Controlling Morphologies of Redox-Responsive Polymeric Nanocarriers for a Smart Drug Delivery System.

Redox-responsive nanocarriers using disulfides or thiols have received considerable attention owing to the higher levels of glutathione (GSH) in cancer cells than those in extracellular fluids. Nevertheless, the normal-to-cancer-cell selectivity of these nanocarriers has not yet been clarified. Nanocarriers exhibit different cytotoxicities depending on the morphologies they adopt under the redox-active conditions typically existing in cancerous cells. Therefore, not only GSH levels but also reactive oxygen species (ROS) levels and other complex cancerous cell conditions must be considered for the development of smart drug delivery systems. In this article, we review the structural design of redox-responsive polymers that exhibit different morphological changes in environments akin to cancerous cells (e. g., GSH- and ROS-abundant conditions). In addition, we propose a molecular design for the spatiotemporal control of nanocarrier morphology depending on the levels of both GSH and ROS upon photoirradiation to increase the cytotoxicity difference between normal and cancer cells.

Ionic Ir(III) complex-interfacial layer for efficient carrier collection via induced electric dipole.

The power conversion efficiency (PCE) of polymer solar cells (PSCs) has recently reached >19% through the development of photoactive materials, particularly non-fullerene acceptors. Interfacial layers (ILs) have been another essential factor in optimizing device charge extraction. In this study, we propose a series of ILs, in which ionic iridium(III) (Ir(III)) complexes of different alkali metal cations (Li+, Na+, and K+) enhance the charge collection efficiency between zinc oxide and active layers through an induced internal electric field. The anionic coordinate sphere and counter-cations of the Ir(III) complexes are distributed according to the operating voltage of the PSCs, causing electric dipoles that enhance the internal electric field and charge collection efficiency. Ion species migration in the ILs is confirmed using electrochemical impedance spectroscopy. The PCE of the PM6:Y6-based PSCs was improved from 14.0% to 15.6% by introducing an IL (Ir-K+). Furthermore, the stability of PSCs containing ionic Ir(III) complexes is enhanced significantly under ultraviolet (UV) light and AM 1.5 G one-sun irradiation owing to the intense UV absorption capacity and photo durability of the ILs. A device containing the Ir(III) complex-based ILs retained ∼60% of its initial PCE after UV irradiation, whereas the control device retained only ∼20%.

Contact-ID, a tool for profiling organelle contact sites, reveals regulatory proteins of mitochondrial-associated membrane formation.

The mitochondria-associated membrane (MAM) has emerged as a cellular signaling hub regulating various cellular processes. However, its molecular components remain unclear owing to lack of reliable methods to purify the intact MAM proteome in a physiological context. Here, we introduce Contact-ID, a split-pair system of BioID with strong activity, for identification of the MAM proteome in live cells. Contact-ID specifically labeled proteins proximal to the contact sites of the endoplasmic reticulum (ER) and mitochondria, and thereby identified 115 MAM-specific proteins. The identified MAM proteins were largely annotated with the outer mitochondrial membrane (OMM) and ER membrane proteins with MAM-related functions: e.g., FKBP8, an OMM protein, facilitated MAM formation and local calcium transport at the MAM. Furthermore, the definitive identification of biotinylation sites revealed membrane topologies of 85 integral membrane proteins. Contact-ID revealed regulatory proteins for MAM formation and could be reliably utilized to profile the proteome at any organelle-membrane contact sites in live cells.

Non-destructive Monitoring of Dye Depth Profile in Mesoporous TiO2 Electrodes of Solar Cells with Micro-SORS.

