RESUMEN
Soil contaminated with aqueous film-forming foams (AFFFs) containing per- and polyfluoroalkyl substances (PFASs) at firefighting training sites has become a major concern worldwide. To date, most studies have focused on assessing soil-water partitioning behavior of PFASs and the key factors that can affect their sorption, whereas PFASs leaching from contaminated soils have not yet been widely investigated. This study evaluated the leaching and desorption of a wide range of PFASs from twelve contaminated soils using the Australian Standard Leaching Procedure (ASLP), the U.S. EPA Multiple Extraction Procedure (MEP), and Leaching Environmental Assessment Framework (LEAF). All three leaching tests provided a similar assessment of PFAS leaching behavior. Leaching of PFASs from soils was related to C-chain lengths and their functional head groups. While short-chain (CF2 ≤ 6) PFASs were easily desorbed and leached, long-chain PFASs were more difficult to desorb. PFASs with a carboxylate head group were leached more readily and to a greater extent than those with a sulfonate or sulfonamide head group. Leaching of long-chain PFASs was pH-dependent where leaching increased at high pH, while leaching of short-chain PFASs was less sensitive to pH. Comparing different leaching tests showed that the results using the alkaline ASLP were similar to the cumulative MEP data and the former might be more practical for routine use than the MEP. No single soil property was adequately able to describe PFAS leaching from the soils. Overall, the PFAS chemical structure appeared to have a greater effect on PFAS leaching from soil than soil physicochemical properties.
Asunto(s)
Fluorocarburos , Contaminantes Químicos del Agua , Australia , Contaminación Ambiental , Fluorocarburos/análisis , Suelo/química , Contaminantes Químicos del Agua/análisisRESUMEN
This study investigated the mobilization of a wide range of per- and polyfluoroalkyl substances (PFASs) present in aqueous film-forming foams (AFFFs) in water-saturated soils through one-dimensional (1-D) column experiments with a view to assessing the feasibility of their remediation by soil desorption and washing. Results indicated that sorption/desorption of most of the shorter-carbon-chain PFASs (C ≤ 6) in soil reached greater than 99% rapidlyâafter approximately two pore volumes (PVs) and were well predicted by an equilibrium transport model, indicating that they will be readily removed by soil washing technologies. In contrast, the equilibrium model failed to predict the mobilization of longer-chain PFASs (C ≥ 7), indicating the presence of nonequilibrium sorption/desorption (confirmed by a flow interruption experiment). The actual time taken to attain 99% sorption/desorption was up to 5 times longer than predicted by the equilibrium model (e.g., â¼62 PVs versus â¼12 PVs predicted for perfluorooctane sulfonate (PFOS) in loamy sand). The increasing contribution of hydrophobic interactions over the electrostatic interactions is suggested as the main driving factor of the nonequilibrium processes. The inverse linear relationship (R2 = 0.6, p < 0.0001) between the nonequilibrium mass transfer rate coefficient and the Freundlich sorption coefficient could potentially be a useful means for preliminary evaluation of potential nonequilibrium sorption/desorption of PFASs in soils.
Asunto(s)
Fluorocarburos , Contaminantes del Suelo , Contaminantes Químicos del Agua , Fluorocarburos/análisis , Suelo/química , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
The aim of this study was to assess the soil-water partitioning behavior of a wider range of per- and polyfluoroalkyl substances (PFASs) onto soils covering diverse soil properties. The PFASs studied include perfluoroalkyl carboxylates (PFCAs), perfluoroalkane sulfonates (PFSAs), fluorotelomer sulfonates (FTSs), nonionic perfluoroalkane sulfonamides (FASAs), cyclic PFAS (PFEtCHxS), per- and polyfluoroalkyl ether acids (GenX, ADONA, 9Cl-PF3ONS), and three aqueous film-forming foam (AFFF)-related zwitterionic PFASs (AmPr-FHxSA, TAmPr-FHxSA, 6:2 FTSA-PrB). Soil-water partitioning coefficients (logâ¯Kd values) of the PFASs ranged from less than zero to approximately three, were chain-length-dependent, and were significantly linearly related to molecular weight (MW) for PFASs with MW > 350 g/mol (R2 = 0.94, p < 0.0001). Across all soils, the Kd values of all short-chain PFASs (≤5 -CF2- moieties) were similar and varied less (<0.5â¯log units) compared to long-chain PFASs (>0.5 to 1.5â¯â¯log units) and zwitterions AmPr- and TAmPr-FHxSA (â¼1.5 to 2â¯log units). Multiple soil properties described sorption of PFASs better than any single property. The effects of soil properties on sorption were different for anionic, nonionic, and zwitterionic PFASs. Solution pH could change both PFAS speciation and soil chemistry affecting surface complexation and electrostatic processes. The Kd values of all PFASs increased when solution pH decreased from approximately eight to three. Short-chain PFASs were less sensitive to solution pH than long-chain PFASs. The results indicate the complex interactions of PFASs with soil surfaces and the need to consider both PFAS type and soil properties to describe mobility in the environment.
