Advances in Nonreactive Polymer Compatibilizers for Commodity Polyolefin Blends.

Recycling mixed polyolefin plastics is a significant challenge due to the limitations in sorting and degraded mechanical properties of blends. Nonreactive compatibilization by adding a small amount of polymeric additive is a widespread approach to restoring the performance and value of recycled plastics. Over the past several decades, synthetic advances have enabled access to low-cost copolymers and precision architectures for deepening the understanding of compatibilization mechanisms in semicrystalline polyolefins. This review covers the design parameters of a polymeric compatibilizer, the testing of blends, the synthetic methods of producing economically viable additives, and surveys the literature of blends of compatibilized HDPE, LLDPE, LDPE, and iPP. From this, readers should gain a comprehension of the polymer mechanics, synthesis, and macromolecular engineering of processable polyolefin blends, along with the field's future directions.

Highly Enantioselective Polymerization of ß-Butyrolactone by a Bimetallic Magnesium Catalyst: An Interdependent Relationship Between Favored and Unfavored Enantiomers.

Herein, we report that (S,S)-prophenolMg2(µ-OnBu)(THF)2 ((S,S)-1, prophenol = (S,S)-2,6-bis[2-(hydroxydiphenylmethyl)pyrrolidin-1-ylmethyl]-4-methylphenol) is a highly enantioselective (kR/kS = 140) precatalyst for ring-opening polymerization of rac-ß-butyrolactone (ß-BL) to isotactic poly(3-hydroxybutyrate) (i-PHB), a high performance, biodegradable polyester. Precatalyst (S,S)-1 polymerizes (R)-ß-BL with an inversion of stereochemistry to (S)-PHB with a m% (percentage of adjacent linkages with a meso configuration) of 98% at 41% conversion and Tm of 165 °C under a variety of conditions. Complex (S,S)-1 demonstrates unique polymerization kinetics, as it does not polymerize the preferred enantiomer, (R)-ß-BL, alone. Mechanistic studies revealed that (S)-ß-BL is needed to convert (S,S)-1 into the active enantioselective polymerization catalyst. To the best of our knowledge, (S,S)-1 produces i-PHB with the highest degree of isotacticity observed from a polymerization of rac-ß-BL. This study informs the design and understanding of future enantioselective and earth-abundant metal catalysts for ring-opening polymerization of ß-lactones.

Atactic, Isotactic, and Syndiotactic Methylated Polyhydroxybutyrates: An Unexpected Series of Isomorphic Polymers.

Polyhydroxyalkanoates (PHAs), such as poly[(R)-3-hydroxybutyrates] [(R)-P3HB], are produced by bacteria and are promising alternatives to nondegradable polyolefin plastics, but their semicrystallinity and high melting points are only maintained at high tacticity, which are commonly seen in other semicrystalline polymers like isotactic polypropylene (iPP). We herein report a class of synthetic PHAs, cis-poly(3-hydroxy-2-methylbutyrate)s (cis-PHMBs), that exhibit tacticity-independent semicrystallinity. The syndiotactic, isotactic, and even atactic PHMBs all share high melting points (Tm > 170 °C) and nearly identical crystal structures. The isomorphism of these polymers across three different tacticities has allowed access to iPP-like, high-performance PHMB without the requirement of high tacticity.

Zirconium-Catalyzed C-H Alumination of Polyolefins, Paraffins, and Methane.

C-H/Et-Al exchange in zirconium-catalyzed reactions of saturated hydrocarbons and AlEt3 affords versatile organoaluminum compounds and ethane. The grafting of commercially available Zr(OtBu)4 on silica/alumina gives monopodal ≡SiO-Zr(OtBu)3 surface pre-catalyst sites that are activated in situ by ligand exchange with AlEt3. The catalytic C-H alumination of dodecane at 150 °C followed by quenching in air affords n-dodecanol as the major product, revealing selectivity for methyl group activation. Shorter hydrocarbon or alcohol products were not detected under these conditions. Catalytic reactions of cyclooctane and AlEt3, however, afford ring-opened products, indicating that C-C bond cleavage occurs readily in methyl group-free reactants. This selectivity for methyl group alumination enables the C-H alumination of polyethylenes, polypropylene, polystyrene, and poly-α-olefin oils without significant chain deconstruction. In addition, the smallest hydrocarbon, methane, undergoes selective mono-alumination under solvent-free catalytic conditions, providing a direct route to Al-Me species.

