The fracture strength of endocrowns manufactured from different hybrid blocks under axial and lateral forces.

AIM: This in vitro study was conducted to compare the fracture strength of endocrowns manufactured from different hybrid blocks under axial and lateral forces. MATERIAL AND METHODS: Following root-canal treatment, 100 permanent mandibular first molars were randomly distributed among 5 groups according to restoration material. Endocrown restorations were produced from IPS e.max CAD (IPS), Vita Enamic (VE), GC Cerasmart (GC), Shofu (SH), and Brilliant Crios (BC) using CAD/CAM technology. Specimens were cemented, subjected to artificial aging, and further divided into 2 subgroups (n = 10) per group for fracture testing. Each specimen was placed on a universal testing machine and subjected to axial or lateral forces applied at a crosshead speed of 1 mm/min. Fracture data were analyzed using one-way ANOVA, Tukey, Tamhane T2, and Weibull tests. RESULTS: Statistically significant differences in fracture-strength (FS) values under axial and lateral forces were observed among the groups (P < 0.05). Group BC had the highest FS value under axial forces, whereas group IPS had the highest FS value under lateral forces. According to Weibull analysis, VE exhibited the highest reliability under axial forces (7.62), whereas IPS exhibited the highest reliability under lateral forces (4.68). No statistically significant differences were detected in the distribution of failure types under either axial or lateral forces among the groups (P > 0.05). CONCLUSION: All of the hybrid blocks tested showed sufficient fracture strength for use as CAD/CAM-fabricated endocrowns. CLINICAL RELEVANCE: Hybrid blocks can be used as an alternative to lithium disilicate blocks in endocrown restorations.

Comparative genomic analysis of expansin superfamily gene members in zucchini and cucumber and their expression profiles under different abiotic stresses.

Zucchini and cucumber belong to the Cucurbitaceae family, a group of economical and nutritious food plants that is consumed worldwide. Expansin superfamily proteins are generally localized in the cell wall of plants and are known to possess an effect on cell wall modification by causing the expansion of this region. Although the whole genome sequences of cucumber and zucchini plants have been resolved, the determination and characterization of expansin superfamily members in these plants using whole genomic data have not been implemented yet. In the current study, a genome-wide analysis of zucchini (Cucurbita pepo) and cucumber (Cucumis sativus) genomes was performed to determine the expansin superfamily genes. In total, 49 and 41 expansin genes were identified in zucchini and cucumber genomes, respectively. All expansin superfamily members were subjected to further bioinformatics analysis including gene and protein structure, ontology of the proteins, phylogenetic relations and conserved motifs, orthologous relations with other plants, targeting miRNAs of those genes and in silico gene expression profiles. In addition, various abiotic stress responses of zucchini and cucumber expansin genes were examined to determine their roles in stress tolerance. CsEXPB-04 and CsEXPA-11 from cucumber and CpEXPA-20 and CpEXPLA-14 from zucchini can be candidate genes for abiotic stress response and tolerance in addition to their roles in the normal developmental processes, which are supported by the gene expression analysis. This work can provide new perspectives for the roles of expansin superfamily genes and offers comprehensive knowledge for future studies investigating the modes of action of expansin proteins. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s12298-021-01108-w.

Clinical evaluation of a low-shrinkage resin composite in endodontically treated premolars: 3-year follow-up.

OBJECTIVES: This study compared the 3-year clinical performance of a low-shrinkage silorane-based composite material with that of a methacrylate-based composite material in the restoration of endodontically treated premolar teeth. MATERIALS AND METHODS: A total of 70 patients requiring a Class II composite-resin restoration of a premolar tooth following root-canal treatment participated in the study. Cavities were restored with either a silorane-based restorative (Filtek Silorane + Silorane System Adhesive) or a methacrylate-based restorative (Filtek Z250 + Clearfil SE Bond) system applied according to the manufacturer's instructions. Restorations were evaluated by two blinded observers at five different time intervals (baseline; 6 months; 1, 2, and 3 years) according to modified USPHS criteria. Pearson's chi-square tests were used to examine differences in the clinical performance of the materials (retention, color match, marginal discoloration, secondary caries, anatomical form, marginal adaptation, and surface roughness), and Friedman and Wilcoxon tests were used to compare changes between baseline and each recall time, with a level of 0.05 considered statistically significant. RESULTS: After 3 years, no statistically significant differences in clinical performance were observed between the two materials (p > 0.05). Intra-system comparisons revealed a statistically significant deterioration in color match, marginal discoloration, anatomical form, marginal adaptation, and surface roughness scores after 3 years for both systems. Although the difference was not significant at 3 years of follow-up, the level of deterioration in marginal adaptation and surface roughness was greater for the Filtek Silorane restoration than for the Filtek Z250 restoration at the 1 year follow-up (p > 0.05). CONCLUSION: Restorations of both materials were clinically acceptable after 3 years. The Filtek Silorane system did not appear to offer any clinical advantages over the methacrylate-based system when used in the restoration of Class II cavities in endodontically treated premolars. CLINICAL RELEVANCE: The restoration of endodontically treated premolars with minor or moderate loss of tooth structure can be directly performed either with silorane or methacrylate-based composite resins.

