Green Synthesis of Copper Oxide Nanoparticles from the Leaves of Aegle marmelos and Their Antimicrobial Activity and Photocatalytic Activities.

The leaves of the Aegle marmelos plant were used for the green synthesis of copper oxide nanoparticles and further characterized by different techniques, including (Ultra Violet-Visible) UV-Vis, Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX), Transmission electron microscopy (TEM) and X-ray diffraction (XRD). The UV-Vis showed a peak at 330 nm, which may be due to the Surface Plasmon Resonance phenomenon. XRD analysis showed the crystalline nature of copper oxide nanoparticles (CuO NPs). In contrast, SEM showed that nanoparticles were not aggregated or clumped, EDX showed the presence of elemental copper., and further, the TEM analysis revealed the average particle size of copper oxide nanoparticles to be 32 nm. The Minimum Inhibitory Concentration (MIC) for Escherichia coli (E. coli) and Staphylococcusaureus (S. aureus) was found to be 400 µg/mL, whereas for Candida albicans (C. albicans) and Candida dubliniensis (C. dubliniensis) it was 800 µg/mL. The zone of inhibition in the well diffusion assay showed the antimicrobial activity of copper oxide nanoparticles, and it also showed that as the concentration of copper oxide nanoparticles increased, the zone of inhibition also increased. Further, the electron microscopic view of the interaction between copper oxide nanoparticles and C. albicans cells showed that CuO NPs were internalized and attached to the cell membrane, which caused changes in the cellular structure and caused deformities which eventually led to cell death. The prepared CuO NPs showed significant photocatalytic degradation of organic dyes in the presence of sunlight.

Optimization of Photovoltaic Performance of Pb-Free Perovskite Solar Cells via Numerical Simulation.

Recently, the simulation of perovskite solar cells (PSCs) via SCAPS-1D has been widely reported. In this study, we adopted SCAPS-1D as a simulation tool for the numerical simulation of lead-free (Pb-free) PSCs. We used methyl ammonium germanium iodide (MAGeI3) as a light absorber, zinc oxysulphide (ZnOS) as an electron transport layer (ETL), and spiro-OMeTAD as a hole transport layer. Further, the thickness of the ZnOS, MAGeI3, and spiro-OMeTAD layers was optimized. The optimal thicknesses of the ZnOS, MAGeI3, and spiro-OMeTAD layers were found to be 100 nm, 550 nm, and 100 nm, respectively. The optimized MAGeI3-based PSCs exhibited excellent power conversion efficiency (PCE) of 21.62%, fill factor (FF) of 84.05%, and Jsc of 14.51 mA/cm2. A fantastic open circuit voltage of 1.77 V was also obtained using SCAPS-1D. We believe that these theoretically optimized parameters and conditions may help improve the experimental efficiency of MAGeI3-based PSCs in the future.

Electrocatalytic Behavior of an Amide Functionalized Mn(II) Coordination Polymer on ORR, OER and HER.

The new 3D coordination polymer (CP) [Mn(L)(HCOO)]n (Mn-CP) [L = 4-(pyridin-4-ylcarbamoyl)benzoate] was synthesised via a hydrothermal reaction using the pyridyl amide functionalized benzoic acid HL. It was characterized by elemental, FT-IR spectroscopy, single-crystal and powder X-ray diffraction (PXRD) analyses. Its structural features were disclosed by single-crystal X-ray diffraction analysis, which revealed a 3D structure with the monoclinic space group P21/c. Its performance as an electrocatalyst for oxygen reduction (ORR), oxygen evolution (OER), and hydrogen evolution (HER) reactions was tested in both acidic (0.5 M H2SO4) and alkaline (0.1 M KOH) media. A distinct reduction peak was observed at 0.53 V vs. RHE in 0.1 M KOH, which corresponds to the oxygen reduction, thus clearly demonstrating the material's activity for the ORR. Tafel analysis revealed a Tafel slope of 101 mV dec-1 with mixed kinetics of 2e- and 4e- pathways indicated by the Koutecky-Levich analysis. Conversely, the ORR peak was not present in 0.5 M H2SO4 indicating no activity of Mn-CP for this reaction in acidic media. In addition, Mn-CP demonstrated a noteworthy activity toward OER and HER in acidic media, in contrast to what was observed in 0.1 M KOH.