Polyethylene Incorporating Diels-Alder Comonomers: A "Trojan Horse" Strategy for Chemically Recyclable Polyolefins.

Polyolefins with periodic unsaturation in the backbone chain are sought after for synthesizing chemically recyclable polymers or telechelic polyolefin macromonomers. Here we introduce a bottom-up synthesis of unsaturated high-density polyethylene (HDPE) via copolymerization of ethylene with dimethyl 7-oxabicyclo[2.2.1]hepta-2,5-diene-3,5-dicarboxylate followed by post-polymerization retro-Diels-Alder to unveil hidden double bonds in the polymer backbone. The incorporation of this "Trojan Horse" comonomer was varied and a series of unsaturated HDPE polymers with block lengths of 1.2, 1.9, and 3.5 kDa between double bonds was synthesized. Cross metathesis of unsaturated HDPE samples with 2-hydroxyethyl acrylate yielded telechelic ester terminated PE macromonomers suitable for the preparation of ester-linked PE. These materials were depolymerized and repolymerized, making them suitable candidates for chemical recycling. The ester-linked PE displayed thermal and mechanical properties comparable to commercial HDPE.

Chemically Recyclable Ester-Linked Polypropylene.

Polyolefins represent the largest class of commodity materials due to their excellent material properties; however, they have limited pathways to chemical recycling and are often difficult to mechanically recycle. Here we demonstrate a new catalyst for the isoselective copolymerization of propylene and butadiene capable of favoring 1,4-insertion over 1,2-insertion while maintaining good molecular weights and turnover frequencies. This isotactic propylene copolymer with main-chain unsaturation was depolymerized to a telechelic macromonomer using an olefin metathesis catalyst and 2-hydroxyethyl acrylate. After hydrogenation, the telechelic macromonomer was repolymerized to form an ester-linked polypropylene material. This polymer shows thermal and mechanical properties comparable to linear low-density polyethylene. Finally, the telechelic macromonomer could be regenerated through the depolymerization of the ester-linked polypropylene material, which allows for the chemical recycling to macromonomer. This process provides a route to transform partially unsaturated polyolefins to chemically recyclable materials with similar properties to their parent polymers.

Catalytic Chemical Recycling of Post-Consumer Polyethylene.

Among commercial plastics, polyolefins are the most widely produced worldwide but have limited recyclability. Here, we report a chemical recycling route for the conversion of post-consumer high-density polyethylene (HDPE) into telechelic macromonomers suitable for circular reprocessing. Unsaturation was introduced into HDPE by catalytic dehydrogenation using an Ir-POCOP catalyst without an alkene acceptor. Cross-metathesis with 2-hydroxyethyl acrylate followed by hydrogenation transformed the partially unsaturated HDPE into telechelic macromonomers. The direct repolymerization of the macromonomers gave a brittle material due to the low overall weight-average molecular weight. Aminolysis of telechelic macromonomers with a small amount of diethanolamine increased the overall functionality. The resulting macromonomers were repolymerized through transesterification to generate a polymer with comparable mechanical properties to the starting post-consumer HDPE waste. Depolymerization of the repolymerized material catalyzed by an organic base regenerated the telechelic macromonomers, thereby allowing waste polyethylene materials to enter a chemical recycling pathway.

Size-Controlled Nanoparticles Embedded in a Mesoporous Architecture Leading to Efficient and Selective Hydrogenolysis of Polyolefins.

