Genetic and biochemical approaches to spindle function and chromosome segregation in eukaryotic microorganisms.

The past year saw the molecular characterization of components of the Saccharomyces cerevisiae kinetochore and spindle pole body. In Schizosaccharomyces pombe, new cytological methods have been described for detection of centromeric DNA by light microscopy and probable kinetochores by electron microscopy.

Spindle pole body duplication: a model for centrosome duplication?

The yeast spindle pole body (SPB) is the functional equivalent of the centrosome and forms the two poles of the mitotic spindle. Before mitosis, both SPBs and centrosomes are present as single copies and must be duplicated to form the bipolar spindle. SPB components have been identified using a combination of biochemistry and genetics, and their role during SPB duplication has been analysed using temperature-sensitive mutants. In this article, we describe structural aspects of SPB duplication and their possible relationship to centrosome duplication.

Localization of core spindle pole body (SPB) components during SPB duplication in Saccharomyces cerevisiae.

We have examined the process of spindle pole body (SPB) duplication in Saccharomyces cerevisiae by electron microscopy and found several stages. These include the assembly, probably from the satellite, of a large plaque-like structure, the duplication plaque, on the cytoplasmic face of the half-bridge and its insertion into the nuclear envelope. We analyzed the role of the main SPB components in the formation of these structures by identifying them from an SPB core fraction by mass spectrometry. Temperature-sensitive mutants for two of the components, Spc29p and Nud1p, were prepared to partly define their function. The composition of two of the intermediates in SPB duplication, the satellite and the duplication plaque, was examined by immunoelectron microscopy. Both contain cytoplasmic SPB components showing that duplication has already been partly achieved by the end of the preceding cell cycle when the satellite is formed. We show that by overexpression of SPB components the structure of the satellite can be changed and SPB duplication inhibited by disrupting the attachment of the plaque-like intermediate to the half-bridge. We present a model for SPB duplication where binding of SPB components to either end of the bridge structure ensures two separate SPBs.

NDC10: a gene involved in chromosome segregation in Saccharomyces cerevisiae.

A mutant, ndc10-1, was isolated by anti-tubulin staining of temperature-sensitive mutant banks of budding yeast. ndc10-1 has a defect chromosome segregation since chromosomes remains at one pole of the anaphase spindle. This produces one polyploid cell and one aploid cell, each containing a spindle pole body (SPD. NDC10 was cloned and sequenced and is identical to CBF2 (Jiang, W., J. Lechnermn and J. Carbon. 1993. J. Cell Biol. 121:513) which is the 110-kD component of a centromere DNA binding complex (Lechner, J., and J. Carbon. 1991. Cell. 61:717-725). NDC10 is an essential gene. Antibodies to Ndc10p labeled the SPB region in nearly all the cells examined including nonmitotic cells. In some cells with short spindles which may be in metaphase, staining was also observed along the spindle. The staining pattern and the phenotype of ndc10-1 are consistent with Cbf2p/Ndc10p being a kinetochore protein, and provide in vivo evidence for its role in the attachment of chromosomes to the spindle.

The Ndc80p complex from Saccharomyces cerevisiae contains conserved centromere components and has a function in chromosome segregation.

We have purified a complex from Saccharomyces cerevisiae containing the spindle components Ndc80p, Nuf2p, Spc25p, and Spc24p. Temperature-sensitive mutants in NDC80, SPC25, and SPC24 show defects in chromosome segregation. In spc24-1 cells, green fluorescence protein (GFP)-labeled centromeres fail to split during spindle elongation, and in addition some centromeres may detach from the spindle. Chromatin immunoprecipitation assays show an association of all four components of the complex with the yeast centromere. Homologues of Ndc80p, Nuf2p, and Spc24p were found in Schizosaccharomyces pombe and GFP tagging showed they were located at the centromere. A human homologue of Nuf2p was identified in the expressed sequence tag database. Immunofluorescent staining with anti-human Nuf2p and with anti-HEC, the human homologue of Ndc80p, showed that both proteins are at the centromeres of mitotic HeLa cells. Thus the Ndc80p complex contains centromere-associated components conserved between yeasts and vertebrates.

Spc42p: a phosphorylated component of the S. cerevisiae spindle pole body (SPD) with an essential function during SPB duplication.