Asunto(s)
Fluorocarburos , Contaminantes Químicos del Agua , Fluorocarburos/análisis , Concentración de Iones de Hidrógeno , Suelo , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
The application of fixed bed high rate nitrifying trickling filters (NTFs) for the removal of track organic chemicals of concern (CoC) is less well known than their application to nutrient removal in water treatment. Particularly, the effect of exogenous organic carbon substrate (sucrose) loading on the performance of NTFs is not well understood. A laboratory-scale NTF system was operated in recirculation mode, with the objective of removing ammonia and CoC simultaneously. The efficiency of a high rate NTF for removal both of low concentration of ammonia (5 mg NH4-N L(-1)) and different concentrations of CoC in the presence of an exogenous organic carbon substrate (30 mg total organic carbon (TOC) L(-1)) was investigated. In the presence of exogenous organic carbon, the results demonstrated that the high rate NTF was able to successfully remove most of the CoCs investigated, with the removal ranging from 20.2% to 87.54%. High removal efficiencies were observed for acetaminophen (87.54%), bisphenol A (86.60%), trimethoprim (86.24%) and 17α-ethynylestradiol (80.60%). It was followed by the medium removal efficiency for N, N-diethyl-m-toluamide (61.31%) and atrazine (56.90%). In contrast, the removal of caffeine (28.43%) and benzotriazole (20.20%) was poorer in the presence of exogenous organic carbon. The removal efficiency for CoC was also compared with the results obtained in our previous study in the absence of exogenous organic carbon. The results showed that the addition of exogenous organic carbon was able to improve the removal of some of the CoC. Significant TOC percentage removals (45.68%-84.43%) and ammonia removal rate (mean value of 0.44 mg NH4-N L(-1) h(-1)) were also achieved in this study. The findings from this study provide valuable information for optimising the efficiency of high rate NTF for the removal of ammonia, CoC and TOC.
Asunto(s)
Filtración/métodos , Hidrocarburos/análisis , Modelos Teóricos , Nitrificación , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos , Hidrocarburos/química , Contaminantes Químicos del Agua/químicaRESUMEN
The detection of a range of active pharmaceutical ingredients (APIs) in the soil environment has led to a number of publications demonstrating uptake by crops, however very few studies have explored the potential for impacts on plant development as a result of API uptake. This study investigated the effect of carbamazepine and verapamil (0.005-10 mg/kg) on a range of plant responses in zucchini (Cucurbita pepo). Uptake increased in a dose-dependent manner, with maximum leaf concentrations of 821.9 and 2.2 mg/kg for carbamazepine and verapamil, respectively. Increased carbamazepine uptake by zucchini resulted in a decrease in above (<60%) and below (<30%) ground biomass compared to the controls (p < 0.05). At soil concentrations >4 mg/kg the mature leaves suffered from burnt edges and white spots as well as a reduction in photosynthetic pigments but no such effects were seen for verapamil. For both APIs, further investigations revealed significant differences in the concentrations of selected plant hormones (auxins, cytokinins, abscisic acid and jasmonates), and in the nutrient composition of the leaves in comparison to the controls (p < 0.05). This is some of the first research to demonstrate that the exposure of plants to APIs is likely to cause impacts on plant development with unknown implications.
