RESUMEN
Objective@#Little is known about the effects of using different expert-determined reference standards when evaluating the performance of deep learning-based automatic detection (DLAD) models and their added value to radiologists. We assessed the concordance of expert-determined standards with a clinical gold standard (herein, pathological confirmation) and the effects of different expert-determined reference standards on the estimates of radiologists’ diagnostic performance to detect malignant pulmonary nodules on chest radiographs with and without the assistance of a DLAD model. @*Materials and Methods@#This study included chest radiographs from 50 patients with pathologically proven lung cancer and 50 controls. Five expert-determined standards were constructed using the interpretations of 10 experts: individual judgment by the most experienced expert, majority vote, consensus judgments of two and three experts, and a latent class analysis (LCA) model. In separate reader tests, additional 10 radiologists independently interpreted the radiographs and then assisted with the DLAD model. Their diagnostic performance was estimated using the clinical gold standard and various expertdetermined standards as the reference standard, and the results were compared using the t test with Bonferroni correction. @*Results@#The LCA model (sensitivity, 72.6%; specificity, 100%) was most similar to the clinical gold standard. When expertdetermined standards were used, the sensitivities of radiologists and DLAD model alone were overestimated, and their specificities were underestimated (all p-values < 0.05). DLAD assistance diminished the overestimation of sensitivity but exaggerated the underestimation of specificity (all p-values < 0.001). The DLAD model improved sensitivity and specificity to a greater extent when using the clinical gold standard than when using the expert-determined standards (all p-values < 0.001), except for sensitivity with the LCA model (p = 0.094). @*Conclusion@#The LCA model was most similar to the clinical gold standard for malignant pulmonary nodule detection on chest radiographs. Expert-determined standards caused bias in measuring the diagnostic performance of the artificial intelligence model.
RESUMEN
Diagnosis and analysis of occlusal relationships are important factors in prosthetic treatment. A thorough occlusion analysis and evaluation should be performed before treatment to restore a stable interocclusal relationship. Analysis and evaluation are essential during the treatment process and at regular follow-ups. Recently, with the development of dental equipment and digital processing methods, new quantitative analysis methods that can record the patient’s occlusal relationship have been introduced. Among them, the T-Scan Novus (Tekscan Inc., S. Boston, MA, USA) displays the strength of the initial contact point and the occlusal contact point of the teeth using a pressure sensor. With this, occlusal contact time of the teeth, anteroposterior and left-right balance of occlusal force can be compared. The Dental prescale II (GC Co., Tokyo, Japan) scans the occlusal contact point using a pressure-sensing film and analyzes the density of the contact point.It can measure the distribution and strength of the occlusal force of the teeth in the most natural occlusion state. Based on this, appropriate prosthetic treatment (four-unit fixed partial denture, removable partial denture, complete denture, and complete oral restoration cases) was performed according to the area and extent of the patient’s tooth loss. The patient’s occlusion at the first visit, treatment stage, right after treatment, and regular follow-up were compared and evaluated using a quantitative method for appropriate occlusion analysis using T-Scan Novus and Dental prescale II. This report enhances the understanding of occlusion analysis during prosthetic restoration. The results satisfied both the clinician and patients in terms of function and aesthetics.