A catalytic architecture, comprising a mesoporous silica shell surrounding platinum nanoparticles (NPs) supported on a solid silica sphere (mSiO2/Pt-X/SiO2; X is the mean NP diameter), catalyzes hydrogenolysis of melt-phase polyethylene (PE) into a narrow C23-centered distribution of hydrocarbons in high yield using very low Pt loadings (∼10-5 g Pt/g PE). During catalysis, a polymer chain enters a pore and contacts a Pt NP where the C-C bond cleavage occurs and then the smaller fragment exits the pore. mSiO2/Pt/SiO2 resists sintering or leaching of Pt and provides high yields of liquids; however, many structural and chemical effects on catalysis are not yet resolved. Here, we report the effects of Pt NP size on activity and selectivity in PE hydrogenolysis. Time-dependent conversion and yields and a lumped kinetics model based on the competitive adsorption of long vs short chains reveal that the activity of catalytic material is highest with the smallest NPs, consistent with a structure-sensitive reaction. Remarkably, the three mSiO2/Pt-X/SiO2 catalysts give equivalent selectivity. We propose that mesoscale pores in the catalytic architecture template the C23-centered distribution, whereas the active Pt sites influence the carbon-carbon bond cleavage rate. This conclusion provides a framework for catalyst design by separating the C-C bond cleavage activity at catalytic sites from selectivity for chain lengths of the products influenced by the structure of the catalytic architecture. The increased activity, selectivity, efficiency, and lifetime obtained using this architecture highlight the benefits of localized and confined environments for isolated catalytic particles under condensed-phase reaction conditions.

Topical Treatment of Psoriasis Vulgaris: The Swiss Treatment Pathway.

Topical treatment is crucial for the successful management of plaque psoriasis. Topicals are used either as a stand-alone therapy for mild psoriasis or else in combination with UV or systemic treatment for moderate-to-severe disease. For the choice of a suitable topical treatment, the formulation matters and not just the active substances. This expert opinion paper was developed via a non-structured consensus process by Swiss dermatologists in hospitals and private practices to illustrate the current treatment options to general practitioners and dermatologists in Switzerland. Defining treatment goals together with the patient is crucial and increases treatment adherence. Patients' personal preferences and pre-existing experiences should be considered and their satisfaction with treatment and outcome regularly assessed. During the induction phase of "classical" mild-to-moderate psoriasis, the fixed combination of topical calcipotriol (Cal) 50 µg/g and betamethasone dipropionate (BD) 0.5 mg/g once daily is frequently used for 4-8 weeks. During the maintenance phase, a twice weekly (proactive) management has proved to reduce the risk of relapse. Of the fixed combinations, Cal/BD aerosol foam is the most effective formulation. However, the individual choice of formulation should be based on a patient's preference and the location of the psoriatic plaques. Tailored recommendations are given for the topical management of specific areas (scalp, facial, intertriginous/genital, or palmoplantar lesions), certain symptoms (hyperkeratotic or hyperinflammatory forms) as well as during pregnancy or a period of breastfeeding. As concomitant basic therapy, several emollients are recommended. If topical treatment alone does not appear to be sufficient, the regimen should be escalated according to the Swiss S1-guideline for the systemic treatment of psoriasis.

Regioselective Carbonylation of 2,2-Disubstituted Epoxides: An Alternative Route to Ketone-Based Aldol Products.

We report the regioselective carbonylation of 2,2-disubstituted epoxides to ß,ß-disubstituted ß-lactones. Mechanistic studies revealed epoxide ring-opening as the turnover limiting step, an insight that facilitated the development of improved reaction conditions using weakly donating, ethereal solvents. A wide range of epoxides can be carbonylated to ß-lactones, which are subsequently ring-opened to produce ketone-based aldol adducts, providing an alternative to the Mukaiyama aldol reaction. Enantiopure epoxides were demonstrated to undergo the carbonylation/ring-opening process with retention of stereochemistry to form enantiopure ß-hydroxy esters.

Architectural Control of Isosorbide-Based Polyethers via Ring-Opening Polymerization.

Isosorbide is a rigid, sugar-derived building block that has shown promise in high-performance materials, albeit with a lack of available controlled polymerization methods. To this end, we provide mechanistic insights into the cationic and quasi-zwitterionic ring-opening polymerization (ROP) of an annulated isosorbide derivative (1,4:2,5:3,6-trianhydro-d-mannitol, 5). Ring-opening selectivity of this tricyclic ether was achieved, and the polymerization is selectively directed toward different macromolecular architectures, allowing for formation of either linear or cyclic polymers. Notably, straightforward recycling of unreacted monomer can be accomplished via sublimation. This work provides the first platform for tailored polymer architectures from isosorbide via ROP.

Swiss Practice Recommendations for the Management of Hidradenitis Suppurativa/Acne Inversa.

