RESUMEN
Nitrogen-containing functional groups were generated on the surface of partially oxidized multi-walled carbon nanotubes (CNTs) via post-treatment in ammonia. The treatment temperature was varied in order to tune the amount and type of nitrogen- and oxygen-containing functional groups, which were studied using high-resolution X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD). The surface defects on CNTs due to the incorporation of nitrogen were investigated by Raman spectroscopy. Deconvoluted XP N1s spectra were used for the quantification of different nitrogen-containing functional groups, and TPD studies were performed in inert and ammonia atmosphere to investigate the surface reactions occurring on the oxidized CNT surfaces quantitatively. Nitrile, lactam, imide and amine-type functional groups were formed in the presence of ammonia below 300 degrees C. When the OCNTs were treated in the medium temperature range between 300 degrees C to 500 degrees C, mainly pyridine-type nitrogen groups were generated, whereas pyridinic, pyrrolic and quaternary-type nitrogen groups were the dominating species present on the CNT surface when treated above 500 degrees C. It was found that about 38% of the oxygen functional groups react with ammonia below 500 degrees C.
RESUMEN
Our results indicate that small amounts of an oxide deposited on a stable metal surface can trigger a massive surface reconstruction under reaction conditions. In low-energy electron microscopy (LEEM) experiments, no reconstruction of Cu(111) is observed after chemisorbing oxygen or after reducing O/Cu(111) in a CO atmosphere. On the other hand, LEEM images taken in situ during the reduction of CeO2/CuO1-x/Cu(111) show a complex nonuniform transformation of the surface morphology. Ceria particles act as nucleation sites for the growth of copper microterraces once CuO1-x is reduced. Can this reconstructed surface be used to enhance the catalytic activity of inverse oxide/metal catalysts? Indeed, CeOx on reconstructed Cu(111) is an extremely active catalyst for the water-gas shift process (CO + H2O â H2 + CO2), with the Cu microterraces providing very efficient sites for the dissociation of water and subsequent reaction with CO.
RESUMEN
Carbon nanotubes (CNT) supported platinum-ruthenium (Pt-Ru) catalysts were prepared by impregnation-reduction using an ethanolic solution of H2PtCl6 and RuCl3. The effect of reduction temperatures on particle size, surface area and their relationship to the electrocatalytic activity for methanol oxidation were investigated. Thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, X-ray diffraction (XRD) as well as X-ray photoelectron spectroscopy (XPS) were used for the catalyst characterization. XRD analysis showed that the PtRu/ CNT catalysts possibly consist of separate Pt and Ru phases. XPS analysis showed that the catalysts contain hydrous ruthenium oxide in addition to Pt and Ru metal and oxide species. The electrocatalytic activities of the catalysts were investigated in half-cell experiments using cyclic voltammetry, CO stripping voltammetry, chronoamperometry, and impedance spectroscopy. The results showed that the catalyst reduced at a temperature of 350 degrees C had the largest electrochemical surface area, lowest charge transfer resistance and the highest electrocatalytic activity for methanol oxidation. The superior catalytic activity is discussed based on the presence of appropriate amount of hydrated Ru oxide.
RESUMEN
A highly efficient one-step process to generate Cu-Zn colloids was developed, in which the colloidal particles were synthesized from Cu and Zn stearates by reduction with H(2) in a continuously operated stirred tank reactor. The resulting spherical, well separated particles have a size of 5-10 nm, consisting of a crystalline Cu(0) core (fcc) stabilized by a Zn stearate shell without long-range order. In situ attenuated total reflection FTIR spectroscopy was used to monitor the shift of the C-O stretching vibration of adsorbed CO as a function of temperature and pressure. The absence of the CO rotation-vibration bands of dissolved CO allowed us to obtain FTIR spectra at a CO pressure of 1.0 MPa at 473 K resulting in three shifted CO bands at 2030-2025, 1979-1978, and 1920 cm(-1). These bands indicate the presence of reduced coadsorbed Zn species on the metallic Cu surface. Cyclic CO adsorption experiments demonstrated the dynamics of the interaction between the Cu core and the Zn stearate shell.