RESUMEN
Background@#The purpose of this study was to investigate the role of opioid-based intravenous patient-controlled analgesia (IV PCA) or continuous brachial plexus block (BPB) in controlling rebound pain after distal radius fracture (DRF) fixation under BPB as well as total opioid consumption. @*Methods@#A total of 66 patients undergoing surgical treatment for a displaced DRF with volar plate fixation were randomized to receive a single infraclavicular BPB (BPB only group) (n = 22), a single infraclavicular BPB with IV PCA (IV PCA group) (n = 22), or a single infraclavicular BPB with continuous infraclavicular BPB (continuous block group) (n = 22). The visual analog scale (VAS) for pain and the amount of pain medication were recorded at 4, 6, 9, 12, 24, and 48 h and two weeks postoperatively. @*Results@#At postoperative 9 h, the pain VAS score was significantly higher in the BPB only group (median: 2; Q1, Q3 [1, 3]) than in the IV PCA (0 [0, 1.8], P = 0.006) and continuous block groups (0 [0, 0.5], P = 0.009). At postoperative 12 h, the pain VAS score was significantly higher in the BPB only group (3 [3, 4]) than in the continuous block group (0.5 [0, 3], P = 0.004). The total opioid equivalent consumption (OEC) was significantly higher in the IV PCA group (350.3 [282.1, 461.3]) than in the BPB only group (37.5 [22.5, 75], P < 0.001) and continuous block group (30 [15, 75], P < 0.001); however, OEC was not significantly different between the BPB only group and the continuous block group (P = 0.595). @*Conclusions@#Although continuous infraclavicular BPB did not reduce total opioid consumption compared to BPB only, this method is effective for controlling rebound pain at postoperative 9 and 12 h following DRF fixation under BPB.
RESUMEN
Background@#The preemptive visceral analgesic effect of regional nerve block has not been adequately investigated to date. We evaluated the preemptive visceral analgesic effect of thoracic paravertebral block (TPVB) in patients undergoing laparoscopic cholecystectomy (LC) in whom pre-incisional rectus sheath block (RSB) was used to minimize somatic surgical pain. @*Methods@#In this prospective, randomized, assessor-blind study, 70 patients scheduled for elective LC were randomly assigned to the pre-TPVB (n = 35) or the post-TPVB (n = 35) group. Both groups received pre-incisional RSB, and patients in the pre-TPVB group received TPVB before skin incision while those in the post-TPVB group received TPVB after skin closure. The primary outcome was the total rescue analgesic consumption (morphine equianalgesic dose) during the 24 h post-surgery. The secondary outcomes were the cumulative analgesic consumption and pain intensity for 24 h after surgery, and adverse events. @*Results@#Pre-TPVB significantly reduced total rescue analgesic consumption (estimated mean [95% CI]) during the 24 h after surgery than post-TPVB (16.9 [14.5, 19.3] vs. 25.3 [22.8, 27.7] mg, estimated difference: -8.3 [-11.8, -4.9], P < 0.001). The cumulative rescue analgesic consumption was significantly lower in the pre-TPVB group from 2–24 h after surgery (P < 0.001). The postoperative pain intensity was significantly lower in the pre-TPVB group as well at 0.5–6 h after surgery. There were no adverse events in both groups. @*Conclusions@#Pre-incisional TPVB conferred a significant preemptive visceral analgesic effect in patients undergoing LC, and significantly reduced the amount of postoperative opioid consumption.
RESUMEN
Gastric adenocarcinoma is among the top causes of cancer-related death and is one of the most commonly diagnosed carcinomas worldwide. Benzyl isothiocyanate (BITC) has been reported to inhibit the gastric cancer metastasis. In our previous study, BITC induced apoptosis in AGS cells. The purpose of the present study was to investigate the effect of BITC on autophagy mechanism in AGS cells. First, the AGS cells were treated with 5, 10, or 15 μM BITC for 24 h, followed by an analysis of the autophagy mechanism. The expression level of autophagy proteins involved in different steps of autophagy, such as LC3B, p62/SQSTM1, Atg5-Atg12, Beclin1, p-mTOR/mTOR ratio, and class III PI3K was measured in the BITC-treated cells. Lysosomal function was investigated using cathepsin activity and Bafilomycin A1, an autophagy degradation stage inhibitor. Methods including qPCR, western blotting, and immunocytochemistry were employed to detect the protein expression levels. Acridine orange staining and omnicathepsin assay were conducted to analyze the lysosomal function. siRNA transfection was performed to knock down the LC3B gene. BITC reduced the level of autophagy protein such as Beclin 1, class III PI3K, and Atg5-Atg12. BITC also induced lysosomal dysfunction which was shown as reducing cathepsin activity, protein level of cathepsin, and enlargement of acidic vesicle. Overall, the results showed that the BITC-induced AGS cell death mechanism also comprises the inhibition of the cytoprotective autophagy at both initiation and degradation steps.