Asunto(s)
Carbamazepina/farmacocinética , Cucurbita/efectos de los fármacos , Contaminantes del Suelo/farmacocinética , Verapamilo/farmacocinética , Biomasa , Carbamazepina/toxicidad , Cucurbita/crecimiento & desarrollo , Cucurbita/metabolismo , Relación Dosis-Respuesta a Droga , Fotosíntesis/efectos de los fármacos , Desarrollo de la Planta/efectos de los fármacos , Reguladores del Crecimiento de las Plantas/metabolismo , Hojas de la Planta/química , Hojas de la Planta/efectos de los fármacos , Hojas de la Planta/metabolismo , Contaminantes del Suelo/análisis , Verapamilo/toxicidadRESUMEN
Perfluoroalkyl substances (PFASs) have received great attention from the public and scientific community due to their potential adverse impacts on the ecosystem and human health. We investigated the occurrence and distribution of 16 PFASs from 2 classes of PFASs-perfluoroalkyl carboxylic acids and perfluoroalkane sulfonic acids-in the archived surface sediments of five major rivers (Yellow River, Hai River, Liao River, Zhujiang River, and Dongjiang River) in northern and southern China. The study was also performed during the wet and dry seasons. Perfluorooctanoic acid and perfluorooctane sulfonic acid were the most frequently detected (detection frequency = 100 and 63 %, respectively) in the sediments of the five rivers; the concentrations ranged from 0.08 to 0.99 ng/g dry weight (dw) and were lower than the limit of detection (Asunto(s)
Ácidos Alcanesulfónicos/análisis
, Caprilatos/análisis
, Ácidos Decanoicos/análisis
, Monitoreo del Ambiente
, Ácidos Grasos/análisis
, Fluorocarburos/análisis
, Contaminantes Químicos del Agua/análisis
, China
, Sedimentos Geológicos/química
, Ríos/química
RESUMEN
Indaziflam is a relatively new herbicide for which sorption-desorption information is lacking, and nothing is available on its metabolites. Information is needed on the multiple soil and pesticide characteristics known to influence these processes. For four soils, the order of sorption was indaziflam (N-[1R,2S)-2,3-dihydro-2,6-dimethyl-1H-inden-1-yl]-6-[(1R)-1-fluoroethyl]-1,3,5-triazine-2,4-diamine) (sandy clay loam: Kf = 5.9, 1/nf = 0.7, Kfoc = 447; sandy loam: Kf = 3.9, 1/nf = 0.9, Kfoc = 276) > triazine indanone metabolite (N-[(1R,2S)-2,3-dihydro-2,6-dimethyl-3-oxo-1H-inden-1-yl]-6-[(1R)-1-fluoroethyl]-1,3,5-triazine-2,4-diamine) (sandy clay loam: Kf = 2.1, 1/nf = 0.8, Kfoc = 177; sandy loam: Kf = 1.7, 1/nf = 0.9, Kfoc = 118) > fluoroethyldiaminotriazine metabolite (6-[(1R-1-Fluoroethyl]-1,3,5-triazine-2,4-diamine) (sandy clay loam: Kf = 0.3, 1/nf = 0.9, Kfoc = 28; sandy loam: Kf = 0.3, 1/nf = 0.9, Kfoc = 22) = indaziflam carboxylic acid metabolite (2S,3R)-3-[[4-amino-6-[(1R)-1-fluoroethyl]-1,3,5-triazin-2-yl]amino]-2,3-dihydro-2-methyl-1H-indene-5-carboxylic acid) (sandy clay loam: Kf = 0.3, 1/nf = 0.9, Kfoc = 22; sandy loam: Kf = 0.5, 1/nf = 0.8, Kfoc = 32). The metabolites being more polar than the parent compound showed lower sorption. Desorption was hysteretic for indaziflam and triazine indanone metabolite, but not for the other two metabolites. Unsaturated transient flow Kd's were lower than batch Kd's for indaziflam, but similar for fluoroethyldiaminotriazine metabolite. Batch Kd's would overpredict potential offsite transport if desorption hysteresis is not taken into account.
