RESUMEN
Available evidence illustrates that microbiome is a promising target for the study of growth, diagnosis and therapy of various types of cancer. Lung cancer is a leading cause of cancer death worldwide. The relationship of microbiota and their products with diverse pathologic conditions has been getting large attention. The novel research suggests that the microbiome plays an important role in the growth and progression of lung cancer. The lung microbiome plays a crucial role in maintaining mucosal immunity and synchronizing the stability between tolerance and inflammation. Alteration in microbiome is identified as a critical player in the progression of lung cancer and negatively impacts the patient. Studies suggest that healthy microbiome is essential for effective therapy. Various clinical trials and research are focusing on enhancing the treatment efficacy by altering the microbiome. The regulation of microbiota will provide innovative and promising treatment strategies for the maintenance of host homeostasis and the prevention of lung cancer in lung cancer patients. In the current review article, we presented the latest progress about the involvement of microbiome in the growth and diagnosis of lung cancer. Furthermore, we also assessed the therapeutic status of the microbiome for the management and treatment of lung cancer.
RESUMEN
The penicillin derivative amoxicillin (AMX) plays an important role in treating various types of infections caused by bacteria. However, excessive use of AMX may have negative health effects. Therefore, it is of utmost importance to detect and quantify the AMX in pharmaceutical drugs, biological fluids, and environmental samples with high sensitivity. Therefore, this review article provides valuable and up-to-date information on nanostructured material-based optical and electrochemical sensors to detect AMX in various biological and chemical samples. The role of using different nanostructured materials on the performance of important optical sensors such as colorimetric sensors, fluorescence sensors, surface-enhanced Raman scattering sensors, chemiluminescence/electroluminescence sensors, optical immunosensors, optical fibre-based sensors, and several important electrochemical sensors based on different electrode types have been discussed. Moreover, nanocomposites, polymer, and MXenes-based electrochemical sensors have also been discussed, in which such materials are being used to further enhance the sensitivity of these sensors. Furthermore, nanocomposite-based photo-electrochemical sensors and the market availability of biosensors including AMX have also been discussed briefly. Finally, the conclusion, challenges, and future perspectives of the above-mentioned sensing techniques for AMX detection are presented.
Asunto(s)
Técnicas Biosensibles , Nanocompuestos , Antibacterianos , Amoxicilina , Técnicas Biosensibles/métodos , Inmunoensayo , Técnicas Electroquímicas/métodosRESUMEN
Objective: The objectives of this study were to explore the wastage of narcotics and controlled medications and, their financial impact in a tertiary care setting over a one-year period. Methodology: The study period was of one year, i.e., October 2020 - September 2021. The venue of study was a tertiary care hospital. The narcotic medications included Fentanyl, Tramadol, Morphine, and Meperidine. The controlled medications included Midazolam, Phenobarbital, Diazepam, Ketamine and Lorazepam. The annual consumption and wastage of the narcotic and controlled medications were documented using data report generated by narcotics and controlled medication in-charge pharmacist through the hospital's online system. Data was reported using average, minimum and maximum values. Quantities of wastage is expressed in terms of ampoules. Costs per ampoule were calculated and expressed in both Saudi Riyal (SAR) and United States Dollar (USD). The study was approved by an ethics committee. Results: The annual wastage of narcotics was 3.19 % while the same for controlled medications was 21.3 %. An annual wastage of 3.81 % was reported for narcotics and controlled medications combined. The total wastage cost of narcotics and controlled medications was 15,443.1 SAR that was equivalent to USD 4085.5. Fentanyl 500mcg formulations had the highest consumption, i.e., 28,580 ampoules followed by Morphine 10 mg formulations, i.e., 27,122 ampoules. The highest ampoule wastage was observed for Morphine 10 mg formulations, i.e., 1956 ampoules. The highest % wastage was observed for Midazolam formulations, i.e., 29.3 %. Conclusion: The overall wastage was less than 5% of the total consumption, however, midazolam was observed to have the highest wastage. Shifting to prefilled syringes supplied by pharmacies, making protocols, and safely pooling costly drugs could result in significant savings.
