Quantitation of Atmospheric Suspended Polystyrene Nanoplastics by Active Sampling Prior to Pyrolysis-Gas Chromatography-Mass Spectrometry.

Plastic has been demonstrated to release nanoplastics (NPs) into the atmosphere under sunlight irradiation, posing a continuous health risk to the respiratory system. However, due to lack of reliable quantification methods, the occurrence and distribution of NPs in the atmosphere remain unclear. Polystyrene (PS) micro- and nanoplastics (MNPs) represent a crucial component of atmospheric MNPs. In this study, we proposed a simple and robust method for determining the concentration of atmospheric PS NPs using pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS). Following active sampling, the filter membrane is directly ground and introduced into the Py-GC/MS system to quantify PS NPs. The proposed method demonstrates excellent reproducibility and high sensitivity, with a detection limit as low as down to 15 pg/m3 for PS NPs. By using this method, the occurrence of PS NPs in both indoor and outdoor atmospheres has been confirmed. Furthermore, the results showed that the abundance of outdoor PS NPs was significantly higher than that of indoor samples, and there was no significant difference in NP vertical distribution within a height of 28.6 m. This method can be applied for the routine monitoring of atmospheric PS NPs and for evaluating their risk to human health.

Extraction of Common Small Microplastics and Nanoplastics Embedded in Environmental Solid Matrices by Tetramethylammonium Hydroxide Digestion and Dichloromethane Dissolution for Py-GC-MS Determination.

Determination of microplastics and nanoplastics (MNPs), especially small MPs and NPs (<150 µm), in solid environmental matrices is a challenging task due to the formation of stable aggregates between MNPs and natural colloids. Herein, a novel method for extracting small MPs and NPs embedded in soils/sediments/sludges has been developed by combining tetramethylammonium hydroxide (TMAH) digestion with dichloromethane (DCM) dissolution. The solid samples were digested with TMAH, and the collected precipitate was washed with anhydrous ethanol to eliminate the natural organic matter. Then, the MNPs in precipitate were extracted by dissolving in DCM under ultrasonic conditions. Under the optimized digestion and extraction conditions, the factors including sizes and concentrations of MNPs showed insignificant effects on the extraction process. The feasibility of this sample preparation method was verified by the satisfactory spiked recoveries (79.6-91.4%) of polystyrene, polyethylene, polypropylene, poly(methyl methacrylate), polyvinyl chloride, and polyethylene terephthalate MNPs in soil/sediment/sludge samples. The proposed sample preparation method was coupled with pyrolysis gas chromatography-mass spectrometry to determine trace small MPs and NPs with a relatively low detection limit of 2.3-29.2 µg/g. Notably, commonly used MNPs were successfully detected at levels of 4.6-51.4 µg/g in 6 soil/sediment/sludge samples. This proposed method is promising for evaluating small solid-embedded MNP pollution.

Coating zirconium oxide-nanocomposite with humic acid for recovery of mercury and chromium in hazardous waste of chemical oxygen demand test.

Hazardous waste of chemical oxygen demand (COD) test (HWCOD) is one of the most common laboratory wastewaters, containing large amounts of H2SO4 and highly toxic Cr3+ and Hg2+. Current treatment methods suffered from incomplete removal of Cr3+ and high-cost. Herein, a humic acid-coated zirconium oxide-resin nanocomposite (HA-HZO-201) was fabricated for efficient recovery of Cr3+ and Hg2+ in HWCOD. The synthesized HA-HZO-201 shows excellent tolerance to wide pH range (1-5) and high salinity (3.5 mol/L NaCl), as well as adsorption capacity for Cr3+ (37.5 mg/g) and Hg2+ (121.3 mg/g). After treating with HA-HZO-201 by using a fixed-bed adsorption procedure, the final Cr3+ and Hg2+ concentrations in HWCOD decreased to 0.28 and 0.02 mg/L, respectively. In addition, the HA-HZO-201 can be regenerated by desorption and recovery of Cr3+ and Hg2+ using HNO3 and thiourea as eluents, respectively. After 5 cycles of adsorption/desorption, the removal efficiencies still reach up to 86.0% for Cr3+ and 89.7% for Hg2+, indicating an excellent regeneration of HA-HZO-201. We hope this work open new opportunities for treatment of HWCOD with high-efficiency and low-cost.