Asunto(s)
Herbicidas/análisis , Indenos/análisis , Contaminantes del Suelo/análisis , Suelo/química , Triazinas/análisis , Adsorción , CinéticaRESUMEN
Per- and poly-fluoroalkyl substances (PFASs) are contaminants of emerging concern, yet the understanding of factors that control their leaching and release from contaminated soils remains limited. This study aimed to investigate the impact of dissolved organic carbon (DOC) on the release of PFASs-specifically, perfluorohexane sulfonate (PFHxS), perfluorooctane sulfonate (PFOS), and perfluorooctanoic acid (PFOA)from soils contaminated by aqueous film forming foam (AFFF). Batch aqueous leaching experiments were conducted on AFFF-contaminated soils under alkaline solution conditions (pH 9.5, 10.5, and 12) as it enhances leaching of both PFAS and DOC. Leaching of PFOS was significantly increased under alkaline conditions. Although the leaching of PFAS generally increased with pH, PFOS appeared to be more retained under the very alkaline pH conditions used in this study. At the same solution pH, leaching of PFOS and DOC was less in Ca(OH)2 than in NaOH. The retention of PFOS under these conditions may be attributable to the shielding of the negative charge of the soil components and colloids (e.g., DOC and clay minerals) in the leachates and/or the screening of negative charges on head groups of PFOS due to the high concentration of divalent cations. Solution chemistry affected desorption of PFOS more than PFHxS and PFOA. The study highlights that the influence of DOC on PFAS leaching and transport can be very complex, and depends on leachate chemistry (e.g., pH and cation type), PFAS chemistry, the magnitude of PFAS contamination and factors that influence the solid:liquid partitioning of organic carbon in soil.
Asunto(s)
Ácidos Alcanesulfónicos , Carbono , Fluorocarburos , Contaminantes del Suelo , Suelo , Fluorocarburos/química , Contaminantes del Suelo/química , Suelo/química , Carbono/química , Ácidos Alcanesulfónicos/química , Concentración de Iones de Hidrógeno , Caprilatos/química , Adsorción , Ácidos SulfónicosRESUMEN
Disinfection by-products (DBPs) are formed through the disinfection of water containing precursors such as natural organic matter or anthropogenic compounds (e.g., pharmaceuticals and pesticides). Due to the ever increasing use of plastics, elastomers, and other polymers in our daily lives, polymer-based materials (PBMs) are detected more frequently and at higher concentrations in water and wastewater. The present review provides a comprehensive and systematic analysis of the contribution of PBMs - including elastomers, tire waste, polyelectrolytes, and microplastics - as precursors of DBPs in water and wastewater. Literature shows that the presence of PBMs can lead to the leaching of dissolved organic matter (DOM) and subsequent formation of DBPs upon disinfection in aqueous media. The quantity and type of DBPs formed strongly depends on the type of polymer, its concentration, its age, water salinity, and disinfection conditions such as oxidant dosage, pH, temperature, and contact time. DOM leaching from elastomers and tire waste was shown to form N-nitrosodimethylamine up to concerning levels of 930 ng/L and 466,715 ng/L, respectively upon chemical disinfection under laboratory conditions. Polyelectrolytes can also react with chemical disinfectants to form toxic DBPs. Recent findings indicate trihalomethanes formation potential of plastics can be as high as 15,990 µg/L based on the maximum formation potential under extreme conditions. Our analysis highlights an overlooked contribution of DOM leaching from PBMs as DBP precursors during disinfection of water and wastewater. Further studies need to be conducted to ascertain the extent of this contribution in real water and wastewater treatment plants.