RESUMEN
Organic solar cells are famous for their cheap solution processing. Their industrialization needs fast designing of efficient materials. For this purpose, testing of large number of materials is necessary. Machine learning is a better option due to cheaper prediction of power conversion efficiencies. In the present work, machine learning was used to predict power conversion efficiencies. Experimental data were collected from the literature to feed the machine learning models. A detailed data visualization analysis was performed to study the trends of the dataset. The relationship between descriptors and power conversion efficiency was quantitatively determined by Pearson correlations. The importance of features was also determined using feature importance analysis. More than 10 machine learning models were tried to find better models. Only the two best models (random forest regressor and bagging regressor) were selected for further analysis. The prediction ability of these models was high. The coefficient of determination (R2) values for the random forest regressor and bagging regressor models were 0.892 and 0.887, respectively. The Shapley additive explanation (SHAP) method was used to identify the impact of descriptors on the output of models.
Asunto(s)
Visualización de Datos , Aprendizaje Automático , Proyectos de InvestigaciónRESUMEN
Iron oxide nanoparticle (ION)-based ferro-nanofluids (FNs) have been used for different technological applications owing to their excellent magneto-rheological properties. A comprehensive overview of the current advancement of FNs based on IONs for various engineering applications is unquestionably necessary. Hence, in this review article, various important advanced technological applications of ION-based FNs concerning different engineering fields are critically summarized. The chemical engineering applications are mainly focused on mass transfer processes. Similarly, the electrical and electronics engineering applications are mainly focused on magnetic field sensors, FN-based temperature sensors and tilt sensors, microelectromechanical systems (MEMS) and on-chip components, actuators, and cooling for electronic devices and photovoltaic thermal systems. On the other hand, environmental engineering applications encompass water and air purification. Moreover, mechanical engineering or magneto-rheological applications include dampers and sealings. This review article provides up-to-date information related to the technological advancements and emerging trends in ION-based FN research concerning various engineering fields, as well as discusses the challenges and future perspectives.
Asunto(s)
Electrónica , Sistemas Microelectromecánicos , Tecnología , Electricidad , Nanopartículas Magnéticas de Óxido de HierroRESUMEN
The economic developments around the globe resulted in the increased demand of energy, which overburdened the supply chain sources of energy. Fossil fuel reserves are exploited to meet the high demand of energy and their combustion is becoming the main source of environmental pollution. So there is dire need to find safe, renewable and sustainable energy resources. Waste to energy (WtE) may be viewed as a possible alternate source of energy, which is economically and environmentally sustainable. Municipal solid waste (MSW) is a major contributor to the development of renewable energy and sustainable environment. At present the scarcity of renewable energy resources and disposal of MSW is a challenging problem for the developing countries, which has generated a wide ranging socioeconomic and environmental problems. This situation stimulates the researchers to develop alternatives for converting WtE under a variety of scenarios. Herein, the present scenario in developing the WtE technologies such as, thermal conversion methods (Incineration, Gasification, Pyrolysis, Torrefaction), Plasma technology, Biochemical methods, Chemical and Mechanical methods, Bio-electrochemical process, Mechanical biological treatment (MBT), Photo-biological processes for efficacious energy recovery and the challenges confronted by developing and developed countries. In this review, a framework for the evaluation of WtE technologies has been presented for the ease of researchers working in the field. Furthermore, this review concluded that WtE is a potential renewable energy source that will partially satisfy the demand for energy and ensure an efficient MSW management to overcome the environmental pollution.