Total Organic Carbon as a Quantitative Index of Micro- and Nano-Plastic Pollution.

The global pollution of micro- and nano-plastics (MNPs) calls for monitoring methods. As diverse mixtures of various sizes, morphologies, and chemical compositions in the environment, MNPs are currently quantified based on mass or number concentrations. Here, we show total organic carbon (TOC) as an index for quantifying the pollution of total MNPs in environmental waters. Two parallel water samples are respectively filtered with a carbon-free glass fiber membrane. Then, one membrane with the collected particulate substances is treated by potassium peroxodisulfate oxidation and Fenton digestion in sequence for quantifying the sum of MNPs and particulate black carbon (PBC) as TOCMNP&PBC using a TOC analyzer, another membrane is treated by sulfonation and Fenton digestion for quantifying PBC as TOCPBC, and the TOC of MNPs is calculated by subtracting TOCPBC from TOCMNP&PBC. The feasibility of our method is demonstrated by determination of various MNPs of representative plastic types and sizes (0.5-100 µm) in tap, river, and sea water samples, with low detection limits (∼7 µg C L-1) and high spiked recoveries (83.7-114%). TOC is a powerful index for routine monitoring of MNP pollution.

Swelling-Induced Fragmentation and Polymer Leakage of Nanoplastics in Seawater.

Nanoplastics (NPs) have been successively detected in different environmental matrixes and have aroused great concern worldwide. However, the fate of NPs in real environments such as seawater remains unclear, impeding their environmental risk assessment. Herein, multiple techniques were employed to monitor the particle number concentration, size, and morphology evolution of polystyrene NPs in seawater under simulated sunlight over a time course of 29 days. Aggregation was found to be a continuous process that occurred constantly and was markedly promoted by light irradiation. Moreover, the occurrence of NP swelling, fragmentation, and polymer leaching was evidenced by both transmission electron microscopy and scanning electron microscopy techniques. The statistical results of different transformation types suggested that swelling induces fragmentation and polymer leakage and that light irradiation plays a positive but not decisive role in this transformation. The observation of fragmentation and polymer leakage of poly(methyl methacrylate) and poly(vinyl chloride) NPs suggests that these transformation processes are general for NPs of different polymer types. Facilitated by the increase of surface functional groups, the ions in seawater could penetrate into NPs and then stretch the polymer structure, leading to the swelling phenomenon and other transformations.

Evaluating the Occurrence of Polystyrene Nanoparticles in Environmental Waters by Agglomeration with Alkylated Ferroferric Oxide Followed by Micropore Membrane Filtration Collection and Py-GC/MS Analysis.

Although nanoplastics (NPs) are recognized as emerging anthropogenic particulate pollutants, the occurrence of NPs in the environment is rarely reported, partly due to the lack of sensitive methods for the concentration and detection of NPs. Herein, we present an efficient method for enriching NPs of different compositions and various sizes. Alkylated ferroferric oxide (Fe3O4) particles were prepared as adsorbents for highly efficient capture of NPs in environmental waters, and the formed large Fe3O4-NP agglomerates were separated by membrane filtration. Detection limits of 0.02-0.03 µg/L were obtained for polystyrene (PS) and poly(methyl methacrylate) (PMMA) NPs by detection with pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS). When analyzing real water samples from different sources, it is remarkable that PS NPs were detected in 11 out of 15 samples with concentrations ranging from <0.07 to 0.73 µg/L, while PMMA were not detected. The wide detection of PS NPs in our study confirms the previous speculation that NPs may be ubiquitous in the environmental waters. The accurate quantification of PS NPs in environmental waters make it possible to monitor the pollution status of NPs in aquatic systems and evaluate their potential risks.

Monitoring the Cd2+ release from Cd-containing quantum dots in simulated body fluids by size exclusion chromatography coupled with ICP-MS.