Asunto(s)
Desinfectantes , Contaminantes Químicos del Agua , Purificación del Agua , Desinfección , Microplásticos , Plásticos , Polímeros , Aguas Residuales , Polielectrolitos , Halogenación , Desinfectantes/análisis , Agua/análisis , Elastómeros , Contaminantes Químicos del Agua/química , Trihalometanos/análisisRESUMEN
Understanding the sorption behavior of per- and poly-fluoroalkyl substances (PFAS) in soils are essential for assessing their mobility and risk in the environment. Heavy metals often coexist with PFAS depending on the source and history of contamination. In this study, we investigated the effect of heavy metal co-contaminants (Pb2+, Cu2+ and Zn2+) on the sorption of 13 anionic PFAS with different perfluorocarbon chain length (C3-C9) in two soils with different properties. Results revealed that Pb2+, Cu2+ and Zn2+ had little effect on the sorption of most short-chain compounds, while the presence of these heavy metals enhanced the sorption of long-chain PFAS in two soils. The distribution coefficients (Kd) of several long-chain PFAS linearly increased with increasing concentrations of heavy metal, especially in the presence of Pb2+ (ΔKd/Δ [Pb2+] > 3 for PFOS and PFNA vs <1 for PFPeS and PFHxS). While several mechanisms may have contributed to the enhancement of sorption of PFAS, the heavy metals most likely contributed through enhanced hydrophobic interactions of PFAS by neutralizing the negative charge of adsorption surfaces in soils and thus making it more favorable for their partitioning onto the solid phase. Moreover, the increase in the concentrations of heavy metals led to a decrease in the pH of the system and promoted sorption of long-chain compounds, especially in soil with lower organic carbon content. Overall, this study provides evidence that the presence of co-existing heavy metal cations in soils can significantly enhance the sorption of long-chain PFAS onto soil, thereby potentially limiting their mobility in the environment.
RESUMEN
Immobilisation/stabilisation is one of the most developed and studied approaches for treating soils contaminated with per- and poly-fluoroalkyl substances (PFAS). However, its application has been inhibited by insufficient understanding of the effectiveness of added soil sorbents over time. Herein, we present results on the effectiveness of select carbon-based sorbents, over 4 years (longevity) and multiple laboratory leaching conditions (durability). Standard batch leaching tests simulating aggressive, worst-case scenario conditions for leaching (i.e., shaking for 24-48 h at high liquid/solid ratios) were employed to test longevity and durability of stabilisation in clay-loam and sandy-loam soils historically contaminated with PFAS (2 and 14 mg/kg ∑28 PFAS). The different sorbents, which were applied at 1-6% (w/w), reduced leaching of PFAS from the soils to varying degrees. Among the 5 sorbents tested, initial assessments completed 1 week after treatment revealed that 2 powdered activated carbon (PAC) sorbents and 1 biochar were able to reduce leaching of PFAS in the soil by at least 95%. Four years after treatment, the performance of the PAC sorbents did not significantly change, whilst colloidal AC improved and was able to reduce leaching of PFAS by at least 94%. The AC-treated soils also appeared to be durable and achieved at least 95% reduction in PFAS leaching under repetitive leaching events (5 times extraction) and with minimal effect of pH (pH 4-10.5). In contrast, the biochars were affected by aging and were at least 22% less effective in reducing PFAS leaching across a range of leaching conditions. Sorbent performance was generally consistent with the sorbent's physical and chemical characteristics. Overall, the AC sorbents used in this study appeared to be better than the biochars in stabilising PFAS in the long term.
Asunto(s)
Fluorocarburos , Contaminantes del Suelo , Suelo/química , Contaminantes del Suelo/análisis , Carbón Orgánico/químicaRESUMEN
Removal of per- and polyfluoroalkyl substances (PFASs) from water or their immobilization in soil using carbon-based sorbents is one of the cost-effective techniques. Considering the variety of carbon-based sorbents, identifying the key sorbent properties responsible for PFASs removal from solution or immobilization in the soil can assist in the selection of the best sorbents for management of contaminated sites. This study evaluated the performance of 28 carbon-based sorbents including granular and powdered activated carbon (GAC and PAC), mixed mode carbon mineral material, biochars, and graphene-based materials (GNBs). The sorbents were characterized for a range of physical and chemical properties. PFASs' sorption from an AFFF-spiked solution was examined via a batch experiment, while their ability to immobilize PFASs in soil was tested following mixing, incubation and extraction using the Australian Standard Leaching Procedure. Both soil and solution were treated with 1 % w/w sorbents. Comparing different carbon-based materials, PAC, mixed mode carbon mineral material and GAC were the most effective in sorbing PFASs in both solution and soil. Among the different physical characteristics measured, the sorption of long-chain and more hydrophobic PFASs in both soil and solution was best correlated with sorbent surface area measured using methylene blue, which highlights the importance of mesopores in PFASs sorption. Iodine number was found to be a better indicator of the sorption of short-chain and more hydrophilic PFASs from solution but was found to be poorly correlated with PFASs immobilization in soil for activated carbons. Sorbents with a net positive charge performed better than those with a net negative charge, or no net charge. This study showed that surface area measured by methylene blue and surface charge are the best indicators of sorbent performance with respect to sorption/reducing leaching of PFASs. These properties may be helpful in selecting sorbents for PFASs remediation of soils/waters.
