Vertical full-colour micro-LEDs via 2D materials-based layer transfer.

Micro-LEDs (µLEDs) have been explored for augmented and virtual reality display applications that require extremely high pixels per inch and luminance1,2. However, conventional manufacturing processes based on the lateral assembly of red, green and blue (RGB) µLEDs have limitations in enhancing pixel density3-6. Recent demonstrations of vertical µLED displays have attempted to address this issue by stacking freestanding RGB LED membranes and fabricating top-down7-14, but minimization of the lateral dimensions of stacked µLEDs has been difficult. Here we report full-colour, vertically stacked µLEDs that achieve, to our knowledge, the highest array density (5,100 pixels per inch) and the smallest size (4 µm) reported to date. This is enabled by a two-dimensional materials-based layer transfer technique15-18 that allows the growth of RGB LEDs of near-submicron thickness on two-dimensional material-coated substrates via remote or van der Waals epitaxy, mechanical release and stacking of LEDs, followed by top-down fabrication. The smallest-ever stack height of around 9 µm is the key enabler for record high µLED array density. We also demonstrate vertical integration of blue µLEDs with silicon membrane transistors for active matrix operation. These results establish routes to creating full-colour µLED displays for augmented and virtual reality, while also offering a generalizable platform for broader classes of three-dimensional integrated devices.

Remote Epitaxy: Fundamentals, Challenges, and Opportunities.

Advanced heterogeneous integration technologies are pivotal for next-generation electronics. Single-crystalline materials are one of the key building blocks for heterogeneous integration, although it is challenging to produce and integrate these materials. Remote epitaxy is recently introduced as a solution for growing single-crystalline thin films that can be exfoliated from host wafers and then transferred onto foreign platforms. This technology has quickly gained attention, as it can be applied to a wide variety of materials and can realize new functionalities and novel application platforms. Nevertheless, remote epitaxy is a delicate process, and thus, successful execution of remote epitaxy is often challenging. Here, we elucidate the mechanisms of remote epitaxy, summarize recent breakthroughs, and discuss the challenges and solutions in the remote epitaxy of various material systems. We also provide a vision for the future of remote epitaxy for studying fundamental materials science, as well as for functional applications.

Combined use of fractional exhaled nitric oxide and bronchodilator response in predicting future loss of asthma control among children with atopic asthma.

BACKGROUND AND OBJECTIVE: Recognition of patients at risk of asthma exacerbation is important for future asthma care and improved outcome. The aim of the present study was to see whether measurements of bronchodilator response (BDR) and fractional exhaled nitric oxide (FeNO) in combination provide prognostic information superior to either measurement alone in children with atopic asthma. METHODS: A total of 201 atopic children aged 8-16 years with intermittent or mild persistent asthma were included. Pulmonary function tests including BDR and FeNO were serially monitored 10 times or more over 2 years when subjects were not receiving controller medications. After completion of monitoring, 1-year observation for a loss of asthma control was performed. RESULTS: During the monitoring period, positive BDRs (≥12% in forced expiratory volume in 1 s (FEV1 ) from pre-bronchodilator value) and FeNO higher than 35 parts per billion (ppb) were observed at least once in 59% and 77% of participants. When analysed as continuous variables, both BDR (hazard ratio (HR): 1.21; 95% CI: 1.04-1.41; P = 0.014) and FeNO (HR: 1.27; 95% CI: 1.09-1.49; P = 0.003) were associated with increased risks for a control loss. Compared with patients showing either positive BDRs (HR: 3.19; 95% CI: 1.05-9.64) or FeNO higher than 35 ppb (HR: 4.70; 95% CI: 1.68-13.11), patients with both findings (HR: 7.08; 95% CI: 2.57-19.49) had greater risks for a control loss. CONCLUSION: These data support that combined use of BDR and FeNO measurements can modify predictive risk obtained from either measurement alone.

Ultrahigh Photoresponsivity of W/Graphene/ß-Ga2O3 Schottky Barrier Deep Ultraviolet Photodiodes.

