Furanosesquiterpenes and Related Natural Products from Myoporum Species: Isolation and Semisynthesis.

Myoporum species are recognized as toxic plants. Essential oils from the leaves of these species contain furanosesquiterpenes, which comprise the active toxins. In this report, natural products isolation studies of three Myoporum species (M. insulare, M. parvifolium, and M. montanum) afforded two previously unreported furanosesquiterpenes (24 and 25) and three unprecedented γ-lactone-containing analogues (26-28), along with nine previously reported furanosesquiterpenes and five other natural products. Among the 14 furanosesquiterpenes and related compounds isolated in this study, we observed three distinct types of furanosesquiterpene structures isolated from each of these Myoporum species. Semisyntheses of four sesquiterpene natural products were completed from (-)-ngaione over two steps in each case. This included the synthesis of the lactam-containing sesquiterpene myoporumine A.

Arbutin Derivatives Isolated from Ancient Proteaceae: Potential Phytochemical Markers Present in Bellendena, Cenarrhenes, and Persoonia Genera.

Extensive phytochemical studies of the paleoendemic Tasmanian Proteaceae species Bellendena montana, Cenarrhenes nitida, and Persoonia gunnii were conducted employing pressurized hot water extraction. As part of these studies, six novel glycosides were isolated, including rare examples of glycoside-containing natural products featuring tiglic acid esters. These polar molecules may represent potential phytochemical markers in ancient Proteaceae.

3D Printed Micrometer-Scale Polymer Mounts for Single Crystal Analysis.

3D printed micrometer-scale polymer mounts for single crystal analysis have been prepared by photopolymerization using digital light projection stereolithography (DLP-SLA), with a commercially available digital light projection stereolithography printer (US$4000) and 3DM-ABS resin (US$150 per liter). The polymer mounts were prepared in batches of 49 in 1 h 15 min, which allowed for rapid prototyping and testing of new crystal mounting designs, with a resin cost of 0.2¢ US per mount. The suitability of the 3D printed mounts for single crystal crystallography has been demonstrated through their use in Cu Kα X-ray diffraction experiments of Rochelle salt (sodium potassium tartrate), the protein lysozyme, and has been employed for routine crystallographic analysis of organic and inorganic materials.

ent-Labdane Diterpenoids from Dodonaea viscosa.

Seven new and two known ent-labdane diterpenoids have been isolated from a single plant specimen of Dodonaea viscosa ssp. spatulata, found in Tasmania, Australia. Prior to this study, only seven different labdane diterpenoids had been isolated from D. viscosa. The structures of the natural products were assigned via 1D and 2D NMR spectroscopy and other standard spectroscopic methods. The absolute configuration of three ent-labdane diterpenoids was determined by single-crystal X-ray crystallography of synthetic derivatives. Significantly, the results of this study suggest that the absolute configuration of some known labdane diterpenoids may have been misassigned.

Chloride-Anion-Templated Synthesis of a Strapped-Porphyrin-Containing Catenane Host System.

The synthesis, structure and anion-recognition properties of a new strapped-porphyrin-containing [2]catenane anion host system are described. The assembly of the catenane is directed by discrete chloride anion templation acting in synergy with secondary aromatic donor-acceptor and coordinative pyridine-zinc interactions. The [2]catenane incorporates a three-dimensional, hydrogen-bond-donating anion-binding pocket; solid-state structural analysis of the catenane⋅chloride complex reveals that the chloride anion is encapsulated within the catenane's interlocked binding cavity through six convergent CH⋅⋅⋅⋅Cl and NH⋅⋅⋅Cl hydrogen-bonding interactions and solution-phase (1) H NMR titration experiments demonstrate that this complementary hydrogen-bonding arrangement facilitates the selective recognition of chloride over larger halide anions in DMSO solution.

Reversible luminescence switching of a redox-active ferrocene-europium dyad.

The copper-catalyzed cycloaddition reaction between a propargyl-appended europium complex and azidomethylferrocene yields a d-f dyad whose photophysical properties can be reversibly switched by varying the oxidation state of the ferrocene chromophore.