RESUMEN
This paper aims to describe the performance of a soil washing plant (SWP) for remediating a per- and poly-fluoroalkyl substances (PFASs)-contaminated soil with a high clay content (61%). The SWP used both physical and chemical processes; fractionation of the soil particles by size and partitioning of PFASs into the aqueous phase to remove PFASs from the soil. Contaminated water was treated in series with granulated activated carbon (GAC) and ion-exchange resin and reused within the SWP. Approximately 2200 t (dry weight) of PFAS-contaminated soil was treated in 25 batches of 90 t each, with a throughput of approximately 11 t soil/hr. Efficiency of the SWP was measured by observed decreases in total and leachable concentrations of PFASs in the soil. Average removal efficiencies (RE) were up to 97.1% for perfluorocarboxylic acids and 94.9% for perfluorosulfonic acids. REs varied among different PFASs depending on their chemistry (functional head group, carbon chain length) and were independent of the total PFAS concentrations in each soil batch. Mass balance analysis found approximately 90% of the PFAS mass in the soil was transferred to the wash solution and > 99.9% of the PFAS mass in the wash solution was transferred onto the GAC without any breakthrough.
Asunto(s)
Fluorocarburos , Contaminantes Químicos del Agua , Suelo/química , Fluorocarburos/análisis , Contaminantes Químicos del Agua/análisis , Arcilla , Contaminación del Agua/análisis , Carbón Orgánico , PlantasRESUMEN
Spills of hydraulic fracturing (HF) fluids and of produced water during unconventional gas extraction operations may cause soil contamination. We studied the degradation and microbial toxicity of selected HF chemical components including two biocides (methylisothiozolinone- MIT, chloromethylisothiozolinone- CMIT), a gel-breaker aid (triethanolamine -TEA), and three geogenic chemicals (phenol, m-cresol and p-cresol) in ultrapure water, HF fluid and produced water in five different soil types (surface and subsurface soils). The degradation of the two biocides (in soils treated with HF fluid or ultrapure water) and of the three geogenic chemicals (in soils treated with produced water) was rapid (in all cases DT50 values < 2 days in surface soils). In contrast, the loss of TEA was much slower in soils, especially in those treated with HF fluid (DT50 > 30 days). Sorption coefficients (Koc in L/Kg) in these soils ranged from 71 to 733 for TEA, 64-408 for MIT and 11-72 for CMIT. In terms of soil microbial toxicity, exposure to HF fluid and produced water reduced microbial respiration, albeit temporarily. The overall microbial activities in surface soils contaminated with produced water had fully recovered in most soils. In contrast, the HF fluid addition to soils completely inhibited the nitrification in all soils, with little recovery over the 60 day experimental period. In the case of produced water exposure, three out of five surface soils showed complete recovery in nitrification during the study period. The functional genes for nitrogen fixation (nifH) and carbon cycling (GA1) and microbial community composition (16 S rRNA) were significantly affected by HF fluid in some soils. Overall, the study shows that the HF fluid can have significant detrimental impact on soil microbial functions, especially on nitrogen cycling. More work is needed to identify the exact cause of microbial toxicity in soils contaminated with HF fluid.