RESUMEN
Thoracic epidural analgesia is known to have superior perioperative pain control over intravenous opioid analgesia in open abdominal surgery and is an essential enhanced recovery after surgery component in major abdominal surgeries. Recently, the ultrasound-guided thoracic epidural catheter placement (TECP) technique has drawn attention as an alternative for the traditional landmark palpation-based TECP or fluoroscopic-guided TECP technique due to the equipment’s improvement and increased popularity. However, only a small number of studies have introduced the advantages and usefulness of ultrasound-guided TECP. Moreover, a certain level of ultrasound-guided in-plane technique is required to perform this technique. Thus, to apply ultrasound-guided TECP correctly and reduce the likelihood of side effects and complications, the practitioner must have a thorough understanding of the anatomical region, optimal block positioning, device selection, and management. In this technical review, the authors have compared the advantages and disadvantages of ultrasound-guided TECP to traditional techniques and described its technical aspects from patient positioning, ultrasound probe selection and scanning, needle insertion under ultrasound guidance, and successful thoracic epidural catheter insertion confirmation through ultrasound imaging. Additionally, the recommended epidural catheter tip placement level with the extent of its injectate epidural spread is further described in this review in reference to a recent prospective study published by the authors.
RESUMEN
With the rapid development of aesthetic ceramic materials and resin adhesives, the transition from metal ceramic crown to all-ceramic restoration is being actively carried out. When making porcelain restorations, the advantages can be maximized only when appropriate forms and techniques are used. Recently, an esthetic partial-coverage restoration method with supra-gingival margins was introduced by applying a minimally invasive tooth removal method that preserves enamel as much as possible and enhances adhesion efficiency. Through this, various advantages such as minimization of tooth structure removal and ease of excess cement removal can be obtained. In addition, since this manufacturing method does not require cord packing, it is possible to save time for impression taking and reduce patient discomfort. Furthermore, the margins can be clearly obtained without the intervention of gingival fluid or blood, making it possible to manufacture more accurate restorations. In the following cases of patients with partial tooth defects, esthetic ceramic partial-coverage restorations with supra-gingival margin was applied using minimally invasive tooth preparation method according to the concept of adhesive dentistry. Therefore, unnecessary tooth abutment preparation was prevented and residual tooth structure could be preserved as much as possible. After delivery of the ceramic partial-coverage restorations, favorable outcome was obtained.
RESUMEN
With the rapid development of aesthetic ceramic materials and resin adhesives, the transition from metal ceramic crown to all-ceramic restoration is being actively carried out. When making porcelain restorations, the advantages can be maximized only when appropriate forms and techniques are used. Recently, an esthetic partial-coverage restoration method with supra-gingival margins was introduced by applying a minimally invasive tooth removal method that preserves enamel as much as possible and enhances adhesion efficiency. Through this, various advantages such as minimization of tooth structure removal and ease of excess cement removal can be obtained. In addition, since this manufacturing method does not require cord packing, it is possible to save time for impression taking and reduce patient discomfort. Furthermore, the margins can be clearly obtained without the intervention of gingival fluid or blood, making it possible to manufacture more accurate restorations. In the following cases of patients with partial tooth defects, esthetic ceramic partial-coverage restorations with supra-gingival margin was applied using minimally invasive tooth preparation method according to the concept of adhesive dentistry. Therefore, unnecessary tooth abutment preparation was prevented and residual tooth structure could be preserved as much as possible. After delivery of the ceramic partial-coverage restorations, favorable outcome was obtained.
RESUMEN
The evaluation of occlusion using digital methods is easier and simpler in terms of recording, comparison, analysis, and objectivity compared to existing methods such as articulating paper and occlusion foil. The purpose of this case report was utilizing the digital method for evaluating occlusion. The occlusion of patient requiring full veneer crown restoration was evaluated using an intraoral scanner (i500, Medit, Seoul, Korea) at every visit. The occlusion was also assessed using conventional articulating paper and a digital occlusal analysis system (Dental prescale II, GC corp., Tokyo, Japan) for comparison. Throughout the treatment process, the intraoral scanner and the conventional articulating paper method showed similar outcomes. The results suggest that the use of digital evaluation system is highly probable in the near future.