Evaluation of goat milk as storage media to preserve viability of human periodontal ligament cells in vitro.

BACKGROUND AND AIM: The purpose of this study was to evaluate the effectiveness of goat milk as a storage media for maintenance of periodontal ligament (PDL) cell viability of avulsed teeth and compare it with commonly used and/or investigated storage media. MATERIALS AND METHODS: PDL cells were obtained from the root surface of healthy premolars and were cultured in Eagle's maintenance medium (EMM). Cell cultures were treated with the following storage media: tap water (negative control); EMM (positive control); Hank's balanced salt solution; ultra high temperature (UHT) long-shelf-life lactose-free cow milk; UHT long-shelf-life whole cow milk; UHT long-shelf-life skimmed cow milk; UHT long-shelf-life soy milk; UHT long-shelf-life goat milk, UHT long-shelf-life follow on milk with probiotic, 20% propolis, and egg white. Culture plates were incubated with experimental media at 20°C for 1, 3, 6, 12, and 24 h. PDL cell viability was assessed by tetrazolium salt-based colorimetric (MTT) assay at each test period. One-way anova was used to evaluate the effects of storage solutions at each time point, followed by post hoc Duncan's multiple comparison test (P = 0.05). A dendrogram was constructed to show the arrangement of hierarchical clustering. RESULTS: Goat milk displayed the highest capacity to maintain cell viability at all test intervals (P < 0.001). Between 3 and 24 h, milk with the probiotic showed the lowest time-dependent PDL cell viability among all test media (P < 0.001). Compared with all milks, HBSS performed significantly less effectively in maintaining PDL cell viability during the entire test period (P < 0.001). CONCLUSION: Based on PDL viability, goat milk can be recommended as a suitable storage medium for avulsed teeth.

Antibacterial effect of N-acetylcysteine and taurolidine on planktonic and biofilm forms of Enterococcus faecalis.

AIM: This study investigated the antimicrobial activity of taurolidine and N-acetylcysteine (NAC) on planktonic and biofilm Enterococcus faecalis phenotypes. MATERIALS AND METHODS: The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of NAC and taurolidine were determined using broth microdilution, utilizing calcium hydroxide (CH), sodium hypochlorite, and chlorhexidine for comparisons. Thereafter, the ability of dentin powder to neutralize the antibacterial activity of NAC and taurolidine was studied. The efficacy of both antimicrobial agents on E. faecalis biofilms was examined quantitatively by exposure of 21-day-old E. faecalis biofilms on dentin disks. The cytotoxicity of human dental pulp fibroblast cells in contact with the extracts was evaluated by 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyltetrazolium bromide (MTT) assay. RESULTS: The MIC and MBC of NAC, taurolidine, and CH were not affected by pre-incubation in dentin powder. As verified by qualitative assay of E. faecalis biofilms, CH was the strongest bactericidal agent at all test dilutions, regardless of the presence of dentin powder. The antibacterial effect of NAC and taurolidine was significantly lower than that of CH at all test dilutions. At 48 h, all test agents showed similar, but high levels of cytotoxicity. CONCLUSION: NAC and taurolidine were effective against E. faecalis in planktonic state, at the expense of demonstrating cytotoxic effects. For both planktonic and biofilm forms of E. faecalis, neither NAC nor taurolidine offered any advantage over CH.

The Effects of Smoking on the Osmotic Pressure of Human Dental Pulp Tissue.