Asunto(s)
Eliminación de Residuos , Administración de Residuos , Biomasa , Incineración , Residuos Sólidos , TecnologíaRESUMEN
Triple layered tablet having various excipients and a new combination of APIs i.e. amlodipine besylate, rosuvastatin calcium and hydrochlorothiazide was prepared through wet granulation. The concentration of disintegrant and diluent was kept different in formulations of all APIs. At compression stage, nine different formulations from H1 to H9 having different combinations were prepared. Layers T1, T2 and T3 of all the three APIs had disintegrant concentration of 3%, 5% and 7 % respectively. In vitro analysis of granules was made by determining angle of repose, loss on drying, bulk density, tapped density, hausner ratio. Results of all these parameters were quite similar in all layers, which showed that change in disintegrant concentration does not affect the flow ability of granules to much extent. After compression, tablets were further subjected to weight variation, hardness, thickness, friability, disintegration, dissolution studies and FTIR. In vitro drug release data of all formulations were studied which showed that all the formulations exhibited zero order release. Results indicated that H8 had the best results in terms of physicochemical properties, assay and dissolution studies. The external morphology of formulations were further analyzed using scanning electron microscopy and differential scanning calorimetry. Triple layered tablet was successfully developed and characterized.
Asunto(s)
Amlodipino/administración & dosificación , Hidroclorotiazida/administración & dosificación , Rosuvastatina Cálcica/administración & dosificación , Rastreo Diferencial de Calorimetría , Combinación de Medicamentos , Composición de Medicamentos/métodos , Liberación de Fármacos , Dureza , Microscopía Electrónica de Rastreo , ComprimidosRESUMEN
Nanostructures play an important role in targeting sparingly water-soluble drugs to specific sites. Because of the structural flexibility and stability, the use of template microemulsions (µEs) can produce functional nanopharmaceuticals of different sizes, shapes, and chemical properties. In this article, we report a new volatile oil-in-water (o/w) µE formulation comprising ethyl acetate/ethanol/brij-35/water to obtain the highly water-dispersible nanoparticles of an antihyperlipidemic agent, ezetimibe (EZM-NPs), to enhance its dissolution profile. A pseudoternary phase diagram was delineated in a specified brij-35/ethanol ratio (1:1) to describe the transparent, optically isotropic domain of the as-formulated µE. The water-dilutable µE formulation, comprising an optimum composition of ethyl acetate (18.0%), ethanol (25.0%), brij-35 (25.0%), and water (32.0%), showed a good dissolvability of EZM around 4.8 wt % at pH 5.2. Electron micrographs showed a fine monomodal collection of EZM-loaded µE droplets (â¼45 nm) that did not coalesce even after lyophilization, forming small spherical EZM-NPs (â¼60 nm). However, the maturity of nanodrug droplets observed through dynamic light scattering suggests the affinity of EZM to the nonpolar microenvironment, which was further supported through peak-to-peak correlation of infrared analysis and fluorescence measurements. Moreover, the release profile of the as-obtained EZM-nanopowder increased significantly >98% in 30 min, which indicates that a reduced drug concentration will be needed for capsules or tablets in the future and can be simply incorporated into the multidosage formulation of EZM.
Asunto(s)
Hipolipemiantes , Agua , Emulsiones , Ezetimiba , SolubilidadRESUMEN
The current study was designed to check the antioxidant and enzyme inhibition potential of various extracts/ fractions of three selected plants. The aerial parts of Conocarpus erectus (Combretaceae), Ficus variegata (Moraceae) and Ficus maclellandii (Moraceae) were extracted with ethanol (95%) and the resulting crude extracts were partitioned with n-hexane, chloroform and n-butanol successively. Folin-Ciocalteu reagent was used to calculate the total phenolic contents, flavonoids contents were calculated with aluminum chloride while antioxidant and enzyme studies were carried out through standard protocols. All extracts/fractions contained reasonable amount of phenolic compounds ranging from 0.58-58.23 mg CE/g of DW and 0.43-30.56 mg GAE/g of DW. Total flavonoids were determined using rutin and quercetin standards, ranging from 2.65-18.2 mg rutin equivalent/g of dry weight and 0.92-5.41 mg quercetin equivalent/g of dry weight. Antioxidant studies such as DPPH inhibition FRAP and total antioxidant capacity (TAC) was checked. The crude ethanolic extract of C. erectus showed maximum antiradical scavenging power (90.43%; IC50=7 µg) and ferric reducing antioxidant power (16.5 µM eq.FeSO4.7H2O), respectively while leave extract of F. variegata (chloroform) was the most active (0.6577) in TAC among other extracts of the selected medicinal plants. Butanolic leave extract of C. erectus exhibited maximum enzyme inhibition activity (91.62% with IC50 40 µg/ml) while other extracts showed significant activity. It was observed from results that all extracts/fractions of under consideration plants, exhibited significant bioactivities especially ethanolic and butanolic fractions, which may be the richest source of such type of activities.