The dye distribution within a photo-electrode is a key parameter in determining the performances of dye-sensitized photon-to-electron conversion devices, such as dye-sensitized solar cells (DSSCs). A traditional, depth profiling investigation by destructive means including cross-sectional sampling is unsuitable for large quality control applications in manufacturing processes. Therefore, a non-destructive monitoring of the dye depth profile is required, which is the first step toward a non-destructive evaluation of the internal degradation of the device in the field. Here, we present a conceptual demonstration of the ability to monitor the dye depth profile within the light active layer of DSSCs by non-destructive means with high chemical specificity using a recently developed non-destructive/non-invasive Raman method, micro-spatially offset Raman spectroscopy (micro-SORS). Micro-SORS is able to probe through turbid materials, providing the molecular identification of compounds located under the surface, without the need of resorting to a cross-sectional analysis. The study was performed on the photo-electrode of DSSCs. This represents the first demonstration of the micro-SORS concept in the solar cell area as well as, more generally, the application of micro-SORS to the thinnest layer to date. A sample set has been prepared with varying concentrations of the dye and the thickness of the matrix consisting of a titanium dioxide layer. The results showed that micro-SORS can unequivocally discriminate between the homogeneous and inhomogeneous dye depth profiles. Moreover, micro-SORS outcomes have been compared with the results obtained with destructive time-of-flight secondary ion mass spectrometry measurements. The results of the two techniques are in good agreement, confirming the reliability of micro-SORS analysis. Therefore, this study is expected to pave the way for establishing a wider and more effective monitoring capability in this important field.

Dual-Modulated Release of a Cytotoxic Photosensitizer Using Photogenerated Reactive Oxygen Species and Glutathione.

Reversible thiol-disulfide exchange chemistry is of particular interest in drug delivery systems. However, high levels of glutathione (GSH) in cancer cells are hard to distinguish from GSH in normal cells, resulting in unmanageable cytotoxic drug release. This study investigates the spatiotemporally-controlled irreversible degradation of Ir-based photosensitizer (TIr3)-encapsulating nanogels (IrNG) through the hyperoxidation of resulting intracellular thiols using reactive oxygen species (ROS). A highly cytotoxic TIr3 was stably encapsulated within IrNG through hydrophobic interactions and reversible crosslinking between its disulfide bonds and thiols in the absence of light, resulting in high biocompatibility under normal cellular conditions. However, upon photoirradiation, TIr3 generated high levels of ROS, irreversibly oxidizing the thiols to induce electrostatic repulsion between the polymer molecules, resulting in the TIr3 release and induction of cancer cell apoptosis.

Effect of Fluid-Rock Interactions on In Situ Bacterial Alteration of Interfacial Properties and Wettability of CO2-Brine-Mineral Systems for Geologic Carbon Storage.

This study explored the feasibility of biosurfactant amendment in modifying the interfacial characteristics of carbon dioxide (CO2) with rock minerals under high-pressure conditions for GCS. In particular, while varying the CO2 phase and the rock mineral, we quantitatively examined the production of biosurfactants by Bacillus subtilis and their effects on interfacial tension (IFT) and wettability in CO2-brine-mineral systems. The results demonstrated that surfactin produced by B. subtilis caused the reduction of CO2-brine IFT and modified the wettability of both quartz and calcite minerals to be more CO2-wet. The production yield of surfactin was substantially greater with the calcite mineral than with the quartz mineral. The calcite played the role of a pH buffer, consistently maintaining the brine pH above 6. By contrast, an acidic condition in CO2-brine-quartz systems caused the precipitation of surfactin, and hence surfactin lost its ability as a surface-active agent. Meanwhile, the CO2-driven mineral dissolution and precipitation in CO2-brine-calcite systems under a non-equilibrium system altered the solid substrates, produced surface roughness, and caused contact angle variations. These results provide unique experimental data on biosurfactant-mediated interfacial properties and wettability in GCS-relevant conditions, which support the exploitation of in situ biosurfactant production for biosurfactant-aided CO2 injection.

Effect of Electric Field on Gas Hydrate Nucleation Kinetics: Evidence for the Enhanced Kinetics of Hydrate Nucleation by Negatively Charged Clay Surfaces.