RESUMEN
The evaluation of occlusion using digital methods is easier and simpler in terms of recording, comparison, analysis, and objectivity compared to existing methods such as articulating paper and occlusion foil. The purpose of this case report was utilizing the digital method for evaluating occlusion. The occlusion of patient requiring full veneer crown restoration was evaluated using an intraoral scanner (i500, Medit, Seoul, Korea) at every visit. The occlusion was also assessed using conventional articulating paper and a digital occlusal analysis system (Dental prescale II, GC corp., Tokyo, Japan) for comparison. Throughout the treatment process, the intraoral scanner and the conventional articulating paper method showed similar outcomes. The results suggest that the use of digital evaluation system is highly probable in the near future.
RESUMEN
Purpose@#Although chest CT has been discussed as a first-line test for coronavirus disease 2019 (COVID-19), little research has explored the implications of CT exposure in the population. To review chest CT protocols and radiation doses in COVID-19 publications and explore the number needed to diagnose (NND) and the number needed to predict (NNP) if CT is used as a first-line test. @*Materials and Methods@#We searched nine highly cited radiology journals to identify studies discussing the CT-based diagnosis of COVID-19 pneumonia. Study-level information on the CT protocol and radiation dose was collected, and the doses were compared with each national diagnostic reference level (DRL). The NND and NNP, which depends on the test positive rate (TPR), were calculated, given a CT sensitivity of 94% (95% confidence interval [CI]: 91%–96%) and specificity of 37% (95% CI: 26%–50%), and applied to the early outbreak in Wuhan, New York, and Italy. @*Results@#From 86 studies, the CT protocol and radiation dose were reported in 81 (94.2%) and 17 studies (19.8%), respectively. Low-dose chest CT was used more than twice as often as standarddose chest CT (39.5% vs.18.6%), while the remaining studies (44.2%) did not provide relevant information. The radiation doses were lower than the national DRLs in 15 of the 17 studies (88.2%) that reported doses. The NND was 3.2 scans (95% CI: 2.2–6.0). The NNPs at TPRs of 50%, 25%, 10%, and 5% were 2.2, 3.6, 8.0, 15.5 scans, respectively. In Wuhan, 35418 (TPR, 58%; 95% CI: 27710–56755) to 44840 (TPR, 38%; 95% CI: 35161–68164) individuals were estimated to have undergone CT examinations to diagnose 17365 patients. During the early surge in New York and Italy, daily NNDs changed up to 5.4 and 10.9 times, respectively, within 10 weeks. @*Conclusion@#Low-dose CT protocols were described in less than half of COVID-19 publications, and radiation doses were frequently lacking. The number of populations involved in a first-line diagnostic CT test could vary dynamically according to daily TPR; therefore, caution is required in future planning.
RESUMEN
Objective@#We aimed to develop a deep neural network for segmenting lung parenchyma with extensive pathological conditions on non-contrast chest computed tomography (CT) images. @*Materials and Methods@#Thin-section non-contrast chest CT images from 203 patients (115 males, 88 females; age range, 31–89 years) between January 2017 and May 2017 were included in the study, of which 150 cases had extensive lung parenchymal disease involving more than 40% of the parenchymal area. Parenchymal diseases included interstitial lung disease (ILD), emphysema, nontuberculous mycobacterial lung disease, tuberculous destroyed lung, pneumonia, lung cancer, and other diseases. Five experienced radiologists manually drew the margin of the lungs, slice by slice, on CT images. The dataset used to develop the network consisted of 157 cases for training, 20 cases for development, and 26 cases for internal validation. Two-dimensional (2D) U-Net and three-dimensional (3D) U-Net models were used for the task. The network was trained to segment the lung parenchyma as a whole and segment the right and left lung separately. The University Hospitals of Geneva ILD dataset, which contained high-resolution CT images of ILD, was used for external validation. @*Results@#The Dice similarity coefficients for internal validation were 99.6 ± 0.3% (2D U-Net whole lung model), 99.5 ± 0.3% (2D U-Net separate lung model), 99.4 ± 0.5% (3D U-Net whole lung model), and 99.4 ± 0.5% (3D U-Net separate lung model).The Dice similarity coefficients for the external validation dataset were 98.4 ± 1.0% (2D U-Net whole lung model) and 98.4 ± 1.0% (2D U-Net separate lung model). In 31 cases, where the extent of ILD was larger than 75% of the lung parenchymal area, the Dice similarity coefficients were 97.9 ± 1.3% (2D U-Net whole lung model) and 98.0 ± 1.2% (2D U-Net separate lung model). @*Conclusion@#The deep neural network achieved excellent performance in automatically delineating the boundaries of lung parenchyma with extensive pathological conditions on non-contrast chest CT images.