Asunto(s)
Antioxidantes/farmacología , Inhibidores de la Colinesterasa/farmacología , Combretaceae/química , Ficus/química , Extractos Vegetales/farmacología , Acetilcolinesterasa/metabolismo , Antioxidantes/aislamiento & purificación , Compuestos de Bifenilo/química , Inhibidores de la Colinesterasa/aislamiento & purificación , Relación Dosis-Respuesta a Droga , Compuestos Férricos/química , Proteínas Ligadas a GPI/antagonistas & inhibidores , Proteínas Ligadas a GPI/metabolismo , Humanos , Fitoterapia , Picratos/química , Componentes Aéreos de las Plantas , Extractos Vegetales/aislamiento & purificación , Plantas Medicinales , Solventes/químicaRESUMEN
The present study describes the conductometric and spectroscopic study of the interaction of reactive anionic dyes, namely, reactive red 223 and reactive orange 122 with the cationic surfactant cetyltrimethyl ammonium bromide (CTAB). In a systematic investigation, the electrical conductivity data was used to calculate various thermodynamic parameters such as free energy (ΔG), enthalpy (ΔH), and the entropy (ΔS) of solubilization. The trend of change in these thermodynamic quantities indicates toward the entropy driven solubilization process. Moreover, the results from spectroscopic data reveal high degree of solubilization, with strong interactions observed in the cases of both dyes and the CTAB. The spontaneous nature of solubilization and binding was evident from the observed negative values of free energies (ΔG p and ΔG b).
Asunto(s)
Compuestos Azo/análisis , Compuestos de Cetrimonio/análisis , Colorantes/análisis , Análisis Espectral/métodos , Ésteres del Ácido Sulfúrico/análisis , Tensoactivos/análisis , Termodinámica , Compuestos Azo/metabolismo , Cetrimonio , Compuestos de Cetrimonio/metabolismo , Colorantes/metabolismo , Soluciones/análisis , Soluciones/metabolismo , Espectrofotometría Ultravioleta/métodos , Ésteres del Ácido Sulfúrico/metabolismo , Tensoactivos/metabolismo , Agua/análisis , Agua/metabolismoRESUMEN
Rhinoviruses (RVs) cause upper respiratory tract infections and pneumonia in children and adults. These non-enveloped viruses contain viral coats of four capsid proteins: VP1, VP2, VP3, and VP4. The canyon on VP1 used cell surface receptor ICAM-1 as the site of attachment and for the internalization of viruses. To date, there has been no drug or vaccine available against RVs. In this study, bioactive natural compounds of rosemary (Salvia rosmarinus L.), which are known for their pharmacological potential, were considered to target the VP1 protein. A total of 30 bioactive natural compounds of rosemary were taken as ligands to target viral proteins. The PkCSM tool was used to detect their adherence to Lipinski's rule of five and the ADMET properties of the selected ligands. Further, the CB-Dock tool was used for molecular docking studies between the VP1 protein and ligands. Based on the molecular docking and ADMET profiling results, phenethyl amine (4 methoxy benzyl) was selected as the lead compound. A comparative study was performed between the lead compound and two antiviral drugs, Placonaril and Nitazoxanide, to investigate the higher potential of natural compounds over synthetic drugs. Placonaril also targets VP1 but failed in clinical trials while Nitazoxanide was examined in clinical trials against rhinoviruses. It was discovered from this study that the (4 methoxy benzyl) phenethyl amine exhibited less toxicity in comparison to other tested drugs against RVs. More research is needed to determine its potential and make it a good medication against RVs.