Natural gas hydrates are found widely in oceanic clay-rich sediments, where clay-water interactions have a profound effect on the formation behavior of gas hydrates. However, it remains unclear why and how natural gas hydrates are formed in clay-rich sediments in spite of factors that limit gas hydrate formation, such as small pore size and high salinity. Herein, we show that polarized water molecules on clay surfaces clearly promote gas hydrate nucleation kinetics. When water molecules were polarized with an electric field of 104 V/m, gas hydrate nucleation occurred significantly faster with an induction time reduced by 5.8 times. Further, the presence of strongly polarized water layers at the water-gas interface hindered gas uptake and thus hydrate formation, when the electric field was applied prior to gas dissolution. Our findings expand our understanding of the formation habits of naturally occurring gas hydrates in clay-rich sedimentary deposits and provide insights into gas production from natural hydrate deposits.

The emerging role of 4D synchrotron X-ray micro-tomography for climate and fossil energy studies: five experiments showing the present capabilities at beamline 8.3.2 at the Advanced Light Source.

Continuous improvements at X-ray imaging beamlines at synchrotron light sources have made dynamic synchrotron X-ray micro-computed tomography (SXR-µCT) experiments more routinely available to users, with a rapid increase in demand given its tremendous potential in very diverse areas. In this work a survey of five different four-dimensional SXR-µCT experiments is presented, examining five different parameters linked to the evolution of the investigated system, and tackling problems in different areas in earth sciences. SXR-µCT is used to monitor the microstructural evolution of the investigated sample with the following variables: (i) high temperature, observing in situ oil shale pyrolysis; (ii) low temperature, replicating the generation of permafrost; (iii) high pressure, to study the invasion of supercritical CO2 in deep aquifers; (iv) uniaxial stress, to monitor the closure of a fracture filled with proppant, in shale; (v) reactive flow, to observe the evolution of the hydraulic properties in a porous rock subject to dissolution. For each of these examples, it is shown how dynamic SXR-µCT was able to provide new answers to questions related to climate and energy studies, highlighting the significant opportunities opened recently by the technique.

An Iridium(III) Complex as a Photoactivatable Tool for Oxidation of Amyloidogenic Peptides with Subsequent Modulation of Peptide Aggregation.

Aggregates of amyloidogenic peptides are involved in the pathogenesis of several degenerative disorders. Herein, an iridium(III) complex, Ir-1, is reported as a chemical tool for oxidizing amyloidogenic peptides upon photoactivation and subsequently modulating their aggregation pathways. Ir-1 was rationally designed based on multiple characteristics, including 1) photoproperties leading to excitation by low-energy radiation; 2) generation of reactive oxygen species responsible for peptide oxidation upon photoactivation under mild conditions; and 3) relatively easy incorporation of a ligand on the IrIII center for specific interactions with amyloidogenic peptides. Biochemical and biophysical investigations illuminate that the oxidation of representative amyloidogenic peptides (i.e., amyloid-ß, α-synuclein, and human islet amyloid polypeptide) is promoted by light-activated Ir-1, which alters the conformations and aggregation pathways of the peptides. Additionally, their potential oxidation sites are identified as methionine, histidine, or tyrosine residues. Overall, our studies on Ir-1 demonstrate the feasibility of devising metal complexes as chemical tools suitable for elucidating the nature of amyloidogenic peptides at the molecular level, as well as controlling their aggregation.

Endoplasmic Reticulum-Localized Iridium(III) Complexes as Efficient Photodynamic Therapy Agents via Protein Modifications.

Protein inactivation by reactive oxygen species (ROS) such as singlet oxygen ((1)O2) and superoxide radical (O2(•-)) is considered to trigger cell death pathways associated with protein dysfunction; however, the detailed mechanisms and direct involvement in photodynamic therapy (PDT) have not been revealed. Herein, we report Ir(III) complexes designed for ROS generation through a rational strategy to investigate protein modifications by ROS. The Ir(III) complexes are effective as PDT agents at low concentrations with low-energy irradiation (≤ 1 J cm(-2)) because of the relatively high (1)O2 quantum yield (> 0.78), even with two-photon activation. Furthermore, two types of protein modifications (protein oxidation and photo-cross-linking) involved in PDT were characterized by mass spectrometry. These modifications were generated primarily in the endoplasmic reticulum and mitochondria, producing a significant effect for cancer cell death. Consequently, we present a plausible biologically applicable PDT modality that utilizes rationally designed photoactivatable Ir(III) complexes.