Porphyrin-based colorimetric sensing of perfluorooctanoic acid as proof of concept for perfluoroalkyl substance detection.

A functionalized porphyrin receptor was prepared to bind perfluorooctanoic acid. UV-Vis spectroscopic analysis showed the receptor gave a rapid colorimetric response that could also be detected visually at environmentally relevant concentrations. Spiked soil samples were used to demonstrate detection of perfluorooctanoic acid without intensive sample pre-treatment or laboratory instrument analysis.

Enhancement of anion recognition exhibited by a halogen-bonding rotaxane host system.

We report the first use of solution-phase halogen bonding to control and facilitate the assembly of an interlocked structure through the bromide anion-templated formation of a rotaxane based upon an iodotriazolium axle. The incorporation of a halogen atom into the rotaxane host cavity dramatically improves the anion-recognition capabilities of the interlocked receptor, giving unusual iodide selectivity in a competitive aqueous medium.

Rotaxanes capable of recognising chloride in aqueous media.

A new, versatile chloride-anion-templating synthetic pathway is exploited for the preparation of a series of eight new [2]rotaxane host molecules, including the first sulfonamide interlocked system. (1)H NMR spectroscopic titration investigations demonstrate the rotaxanes' capability to selectively recognise the chloride anion in competitive aqueous solvent media. The interlocked host's halide binding affinity can be further enhanced and tuned through the attachment of electron-withdrawing substituents and by increasing its positive charge. A dicationic rotaxane selectively binds chloride in 35% water, wherein no evidence of oxoanion binding is observed. NMR spectroscopy, X-ray structural analysis and computational molecular dynamics simulations are used to account for rotaxane formation yields, anion binding strengths and selectivity trends.

Distinct Drimane Chemotypes in Tasmanian Mountain Pepper (Tasmannia lanceolata): Differences in the Profiles of Pungent Leaf Phytochemicals Associated with Altitudinal Cline.

This study assesses whether the distinct altitudinal cline in leaf morphology (decreased leaf width and length with increased altitude) in Tasmanian mountain pepper (Tasmannia lanceolata) is associated with changes in the leaf chemistry of wild populations from different ecological landscapes and altitudes. The presence of distinct pungent drimane sesquiterpenoid chemotypes was identified: subalpine woodland and wet sclerophyll forest chemotypes. Isolation studies and analysis of extracts revealed that wet sclerophyll forest T. lanceolata populations featured polygodial as the principal terpenoid, with profiles similar to the commercial cultivars sampled. In contrast, the subalpine woodland populations contained the drimane sesquiterpenoids 1ß-acetoxy-9-deoxyisomuzigadial and 3ß-acetoxydrimenin and the conspicuous absence of the pungent principle polygodial.

Asymmetric synthesis of bis(tertiary arsines): highly stereoselective alkylations of diastereomers of a chiral phosphine-stabilized bis(arsenium triflate).

The addition of organolithium reagents to an equilibrating mixture of diastereomers of a phosphine-stabilized 1,2-ethanediylbis(phenylarsenium triflate) containing chiral arsenic stereocenters and an enantiomerically pure, atropisomeric tertiary phosphepine derived from lithiated (aR)-2,2'-dimethyl-1,1'-binaphthalene generates unequal mixtures of diastereomers and enantiomers of chelating 1,2-ethanediylbis(tertiary arsines), chiral at arsenic, with liberation of the (aR(P))-phosphepine. Thus, the addition of methyllithium in diethyl ether at -95 degrees C to a dichloromethane solution of the complex (R*(As),R*(As))-(+/-)/(R*(As),S*(As))-1,2-[(R(3)P)PhAsCH(2)CH(2)AsPh(PR(3))](OTf)(2), where R(3)P is (aR(P))-[2-(methoxymethyl)phenyl]phosphepine, generates (R*(As),R*(As))-(+/-)-1,2-ethanediylbis(methylphenylarsine) in 78% diastereoselectivity and 95% enantioselectivity in favor of the (R(As),R(As)) enantiomer. Under similar conditions, the addition of n-butyllithium in hexanes to a solution of the bis(phosphepine-stabilized)-diarsenium triflate at -95 degrees C gives the corresponding (R*(As),R*(As))-(+/-)-1,2-ethanediylbis[(n-butyl)phenylarsine) in 77% diastereoselectivity and 93% enantioselectivity in favor of the (R(As),R(As)) enantiomer.