RESUMEN
Purpose@#The purpose of this study was to compare the efficacy of low-dose steroid, highdose steroid, and low-dose steroid combined with hyaluronidase with respect to intra-articular injection therapy for adhesive capsulitis (AC) of the shoulder. @*Methods@#Thirty patients with primary AC in the initial stage were randomly assigned into three groups to receive ultrasound-guided intra-articular injections with 20 mg of triamcinolone acetonide (group A, n=10), 40 mg of triamcinolone acetonide (group B, n=10) and 20 mg of triamcinolone acetonide combined with hyaluronidase (group C, n=10). The outcome measures included a visual analogue scale (VAS), the Shoulder Disability Questionnaire (SDQ), abduction and external rotation range of motion, and intra-sheath fluid (ISF) before treatment and at 2, 4, 8, and 16 weeks after treatment. @*Results@#Among the 30 patients, one participant in group B dropped out; therefore, a total of 29 patients completed this study and were successfully injected. After the injection, the VAS, SDQ, range of flexion and external rotation, and ISF improved in all groups compared with the preinjection status, regardless of treatment or time point. In the comparison between groups, the SDQ and ISF showed significantly greater improvements in groups B and C than in group A. @*Conclusion@#The therapeutic efficacy of combined low-dose corticosteroid and hyaluronidase is superior to that of low-dose corticosteroid and equivalent to that of high-dose corticosteroid in early AC.
RESUMEN
Background@#Allogeneic hematopoietic stem cell transplantation (alloSCT) is a potentially curative treatment option for acute leukemia. We aimed to identify the comorbidity factors affecting survival outcomes after alloSCT and develop a new comorbidity index tool for predicting overall survival (OS). @*Methods@#A Korean nationwide cohort of 3,809 adults with acute leukemia treated with alloSCT between January 2002 and December 2018 was analyzed as the development cohort.A retrospective cohort comprising 313 consecutive adults with acute leukemia who underwent alloSCT between January 2019 and April 2020 was analyzed as the validation cohort. @*Results@#In the development cohort, advanced age, male sex, and comorbidities such as previous non-hematologic malignancy, hypertension, and coronary or cerebral vascular disease were significantly related to poor OS. Subsequently, a new comorbidity scoring system was developed, and risk groups were created, which included the low-risk (score ≤0.17), intermediate-risk (0.17< score ≤0.4), high-risk (0.4< score ≤0.55), and very high-risk (score >0.55) groups. The 1-year OS rates were discriminatively estimated at 73.5%, 66.2%, 61.9%, and 50.9% in the low-risk, intermediate-risk, high-risk, and very high-risk groups in the development cohort, respectively (P <0.001). The developed scoring system yielded discriminatively different 1-year OS rates and 1-year incidence of non-relapse mortality according to the risk group (P =0.085 and P =0.018, respectively).Furthermore, the developed model showed an acceptable performance for predicting 1-year non-relapse mortality with an area under the curve of 0.715. @*Conclusion@#The newly developed predictive scoring system could be a simple and reliable tool helping clinicians to assess risk of alloSCT in adults with acute leukemia.