Phosphorescent sensor for phosphorylated peptides based on an iridium complex.

A bis[(4,6-difluorophenyl)pyridinato-N,C(2')]iridium(III) picolinate (FIrpic) derivative coupled with bis(Zn(2+)-dipicolylamine) (ZnDPA) was developed as a sensor (1) for phosphorylated peptides, which are related to many cellular mechanisms. As a control, a fluorescent sensor (2) based on anthracene coupled to ZnDPA was also prepared. When the total negative charge on the phosphorylated peptides was changed to -2, -4, and -6, the emission intensity of sensor 1 gradually increased by factors of up to 7, 11, and 16, respectively. In contrast, there was little change in the emission intensity of sensor 1 upon the addition of a neutral phosphorylated peptide, non-phosphorylated peptides, or various anions such as CO3(2-), NO3(-), SO4(2-), phosphate, azide, and pyrophosphate. Furthermore, sensor 1 could be used to visually discriminate between phosphorylated peptides and adenosine triphosphate in aqueous solution under a UV-vis lamp, unlike fluorescent sensor 2. This enhanced luminance of phosphorescent sensor 1 upon binding to a phosphorylated peptide is attributed to a reduction in the repulsion between the Zn(2+) ions due to the phenoxy anion, its strong metal-to-ligand charge transfer character, and a reduction in self-quenching.

Multi-source remote sensing-based landslide investigation: the case of the August 7, 2020, Gokseong landslide in South Korea.

Landslides pose a growing concern worldwide, emphasizing the need for accurate prediction and assessment to mitigate their impact. Recent advancements in remote sensing technology offer unprecedented datasets at various scales, yet practical applications demand further case studies to fully integrate these technologies into landslide analysis. This study presents a case study approach to fully leverage variety of multi-source remote sensing technologies for analyzing the characteristics of a landslide. The selected case is a landslide with a long runout debris flow that occurred in Gokseong County, South Korea, on August 7, 2020. The chosen multi-source technologies encompass digital photogrammetry using RGB and multi-spectral imageries, 3D point clouds acquired by light detection and ranging (LiDAR) mounted on an unmanned aerial vehicle (UAV), and satellite interferometric synthetic aperture radar (InSAR). The satellite InSAR analysis identifies the initial displacement, triggered by rainfall and later transforming into a debris flow. The utilization of digital photogrammetry, employing UAV-RGB and multi-spectral image data, precisely delineates the extent affected by the landslide. The landslide encompassed a runout distance of 678 m, featuring an initiation zone characterized by an average slope of 35°. Notably, the eroded and deposited areas measured 2.55 × 104 m2 and 1.72 × 104 m2, respectively. The acquired UAV-LiDAR data further reveal the eroded and deposited landslide volumes approximately measuring 5.60 × 104 m3 and 1.58 × 104 m3, respectively. This study contributes a valuable dataset on a rainfall-induced landslide with a long runout debris flow, underscoring the effectiveness of multi-source remote sensing technology in monitoring and comprehending complex landslide events.

Amine-Rich Hydrogels for Molecular Nanoarchitectonics of Photosystem II and Inverse Opal TiO2 toward Solar Water Oxidation.

Solar water oxidation is a crucial process in light-driven reductive synthesis, providing electrons and protons for various chemical reductions. Despite advances in light-harvesting materials and cocatalysts, achieving high efficiency and stability remains challenging. In this study, we present a simple yet effective strategy for immobilizing natural photosystems (PS) made of abundant and inexpensive elements, using amine-rich polyethylenimine (PEI) hydrogels, to fabricate organic/inorganic hybrid photoanodes. Natural PS II extracted from spinach was successfully immobilized on inverse opal TiO2 photoanodes in the presence of PEI hydrogels, leading to greatly enhanced solar water oxidation activity. Photoelectrochemical (PEC) analyses reveal that PS II can be immobilized in specific orientations through electrostatic interactions between the positively charged amine groups of PEI and the negatively charged stromal side of PS II. This specific orientation ensures efficient photogenerated charge separation and suppresses undesired side reactions such as the production of reactive oxygen species. Our study provides an effective immobilization platform and sheds light on the potential utilization of PS II in PEC water oxidation.