Self-assembly of square-planar halide complexes of phosphine-stabilised stibenium salts.

Chloride and bromide ions direct the self-assembly of supramolecular square-planar halide complexes in which four trimethylphosphine-stabilised diphenylstibenium ions surround the central halide ion in discrete centrosymmetrical structures of C(4h) symmetry.

A new synthetic route to chloride selective [2]catenanes.

A novel anion templation route has been developed to synthesise two new catenanes, which are observed to selectively complex chloride in protic solvent media.

Tertiary arsine-stabilised arsenium salts: syntheses and comparisons with phosphine analogues.

The first tertiary arsine-stabilised arsenium salts, [(L)AsMePh]OTf (L = Ph3As, Me2PhAs, [2-(MeOCH2)C6H4]Ph2As, [2-(MeOCH2)C6H4]Me2As), have been prepared by chloride abstraction from chloromethylphenylarsine with trimethylsilyl triflate in the presence of the arsine. The complexes have been characterised by crystallography and 1H NMR spectroscopy. The chiral cations in the complexes have structures based on the trigonal pyramid in which the arsine is coordinated orthogonally to the prochiral, six-electron MePhAs+ ion that forms the base of the pyramid. The NMR data for the complexes in dichloromethane-d2 are consistent with rapid exchange of the arsine on the arsenium ion, even at 183 K. The corresponding phosphine-stabilised complexes are considerably more stable than their arsine counterparts in dichloromethane-d2 with the free energy of activation DeltaG = ca. 60 kJ mol(-1) being calculated for phosphine exchange in [(Me2PhP)AsMePh]OTf at 281 K; for [(Me2[2-(MeOCH2)C6H4]P)AsMePh]OTf in the same solvent, DeltaG = ca. 70 kJ mol(-1) at 323 K.

Asymmetric transformation of a double-stranded, dicopper(I) helicate containing achiral bis(bidentate) Schiff bases.

Reactions of the bis(bidentate) Schiff-bases N,N'-bis(6-alkyl-2-pyridylmethylene)ethane-1,2-diamine (where alkyl = H, Me, iPr) (L) with tetrakis(acetonitrile)copper(I) hexafluorophosphate and silver(I) hexafluorophosphate afforded, respectively, the double-stranded, dinuclear metal helicates [T-4-(R,R)]-(+/-)-[M2L2](PF6)2 (M = Cu, Ag). The helicates were characterized by 1H and 13C NMR spectroscopy, conductivity, microanalysis, and single-crystal X-ray structure determinations on selected compounds. Intermolecular ligand exchange and intramolecular inversion rates for the complexes were investigated by 1H NMR spectroscopy. Reversible intermolecular ligand exchange between two differently substituted helicates followed first-order kinetics. The rate constants (k) and corresponding half-lives (t(1/2)) for ligand exchange for the dicopper(I) helicates were k = (1.6-1.8) x 10(-6) s(-1) (t(1/2) = 110-120 h) in acetone-d6, k = 4.9 x 10(-6) s(-1) (t(1/2) = 40 h) in dichloromethane-d2, and k > 2 x 10(-3) s(-1) (t(1/2) < 5 min) in acetonitrile-d3. Ligand exchange for the disilver(I) helicates occurred with k > 2 x 10(-3) s(-1) (t(1/2) < 5 min). Racemization of the dicopper(I) helicate by an intramolecular mechanism was investigated by determination of the coalescence temperature for the diastereotopic isopropyl-Me groups in the appropriate complex, and DeltaG() >> 76 kJ mol(-1) was calculated for the process in acetone-d6, nitromethane-d3, and dichloromethane-d2 with DeltaG() = 75 kJ mol(-1) in acetonitrile-d3. Complete anion exchange of the hexafluorophosphate salt of a dicopper(I) helicate with the enantiomerically pure Delta-(-)-tris(catecholato)arsenate(V) ([As(cat)3]-) in the presence of Dabco gave the two diastereomers (R,R)-[Cu2L2][Delta-(-)-[As(cat)3]]2 and (S,S)-[Cu2L2][Delta-(-)-[As(cat)3]]2 in up to 54% diastereomeric excess, as determined by (1)H NMR spectroscopy. The diastereomerically and enantiomerically pure salt (R,R)-[Cu(2)L2][Delta-(-)-[As(cat)3]]2 crystallized from the solution in a typical second-order asymmetric transformation. The asymmetric transformation of the dicopper(I) helicate is the first synthesis of a diastereomerically and enantiomerically pure dicopper(I) helicate containing achiral ligands.

