RESUMEN
A key resource in quantum-secured communication protocols are single photon emitters. For long-haul optical networks, it is imperative to use photons at wavelengths compatible with telecom single mode fibers. We demonstrate high purity single photon emission at 1.31 µm using deterministically positioned InP photonic waveguide nanowires containing single InAsP quantum dot-in-a-rod structures. At excitation rates that saturate the emission, we obtain a single photon collection efficiency at first lens of 27.6% and a probability of multiphoton emission of g(2)(0) = 0.021. We have also evaluated the performance of the source as a function of temperature. Multiphoton emission probability increases with temperature with values of 0.11, 0.34, and 0.57 at 77, 220 and 300 K, respectively, which is attributed to an overlap of temperature-broadened excitonic emission lines. These results are a promising step toward scalably fabricating telecom single photon emitters that operate under relaxed cooling requirements.
RESUMEN
Photonics-based quantum information technologies require efficient, high emission rate sources of single photons. Position-controlled quantum dots embedded within a broadband nanowire waveguide provide a fully scalable route to fabricating highly efficient single-photon sources. However, emission rates for single-photon devices are limited by radiative recombination lifetimes. Here, we demonstrate a multiplexed single-photon source based on a multidot nanowire. Using epitaxially grown nanowires, we incorporate multiple energy-tuned dots, each optimally positioned within the nanowire waveguide, providing single photons with high efficiency. This linear scaling of the single-photon emission rate with number of emitters is demonstrated using a five-dot nanowire with an average multiphoton emission probability of <4% when excited at saturation. This represents the first ever demonstration of multiple single-photon emitters deterministically incorporated in a single photonic device and is a major step toward achieving GHz single-photon emission rates from a scalable multi-quantum-dot system.
RESUMEN
It has been known for many years that during filamentation of femtosecond light pulses in air, gain is observed on the B to X transition in N_{2}^{+}. While the gain mechanism remains unclear, it has been proposed that recollision, a process that is fundamental to much of strong field science, is critical for establishing gain. We probe this hypothesis by directly comparing the influence of the ellipticity of the pump light on gain in air filaments. Then, we decouple filamentation from gain by measuring the gain in a thin gas jet that we also use for high harmonic generation. The latter allows us to compare the dependence of the gain on the ellipticity of the pump with the dependence of the high harmonic signal on the ellipticity of the fundamental. We find that gain and harmonic generation have very different behavior in both filaments and in the jet. In fact, in a jet we even measure gain with circular polarization. Thus, we establish that recollision does not play a significant role in creating the inversion.
RESUMEN
We report on a platform for the production of single photon devices with a fabrication yield of 100%. The sources are based on InAsP quantum dots embedded within position-controlled bottom-up InP nanowires. Using optimized growth conditions, we produce large arrays of structures having highly uniform geometries. Collection efficiencies are as high as 83% and multiphoton emission probabilities as low as 0.6% with the distribution away from optimal values associated with the excitation of other charge complexes and re-excitation processes, respectively, inherent to the above-band excitation employed. Importantly, emission peak lineshapes have Lorentzian profiles indicating that linewidths are not limited by inhomogeneous broadening but rather pure dephasing, likely elastic carrier-phonon scattering due to a high phonon occupation. This work establishes nanowire-based devices as a viable route for the scalable fabrication of efficient single photon sources and provides a valuable resource for hybrid on-chip platforms currently being developed.