Bioactive Tryptophan-Based Copper Complex with Auxiliary ß-Carboline Spectacle Potential on Human Breast Cancer Cells: In Vitro and In Vivo Studies.

Biocompatible tryptophan-derived copper (1) and zinc (2) complexes with norharmane (ß-carboline) were designed, synthesized, characterized, and evaluated for the potential anticancer activity in vitro and in vivo. The in vitro cytotoxicity of both complexes 1 and 2 were assessed against two cancerous cells: (human breast cancer) MCF7 and (liver hepatocellular cancer) HepG2 cells with a non-tumorigenic: (human embryonic kidney) HEK293 cells. The results exhibited a potentially decent selectivity of 1 against MCF7 cells with an IC50 value of 7.8 ± 0.4 µM compared to 2 (less active, IC50 ~ 20 µM). Furthermore, we analyzed the level of glutathione, lipid peroxidation, and visualized ROS generation to get an insight into the mechanistic pathway and witnessed oxidative stress. These in vitro results were ascertained by in vivo experiments, which also supported the free radical-mediated oxidative stress. The comet assay confirmed the oxidative stress that leads to DNA damage. The histopathology of the liver also ascertained the low toxicity of 1.

Green synthesis of silver nanoparticles using Carum copticum: Assessment of its quorum sensing and biofilm inhibitory potential against gram negative bacterial pathogens.

Antimicrobial resistance among pathogenic bacteria has become a global threat to human health. Due to poor progress in development of new antimicrobial drugs, there is a need for the development of novel alternative strategies to combat the problem of multidrug resistance. Moreover, there is focus on ecofriendly approach for the synthesis nanoparticles having efficient medicinal properties including antivirulence properties to tackle the emergence of multi-drug resistance. Targeting quorum sensing controlled virulence factors and biofilms has come out to be a novel anti-infective drug target. The silver nanoparticles (Ag@CC-NPs) were synthesized from aqueous extract of Carum copticum and characterized using UV-vis absorption spectroscopy, fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Ag@CC-NPs were checked for its ability to inhibit quorum sensing-mediated virulence factors and biofilms against three test pathogens at sub-MIC values. There was ~75% inhibition of violacein production by Ag@CC-NPs against C. violaceum. The P. aeruginosa virulence factors such as pyocyanin production, pyoverdin production, exoprotease activity, elastase activity, swimming motility and rhamnolipid production were inhibited by 76.9, 49.0, 71.1, 53.3, 89.5, and 60.0% at sub-MIC. Moreover, virulence factors of S. marcescens viz. prodigiosin production, exoprotease activity, and swarming motility was reduced by 78.4, 67.8, and 90.7%. Ag@CC-NPs also exhibited broad-spectrum antibiofilm activity with 77.6, 86.3, and 75.1% inhibition of biofilms of P. aeruginosa, S. marcescens, and C. violaceum respectively. The biofilm formation on glass coverslip was reduced remarkably as evident from SEM and CLSM analysis. The findings revealed the in vitro efficacy of Ag@CC-NPs against bacterial pathogens and can be exploited in the development of alternative therapeutic agent in management of bacterial infections for topical application, mainly wound infection, or coating of surfaces to prevent bacterial adherence on medical devices.

Synthesis, Characterization and Assessment of the Antioxidant Activity of Cu(II), Zn(II) and Cd(II) Complexes Derived from Scorpionate Ligands.