OBJECTIVE: We aimed to investigate the effect of smoking on the osmotic pressure (OP) of human dental pulp tissue. MATERIALS AND METHODS: Sixty male dental patients (smokers and nonsmokers) scheduled for root canal treatment for prosthodontics were included in the study. Fifteen patients (1 premolar tooth/patient) were allocated to each of the following groups according to their smoking habits, i.e. group 1: ≤10 cigarettes/day, group 2: 11-20 cigarettes/day, group 3: >20 cigarettes/day and group 4: nonsmoking controls. Apical pulp tissues were removed via coronal access. Pulp tissue supernatants were obtained to measure the pulpal OP by means of a semimicro digital osmometer. One-way analysis of variance and the post hoc Duncan test were used to analyze the differences in OP between groups. Regression analysis was used to determine the relationship between the number of cigarettes smoked daily and the pulpal OP. RESULTS: The mean (± SD) OP value decreased as cigarette consumption increased: group 4 (268.00 ± 10.09 mosm/kg) > group 1 (259.20 ± 7.16 mosm/kg) > group 2 (248.90 ± 2.23 mosm/kg) > group 3 (239.90 ± 7.40 mosm/kg). The OP differed significantly between groups (p < 0.01), and a significant negative correlation was found between cigarette consumption and pulpal OP (r = -0.809, p < 0.01). CONCLUSION: In this study, the OP decreased as the number of cigarettes smoked increased. In clinical examination, there may be misdiagnosis of pulpal conditions in smokers (even in healthy pulp tissue) due to the effect of altered OP on pulpal tissue reactions.

A comparative scanning electron microscopy evaluation of smear layer removal from teeth with different irrigation solutions and lasers.

The aim of this study was to evaluate the efficacy of smear layer removal from teeth following root canals using lasers (Er:YAG and Nd:YAG), NaOCl, 17% EDTA, and MTAD by scanning electron microscopy (SEM). Root canals were irrigated with 3 mL of 5.25% NaOCl after each file. Teeth were randomly divided into five groups. In the final irrigation, canals were irrigated with 5.25% NaOCl (Group 1, control), 17% EDTA (Group 2), or BioPure MTAD (Group 3). Laser groups were irradiated with Er:YAG laser (1.8 W, 120 mJ, 15 Hz) (Group 4) or Nd:YAG laser (1 W, 100 mJ, 15 Hz) (Group 5). The smear layer at the apical, middle, and coronal thirds of each root canal was imaged using SEM. Smear layer removal by EDTA was the most effective in all regions. The difference between EDTA and MTAD was statistically significant in the coronal and middle (p < 0.05), but not the apical (p > 0.05), regions. The difference between the control and laser groups was not statistically significant (p > 0.05). In all regions, the difference between 17% EDTA-MTAD and the control-laser groups was statistically significant (p < 0.05). Although improvement was observed in removal of the smear layer using alternative materials and techniques, application of a combination of EDTA and NaOCl remains an effective technique.

The effects of different cavity disinfectants on fracture resistance of tooth fragment reattachments.

Purpose: This study was conducted to investigate the fracture strength of reattached tooth fragments after different cavity disinfection protocols. Materials and methods: Incisal edges of 144 bovine incisors were sectioned and then randomly divided into 4 different groups as follows: Group C: no disinfectant; Group NaOCl: 2.5% sodium hypochlorite solution; Group NaOCl+Asc: 2.5% sodium hypochlorite followed by 10% ascorbic acid solution; Group CHX: 2% chlorhexidine solution. Teeth were further divided into 3 subgroups according to universal adhesive (G-Premio Bond, Scotchbond Universal, Prime and Bond Universal). Fracture resistance was evaluated using a universal testing machine. Data was analyzed using 2-way ANOVA with Bonferroni tests. Results: Cavity disinfectant had a statistically significant effect on bond strength (p<0.05), with the highest bond strength detected in the NaOCl+Asc Group (148.22 ± 51.64) and the lowest in the NaOCl Group (112.84 ± 43.12). Scotchbond Universal exhibited the highest bond strength values (163.59 ± 49.94); however, there were no significant differences between the other adhesive systems (p> 0.05). Conclusion: Application of ascorbic acid following sodium hypochlorite treatment can improve dentin bond strength.

Efficacy of Endoscope and Periapical Radiography to Detect Residual Root Canal Filling Using Micro-CT as Reference.