RESUMEN
Background@#Allogeneic hematopoietic stem cell transplantation (alloSCT) is a potentially curative treatment option for acute leukemia. We aimed to identify the comorbidity factors affecting survival outcomes after alloSCT and develop a new comorbidity index tool for predicting overall survival (OS). @*Methods@#A Korean nationwide cohort of 3,809 adults with acute leukemia treated with alloSCT between January 2002 and December 2018 was analyzed as the development cohort.A retrospective cohort comprising 313 consecutive adults with acute leukemia who underwent alloSCT between January 2019 and April 2020 was analyzed as the validation cohort. @*Results@#In the development cohort, advanced age, male sex, and comorbidities such as previous non-hematologic malignancy, hypertension, and coronary or cerebral vascular disease were significantly related to poor OS. Subsequently, a new comorbidity scoring system was developed, and risk groups were created, which included the low-risk (score ≤0.17), intermediate-risk (0.17< score ≤0.4), high-risk (0.4< score ≤0.55), and very high-risk (score >0.55) groups. The 1-year OS rates were discriminatively estimated at 73.5%, 66.2%, 61.9%, and 50.9% in the low-risk, intermediate-risk, high-risk, and very high-risk groups in the development cohort, respectively (P <0.001). The developed scoring system yielded discriminatively different 1-year OS rates and 1-year incidence of non-relapse mortality according to the risk group (P =0.085 and P =0.018, respectively).Furthermore, the developed model showed an acceptable performance for predicting 1-year non-relapse mortality with an area under the curve of 0.715. @*Conclusion@#The newly developed predictive scoring system could be a simple and reliable tool helping clinicians to assess risk of alloSCT in adults with acute leukemia.
RESUMEN
Percutaneous transthoracic needle biopsy (PTNB) is one of the essential diagnostic procedures for pulmonary lesions. Its role is increasing in the era of CT screening for lung cancer and precision medicine. The Korean Society of Thoracic Radiology developed the first evidence-based clinical guideline for PTNB in Korea by adapting pre-existing guidelines. The guideline provides 39 recommendations for the following four main domains of 12 key questions: the indications for PTNB, pre-procedural evaluation, procedural technique of PTNB and its accuracy, and management of post-biopsy complications. We hope that these recommendations can improve the diagnostic accuracy and safety of PTNB in clinical practice and promote standardization of the procedure nationwide.
RESUMEN
PURPOSE@#The bond strengths between resin denture teeth with various compositions and denture base resins including conventional and CAD/CAM purposed materials were evaluated to find influence of each material. @*MATERIALS AND METHODS@#Cylindrical rods (6.0 mm diameter × 8.0 mm length) prepared from pre-polymerized CAD/CAM denture base resin blocks (PMMA Block-pink; Huge Dental Material, Vipi Block-Pink; Vipi Industria) were bonded to the basal surface of resin teeth from three different companies (VITA MFT® ; VITA Zahnfabrik, Endura Posterio® ; SHOFU Dental, Duracross Physio® ; Nissin Dental Products Inc.) using resin cement (Super-Bond C&B; SUN MEDICAL). As a control group, rods from a conventional heat-polymerizing denture base resin (Vertex™ Rapid Simplified; Vertex-Dental B.V. Co.) were attached to the resin teeth using the conventional flasking and curing method. Furthermore, the effect of air abrasion was studied with the highly cross-linked resin teeth (VITA MFT® ) groups. The shear bond strengths were measured, and then the fractured surfaces were examined to analyze the mode of failure. @*RESULTS@#The shear bond strengths of the conventional heat-polymerizing PMMA denture resin group and the CAD/CAM denture base resin groups were similar. Air abrasion to VITA MFT® did not improve shear bond strengths. Interfacial failure was the dominant cause of failure for all specimens. @*CONCLUSION@#Shear bond strengths of CAD/CAM denture base materials and resin denture teeth using resin cement are comparable to those of conventional methods.