Hidradenitis suppurativa (HS) is a painful, inflammatory, debilitating skin disease with a chronic intermittent course. The central pathogenetic event seems to be the occlusion of the hair follicle. HS has a 1-year prevalence of about 1%. It typically presents after puberty with painful, deep-seated, inflamed lesions in the apocrine gland-bearing areas of the body: most commonly the axillae, inguinal, and anogenital regions. HS has a high negative impact on patients' quality of life even in patients with only limited disease burden, and the diagnosis of HS is often made with a long diagnostic delay. In this practical short version we present diagnostic and therapeutic recommendations which are based on a systematic literature search as well as an informal expert consensus of Swiss dermatologists and dermatosurgeons.

Regioselective Isomerization of 2,3-Disubstituted Epoxides to Ketones: An Alternative to the Wacker Oxidation of Internal Alkenes.

We report an alternative pathway to the Wacker oxidation of internal olefins involving epoxidation of trans-alkenes followed by a mild and highly regioselective isomerization to give the major ketone isomers in 66-98% yield. Preliminary kinetics and isotope labeling studies suggest epoxide ring opening as the turnover limiting step in our proposed mechanism. A similar catalytic system was applied to the kinetic resolution of select trans-epoxides to give synthetically useful selectivity factors of 17-23 for benzyl-substituted substrates.

Secondary alkene insertion and precision chain-walking: a new route to semicrystalline "polyethylene" from α-olefins by combining two rare catalytic events.

While traditional polymerization of linear α-olefins (LAOs) typically provides amorphous, low T(g) polymers, chain-straightening polymerization represents a route to semicrystalline materials. A series of α-diimine nickel catalysts were tested for the polymerization of various LAOs. Although known systems yielded amorphous or low-melting polymers, the "sandwich" α-diimines 3-6 yielded semicrystalline "polyethylene" comprised primarily of unbranched repeat units via a combination of uncommon regioselective 2,1-insertion and precision chain-walking events.

Measurement of extreme hyperfine fields in two-coordinate high-spin Fe2+ complexes by Mössbauer spectroscopy: essentially free-ion magnetism in the solid state.

Mössbauer studies of three two-coordinate linear high-spin Fe(2+) compounds, namely, Fe{N(SiMe3)(Dipp)}2 (1) (Dipp = C6H3-2,6-(i)Pr2), Fe(OAr')2 (2) [Ar' = C6H3-2,6-(C6H3-2,6-(i)Pr2)2], and Fe{C(SiMe3)3}2 (3), are presented. The complexes were characterized by zero- and applied-field Mössbauer spectroscopy (1-3), as well as zero- and applied-field heat-capacity measurements (3). As 1-3 are rigorously linear, the distortion(s) that might normally be expected in view of the Jahn-Teller theorem need not necessarily apply. We find that the resulting very large unquenched orbital angular momentum leads to what we believe to be the largest observed internal magnetic field to date in a high-spin iron(II) compound, specifically +162 T in 1. The latter field is strongly polarized along the directions of the external field for both longitudinal and transverse field applications. For the longitudinal case, the applied field increases the overall hyperfine splitting consistent with a dominant orbital contribution to the effective internal field. By contrast, 2 has an internal field that is not as strongly polarized along a longitudinally applied field and is smaller in magnitude at ca. 116 T. Complex 3 behaves similarly to complex 1. They are sufficiently self-dilute (e.g., Fe···Fe distances of ca. 9-10 Å) to exhibit varying degrees of slow paramagnetic relaxation in zero field for the neat solid form. In the absence of EPR signals for 1-3, we show that heat-capacity measurements for one of the complexes (3) establish a geff value near 12, in agreement with the principal component of the ligand electric field gradient being coincident with the z axis.

Enantioselective polymerization of epoxides using biaryl-linked bimetallic cobalt catalysts: a mechanistic study.