INTRODUCTION: To evaluate the efficacy of examinations by endoscope of root canals to determine residual root canal filling materials by comparison with microcomputed tomographic (micro-CT) images as reference. METHODS: Thirty maxillary second premolars with oval canals received root canal treatment. Then D-Race retreatment files were used to remove the root canal fillings supplemented by XP-endo Finisher. Samples were scanned to reconstruct micro-CT reference images. Images were obtained of all samples from the mesiodistal and buccolingual directions by digital radiography. Then the root canals of specimens mounted in manikins were assessed by endoscope. The radiographic and endoscopic results were scored following comparison with the micro-CT images, which served as a reference, by 2 blinded observers. The interexaminer reliability of the assessments was evaluated by kappa test and the accuracy of endoscopic visualization according to the presence of residual root canal filling materials was compared using Kruskal-Wallis H test and Spearman's rank order correlation with the level of significance set at 5%. RESULTS: The efficiency of the periapical radiography and endoscopy to determine residual root canal filling material was similar in every third of the root canal (P > .05). CONCLUSIONS: The endoscope detected residual root canal filling material as efficiently as periapical radiography.

The effect of different power outputs of carbon dioxide laser on bonding between zirconia ceramic surface and resin cement.

OBJECTIVE: The purpose of this in vitro study was to evaluate the influence of different power outputs of a carbon dioxide (CO2) laser on shear bond strength of resin cement to zirconium dioxide-based ceramic. MATERIALS AND METHODS: Fifty zirconium dioxide core specimens (10 mm diameter and 2 mm thickness) were produced and they were embedded in the centers of auto-polymerizing acrylic resin blocks. Ten specimens served as control and no surface treatment was applied. Subsequently specimens were randomly divided into four groups, each containing 10 specimens for surface treatment with CO2 laser with different output power; laser treated with 2 W (Group 2 W), 3 W (Group 3 W), 4 W (Group 4 W) and finally 5 W (Group 5 W). Fifty composite resin discs were fabricated and cemented with adhesive resin cement to the specimen surfaces. A universal test machine was used for shear bond strength test at a crosshead speed 1 mm/min. Data were statistically analyzed by one-way analyses of variance (ANOVA) with Post-Hoc Tukey tests (α = 0.05). RESULTS: It was found that the shear bond strength values were affected by power outputs of laser (p < 0.05). Highest shear bond strength values were obtained with group 2 W (21.0 ± 2.7). Lowest values were obtained with group 5 W (14.4 ± 1.6). CONCLUSION: The current study revealed that there was a relationship between laser output power and shear bond strength for zirconium dioxide ceramics. However, output power of the laser and the energy level is a critical factor on micromechanical retention.

Metallurgical characterisation and torsional resistance of blue thermomechanically treated nickel titanium instruments after simulated ex vivo retreatment procedure.

To compare used and unused Reciproc Blue and Reciproc after retreatment, the instruments were used in the mesiobuccal canals of maxillary molars with curvature. The torsional resistances were tested and then unused instruments were subjected to XRD, DSC and microhardness tests. Student's t, ANOVA and Tukey's tests were performed (α-level 0.05). The torsional strength of used Reciproc Blue was not significantly different than unused ones (P > .05), while torsional strength of Reciproc decreased significantly (P < .05). DSC and XRD indicated that Reciproc Blue exhibited prominent transformation peaks corresponding austenite to R-phase. Microhardness of Reciproc was significantly higher (P < .05). A second reuse of Reciproc Blue for retreatment could be considered safe in terms of torsional strength. Blue treatment also decreased surface microhardness of the instrument and changed phase composition by increasing the R-phase.

Cyclic Fatigue Resistance of XP-Endo Shaper, K3XF, and ProTaper Gold Nickel-titanium Instruments.