Asunto(s)
Desinfectantes , Fracking Hidráulico , Suelo , Aguas Residuales/química , AguaRESUMEN
The effect of soluble cations on sorption in soils of a range of anionic PFAS is not well studied. We investigated the role of three common cations (Na+, Ca2+, and Mg2+) at varying solution concentrations on the sorption coefficients (Kd) of 18 anionic PFAS in two contrasting soils. The effective charge of the soil suspension (Zeta potential) became less negative as the concentration of these cations increased in the soil solutions. Perfluorinated compounds showed greater sorption than polyfluorinated compounds, with sulfonates of comparable chain lengths showing higher sorption than the carboxylates. We observed that the Kd values of several PFAS in the two soils were positively correlated with the concentration of cations in solution, especially in the presence of polyvalent cations (Ca2+and Mg2+). The changes in sorption with cation concentration were more prominent for long-chain PFAS, with C > 10 PFAS being completely removed from solution at higher cation concentrations. The emerging PFAS (replacement compounds GenX and ADONA) showed negligible or little sorption (Kd < 0.6 L/kg). While several mechanisms contribute towards sorption of PFAS in the presence of cations, we conclude that the primary effect of cations is through screening of negative charges on head groups of PFAS and reorientation of molecules at the interface between organic matter surfaces and soil solution as well as charge neutralisation at soil solid surface. Screening of negative charges allows for greater hydrophobic interaction between hydrophobic tails of PFAS and soil surfaces resulting in greater sorption. Increasing cation concentrations in soil solutions could thus reduce mobility of PFAS through a soil profile.
Asunto(s)
Fluorocarburos , Contaminantes del Suelo , Adsorción , Cationes/química , Fluorocarburos/análisis , Interacciones Hidrofóbicas e Hidrofílicas , Concentración Osmolar , Suelo/químicaRESUMEN
We studied the sorption behaviour of fullerene nano-C(60) particles (nC(60)) in soil from binary solvent mixtures of ethanol-water in order to critically evaluate the previous reports in the literature that the partitioning mechanism explains the soil sorption of fullerene C(60) as hydrophobic molecules. The sorption of nC(60) particles was studied in a range of solvent mixtures by changing volume fractions of ethanol from 20 to 100 percent. Sorption and particle characteristics were found to be very different in ethanol : water mixtures above and below 60% ethanol. In the range of 20-60% ethanol, sorption increased from 1.2 to 14.6 L kg(-1) accompanied by a change in zeta (ζ) potential from -32.4 to -7.2 mV. This observation can be attributed to hydrophilic interactions that negatively charged nC(60) particles undergo with soil colloids and water molecules. From 60% to 100% ethanol volume fractions, hydrophobic interactions of weakly charged nanoparticles may control the overall extent of soil sorption. The findings of this study indicate the importance of hydrophilic forces in controlling the sorption behaviour of nC(60) particles which are stabilized in water dominated solvent mixtures. The validity of the partitioning mechanism and K(OC) modelling approach in describing and estimating the sorption of nC(60) particles in soil (previously suggested in the literature) are, therefore, questioned.
Asunto(s)
Fulerenos/química , Contaminantes del Suelo/química , Suelo/química , Adsorción , Etanol/química , Fulerenos/análisis , Interacciones Hidrofóbicas e Hidrofílicas , Cinética , Modelos Químicos , Contaminantes del Suelo/análisis , Agua/químicaRESUMEN
Nanopesticides are not only in an advanced state of research and development but have started to appear on the market. Industry and regulatory agencies need a consolidated and comprehensive framework and guidance for human health risk assessments. In this perspective we develop such a comprehensive framework by exploring two case studies from relevant product types: an active ingredient delivered with a nanocarrier system, and a nanoparticle as an active ingredient. For a nanocarrier system, three entities are tracked during the assessment: the nanocarrier-active ingredient complex, the empty nanocarrier remaining after the complete release of the active ingredient, and the released active ingredient. For the nanoparticle of pure active ingredient, only two entities are relevant: the nanoparticle and the released ions. We suggest important adaptations of the existing pesticide framework to determine the relevant nanopesticide entities and their concentrations for toxicity testing. Depending on the nature of the nanopesticides, additional data requirements, such as those pertaining to durability in biological media and potential for crossing biological barriers, have also been identified. Overall, our framework suggests a tiered approach for human health risk assessment, which is applicable for a range of nanopesticide products to support regulators and industry in making informed decisions on nanopesticide submissions. Brief summaries of suitable methods including references to existing standards (if available) have been included together with an analysis of current knowledge gaps. Our study is an important step towards a harmonized approach accepted by regulatory agencies for assessing nanopesticides.
