNPs), titanium oxide (TNPs), and silver (AgNPs) for a defined time according to the test guidelines. Cell viabilities of EpiDermTM skins were measured by the 3-(4, 5-dimethylthi-azol-2-yl)-2.5-diphenyltetrazolium bromide based method. FeNPs, AlNPs, TNPs, and AgNPs were non-corrosive because the viability was more than 50% after 3 min exposure and more than 15% after 60 min exposure, which are the non-corrosive criteria. All NPs were also non-irritants, based on viability exceeding 50% after 60 min exposure and 42 hr post-incubation. Release of interleukin 1-alpha and histopathological analysis supported the cell viability results. These findings suggest that FeNPs, AlNPs, TNPs, and AgNPs are 'non-corrosive' and 'non-irritant' to human skin by a globally harmonized classification system.

Electric-Field-Assisted Assembly of Polymer-Tethered Gold Nanorods in Cylindrical Nanopores.

In this report, we demonstrate the confined assembly of polymer-tethered gold nanorods in anodic aluminum oxide (AAO) channels with the assistance of electric field (EF). Various interesting hybrid assemblies, such as single-, double-, triple-, or quadruple-helix, linear, and hexagonally packed structures are obtained by adjusting pore size in AAO channels, ligand length, and EF orientation. Correspondingly, surface plasmonic property of the assemblies can thus be tuned. This strategy, by coupling of external-field and cylindrically confined assembly, is believed to be a promising approach for generating ordered hybrid assemblies with hierarchical structures, which may find potential applications in photoelectric devices, biosensors, and data storage devices.

Developmental toxicity of intravenously injected zinc oxide nanoparticles in rats.

Recent toxicity studies of zinc oxide nanoparticles by oral administration showed relatively low toxicity, which may be resulted from low bioavailability. So, the intrinsic toxicity of zinc oxide nanoparticles needs to be evaluated in the target organs by intravenous injection for full systemic concentration of the administered dosage. Although the exposure chance of injection route is low compared to oral and/or inhalation route, it is important to see the toxicity with different exposure routes to get better risk management tool. In this study, the effects of zinc oxide nanoparticles on dams and fetuses were investigated in rats after intravenous injection (5, 10, and 20 mg/kg) from gestation day 6 to 20. Two of 20 dams in the 20 mg/kg treatment group died during the treatment period. Hematological examination and serum biochemistry showed dose-dependent toxicity in treated dams. Histopathological analysis of treated dams revealed multifocal mixed cell infiltration and thrombosis in lung, tubular dilation in kidneys, and extramedullary hemopoiesis in liver. Total dead fetuses (post-implantation loss) were increased and the body weight of fetus was decreased in the 20 mg/kg treatment group. Statistical differences in corpora lutea, resorption, placental weight, morphological alterations including external, visceral and skeletal malformations were not observed in treated groups. Based on the data, lowest observed adverse effect level of injection route was suggested to be 5 mg/kg in dams and no observed adverse effect level was suggested to be 10 mg/kg in fetal developmental toxicity.