Seeking to enrich the yet less explored field of scorpionate complexes bearing antioxidant properties, we, here, report on the synthesis, characterization and assessment of the antioxidant activity of new complexes derived from three scorpionate ligands. The interaction between the scorpionate ligands thallium(I) hydrotris(5-methyl-indazolyl)borate (TlTp4Bo,5Me), thallium(I) hydrotris(4,5-dihydro-2H-benzo[g]indazolyl)borate (TlTpa) and potassium hydrotris(3-tert-butyl- pyrazolyl)borate (KTptBu), and metal(II) chlorides, in dichloromethane at room temperature, produced a new family of complexes having the stoichiometric formula [M(Tp4Bo,5Me)2] (M = Cu, 1; Zn, 4; Cd, 7), [M(Tpa)2] (M = Cu, 2; Zn, 5; Cd, 8), [Cu(HpztBu)3Cl2] (3), [Zn(TptBu)Cl] (6) and [Cd(BptBu)(HpztBu)Cl] (9). The obtained metal complexes were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance and elemental analysis, highlighting the total and partial hydrolysis of the scorpionate ligand TptBu during the synthesis of the Cu(II) complex 3 and the Cd(II) complex 9, respectively. An assessment of the antioxidant activity of the obtained metal complexes was performed through both enzymatic and non-enzymatic assays against 1,1-diphenyl-2-picryl- hydrazyl (DPPH·), 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS+·), hydroxyl (HO·), nitric oxide (NO·), superoxide (O2-) and peroxide (OOH·) radicals. In particular, the complex [Cu(Tpa)2]⋅0.5H2O (2) exhibited significant antioxidant activity, as good and specific activity against superoxide (O2-·), (IC50 values equal to 5.6 ± 0.2 µM) and might be identified as auspicious SOD-mimics (SOD = superoxide dismutase).

Role of Copper Oxide on Epoxy Coatings with New Intumescent Polymer-Based Fire Retardant.

Epoxy resins (EP) have been used as a thermos-setting material in the field of coating, casting, bonding agent, and laminating. However, a major drawback associated with its use is the lack of good flaming properties, and it is responsible for heavy smoke along with hazardous gases considerably limiting its uses in various fields. In this study, N-ethanolamine triazine-piperizine, a melamine polymer (ETPMP), was established as a new charring-foaming agent and was successfully synthesized with ethanolamine, piperizine, cyanuric chloride, and melamine as precursor molecules via the nucleophilic substitution reaction method. Elemental analysis and Fourier transform infrared (FTIR) spectroscopy analysis were applied to approve the synthesis of ETPMP and confirmation of its structure and characterization. The epoxy coating of intumescent flame retardant (IFR) was equipped by introducing ETPMP, ammonium polyphosphate (APP), and copper oxide (CuO) in multiple composition ratios. CuO was loaded at various amounts into the IFR-coating system as a synergistic agent. The synergistic action of CuO on IFR coatings was scientifically examined by using different analytical tests such as vertical burning test (UL-94V), limited oxygen index (LOI), thermal gravimetric analysis (TGA), cone calorimeter, and scanning electron microscope (SEM). The results showed that small changes in the amount of CuO expressively amplified the LOI results and enhanced the V-0 ratings in the UL-94V test. The TGA data clearly demonstrate that the inclusion of CuO can transform the thermal deprivation behavior of coatings with a growing char slag proportion with elevated temperatures. Information from cone calorimeter data affirmed that CuO can decrease the burning factors by total heat release (THR) together with peak heat release rate (PHRR). The SEM images indicated that CuO can enrich the power and compression of the intumescent char that restricts the movement of heat and oxygen. Our results demonstrate a positive influence of CuO on the epoxy-headed intumescent flame retardant coatings.

Coumarin Derived "Turn on" Fluorescent Sensor for Selective Detection of Cadmium (II) Ion: Spectroscopic Studies and Validation of Sensing Mechanism by DFT Calculations.