The integration of graphene with semiconductor materials has been studied for developing advanced electronic and optoelectronic devices. Here, we propose ultrahigh photoresponsivity of ß-Ga2O3 photodiodes with a graphene monolayer inserted in a W Schottky contact. After inserting the graphene monolayer, we found a reduction in the leakage current and ideality factor. The Schottky barrier height was also shown to be about 0.53 eV, which is close to an ideal value. This was attributed to a decrease in the interfacial state density and the strong suppression of metal Fermi-level pinning. Based on a W/graphene/ß-Ga2O3 structure, the responsivity and external quantum efficiency reached 14.49 A/W and 7044%, respectively. These values were over 100 times greater than those of the W contact alone. The rise and delay times of the W/graphene/ß-Ga2O3 Schottky barrier photodiodes significantly decreased to 139 and 200 ms, respectively, compared to those obtained without a graphene interlayer (2000 and 3000 ms). In addition, the W/graphene/ß-Ga2O3 Schottky barrier photodiode was highly stable, even at 150 °C.

The future of two-dimensional semiconductors beyond Moore's law.

The primary challenge facing silicon-based electronics, crucial for modern technological progress, is difficulty in dimensional scaling. This stems from a severe deterioration of transistor performance due to carrier scattering when silicon thickness is reduced below a few nanometres. Atomically thin two-dimensional (2D) semiconductors still maintain their electrical characteristics even at sub-nanometre scales and offer the potential for monolithic three-dimensional (3D) integration. Here we explore a strategic shift aimed at addressing the scaling bottleneck of silicon by adopting 2D semiconductors as new channel materials. Examining both academic and industrial viewpoints, we delve into the latest trends in channel materials, the integration of metal contacts and gate dielectrics, and offer insights into the emerging landscape of industrializing 2D semiconductor-based transistors for monolithic 3D integration.

Exceptional Thermochemical Stability of Graphene on N-Polar GaN for Remote Epitaxy.

In this study, we investigate the thermochemical stability of graphene on the GaN substrate for metal-organic chemical vapor deposition (MOCVD)-based remote epitaxy. Despite excellent physical properties of GaN, making it a compelling choice for high-performance electronic and light-emitting device applications, the challenge of thermochemical decomposition of graphene on a GaN substrate at high temperatures has obstructed the achievement of remote homoepitaxy via MOCVD. Our research uncovers an unexpected stability of graphene on N-polar GaN, thereby enabling the MOCVD-based remote homoepitaxy of N-polar GaN. Our comparative analysis of N- and Ga-polar GaN substrates reveals markedly different outcomes: while a graphene/N-polar GaN substrate produces releasable microcrystals (µCs), a graphene/Ga-polar GaN substrate yields nonreleasable thin films. We attribute this discrepancy to the polarity-dependent thermochemical stability of graphene on the GaN substrate and its subsequent reaction with hydrogen. Evidence obtained from Raman spectroscopy, electron microscopic analyses, and overlayer delamination points to a pronounced thermochemical stability of graphene on N-polar GaN during MOCVD-based remote homoepitaxy. Molecular dynamics simulations, corroborated by experimental data, further substantiate that the thermochemical stability of graphene is reliant on the polarity of GaN, due to different reactions with hydrogen at high temperatures. Based on the N-polar remote homoepitaxy of µCs, the practical application of our findings was demonstrated in fabrication of flexible light-emitting diodes composed of p-n junction µCs with InGaN heterostructures.

Remote epitaxial interaction through graphene.

The concept of remote epitaxy involves a two-dimensional van der Waals layer covering the substrate surface, which still enable adatoms to follow the atomic motif of the underlying substrate. The mode of growth must be carefully defined as defects, e.g., pinholes, in two-dimensional materials can allow direct epitaxy from the substrate, which, in combination with lateral epitaxial overgrowth, could also form an epilayer. Here, we show several unique cases that can only be observed for remote epitaxy, distinguishable from other two-dimensional material-based epitaxy mechanisms. We first grow BaTiO3 on patterned graphene to establish a condition for minimizing epitaxial lateral overgrowth. By observing entire nanometer-scale nuclei grown aligned to the substrate on pinhole-free graphene confirmed by high-resolution scanning transmission electron microscopy, we visually confirm that remote epitaxy is operative at the atomic scale. Macroscopically, we also show variations in the density of GaN microcrystal arrays that depend on the ionicity of substrates and the number of graphene layers.

High-throughput manufacturing of epitaxial membranes from a single wafer by 2D materials-based layer transfer process.