The enantioselective polymerization of propylene oxide (PO) using biaryl-linked bimetallic salen Co catalysts was investigated experimentally and theoretically. Five key aspects of this catalytic system were examined: (1) the structural features of the catalyst, (2) the regio- and stereoselectivity of the chain-growth step, (3) the probable oxidation and electronic state of Co during the polymerization, (4) the role of the cocatalyst, and (5) the mechanism of monomer enchainment. Several important insights were revealed. First, density functional theory (DFT) calculations provided detailed structural information regarding the regio- and stereoselective chain-growth step. Specifically, the absolute stereochemistry of the binaphthol linker determines the enantiomer preference in the polymerization, and the interaction between the salen ligand and the growing polymer chain is a fundamental aspect of enantioselectivity. Second, a new bimetallic catalyst with a conformationally flexible biphenol linker was synthesized and found to enantioselectively polymerize PO, though with lower enantioselectivity than the binaphthol linked catalysts. Third, DFT calculations revealed that the active form of the catalyst has two active exo anionic ligands (chloride or carboxylate) and an endo polymer alkoxide which can ring-open an adjacent cobalt-coordinated epoxide. Fourth, calculations showed that initiation is favored by an endo chloride ligand, while propagation is favored by the presence of two exo carboxylate ligands.

Nature-inspired methylated polyhydroxybutyrates from C1 and C4 feedstocks.

Polyolefin plastics are widely used due to their low cost and outstanding properties, but their environmental persistence presents a major societal challenge. Polyhydroxyalkanoates (PHA) are biodegradable substitutes for polyolefins, but their high cost and thermal instability are impediments to their widespread application. Here we report a series of methylated polyhydroxybutyrates, poly(3-hydroxy-2-methylbutyrate)s, which are structurally inspired by natural PHAs. The cis homopolymers exhibit tacticity-independent crystallinity, which allows for the discovery of high-melting, thermally stable and mechanically tough copolymers, and a full range of polyolefin-like properties can be further achieved by tailoring the cis/trans ratio of the repeating units. Moreover, these materials can be synthesized from inexpensive carbon monoxide and 2-butene feedstocks, and they can be chemically recycled or upcycled at their end of life. The versatile properties, abundant feedstocks and end-of-life utility of this family of polyesters will enable a powerful platform for the discovery of sustainable alternatives to polyolefin plastics.

Double-resonance 17O NMR experiments reveal unique configurational information for surface organometallic complexes.

Obtaining three-dimensional (3D) configurational information of surface organometallic complexes is a persistent challenge due to the low spatial sensitivity of most spectroscopic methods. We show that employing 17O-enriched supports enables highly informative multidimensional NMR experiments, including radial and vertical distance measurements, that can be used to elucidate site geometry.

Transition from child to adult health care for patients with lysosomal storage diseases in France: current status and priorities-the TENALYS study, a patient perspective survey.

BACKGROUND: Transition from childhood to adulthood (TCA) is usually difficult in rare, progressive and multisystemic diseases. New treatments and modalities of care for many lysosomal diseases (LD) can increase life expectancy, and a successful TCA can help patient who reach adulthood to avoid disruption to health care. In France, some TCA initiatives have been taken by referral centers but in view of the problems encountered by Vaincre les Maladies Lysosomales (VML), the LD patient association, they seem to be insufficient. The aim of this study is to determine the current state of the TCA process and to identify actions to improve it through interviews with patient families and physicians in LD referral centers. The study is based upon an observational, non-interventional, cross-sectional, national survey which used two anonymous questionnaires. These questionnaires, developed by a scientific committee including representatives from VML and medical specialists in LD, were sent to patients who were receiving care in pediatric departments at age 15 years or older. Questionnaires were also sent to their referral pediatricians. RESULTS: Fifty-four patients were included. Forty-two questionnaires were completed by patients and their corresponding physicians and 12 were completed by physicians only. The majority of the patients (80%) were informed that transfer to adult healthcare would occur, but 52% were informed after their eighteenth birthday. Forty-eight percent indicated that they were informed that a TCA coordinator would be appointed; for 39% the time frame for the transfer was communicated, and 31% were informed of the composition of the adult medical team. Among the actions that patients rated as "important/very important", and considered to be a priority in their comments, the most frequently cited were the provision of explanatory documents on the TCA (94%), the transmission of the medical file from the pediatric sector to the adult sector (94%) and a joint consultation with both pediatrician and adult unit physician (91%). Physicians were in agreement concerning the primary importance of the last two actions. CONCLUSION: This study provides a basis for the deployment, on the national level, of transition programs which include specific actions that patients view as priorities.