A novel coumarin based Schiff base sensor probe 1, was synthesized and structural elucidation was carried out by FTIR, UV-vis, 1H and 13C NMR and MS spectroscopy. The optical properties of the sensor probe were investigated by employing absorption and fluorescence titrations which showed specific recognition behaviour being highly selective towards Cd2+ over the other 3d transition metal ions. The strong fluorometric response of probe 1 towards Cd2+ ion is attributed to inhibition of C=N isomerization effect upon coordination of the metal ion. The binding stoichiometry was determined by Job's plot and the probable sensing mechanism of the probe towards Cd2+ was investigated by employing FTIR spectra analysis and 1H NMR titration experiments. Computational validation of the sensing mechanism in various modes towards Cd2+ was also performed by carrying out the DFT studies which were found to be in good concordance with the experimental results. The reversible nature of the probe was studied by EDTA titration indicating that it can be reused. Interaction studies of the sensor probe with the BSA showed the practical applicability for the quantitative determination of Cd2+ concentration in the blood plasma. The lower detection limit of the probe upto 0.114 µM further proves its practical application in the sensing phenomenon.

Design, Synthesis, and Biological Evaluation of Benzimidazole-Derived Biocompatible Copper(II) and Zinc(II) Complexes as Anticancer Chemotherapeutics.

Herein, we have synthesized and characterized a new benzimidazole-derived "BnI" ligand and its copper(II) complex, [Cu(BnI)2], 1, and zinc(II) complex, [Zn(BnI)2], 2, using elemental analysis and various spectroscopic techniques. Interaction of complexes 1 and 2 with the biomolecules viz. HSA (human serum albumin) and DNA were studied using absorption titration, fluorescence techniques, and in silico molecular docking studies. The results exhibited the significant binding propensity of both complexes 1 and 2, but complex 1 showed more avid binding to HSA and DNA. Also, the nuclease activity of 1 and 2 was analyzed for pBR322 DNA, and the results obtained confirmed the potential of the complexes to cleave DNA. Moreover, the mechanistic pathway was studied in the presence of various radical scavengers, which revealed that ROS (reactive oxygen species) are responsible for the nuclease activity in complex 1, whereas in complex 2, the possibility of hydrolytic cleavage also exists. Furthermore, the cytotoxicity of the ligand and complexes 1 and 2 were studied on a panel of five different human cancer cells, namely: HepG2, SK-MEL-1, HT018, HeLa, and MDA-MB 231, and compared with the standard drug, cisplatin. The results are quite promising against MDA-MB 231 (breast cancer cell line of 1), with an IC50 value that is nearly the same as the standard drug. Apoptosis was induced by complex 1 on MDA-MB 231 cells predominantly as studied by flow cytometry (FACS). The adhesion and migration of cancer cells were also examined upon treatment of complexes 1 and 2. Furthermore, the in vivo chronic toxicity profile of complexes 1 and 2 was also studied on all of the major organs of the mice, and found them to be less toxic. Thus, the results warrant further investigations of complex 1.

Evaluation of Transition Metal Complexes of Benzimidazole-Derived Scaffold as Promising Anticancer Chemotherapeutics.

Three new transition metal complexes, Cu(II) 1, Co(II) 2, and Zn(II) 3 with ligand "bimnap" derived from 1-methyl-2-aminobenzimidazole and 2-hydroxynapthaldehyde were synthesized and characterized. The structure of the ligand was determined by single X-ray crystallography. All the three complexes, 1⁻3, were examined for the mode of interaction with biomolecule viz., calf thymus-DNA (CT-DNA) using various spectroscopic methods. The nuclease activity was performed against pBR322 DNA that exhibited concentration-dependent degradation of the nucleic acid. The mechanism of DNA cleavage was studied by the electrophoretic pattern in the presence of the radical scavengers. Also, the complexes 1⁻3 were analyzed for groove binding affinity. Moreover, in vitro cytotoxicities of the complexes 1⁻3 were tested against the five human cancer cell lines, i.e., HeLa, SK-MEL-1, HepG2, HT108, and MDA-MB 231. Also, the cell adhesion and migration properties upon treatment of cell lines with complexes 1⁻3, and consequently, their cell death pathway via apoptosis and necrosis were analyzed. Further, complexes 1⁻3 were studied in vivo for their toxicities and tolerabilities in mice. In sum, the complexes 1⁻3 showed merits of an effective anticancer agent in cell lines⁻based study while minor side effects were observed in vivo.A green solvent extraction technology involving a microwave processing method was used to increase the content of minor ginsenosides from Panax notoginseng. This article aims to investigate the optimization of preparation of the minor ginsenosides by this microwave processing method using single-factor experiments and response surface methodology (RSM), and discuss the blood-enriching activity and hemostatic activity of the extract of microwave processed P. notoginseng (EMPN) The RSM for production of the minor ginsenosides was based on a three-factor and three-level Box-Behnken design. When the optimum conditions of microwave power, temperature and time were 495.03 W, 150.68 °C and 20.32 min, respectively, results predicted that the yield of total minor ginsenosides (Y9) would be 93.13%. The actual value of Y9 was very similar to the predicted value. In addition, the pharmacological results of EMPN in vivo showed that EMPN had the effect of enriching blood in N-acetylphenylhydrazine (APH) and cyclophosphamide (CTX)-induced blood deficient mice because of the increasing content of white blood cells (WBCs) and hemoglobin (HGB) in blood. Hemostatic activity in vitro of EMPN showed that it had significantly shortened the clotting time in PT testing (p < 0.05). The hemostatic effect of EMPN was mainly caused by its components of Rh4, 20(S)-Rg3 and 20(R)-Rg3. This microwave processing method is simple and suitable to mass-produce the minor ginsenosides from P. notoginseng.