Layer transfer techniques have been extensively explored for semiconductor device fabrication as a path to reduce costs and to form heterogeneously integrated devices. These techniques entail isolating epitaxial layers from an expensive donor wafer to form freestanding membranes. However, current layer transfer processes are still low-throughput and too expensive to be commercially suitable. Here we report a high-throughput layer transfer technique that can produce multiple compound semiconductor membranes from a single wafer. We directly grow two-dimensional (2D) materials on III-N and III-V substrates using epitaxy tools, which enables a scheme comprised of multiple alternating layers of 2D materials and epilayers that can be formed by a single growth run. Each epilayer in the multistack structure is then harvested by layer-by-layer mechanical exfoliation, producing multiple freestanding membranes from a single wafer without involving time-consuming processes such as sacrificial layer etching or wafer polishing. Moreover, atomic-precision exfoliation at the 2D interface allows for the recycling of the wafers for subsequent membrane production, with the potential for greatly reducing the manufacturing cost.

Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites.

Maximizing the power conversion efficiency (PCE) of perovskite/silicon tandem solar cells that can exceed the Shockley-Queisser single-cell limit requires a high-performing, stable perovskite top cell with a wide bandgap. We developed a stable perovskite solar cell with a bandgap of ~1.7 electron volts that retained more than 80% of its initial PCE of 20.7% after 1000 hours of continuous illumination. Anion engineering of phenethylammonium-based two-dimensional (2D) additives was critical for controlling the structural and electrical properties of the 2D passivation layers based on a lead iodide framework. The high PCE of 26.7% of a monolithic two-terminal wide-bandgap perovskite/silicon tandem solar cell was made possible by the ideal combination of spectral responses of the top and bottom cells.

Improving Uniformity and Reproducibility of Hybrid Perovskite Solar Cells via a Low-Temperature Vacuum Deposition Process for NiOx Hole Transport Layers.

Recently, the trend in inverted hybrid perovskite solar cells (PVSCs) has been to utilize NiOx as hole transport layers. However, the majority of reported solution-processed NiOx films require a high-temperature thermal annealing process, which is unfavorable for large-scale manufacturing and suffers from lack of uniformity. We report, for the first time, e-beam evaporation as a low-temperature vacuum process for the deposition of NiOx hole transport layers for PVSCs. Device characterization shows that efficiency is on par with solution-processed methods, the highest efficiency at 15.4% with no obvious hysteresis. Differences are found to be due to the presence of more Ni3+ in e-beam evaporated NiOx, which are responsible for a lower transmittance but higher conductivity. Most importantly, e-beam-evaporated NiOx-based PVSCs show greater uniformity and reproducibility compared to spin-coated NiOx-based PVSCs. Finally, e-beam-evaporated NiOx has the additional advantage of being produced by a low-temperature deposition process and applicable over large areas. This work, therefore, represents a significant step toward large-area PVSCs, where e-beam evaporation can be used for the low-temperature uniform deposition of charge-transport layers, such as NiOx.

Effect of Donepezil on Wernicke Aphasia After Bilateral Middle Cerebral Artery Infarction: Subtraction Analysis of Brain F-18 Fluorodeoxyglucose Positron Emission Tomographic Images.

Aphasia is one of the most common neurologic deficits occurring after stroke. Although the speech-language therapy is a mainstream option for poststroke aphasia, pharmacotherapy is recently being tried to modulate different neurotransmitter systems. However, the efficacy of those treatments is still controversial. We present a case of a 53-year-old female patient with Wernicke aphasia, after the old infarction in the territory of left middle cerebral artery for 8 years and the recent infarction in the right middle cerebral artery for 4 months. On the initial evaluation, the Aphasia Quotient in Korean version of the Western Aphasia Battery was 25.6 of 100. Baseline brain F-18 fluorodeoxyglucose positron emission tomographic images demonstrated a decreased cerebral metabolism in the left temporoparietal area and right temporal lobe. Donepezil hydrochloride, a reversible acetylcholinesterase inhibitor, was orally administered 5 mg/d for 6 weeks after the initial evaluation and was increased to 10 mg/d for the following 6 weeks. After the donepezil treatment, the patient showed improvement in language function, scoring 51.0 of 100 on Aphasia Quotient. A subtraction analysis of the brain F-18 fluorodeoxyglucose positron emission tomographic images after donepezil medication demonstrated increased uptake in both middle temporal gyri, extended to the occipital area and the left cerebellum. Thus, we suggest that donepezil can be an effective therapeutic choice for the treatment of Wernicke aphasia.