RESUMEN
Objective@#To investigate the articles in the Annals of Rehabilitation Medicine (ARM) using a bibliometric analysis to verify whether there is a correlation between the topics of interest for expert groups and the public media. @*Methods@#A total of 1,088 ARM articles from the third issue of 2011 to the third issue of 2019 were analyzed. We conducted a bibliometric analysis of the articles using conventional metrics (CM) and alternative metrics (AM). The CM was investigated by collating the type of publication, number of citations, and the specific field of rehabilitation medicine for each article. The AM was analyzed using the Altmetric Attention Score (AAS) provided by Altmetric, the leading AM company. The correlation between the number of citations and the AAS was tested using the Spearman rank correlation coefficient. @*Results@#The combined ratio of original articles and case reports was over 90% in this study; however, the total distribution was significantly different compared to previous bibliometric studies (p<0.05). There were 233 articles that satisfied both conditions of at least one citation and at least one AAS point. The number of citations and the AAS were found to have a statistically significant positive linear correlation on a scatter plot (r=0.216, p=0.001). @*Conclusion@#There is a significant correlation between AM and CM, which means itis important to increase the dissemination of academic knowledge through the public media and increase the status of the journal by increasing the citation-related index.
RESUMEN
Background@#General anesthesia (GA) has been considered the anesthetic technique which most frequent leads to phantom limb pain (PLP) after a limb amputation. However, these prior reports were limited by small sample sizes. The aims of this study were to evaluate the incidence of PLP according to the various anesthetic techniques used for limb amputation and also to compare the occurrence of PLP according to amputation etiology using the Korean Health Insurance Review and Assessment Service for large-scale demographic information. @*Methods@#The claims of patients who underwent limb amputation were reviewed by analyzing the codes used to classify standardized medical behaviors. The patients were categorized into three groups—GA, neuraxial anesthesia (NA), and peripheral nerve block (PNB)—in accordance with the anesthetic technique. The recorded diagnosis was confirmed using the diagnostic codes for PLP registered within one year after the limb amputation. @*Results@#Finally, 7,613 individuals were analyzed. According to the recorded diagnoses, 362 patients (4.8%) developed PLP after amputation. Among the 2,992 patients exposed to GA, 191 (6.4%) were diagnosed with PLP, whereas 121 (4.3%) of the 2,840 patients anesthetized with NA, and 50 (2.8%) of the 1,781 patients anesthetized under PNB developed PLP. The relative risks were 0.67 (95% confidence interval [CI], 0.53–0.84; P < 0.001) for NA and 0.43 (95% CI, 0.32–0.59; P < 0.001) for PNB. @*Conclusions@#In this retrospective cohort study, using large-scale population-based databases, the incidence rates of PLP after limb amputations were, in the order of frequency, GA, NA, and PNB.
RESUMEN
BACKGROUND: It is not possible to measure how much activity is required to understand and code a medical data. We introduce an assessment method in clinical coding, and applied this method to neurosurgical terms.METHODS: Coding activity consists of two stages. At first, the coders need to understand a presented medical term (informational activity). The second coding stage is about a navigating terminology browser to find a code that matches the concept (code-matching activity). Systematized Nomenclature of Medicine – Clinical Terms (SNOMED CT) was used for the coding system. A new computer application to record the trajectory of the computer mouse and record the usage time was programmed. Using this application, we measured the time that was spent. A senior neurosurgeon who has studied SNOMED CT has analyzed the accuracy of the input coding. This method was tested by five neurosurgical residents (NSRs) and five medical record administrators (MRAs), and 20 neurosurgical terms were used.RESULTS: The mean accuracy of the NSR group was 89.33%, and the mean accuracy of the MRA group was 80% (p=0.024). The mean duration for total coding of the NSR group was 158.47 seconds, and the mean duration for total coding of the MRA group was 271.75 seconds (p=0.003).CONCLUSION: We proposed a method to analyze the clinical coding process. Through this method, it was possible to accurately calculate the time required for the coding. In neurosurgical terms, NSRs had shorter time to complete the coding and higher accuracy than MRAs.