Ti3AlC2 MAX Phase Modified Screen-Printed Electrode for the Fabrication of Hydrazine Sensor.

Hydrazine is considered a powerful reducing agent and catalyst, showing diverse applications in agricultural industries, toxic degradation research, and wastewater management. Additionally, hydrazine can trigger some specific reactions when combined with suitable oxidants. Due to its highly polar nature, hydrazine can easily dissolve in alcohol, water, and various other polar solvents. Therefore, it can be extensively utilized in different areas of application and industries such as rocketry and various chemical applications. Despite its beneficial properties, hydrazine is unstable, posing significant risk due to its highly toxic nature. It is extremely hazardous to both human health and the environment. It can cause various illnesses and symptoms such as dizziness, temporary blindness, damage to the central nervous system, and even death when inhaled in sufficient quantities. Therefore, it is highly important to monitor the level of hydrazine to prevent its toxic and hazardous effects on human beings and the environment. In the present study, we discuss the simple fabrication of a disposable cost-effective and eco-friendly hydrazine sensor. We used a screen-printed carbon electrode, i.e., SPCE, as a base for the construction of a hydrazine sensor. The Ti3AlC2 MAX has been used as a suitable and efficient electrode material for the fabrication of disposable hydrazine sensors. We modified the active surface of the SPCE using a drop-casting approach. The resulting Ti3AlC2 MAX modified SPCE (Ti3AlC2@SPCE) has been utilized as an efficient and low-cost hydrazine sensor. Cyclic voltammetry, i.e., CV, and linear sweep voltammetry, viz., LSV, was employed as a sensing technique in this study. The optimization of pH and electrode material loading was conducted. The Ti3AlC2@SPCE exhibited excellent sensing performance toward hydrazine oxidation. A reasonable detection limit (0.01 µM) was achieved for hydrazine sensing. The fabricated sensor also demonstrated a reasonable linear range of 1-50 µM. This work provides the design and fabrication of simple disposable Ti3AlC2@SPCE as a suitable electrode for the determination of hydrazine using LSV technology.

In Situ Fabrication and Characterization of g-C3N4 onto Cellulose Nanofibers and Selective Separation of Heavy Metal Ions.

Graphitic carbon nitride nanosheets were synthesized onto cellulose nanofiber surfaces utilizing an eco-friendly salt melt approach. The fabricated material CNF@C3N4 selectively removes Ni(II) and Cu(II) from electroplating wastewater samples. The immobilization of g-C3N4 on solid substrates eases handling of nanomaterial in a flow-through approach and mitigates sorbent loss during column operations. Characterization techniques such as scanning electron microscopy, tunneling electron microscopy, and X-ray photoelectron microscopy were employed to analyze the surface morphology and chemical bonding within the synthesized material. Selective Cu(II) and Ni(II) sorption predominantly arises from the soft-soft interaction between metal ions and associated nitrogen groups. An inner-sphere surface complexation mechanism effectively elucidated the interaction dynamics between the metal and CNF@C3N4. Experimental findings demonstrated satisfactory separation of Ni(II) and Cu(II) ions, with the extraction of 340.0 and 385.0 mg g-1 of material, respectively. Additionally, the devised technique was executed for the preconcentration and quantification of trace metals ions in water samples with a detection limit and limit of quantification of 0.06 and 0.20 µg L-1, respectively.