Asunto(s)
Antivirales , Simulación del Acoplamiento Molecular , Aceites Volátiles , Extractos Vegetales , Rhinovirus , Antivirales/farmacología , Antivirales/química , Rhinovirus/efectos de los fármacos , Aceites Volátiles/farmacología , Aceites Volátiles/química , Extractos Vegetales/farmacología , Extractos Vegetales/química , Humanos , Rosmarinus/química , Simulación por Computador , Productos Biológicos/farmacología , Productos Biológicos/química , Proteínas de la Cápside/metabolismo , Proteínas de la Cápside/química , LigandosRESUMEN
The production of renewable materials from alternative sources is becoming increasingly important to reduce the detrimental environmental effects of their non-renewable counterparts and natural resources, while making them more economical and sustainable. Chemical surfactants, which are highly toxic and non-biodegradable, are used in a wide range of industrial and environmental applications harming humans, animals, plants, and other entities. Chemical surfactants can be substituted with biosurfactants (BS), which are produced by microorganisms like bacteria, fungi, and yeast. They have excellent emulsifying, foaming, and dispersing properties, as well as excellent biodegradability, lower toxicity, and the ability to remain stable under severe conditions, making them useful for a variety of industrial and environmental applications. Despite these advantages, BS derived from conventional resources and precursors (such as edible oils and carbohydrates) are expensive, limiting large-scale production of BS. In addition, the use of unconventional substrates such as agro-industrial wastes lowers the BS productivity and drives up production costs. However, overcoming the barriers to commercial-scale production is critical to the widespread adoption of these products. Overcoming these challenges would not only promote the use of environmentally friendly surfactants but also contribute to sustainable waste management and reduce dependence on non-renewable resources. This study explores the efficient use of wastes and other low-cost substrates to produce glycolipids BS, identifies efficient substrates for commercial production, and recommends strategies to improve productivity and use BS in environmental remediation.
Asunto(s)
Restauración y Remediación Ambiental , Glucolípidos , Tensoactivos , Tensoactivos/química , Restauración y Remediación Ambiental/métodos , Biodegradación AmbientalRESUMEN
Aberrant accumulation of protein misfolding can cause aggregation and fibrillation and is one of the primary characteristic features of neurodegenerative diseases. Because they are disordered, misfolded, and aggregated proteins pose a significant setback in drug designing. The structural study of intermediate steps in these kinds of aggregated proteins will allow us to determine the conformational changes as well as the probable pathways encompassing various neurodegenerative disorders. The analysis of protein aggregates involved in neurodegenerative diseases relies on a diverse toolkit of biophysical techniques, encompassing both morphological and non-morphological methods. Additionally, Thioflavin T (ThT) assays and Circular Dichroism (CD) spectroscopy facilitate investigations into aggregation kinetics and secondary structure alterations. The collective application of these biophysical techniques empowers researchers to comprehensively unravel the intricate nature of protein aggregates associated with neurodegeneration. Furthermore, the topics covered in this review have summed up a handful of well-established techniques used for the structural analysis of protein aggregation. This multifaceted approach advances our fundamental understanding of the underlying mechanisms driving neurodegenerative diseases and informs potential therapeutic strategies.
RESUMEN
The current systematic review presents COVID-19 vaccine hesitancy among parents for their children in Middle Eastern countries. Moreover, the vaccine acceptance rate of parents from the Middle East and the factors effecting the acceptance rate were reviewed and summarized. For this systematic review, basic electronic academic databases (Scopus, Science Direct, ProQuest, Web of Science and PubMed) were used for the search, along with a manual search on Google Scholar. This systematic review was conducted by following the "Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA)" guidelines. Moreover, utilizing the framework of the PECO-S (Population Exposure Comparison Outcome Study design), various observational studies were recruited for this review. Out of 2123 studies, 25 studies meeting the inclusion criteria were included in the current review. All of the included studies were about parental vaccine hesitancy for COVID-19 in Middle Eastern countries and published during 2020-2022. Overall, 25 research papers comprising 10 different Middle Eastern countries with 33,558 parents were included. The average age of parents was 39.13 (range: 18-70) years, while the mean age of children was 7.95 (range: 0-18) years. The overall hesitancy rate was 44.2% with a SD of ± 19.7. The included studies presented enhanced COVID-19 vaccine hesitancy among parents in Middle Eastern countries. The lower vaccine acceptance rate among parents was mainly because of a fear of the potential side effects. Furthermore, the lack of information regarding vaccine safety and efficacy, the fear of unreported side effects and concerns about the authenticity of vaccine development and preparation were the predictors of parental COVID-19 vaccine hesitancy among Middle Eastern countries.