The 42-kD component of the S. cerevisiae spindle pole body (SPB) localizes to the electron-dense central plaque of the SPB. We have cloned the corresponding gene SPC42 (spindle pole component) and show that it is essential. Seven temperature-sensitive (ts) mutants in SPC42 were prepared by error-prone PCR. We found that a change to a proline residue in a potential coiled-coil region of Spc42p was responsible for the ts phenotype in at least three alleles, suggesting that formation of the coiled-coil is essential in normal function. The mutant cells showed a phenotype of predominantly single or bilobed SPBs often with an accumulation of unstructured electron-dense material associated with the bridge structure adjacent to the SPB. This phenotype suggests a defect in SPB duplication. This was confirmed by examining synchronized mutant cells that lose viability when SPB duplication is attempted. Spc42p is a phosphoprotein which shows some cell cycle-regulated phosphorylation. Overexpression of Spc42p causes the formation of a disc- or dome-shaped polymer composed of phosphorylated Spc42p, which is attached to the central plaque and associated with the outer nuclear membrane. Taken together, these data suggest that Spc42p forms a polymeric layer at the periphery of the SPB central plaque which has an essential function during SPB duplication and may facilitate attachment of the SPB to the nuclear membrane.

Rat monoclonal antitubulin antibodies derived by using a new nonsecreting rat cell line.

Hybrid myeloma cell lines secreting monoclonal antibodies to tubulin have been prepared using rat myelomas and spleen cells from rats immunized with yeast tubulin. A comparison between the results obtained with the rat myeloma Y3-Ag 1.2.3., which secretes a light chain, and a new line, YB2/O, which does not, shows that they are both excellent parental lines and that the second produces hybrids with no myeloma chain components. The antitubulin antibodies in the serum of rats bearing two of the hybrid myeloma tumors gave titers of up to 1:10(6) from which large amounts of monoclonal antibodies could be easily purified. They recognized tubulin from yeast as well as from birds and mammals. The two antibodies gave clear immunofluorescent staining of yeast mitotic spindles as well as the interphase microtubule network of tissue culture cells. Some difference in the pattern of immunofluorescence staining of yeast cells and nuclei was observed between the two antibodies. The purified antibodies could be conjugated to colloidal gold particles and used for direct labeling of yeast microtubules for electron microscopy.

Components of the yeast spindle and spindle pole body.

Yeast spindle pole bodies (SPBs) with attached nuclear microtubles were enriched approximately 600-fold from yeast cell extracts. 14 mAbs prepared against this enriched SPB fraction define at least three components of the SPB and spindle. Immunofluorescent staining of yeast cells showed that throughout the cell cycle two of the components (110 and 90 kD) were localized exclusively to the SPB region, and the other (80 kD) was localized both to the SPB region and to particulate dots in short spindles. Immunoelectron microscopy confirmed and extended most of these findings. Thus the 110-kD component was localized to a layer in the SPB just to the nuclear side of the plane of the inner nuclear membrane. The 90-kD component was localized in a layer across the cytoplasmic face of intact SPBs, and, in SPBs where nuclear microtubules were removed by extraction with DEAE-dextran, the 90-kD component was also found in an inner nuclear layer close to where spindle microtubules emerge. In intact SPBs with attached nuclear microtubules the anit-80-kD mAb labels microtubules, particularly those close to the SPB. These results begin to provide a preliminary molecular map of the SPB and should also enable the corresponding genes to be isolated.

Structural rearrangements of tubulin and actin during the cell cycle of the yeast Saccharomyces.

The distribution of actin and tubulin during the cell cycle of the budding yeast Saccharomyces was mapped by immunofluorescence using fixed cells from which the walls had been removed by digestion. The intranuclear mitotic spindle was shown clearly by staining with a monoclonal antitubulin; the presence of extensive bundles of cytoplasmic microtubules is reported. In cells containing short spindles still entirely within the mother cells, one of the bundles of cytoplasmic microtubules nearly always extended to (or into) the bud. Two independent reagents (anti-yeast actin and fluorescent phalloidin) revealed an unusual distribution of actin: it was present as a set of cortical dots or patches and also as distinct fibers that were presumably bundles of actin filaments. Double labeling showed that at no stage in the cell cycle do the distributions of actin and tubulin coincide for any significant length, and, in particular, that the mitotic spindle did not stain detectably for actin. However, both microtubule and actin staining patterns change in a characteristic way during the cell cycle. In particular, the actin dots clustered in rings about the bases of very small buds and at the sites on unbudded cells at which bud emergence was apparently imminent. Later in the budding cycle, the actin dots were present largely in the buds and, in many strains, primarily at the tips of these buds. At about the time of cytokinesis the actin dots clustered in the neck region between the separating cells. These aspects of actin distribution suggest that it may have a role in the localized deposition of new cell wall material.

A spacer protein in the Saccharomyces cerevisiae spindle poly body whose transcript is cell cycle-regulated.