Preconcentration and selective extraction of trace Hg(ii) by polymeric g-C3N4 nanosheet-packed SPE column.

In this study, we successfully synthesized polymeric graphitic carbon nitride (g-C3N4) nanosheets through thermal means and proposed their application in solid-phase extraction (SPE) for the enrichment of trace Hg(ii). The nanosheets underwent characterization using scanning electron microscopy, tunnelling electron microscopy, and energy-dispersive X-ray spectroscopy. The column packed with polymeric carbon nitride nanosheets demonstrated effective extraction of trace Hg(ii) ions from complex samples. The g-C3N4 nanosheets possess a zeta potential value of -20 mV, enabling strong interaction with positively charged divalent Hg(ii) ions. This interaction leads to the formation of stable chelates with the nitrogen atoms present in the polytriazine and heptazine units of the material. The proposed method exhibited a high preconcentration limit of 0.33 µg L-1, making it suitable for analysing trace amounts of Hg(ii) ions. Moreover, the method's applicability was confirmed through successful analysis of real samples, achieving an impressive preconcentration factor of 200. The detection limit for trace Hg(ii) ions was determined to be 0.6 µg L-1. To assess the accuracy of the method, we evaluated its performance by recovering spiked amounts of Hg(ii) and by analysing certified reference materials. The results indicated excellent precision, with RSD consistently below 5% for all the analyses conducted. In conclusion, the thermally synthesized polymeric carbon nitride nanosheets present a promising approach for solid-phase extraction and preconcentration of trace Hg(ii) from real samples. The method showcases high efficiency, sensitivity, and accuracy, making it a valuable tool for environmental and analytical applications.

MoS2/S@g-CN Composite Electrode for L-Tryptophan Sensing.

L-tryptophan (L-TRP) is an essential amino acid responsible for the establishment and maintenance of a positive nitrogen equilibrium in the nutrition of human beings. Therefore, it is vital to quantify the amount of L-tryptophan in our body. Herein, we report the MoS2/S@g-CN-modified glassy carbon electrode for the electrochemical detection of L-tryptophan (L-TRP). The MoS2/S@g-CN composite was successfully synthesized using an efficient and cost-effective hydrothermal method. The physical and chemical properties of the synthesized composite were analyzed using powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and energy-dispersive X-ray analysis (EDX). The crystallite size of the composite was calculated as 39.4 nm, with porous balls of MoS2 decorated over the S@g-CN surface. The XPS spectrum confirmed the presence of Mo, S, O, C, and N elements in the sample. The synthesized nanocomposite was further used to modify the glassy carbon (GC) electrode (MoS2/S@g-CN/GC). This MoS2/S@g-CN/GC was used for the electrochemical detection of L-TRP using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. For the purpose of comparison, the effects of the scanning rate and the concentration of L-TRP on the current response for the bare GC, S@g-CN/GC, MoS2/GC, and MoS2/S@g-CN/GC were studied in detail. The MoS2/S@g-CN-modified GC electrode exhibited a rational limit of detection (LoD) of 0.03 µM and a sensitivity of 1.74 µA/ µMcm2, with excellent stability, efficient repeatability, and high selectivity for L-TRP detection.

Fabrication of an Azithromycin Sensor.