RESUMEN
In Saudi Arabia, the Ministry of Health (MoH) has implemented strict rules to ensure COVID-19 vaccination uptake by the general public. However, there is hesitancy about COVID-19 vaccination among parents for their children worldwide. We aimed to determine the concerns, behaviors, perceptions, and hesitancy of COVID-19 vaccination among parents for their children in Saudi Arabia. Parents of children aged 5-11 years were included in this cross-sectional study. A total of 1507 responses were obtained using the convenience sampling technique. The data were analyzed using SPSS version 25.0 by applying descriptive and inferential statistics. Of the parents who responded, 74.5% believed that the COVID-19 vaccination could affect the genes of children, and 72.8% believed that the COVID-19 vaccination could have a greater number of positive impacts on the overall health of children. In total, 87% of the parents were satisfied with the vaccination services and effective policies of the MoH, Saudi Arabia. This study concluded that there is a greater need to increase public awareness regarding the beneficial impact of COVID-19 vaccination on the overall health of children. Effective awareness campaigns are also required to provide empirical information to the public that COVID-19 vaccination for children is safe and effective.
RESUMEN
Efficient and cost-effective biosorbents derived from biowaste are highly demanding to handle various environmental challenges, and demonstrate the remarkable synergy between sustainability and innovation. In this study, the extraction of uranium U(VI) was investigated on biowaste activated carbon (BAC) obtained by chemical activation (phosphoric acid) using Albizia Lebbeck pods as biowaste. The biowaste powder (BP), biowaste charcoal (BC) and BAC were evaluated by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) and Brunauer-Emmett-Teller (BET) with nitrogen adsorption for thermal properties, chemical structures, porosity and surface area, respectively. The pHPZC for acidic or basic nature of the surface and X-ray diffraction (XRD) analysis were performed for BAC. The morphological and elemental analysis were performed by scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). The extraction of uranium U(VI) ions from aqueous solutions using BAC as sorbent was investigated by using different variables such as pH, contact time, initial uranium U(VI) concentration and BAC dose. The highest adsorption (90.60% was achieved at 0.5 g BAC dose, 2 h contact time, pH 6, 10 ppm initial U(VI) concentration and with 200 rpm shaking speeds. The production of this efficient adsorbent from biowaste could be a potential step forward in adsorption of uranium to meet the high demand of uranium for nuclear energy applications.
RESUMEN
The neurodegenerative condition known as Parkinson's disease (PD) is brought on by the depletion of dopaminergic neurons in the basal ganglia, which is the brain region that controls body movement. PD occurs due to many factors, from which one of the acknowledged effects of oxidative stress is pathogenic pathways that play a role in the development of Parkinson's disease. Antioxidants, including flavonoids, vitamins E and C, and polyphenolic substances, help to reduce the oxidative stress brought on by free radicals. Consequently, this lowers the risk of neurodegenerative disorders in the long term. Although there is currently no cure for neurodegenerative illnesses, these conditions can be controlled. The treatment of this disease lessens its symptoms, which helps to preserve the patient's quality of life. Therefore, the use of naturally occurring antioxidants, such as polyphenols, which may be obtained through food or nutritional supplements and have a variety of positive effects, has emerged as an appealing alternative management strategy. This article will examine the extent of knowledge about antioxidants in the treatment of neurodegenerative illnesses, as well as future directions for research. Additionally, an evaluation of the value of antioxidants as neuroprotective agents will be provided.
