RESUMEN
Density functional theory (DFT) calculations of hydrogen adsorption on titanium nitride had previously shown that hydrogen may adsorb on both titanium and nitrogen sites with a moderate adsorption energy. Further, the diffusion barrier was also found to be low. These findings may qualify TiN, a versatile multifunctional material with electronic conductivity, as an electrode material for the hydrogen evolution reaction (HER). This was the main impetus of this study, which aims to experimentally and theoretically investigate the electrocatalytic properties of TiN layers that were processed on a Ti substrate using reactive ion sputtering. The properties are discussed, focusing on the role of oxygen defects introduced during the sputtering process on the HER. Based on DFT calculations, it is shown that these oxygen defects alter the electronic environment of the Ti atoms, which entails a low hydrogen adsorption energy in the range of -0.1 eV; this leads to HER performances that match those of Pt-NPs in acidic media. When a few nanometer-thick layers of Pd-NPs are sputtered on top of the TiN layer, the performance is drastically reduced. This is interpreted in terms of oxygen defects being scavenged by the Pd-NPs near the surface, which is thought to reduce the hydrogen adsorption sites.
RESUMEN
Ordered thin films of Au nanorods (NRs) on Ti/Au/Si heterostructure substrates are electrodeposited in thin film aluminum oxide templates and, after template removal, serve as supports for Pd and Pt nanocatalysts. Based on previous work which showed a better electrocatalytic performance for layered Au/Pd nanostructures than monolithic Pd, electrodeposited 20 nm Pd discs on Au-NRs are first investigated in terms of their catalytic activity for the hydrogen evolution reaction (HER) and compared to monolithic 20 nm Pd and Pt discs. To further boost performance, the interfacial interaction area between the Au-NRs supports and the active metals (Pt and Pd) was increased via magnetron sputtering an extremely thin layer of Pt and Pd (20 nm overall sputtered thickness) on the Au-NRs after template removal. In this way, the whole NR surface (top and lateral) was covered with Pt and Pd nanoparticles, ensuring a maximum interfacial contact between the support and the active metal. The HER performance obtained was substantially higher than that of the other nanostructures. A Salient result of the present work, however, is the superior activity obtained for sputtered Pd on Au in comparison to that of sputtered Pt on Au. The results also show that increasing the Au-NR length translates in a strong increase in performance. Density functional theory calculations show that the interfacial electronic interactions between Au and Pd lead to suitable values of hydrogen adsorption energy on all possible sites, thus promoting faster (barrier-free diffusion) hydrogen adsorption and its recombination to H2. A Volmer-Heyrovsky mechanism for HER is proposed, and a volcano plot is suggested based on the results of the Tafel plots and the calculated hydrogen adsorption energies.
RESUMEN
The sonochemical processing of nanomaterials in a solution is well established and has been advantageously used for a variety of nanomaterials and morphologies thereof. In general, high energy and high frequency ultrasound is applied to a solution containing the ionic species of the elements to be reduced as well as a certain amount of reducing chemicals. For further applications such as catalysis washing, filtering, dispersion and mounting on or mixing in a substrate are necessary. A sonochemical processing of nanomaterials directly on a substrate could make all these steps obsolete. Herein we show that noble metal and nanoalloy nanoparticles (NPs) can directly be processed on nanocarbon and titanium nitride surfaces using a simple ultrasound laboratory cleaner in aqueous solutions that are free from any reducing chemicals. The process is demonstrated on Au-NPs and nanoalloys of AuPd and PdPt which form a dense distribution on the substrate surface. To illustrate the catalytic activity of the NPs, the electrocatalytic performance of one AuPd-nanoalloy is demonstrated. The results are discussed in terms of reduction phenomena occurring at the interface between the ultrasonic cavitation and the substrate. We think that these reduction phenomena are mediated by the formation of reducing radicals at the substrate surface that are in turn driven by OH radicals from water sonolysis. Electrochemical current measurement at 0â¯V seem to support the existence of reducing currents during measurements under chopped ultrasound in an aqueous solution of HAuCl4 in comparison to measurements in water.
RESUMEN
The data presented in this article affords insight into the fabrication and ensuing microstructure of the supported porous anodic aluminum oxide (AAO) and TiO2-nanotubes (NT) films that are used for the subsequent grafting of antifouling poly(oligo ethyleneglycol) methylether methacrylate (POEGMA) and poly acrylamide (PAAm) brushes. The experimental procedure for the grafting of POEGMA and PAAm via atom transfer radical polymerization (ATRP) is described in Wassel et al. (2019) https://doi.org/10.1016/j.matdes.2018.107542 [1]. The FTIR spectra of the porous oxides before and after attachment of (3-Aminopropyl)trimethoxysilane (APTMS) are presented. Microscopic images of thick POEGMA films and PAAm on AAO are displayed, and an FTIR spectrum of AAO/PAAm is shown. An EDX mapping of carbon is shown on an AAO/POEGMA sample. The adsorption behavior of Fluorescein isothiocyanate (FITC) marked bovine serum albumin (BSA) on patterned porous TiO2-NT films is documented. Finally microscopic images are presented to compare the scratch resistance behavior of pristine porous films with those functionalized with POEGMA.
RESUMEN
Interdiffusion between Si substrate and nanorod arrays of Au, Pt, and AuPt nanoalloys is investigated at temperatures lower than the AuSi eutectic temperature. When the nanorod is pure Au, Si diffusion from the substrate is very rapid. Au atoms are completely replaced by Si, converting the nanostructure into one of Si nanorod arrays. Au is diffused out to the substrate. The Au nanorod arrays on Si are unstable. When the nanorod is pure Pt, however, no diffusion of Si into the nanorod or any silicide formation is observed. The Pt nanorods are stable on Si substrate. When the nanorods are an alloy of AuPt, interesting interactions occur. Si diffusion into the nanorods is rapid but the diffusing Si readily reacts with Pt forming PtSi while Au diffuses out to the substrate. After annealing, nanophases of Au, Pt, PtSi, and Si may be present within the nanorods. When the Pt content of the alloy is low (12 at%) all Pt atoms are converted to silicide and the extra Si atoms remain in elemental form, particularly near the tip of the nanorods. Hence, the presence of Au accelerates Si diffusion and the ensuing reaction to form PtSi, a phenomenon absents in pure Pt nanorods. When the Au content of the alloy is low, the Si diffusion would cease when all Au atoms have diffused out of the nanorod, thereby arresting the silicide formation resulting in excess Pt in elemental form within the nanorod. This is a technique of making Si nanorods with and without embedded PtSi nanophase consisting of heterojunctions which could have unique properties.