INTRODUCTION: The aim of this study was to compare the cyclic fatigue resistance of the ProTaper Gold (PTG; Dentsply Maillefer, Ballaigues, Switzerland), K3XF (SybronEndo, Orange, CA), and XP-endo Shaper (FKG Dentaire, La Chaux-de-Fond, Switzerland) nickel-titanium rotary instruments at intracanal temperatures. METHODS: Eighteen XP-endo Shaper (30.01), 18 K3XF (30.04), and 18 PTG F3 (30.09v) instruments were used to test the cyclic fatigue resistance at an intracanal temperature of 35° ± 2°C. The instruments were tested in a metal block that simulated a canal curvature angle of 60° and a curvature or radius of 5 mm. All instruments were operated until fracture occurred, and then the number of cycles to failure was calculated. The lengths of fractured fragments were measured with a digital caliper. The data were analyzed statistically using 1-way analysis of variance and the Tukey post hoc test with significance set at P < .05. RESULTS: The XP-endo Shaper instruments showed a significantly higher number of cycles to fracture than the K3XF and PTG instruments (P < .05). There was no difference between the PTG and K3XF instruments (P > .05). CONCLUSIONS: The XP-endo Shaper instruments exhibited greater cyclic fatigue resistance compared with the other instruments at the intracanal temperature.

Scanning electron microscopy with energy dispersive X-ray spectrophotometry analysis of reciprocating and continuous rotary nickel-titanium instruments following root canal retreatment.

This study aimed to evaluate superficial defects and the composition of Reciproc R25 and ProTaper Retreatment file systems (Dentsply Maillefer, Ballaigues, Switzerland) used for retreatment. A total of 100 maxillary incisor teeth were randomly divided into the following two groups: Reciproc R25 (n = 25) and ProTaper Retreatment instrument (n = 75) groups. The nickel-titanium (Ni-Ti) compositions of the files before and after use were analyzed using energy dispersive X-ray spectrophotometry (EDX). Chi-square, Mann-Whitney U, and Kruskal-Wallis tests were used to analyze the data. ProTaper Retreatment instrument group showed a significantly higher number of defects than the Reciproc group (P < 0.05). No instrument fracture was detected. The presence of debris was observed in both groups before use, although the level was significantly higher in the ProTaper Retreatment group, which consisted of metals (P < 0.05). There was no significant difference between new and used instruments with regard to Ni-Ti composition (P < 0.05). EDX analysis showed that both the Reciproc and ProTaper Retreatment instruments had a Ni-Ti composition that was within the standards specified by the American Society of Testing and Materials. This study confirmed the use of both the Reciproc R25 file and ProTaper Retreatment file system for root canal filling removal in straight root canals as a safe procedure. (J Oral Sci 58, 401-406, 2016).

Effect of propolis as a root canal irrigant on bond strength to dentin.

PURPOSE: The purpose of this in vitro study was to evaluate the effect of propolis on bond strength to dentin of a self-etch adhesive when used as a final irrigant. METHODS: 126 human third molars were sectioned 3 mm below the occlusal level and then randomly divided into 7 groups (n = 18). The exposed dentin surfaces were treated with irrigation solutions as follows: Group 1: 5.25% NaOCl; Group 2: 5.25% NaOCl followed by 17% EDTA; Group 3: 5.25% NaOCl followed by Tubulicid Plus (Temrex, Freeport, NY, USA); Group 4: 5.25% NaOCl followed by MTAD; Group 5: 5.25% NaOCl followed by 20% propolis; Group 6: 5.25% NaOCl followed by 2% CHX; Group 7: distilled water (control). Irrigated specimens were bonded using Clearfil SE Bond (Kuraray, Osaka, Japan) with Tygon (Saint-Gobain, Saint-Gobain Performance Plastics, France), tubes for microshear bond strength testing. Data was analyzed using a one-way ANOVA and Tukey test. RESULTS: Among the tested groups, although the lowest bond strength values were detected in Group 1 (11.25 ± 1.97), a significant statistical difference was detected only between this group and Group 4 (18.70 ± 1.82) and Group 5 (16.75 ± 3.70) (p = 0.0012). CONCLUSIONS: 20% propolis solution as a final irrigant was found to have a favorable effect on the dentin bond strength of the tested self-etch adhesive to coronal dentin when compared with other irrigation solutions.

Effect of 1-piece post and core fabrication techniques on fracture strength.