Azithromycin (AZY) is a well-known top-prioritized antibiotic and is used by humans in strong concentrations. However, the side effects of the AZY antibiotic may cause some serious and significant damage to humans and the environment. Thus, there is a need to develop effective and sensitive sensors to monitor accurate concentrations of AZY. In the last decade, electrochemistry-based sensors have received enormous attention from the scientific community because of their high sensitivity, selectivity, cost-effectiveness, fast response, rapid detection response, simple fabrication, and working principle. It is important to mention that electrochemical sensors rely on the properties of electrode modifiers. Hence, the selection of electrode materials is of great significance when designing and developing efficient and robust electrochemical sensors. In this study, we fabricated an AZY sensor by utilizing a molybdenum disulfide/titanium aluminum carbide (MoS2@Ti3AlC2) composite as the electrode material. The MoS2@Ti3AlC2 composite was synthesized via a simple sonication process. The synthesized MoS2@Ti3AlC2 composite was characterized using a powder X-ray diffraction (XRD) method to examine the phase purity and formation of the MoS2@Ti3AlC2 composite. Scanning electron microscopy (SEM) was used to study the surface morphological features of the prepared MoS2@Ti3AlC2 composite, whereas energy dispersive X-ray spectroscopy (EDAX) was adopted to determine the elemental composition of the prepared MoS2@Ti3AlC2 composite. The glassy carbon (GC) electrode was modified with the prepared MoS2@Ti3AlC2 composite and applied as the AZY sensor. The sensing performance of the MoS2@Ti3AlC2 composite-modified GC electrode was studied using linear sweep voltammetry. The sensor demonstrated excellent performance when determining AZY and showed a good detection limit of 0.009 µM with a sensitivity of 6.77 µA/µM.cm2.

Recent advances in synthesis and characterization of iron-nickel bimetallic nanoparticles and their applications as photo-catalyst and fuel additive.

Iron-nickel bimetallic nanoparticles (Fe-Ni BMNPs) are prepared by combining two different metals by using the bottom-up approach. The resulting material has entirely different properties as compared to both the metals. The product is examined by using different analytical instruments such as.; scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), MDIJADE, ORIGIN pro to characterize their morphology, crystallinity and elemental composition and the final data has been statistically analyzed. SEM findings show that most nanoparticles are irregular in form and range in size from 10 nm to 100 nm. The findings of the TEM verified that the particles between 10 nm and 50 nm are irregular in size shape. The products acquired utilized as a fuel additive to monitor oil effectiveness by studying various parameters. The degradation of methylene blue dye depends directly on the concentration of the nanocatalyst. Different parameters also use the freshly prepared bimetallic nanocatalyst to investigate the efficacy of the kerosene fuel. By adding a tiny quantity of the nanocatalyst, the value of the flash point and fire point is significantly reduced. The nanocatalyst does not affect the cloud point and pour point to a large extent. The bimetallic nanocatalyst therefore has very excellent catalytic characteristics.

Covalently linked mercaptoacetic acid on ZrO2 coupled cellulose nanofibers for solid phase extraction of Hg(ii): experimental and DFT studies.

Zirconium oxide (ZrO2) nanoparticles were introduced onto cellulose nanofibers after being covalently functionalized with mercaptoacetic acid. We experimentally demonstrate that the nanocomposite is capable of selectively capturing Hg(ii) from aqueous samples down to trace level concentrations. Density functional theory (DFT) calculations indicate that energetically favorable R-S → Hg ← O-R bidentate complex formation enhances the rapid adsorption, leading to selective extraction of Hg(ii). Furthermore, the loss of ZrO2 particles during flow-through studies is controlled and restricted after binding to CNF rather than being used directly in the column. The Hg(ii) selectivity is primarily due to the Lewis soft-soft acid-base chelation of Hg(ii) with the mercapto functionalities of the adsorbent. The experimental observations depict a high sorption capacity of 280.5 mg g-1 for Hg(ii). The limit of detection and quantification of the proposed approach were found to be 0.04 µg L-1 and 0.15 µg L-1, respectively. Analytical method accuracy and validity were determined by analyzing Standard Reference Materials and by the standard addition method (recovery > 95% with a 5% RSD). The findings of a Student's t-test were found to be lower than the critical Student's t value. Real water samples were successfully analyzed using the developed procedure.