Oxidative photocatalysis on membranes triggers non-canonical pyroptosis.

Intracellular membranes composing organelles of eukaryotes include membrane proteins playing crucial roles in physiological functions. However, a comprehensive understanding of the cellular responses triggered by intracellular membrane-focused oxidative stress remains elusive. Herein, we report an amphiphilic photocatalyst localised in intracellular membranes to damage membrane proteins oxidatively, resulting in non-canonical pyroptosis. Our developed photocatalysis generates hydroxyl radicals and hydrogen peroxides via water oxidation, which is accelerated under hypoxia. Single-molecule magnetic tweezers reveal that photocatalysis-induced oxidation markedly destabilised membrane protein folding. In cell environment, label-free quantification reveals that oxidative damage occurs primarily in membrane proteins related to protein quality control, thereby aggravating mitochondrial and endoplasmic reticulum stress and inducing lytic cell death. Notably, the photocatalysis activates non-canonical inflammasome caspases, resulting in gasdermin D cleavage to its pore-forming fragment and subsequent pyroptosis. These findings suggest that the oxidation of intracellular membrane proteins triggers non-canonical pyroptosis.

Unveiling the Power of Cloaking Metal-Organic Framework Platforms via Supramolecular Antibody Conjugation.

Targeted drug delivery systems based on metal-organic frameworks (MOFs) have progressed tremendously since inception and are now widely applicable in diverse scientific fields. However, translating MOF agents directly to targeted drug delivery systems remains a challenge due to the biomolecular corona phenomenon. Here, we observed that supramolecular conjugation of antibodies to the surface of MOF particles (MOF-808) via electrostatic interactions and coordination bonding can reduce protein adhesion in biological environments and show stealth shields. Once antibodies are stably conjugated to particles, they were neither easily exchanged with nor covered by biomolecule proteins, which is indicative of the stealth effect. Moreover, upon conjugation of the MOF particle with specific targeted antibodies, namely, anti-CD44, human epidermal growth factor receptor 2 (HER2), and epidermal growth factor receptor (EGFR), the resulting hybrid exhibits an augmented targeting efficacy toward cancer cells overexpressing these receptors, such as HeLa, SK-BR-3, and 4T1, as evidenced by flow cytometry. The therapeutic effectiveness of the antibody-conjugated MOF (anti-M808) was further evaluated through in vivo imaging and the assessment of tumor inhibition effects using IR-780-loaded EGFR-M808 in a 4T1 tumor xenograft model employing nude mice. This study therefore provides insight into the use of supramolecular antibody conjugation as a promising method for developing MOF-based drug delivery systems.

Photophysics and aggregation effects of a triphenylamine-based dye sensitizer on metal-oxide nanoparticles suspended in an ion trap.

The photophysical behaviour of a triphenylamine-based organic dye sensitizer (Carbz-PAHTDTT) attached to alumina and titania nanoparticles (labelled Carbz-Al and Carbz-Ti, respectively) is examined in the absence and presence of the chenodeoxycholic acid (CDCA) coadsorber. The experiments are conducted in vacuo by suspending the target dye-sensitized nanoparticles within a quadrupole ion trap, where they are probed with laser radiation to obtain emission spectra and time-resolved excited state decay curves. For Carbz-Al, the dye's emission band is blue-shifted and the excited state lifetime is increased upon the coabsorption of CDCA, effects attributed to reduced dye aggregation. Compared to Carbz-Al, the Carbz-Ti excited state lifetimes are significantly shorter due to excited dye molecules injecting electrons into the titania conduction band. For Carbz-Ti, the electron injection quantum yields for the surfaces with CDCA (CDCA : dye = 25 : 1) and without CDCA are estimated to be 0.87 and 0.71, respectively. The gas-phase results demonstrate that Carbz-PAHTDTT dye aggregates are detrimental to the performance of a dye-sensitized solar cell.

Acquisition of high-resolution topographic information in forest environments using integrated UAV-LiDAR system: System development and field demonstration.