Cyanocobalt(III) complexes of penta- and tetradentate-coordinated macrocyclic hexaamines.

The pendent-arm macrocyclic hexaamine trans-6,13-dimethyl-1,4,8,11-tetraazacyclotetradecane-6,13-diamine (L) may coordinate in tetra-, penta- or hexadentate modes, depending on the metal ion and the synthetic procedure. We report here the crystal structures of two pseudo-octahedral cobalt(III) complexes of L, namely sodium trans-cyano(trans-6,13-dimethyl-1,4,8,11-tetraazacyclotetradecane-6,13-diamine)cobalt(III) triperchlorate, Na[Co(CN)(C13H30N6)](ClO4)3 or Na{trans-[CoL(CN)]}(ClO4)3, (I), where L is coordinated as a pentadentate ligand, and trans-dicyano(trans-6,13-dimethyl-1,4,8,11-tetraazacyclotetradecane-6,13-diamine)cobalt(III) trans-dicyano(trans-6,13-dimethyl-1,4,8,11-tetraazacyclotetradecane-6,13-diaminium)cobalt(III) tetraperchlorate tetrahydrate, [Co(CN)2(C14H32N6)][Co(CN)2(C14H30N6)](ClO4)4.4H2O or trans-[CoL(CN)2]trans-[Co(H2L)(CN)2](ClO4)4.4H2O, (II), where the ligand binds in a tetradentate mode, with the remaining coordination sites being filled by C-bound cyano ligands. In (I), the secondary amine Co-N bond lengths lie within the range 1.944 (3)-1.969 (3) A, while the trans influence of the cyano ligand lengthens the Co-N bond length of the coordinated primary amine [Co-N = 1.986 (3) A]. The Co-CN bond length is 1.899 (3) A. The complex cations in (II) are each located on centres of symmetry. The Co-N bond lengths in both cations are somewhat longer than in (I) and span a narrow range [1.972 (3)-1.982 (3) A]. The two independent Co-CN bond lengths are similar [1.918 (4) and 1.926 (4) A] but significantly longer than in the structure of (I), again a consequence of the trans influence of each cyano ligand.

Immobilisation of electroactive macrocyclic complexes within titania films.

The 4-carboxyphenyl-appended macrocyclic ligand trans-6,13-dimethyl-6-((4-carboxybenzyl)amino)-1,4,8,11-tetraazacyclotetradecane-6-amine (HL10) has been synthesised and complexed with Co(III). The mononuclear complexes [Co(HL10)(CN)]2+ and [CoL10(OH)]+ have been prepared and the crystal structures of their perchlorate salts are presented, where the ligand is bound in a pentadentate mode in each case while the 4-carboxybenzyl-substituted pendent amine remains free from the metal. The cyano-bridged dinuclear complex [CoL10-mu-NC-Fe(CN)5]2- was also prepared and chemisorbed on titania-coated ITO conducting glass. The adsorbed complex is electrochemically active and cyclic voltammetry of the modified ITO working electrode in both water and MeCN solution was undertaken with simultaneous optical spectroscopy. This experiment demonstrates that reversible electrochemical oxidation of the Fe(II) centre is coupled with rapid changes in the optical absorbance of the film.