Monoclonal antibodies against the 110-kD component of the yeast spindle pole body (SPB) were used to clone the corresponding gene SPC110. SPC110 is identical to NUF1 (Mirzayan, C., C. S. Copeland, and M. Synder. 1992. J. Cell Biol. 116:1319-1332). SPC110/NUF1 has an MluI cell cycle box consensus sequence in its putative promoter region, and we found that the transcript was cell cycle regulated in a similar way to other MluI-regulated transcripts. Spc110p/Nuflp has a long central region with a predicted coiled-coil structure. We expressed this region in Escherichia coli and showed by rotary shadowing that rods of the predicted length were present. The 110-kD component is localized in the SPB to the gap between the central plaque and the sealed ends of the nuclear microtubules near the inner plaque (Rout, M., and J. V. Kilmartin. 1990. J. Cell Biol. 111:1913-1927). We found that rodlike structures bridge this gap. When truncations of SPC110 with deletions in the coiled-coil region of the protein replaced the wild-type gene, the gap between the central plaque and the ends of the microtubules decreased in proportion to the size of the deletion. This suggests that Spc110p connects these two parts of the SPB together and that the coiled-coil domain acts as a spacer element.

Analysis of the Saccharomyces spindle pole by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry.

A highly enriched spindle pole preparation was prepared from budding yeast and fractionated by SDS gel electrophoresis. Forty-five of the gel bands that appeared enriched in this fraction were analyzed by high-mass accuracy matrix-assisted laser desorption/ ionization (MALDI) peptide mass mapping combined with sequence database searching. This identified twelve of the known spindle pole components and an additional eleven gene products that had not previously been localized to the spindle pole. Immunoelectron microscopy localized eight of these components to different parts of the spindle. One of the gene products, Ndc80p, shows homology to human HEC protein (Chen, Y., D.J. Riley, P-L. Chen, and W-H. Lee. 1997. Mol. Cell Biol. 17:6049-6056) and temperature-sensitive mutants show defects in chromosome segregation. This is the first report of the identification of the components of a large cellular organelle by MALDI peptide mapping alone.

Saccharomyces cerevisiae cells with defective spindle pole body outer plaques accomplish nuclear migration via half-bridge-organized microtubules.

Cnm67p, a novel yeast protein, localizes to the microtubule organizing center, the spindle pole body (SPB). Deletion of CNM67 (YNL225c) frequently results in spindle misorientation and impaired nuclear migration, leading to the generation of bi- and multinucleated cells (40%). Electron microscopy indicated that CNM67 is required for proper formation of the SPB outer plaque, a structure that nucleates cytoplasmic (astral) microtubules. Interestingly, cytoplasmic microtubules that are essential for spindle orientation and nuclear migration are still present in cnm67Delta1 cells that lack a detectable outer plaque. These microtubules are attached to the SPB half- bridge throughout the cell cycle. This interaction presumably allows for low-efficiency nuclear migration and thus provides a rescue mechanism in the absence of a functional outer plaque. Although CNM67 is not strictly required for mitosis, it is essential for sporulation. Time-lapse microscopy of cnm67Delta1 cells with green fluorescent protein (GFP)-labeled nuclei indicated that CNM67 is dispensable for nuclear migration (congression) and nuclear fusion during conjugation. This is in agreement with previous data, indicating that cytoplasmic microtubules are organized by the half-bridge during mating.

Hemoglobin Cochin-Port-Royal: consequences of the replacement of the beta chain C-terminal by an arginine.

Hemoglobin Cochin Port-Royal beta 146 (HC3) His yields Arg is the second example in which the beta C-terminal residue is replaced. Owing to the known importance of His beta 146 in the co-operative effects of hemoglobin, the functional properties of this variant were carefully studied. It had a normal Hill coefficient but a reduced alkaline Bohr effect. However, the reduction in Bohr effect is less than the halving predicted from previous mutants and modified hemoglobins.

Role of Bohr group salt bridges in cooperativity in hemoglobin.

Possible problems in measuring the first Adair constant, K1, from accurate oxygen equilibrium curves have been investigated. Of these only the presence of small amounts of CO-hemoglobin or hemoglobin dimers had a significant effect. The former can be eliminated by treatment with oxygen, the latter by measuring the concentration-dependence of K1 or working at high protein concentrations. K1 values have been measured for normal hemoglobin at pH 7 and 9, hemoglobin specifically reacted with cyanate at Val 1alpha (alphac2beta2) and des(His 146beta) hemoglobin at pH 7. K1 is equal to KT, the oxygen affinity of the T state of hemoglobin, for all these hemoglobins and was increased in all of them when compared to normal hemoglobin at pH 7. This shows that the breakage of the Bohr group salt bridges by increasing pH or specific modification changes KT. Hence the Bohr group salt bridges break on ligation of the T state and are partially responsible for the free energy of cooperativity.