Asunto(s)
Nanopartículas/efectos adversos , Plaguicidas/efectos adversos , Medición de Riesgo , Humanos , Pruebas de ToxicidadRESUMEN
This study investigated the potential aging and plant bioaccumulation of three perfluoroalkyl acids (PFAAs), perfluorosulphonic acid (PFOS), perfluorooctanoic acid (PFOA) and perfluorohexanesulphonic acid (PFHxS) in 20 soils over a six-month period. Sorption coefficients (Log Kd) ranged from 0.13-1.28 for PFHxS, 0.17-1.06 for PFOA and 0.98-2.03 for PFOS, respectively, and bioaccumulation factors (Log BAFs) ranged from 0.29-1.24, 0.22-1.46 and 0.05-0.65 for PFHxS, PFOA and PFOS, respectively. Over the six-month period, Kd values significantly increased for PFHxS and PFOA but the magnitude of the increase was very small and did not translate into differences in plant PFAA-concentrations between aged and freshly spiked treatments. The Kd and BAF values were modelled by multiple linear regression (MLR) to soil physico-chemical properties and by partial least squares regression to soil spectra acquired by mid-infrared spectroscopy (DRIFT-PLSR). Modelling of each PFAA was influenced by different soil properties, including organic carbon, pH, CEC, exchangeable cations (Ca2+, Mg2+, Na+ and K+) and oxalate extractable Al. BAF values were not strongly correlated to any soil property but were inversely correlated to Kd values. Our results indicate that limited aging occurred in these soils over the six-month period.
Asunto(s)
Ácidos Alcanesulfónicos , Fluorocarburos , Caprilatos , Fluorocarburos/análisis , SueloRESUMEN
An efficient and sensitive method for simultaneous determination of 38 pesticides in agricultural drainage waters and soils has been developed and validated. Water samples were extracted using solid-phase extraction with C18 cartridges while solid samples (suspended particle matter and soil) were extracted by using the quick, easy, cheap, effective, rugged and safe (QuEChERS) extraction method. The target pesticides were analyzed by using gas chromatography-mass spectrometry with electron impact ionization. The proposed method allowed a simultaneous determination and confirmation of a large number of pesticides in agricultural drainage waters, suspended particle matters and soils/sediments with a good reproducibility and low detection limits. The developed method was applied to a survey of pesticides in a vegetable growing area of Guangzhou, China. The pesticides commonly found in the area were butachlor, carbofuran, dichlorvos, fipronil, isocarbophos and pyridaben.
Asunto(s)
Cromatografía de Gases y Espectrometría de Masas/métodos , Herbicidas/análisis , Insecticidas/análisis , Residuos de Plaguicidas/análisis , Suelo/análisis , Agua/química , Agricultura , Límite de Detección , Reproducibilidad de los Resultados , Contaminantes del Suelo/análisis , Extracción en Fase Sólida , Contaminantes Químicos del Agua/análisisRESUMEN
Biochar derived from partial combustion of vegetation is ubiquitous and potentially effective in sequestration of environmental contaminants. Biochars were prepared by burning of red gum (Eucalyptus spp.) woodchips at 450 and 850 degrees C (labeled as BC450 and BC850). These two biochars were found to possess markedly different properties in terms of surface area and porosity. Short-term equilibration tests (24 hr) were conducted to assess the sorption-desorption behavior of pyrimethanil in the soil amended with various amounts of biochar of each type, with a special focus on the desorption behavior of the sorbed pesticide through four times successive desorption by dilution. Sorption coefficient and isotherm nonlinearity of the amended soils progressively increased with the content of biochar in the soil. Biochar BC850 with higher surface area and microporosity showed a stronger effect on the reversibility of sorption pesticide. The soils amended with 5% BC450 and 1% BC850 had nearly the same sorption capacity for pyrimethanil; however, their desorption processes were very different with 13.65% and 1.49% of the sorbed pesticide being released, respectively. This study suggested that biochar in soil could be an important factor for immobilization of a pesticide and thus affecting its environment fate in soil.