Systematic study of physicochemical and electrochemical properties of carbon nanomaterials.

Carbon nanomaterials exhibit exceptional properties and broad horizon applications, where graphene is one of the most popular allotropes of this family due to its astounding performance in every stratum vis-à-vis other classical materials. The large surface area of 2630 m2 g-1, high electrical conductivity, and electron mobility of non-toxic graphene nanomaterials serve as the building blocks for supercapacitor studies. In this article, comparative studies are carried out between electrochemically exfoliated graphene sheets (GSs), solvothermally synthesized graphene quantum dots (GQDs) and acid refluxed carbon nanotubes (CNTs) as an energy storage electrode nanomaterial through cyclic voltammetry (CV). The electrochemical properties of the materials are well correlated with the physicochemical characteristics obtained from Raman, Fourier-transform infrared, and absorption spectroscopy. Thin GSs (0.8-1 nm) and small size (6-10 nm) GQDs fabricated by using laboratory-grade 99% purity graphite rods resulted in promising low-cost materials at mass scale as compared to conducting CNTs. The 0D graphene quantum dots proved to be an excellent energy electrode material in an alkaline electrolyte solution compared to other carbon nanomaterials. The distinct characteristic features of GQDs, like superior electrical properties, large surface area, and abundant active sites make them an ideal candidate for utilization in supercapacitors. The GQDs exhibited an enhanced specific capacitance of 113 F g-1 in 6 mol L-1 KOH through cyclic voltammetry.

Numerical Simulation of NH3(CH2)2NH3MnCl4 Based Pb-Free Perovskite Solar Cells Via SCAPS-1D.

Recently, the design and fabrication of lead (Pb)-free perovskite or perovskite-like materials have received great interest for the development of perovskite solar cells (PSCs). Manganese (Mn) is a less toxic element, which may be an alternative to Pb. In this work, we explored the role of NH3(CH2)2NH3MnCl4 perovskite as a light absorber layer via SCAPS-1D. A Pb-free PSC device (FTO/TiO2/NH3(CH2)2NH3MnCl4/spiro-OMeTAD/Au) was simulated via SCAPS-1D software. The simulated Pb-free PSCs (FTO/TiO2/NH3(CH2)2NH3MnCl4/spiro-OMeTAD/Au) showed decent power conversion efficiency (PCE) of 20.19%. Further, the impact of the thickness of absorber (NH3(CH2)2NH3MnCl4), electron transport (TiO2), and hole-transport (spiro-OMeTAD) layers were also investigated. Subsequently, various electron transport layers (ETLs) were also introduced to investigate the role of ETL. In further studies, an NH3(CH2)2NH3MnCl4-based PSC device (FTO/TiO2/NH3(CH2)2NH3MnCl4/spiro-OMeTAD/Au) was also developed (humidity = ~30-40%). The fabricated PSCs displayed an open circuit voltage (Voc) of 510 mV with a PCE of 0.12%.

Selective Extraction of Trace Arsenite Ions Using a Highly Porous Aluminum Oxide Membrane with Ordered Nanopores.

Metal ion extraction and determination at trace level concentration are challenging due to sample complexity or spectral interferences. Herein, we prepared a through-hole aluminum oxide membrane (AOM) by electrochemical anodization of aluminum substrates. The prepared AOM was characterized by scanning electron microscopy, surface area analysis, porosity measurements, and X-ray photoelectron spectroscopy. The AOM with ordered nanopores was highly porous and possess inherent binding sites for selective arsenite sorption. The AOM was used as a novel sorbent for solid-phase microextraction and preconcentration of arsenite ions in water samples. The AOM's sub-micrometer thickness allows water molecules to flow freely across the pores. Before instrumental determination, the suggested microextraction approach removes spectral interferents and improves the analyte ion concentration, with a detection limit of 0.02 µg L-1. Analyzing a standard reference material was used to validate the procedure. Student's t-test value was less than critical Student's t-value of 4.303 at a 95% confidence level. With coefficients of variation of 3.25%, good precision was achieved.