PURPOSE: The purpose of this in vitro study was to evaluate and compare the fracture strengths of post and core systems produced with different fabrication techniques and materials. METHODS: Forty extracted human single-root premolars were used in this study. After root canal treatment, the teeth were randomly divided into 4 groups of 10 each as follows: group C: metallic 1-piece posts and cores fabricated by casting, and serving as the control; group CM: metallic posts and cores fabricated with the copy milled technique; group LS: 1-piece posts and cores fabricated with the laser sintering technique; and group ZR: 1-piece zirconia posts and cores fabricated with computer-aided design and computer-aided manufacturing (CAD-CAM). The posts and cores were cemented to the teeth with adhesive resin cement; then, the specimens were mounted to acrylic resin blocks, attached to an Instron Universal Testing Machine, and loaded with a crosshead speed of 1 mm/min, until fracture. Data were statistically analyzed using 1-way analysis of variance (ANOVA), followed by the post hoc Tukey test (α = 0.05). RESULTS: The highest fracture results were found in group ZR (315.4 ± 53.4 N), which showed significant differences from all other groups (p<0.05). The lowest test values were found in group C (230.2 ± 29.8 N). Group LS (250.9 ± 29.0 N), group CM (253.0 ± 22.4 N) and group C did not show any significant differences (p>0.05). CONCLUSIONS: Custom-made zirconia 1-piece posts and cores, fabricated using the CAD-CAM procedure, can be an alternative treatment method when compared with other techniques.

Effect of immediate and delayed post space preparation on the apical seal of root canals obturated with different sealers and techniques.

UNLABELLED: During mechanical preparation of the post space, the root canal filling may be twisted or vibrated, depending on several factors associated with the preparation technique and quality of filling. OBJECTIVE: The purpose of this study was to investigate the effect of immediate and delayed post space preparation on the integrity of the apical seal. MATERIAL AND METHODS: Sixty-four extracted human incisors were biomechanically prepared using the step-back technique. Sixty roots were randomly assigned to 6 experimental groups of 10 teeth each and the remaining 4 roots served as positive and negative controls (n=2). The root canals in the different groups were obturated with cold lateral and warm vertical condensation of gutta-percha and one of two sealers (Sealapex and Diaket). Post space was prepared either individually or simultaneously. An insulated copper wire was cut into 10-cm-long pieces. In each canal, one piece was inserted to maintain contact with gutta-percha and extended to the outside as one of two working electrodes. A stainless steel wire with the same dimensions of those of the copper wire, used as the other working electrode, was immersed into the background electrolyte from the center of the bottle. The electrical current between standard and experimental electrodes in canals was measured over a period of 10 days applying a conductivity meter. The Kruskal-Wallis test (p=0.05) determined whether there was a significant difference in microleakage among the groups and the Mann-Whitney U test (p=0.01) was used for multiple comparison grouping variables. RESULTS: The results suggest that only the differences between the root canal filling techniques were statistically significant (p<0.01). There were no statistically significant difference in the sealers and the times of filling removal for post space preparation (p>0.01). CONCLUSION: The quality of the root canal filling is important for the integrity of the apical seal.

Effect of immediate and delayed post space preparation on the apical seal of root canals obturated with different sealers and techniques

During mechanical preparation of the post space, the root canal filling may be twisted or vibrated, depending on several factors associated with the preparation technique and quality of filling. OBJECTIVE: The purpose of this study was to investigate the effect of immediate and delayed post space preparation on the integrity of the apical seal. MATERIAL AND METHODS: Sixty-four extracted human incisors were biomechanically prepared using the step-back technique. Sixty roots were randomly assigned to 6 experimental groups of 10 teeth each and the remaining 4 roots served as positive and negative controls (n=2). The root canals in the different groups were obturated with cold lateral and warm vertical condensation of gutta-percha and one of two sealers (Sealapex and Diaket). Post space was prepared either individually or simultaneously. An insulated copper wire was cut into 10-cm-long pieces. In each canal, one piece was inserted to maintain contact with gutta-percha and extended to the outside as one of two working electrodes. A stainless steel wire with the same dimensions of those of the copper wire, used as the other working electrode, was immersed into the background electrolyte from the center of the bottle. The electrical current between standard and experimental electrodes in canals was measured over a period of 10 days applying a conductivity meter. The Kruskal-Wallis test (p=0.05) determined whether there was a significant difference in microleakage among the groups and the Mann-Whitney U test (p=0.01) was used for multiple comparison grouping variables. RESULTS: The results suggest that only the differences between the root canal filling techniques were statistically significant (p<0.01). There were no statistically significant difference in the sealers and the times of filling removal for post space preparation (p>0.01). CONCLUSION: The quality of the root canal filling is important for the integrity of the apical seal.