RESUMEN
Mitigating the effects of environmental deterioration requires a focus on not just CO2 emissions from energy consumption, but also environmental pollution from industry sectors. To reach this goal, recent studies have extended ecological footprint (EF) analysis to identify the ecological drivers of various key industry sectors. The role of the phosphorus (P) industry on the EF within the environmental Kuznets curve (EKC) framework for China is the emphasis of this study. Autoregressive distributive lag (ARDL) as well as the impulse response function and robustness analysis were used to consider a time from 1985 to 2018. The study verifies the EKC hypothesis for China in both the long and the short run, and indispensable determinants are proposed to be included to assure the model's fitness and robustness when conducting EF analysis of industry sectors. Energy consumption-based carbon emissions have been verified as the dominant contributor to EF, but P use and urbanization have a significant lagged positive influence on EF in the short run. P exports, in particular, have been highlighted as a critical driver of the EF of China's P industry. The conducted frequency domain causality test reinforced the above findings and demonstrated bidirectional causality at different frequencies. This work suggests that formulating plausible P export policies to alleviate the conflict between the output of China's P industry and the environmental sustainability of this industry are necessary. In this context, "multidisciplinary, multidimensional, and practical solutions" are most desirable for sustainable P management.
Asunto(s)
Dióxido de Carbono , Desarrollo Económico , Carbono , Dióxido de Carbono/análisis , China , FósforoRESUMEN
The surface plasmon resonance in low-dimensional semiconducting materials is a source of valuable scientific phenomenon which opens widespread prospects for novel applications. A systematic study to shed light on the propagation of plasmons at the interface of GaN nanowire is reported. A comprehensive analysis of the interaction of light with GaN nanowires and the propagation of plasmons is carried out to uncover further potentials of the material. The results obtained on the basis of calculations designate the interaction of light with nanowires, which produced plasmons at the interface that propagate along the designed geometry starting from the center of the nanowire towards its periphery, having more flux density at the center of the nanowire. The wavelength of light does not affect the propagation of plasmons but the flux density of plasmons appeared to increase with the wavelength. Similarly, an increment in the flux density of plasmons occurs even in the case of coupled and uncoupled nanowires with wavelength, but more increment occurs in the case of coupling. Further, it was found that an increase in the number of nanowires increases the flux density of plasmons at all wavelengths irrespective of uniformity in the propagation of plasmons. The findings point to the possibility of tuning the plasmonics by using a suitable number of coupled nanowires in assembly.
RESUMEN
Methods enabling rapid and on-site detection of pathogenic bacteria are a prerequisite for public health assurance, medical diagnostics, ensuring food safety and security, and research. Many current bacteria detection technologies are inconvenient and time-consuming, making them unsuitable for field detection. New technology based on the CRISPR/Cas system has the potential to fill the existing gaps in detection. The clustered regularly interspaced short palindromic repeats (CRISPR) system is a part of the bacterial adaptive immune system to protect them from intruding bacteriophages. The immunological memory is saved by the CRISPR array of bacteria in the form of short DNA sequences (spacers) from invading viruses and incorporated with the CRISPR DNA repeats. Cas proteins are responsible for triggering and initiating the adaptive immune function of CRISPR/Cas systems. In advanced biological research, the CRISPR/Cas system has emerged as a significant tool from genome editing to pathogen detection. By considering its sensitivity and specificity, this system can become one of the leading detection methods for targeting DNA/RNA. This technique is well applied in virus detection like Dengue, ZIKA, SARS-CoV-2, etc., but for bacterial detection, this CRISPR/Cas system is limited to only a few organisms to date. In this review, we have discussed the different techniques based on the CRISPR/Cas system that have been developed for the detection of various pathogenic bacteria like L. monocytogenes, M. tuberculosis, Methicillin-resistant S. aureus, Salmonella, E. coli, P. aeruginosa, and A. baumannii.