High-resolution topographic information of landslide-prone areas plays an important role in accurate prediction and characterization of potential landslides and mitigation of landslides-associated hazards. This study presents an advanced geomorphological surveying system that integrates the light detection and ranging (LiDAR) with an unmanned aerial vehicle (UAV), a multi-rotor aerial vehicle in specific, for prediction, monitoring and forensic analysis of landslides, and for maintenance of debris-flow barriers. The test-flight over a vegetated area demonstrates that the integrated UAV-LiDAR system can provide high-resolution, three-dimensional (3D) LiDAR point clouds below canopy and vegetation in forest environments, overcoming the limitation of aerial photogrammetry and terrestrial LiDAR platforms. An algorithm is suggested to delineate the topographic information from the acquired 3D LiDAR point clouds, and the accuracy and performance of the developed UAV-LiDAR system are examined through field demonstration. Finally, two field demonstrations are presented: the forensic analysis of the recent Gokseong landslide event, and the sediment deposition monitoring for debris-flow barrier maintenance in South Korea. The developed surveying system is expected to contribute to geomorphological field surveys in vegetated, forest environments, particularly in a site that is not easily accessible.

Influence of the Lithium-Ion Concentration in Electrolytes on the Performance of Dye-Sensitized Photorechargeable Batteries.

Dye-sensitized photorechargeable batteries (DSPBs) have recently gained attention for realizing energy recycling systems under dim light conditions. However, their performance under high storage efficiency (i.e., the capacity charged within a limited time) for practical application remains to be evaluated. Herein, we varied the lithium (Li)-ion concentration, which plays a dual role as energy charging and storage components, to obtain the optimized energy density of DSPBs. Electrochemical studies showed that the Li-ion concentration strongly affected the resistance characteristics of DSPBs. In particular, increasing the Li-ion concentration improved the output capacity and decreased the output voltage. Consequently, the energy density of the finely optimized DSPB improved from 8.73 to 12.64 mWh/cm3 when irradiated by a 1000-lx indoor light-emitting-diode lamp. These findings on the effects of Li-ion concentrations in electrolytes on the performance of DSPBs represent a step forward in realizing the practical application of DSPBs.

Singlet Oxygen Generation from Polyaminoglycerol by Spin-Flip-Based Electron Transfer.

Reactive oxygen species have drawn attention owing to their strong oxidation ability. In particular, the singlet oxygen (1O2) produced by energy transfer is the predominant species for controlling oxidation reactions efficiently. However, conventional 1O2 generators, which rely on enhanced energy transfer, frequently suffer from poor solubility, low stability, and low biocompatibility. Herein, we introduce a hyperbranched aliphatic polyaminoglycerol (hPAG) as a 1O2 generator, which relies on spin-flip-based electron transfer. The coexistence of a lone pair electron on the nitrogen atom and a hydrogen-bonding donor (the protonated form of nitrogen and hydroxyl group) affords proximity between hPAG and O2. Subsequent direct electron transfer after photo-irradiation induces hPAG•+-O2 •- formation, and the following spin-flip process generates 1O2. The spin-flip-based electron transfer pathway is analyzed by a series of photophysical, electrochemical, and computational studies. The 1O2 generator, hPAG, is successfully employed in photodynamic therapy and as an antimicrobial reagent.

Dithienothiophene (DTT)-based dyes for dye-sensitized solar cells: synthesis of 2,6-dibromo-DTT.

A one-pot synthesis of 2,6-dibromodithieno[3,2-b;2',3'-d]thiophene (dibromo-DTT, 4) was developed. A key step was bromodecarboxylation of DTT-2,6-dicarboxylic acid, obtained by saponification of the diester 1. The donor-acceptor dye DAHTDTT (13), based on a central 2,6-bis[2'-(3'-hexylthienyl)]dithieno[3,2-b;2',3'-d]thiophene core (9), was prepared and incorporated in a dye-sensitized solar cell (DSC), which exhibited an energy conversion efficiency of 7.3% with V(oc) of 697 mV, J(sc) of 14.4 mA/cm(2), and ff of 0.73 at 1 sun.