Quantification of Cd2+ release from Cd-containing quantum dots (QDs) is of fundamental importance to elucidate its toxicity to organisms, but remains a great challenge due to the lack of appropriate analytical method. Herein, a facile method based on size exclusion chromatography (SEC) combined with inductively coupled plasma mass spectrometry (ICP-MS) was developed for separating and quantifying the QDs and counterpart ions. By using the mixture of sodium dodecyl sulfate (SDS) and ethylenediaminetetraacetic acid tetrasodium salt (EDTA) as the mobile phase, the defect of QD and ion adsorption onto the SEC column was overcome, thus realizing the accurate quantification of ionic species. Besides, the concentration of QDs was achieved through subtracting the ion concentration from the total concentration. Selecting CdSe@ZnS as the typical QDs, the Cd2+ release process in four typical simulated body fluids, namely, simulated gastric fluid, simulated sweat, Gamble's solution, and artificial lysosomal fluid, was monitored using the developed SEC-ICP-MS method. The media pH is identified as the decisive factor which controls the dissolution of ZnS shells and also the Cd2+ release kinetics and final concentration. Our results suggest that the oral pathway for QD uptake poses the biggest risk to human health.

Digestive Elimination of Coexisting Microplastics for Determination of Particulate Black Carbon in Environmental Waters.

Determination of particulate black carbon (PBC) in the environment is of great importance but faces a new challenge due to the increasing occurrence of coexisting microplastics (MPs), which are an emerging contaminant with properties very similar to those of PBC and cannot be discriminated in the chemical digestion procedure of the reported PBC analysis method. Herein, a comprehensive method has been developed for accurately determining PBC by digestive elimination of the coexisting MPs and other non-black carbon organic matter. Water samples were filtered with a glass fiber membrane (0.3 µm pore size), and the collected substances with the membrane were subjected to sulfonation with chlorosulfonic acid and Fenton digestion in sequence and then to the total organic carbon analyzer for quantification of PBC. Under the optimized conditions, MPs of various sizes and polymer types were efficiently eliminated (>91.0%), whereas various PBC samples were undigested with recoveries over 91.7% except for the relatively low recovery of 65.6% for the PBC prepared at a low pyrolysis temperature of 400 °C. The feasibility of the proposed method was verified by analysis of real water samples with a spike recovery of 88.6-100.2%. We anticipate that this work will pave an avenue for reliable determination of PBC in the presence of MPs.

Sequential Isolation of Microplastics and Nanoplastics in Environmental Waters by Membrane Filtration, Followed by Cloud-Point Extraction.

Respective detection of microplastics (MPs) and nanoplastics (NPs) is of great importance for their different environmental behaviors and toxicities. Using spherical polystyrene (PS) and poly(methyl methacrylate) (PMMA) plastics as models, the efficiency for sequential isolation of MPs and NPs by membrane filtration and cloud-point extraction was evaluated. After filtering through a glass membrane (1 µm pore size), over 90.7% of MPs were trapped on the membrane, whereas above 93.0% of NPs remained in the filtrate. The collected MPs together with the glass membrane were frozen in liquid nitrogen, ground, and suspended in water (1 mL) and subjected to pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) determination. The NPs in the filtrate were concentrated by cloud-point extraction, heated at 190 °C to degrade the extractant, and then determined by Py-GC/MS. For MPs and NPs spiked in pure water, the method detection limits are in the range of 0.05-1.9 µg/L. The proposed method is applied to analyze four real water samples, with the detection of 1.6-7.6 µg/L PS MPs and 0.6 µg/L PMMA MPs in three samples, and spiked recoveries of 75.0-102% for MPs and 67.8-87.2% for NPs. Our method offers a novel sample pretreatment approach for the respective determination of MPs and NPs.

Counting Nanoplastics in Environmental Waters by Single Particle Inductively Coupled Plasma Mass Spectroscopy after Cloud-Point Extraction and In Situ Labeling of Gold Nanoparticles.

The globally raising concern for nanoplastics (NPs) pollution calls for analytical methods for investigating their occurrence, fates, and effects. Counting NPs with sizes down to 50 nm in real environmental waters remains a great challenge. Herein, we developed a full method from sample pretreatment to quantitative detection for NPs in environmental waters. Various NPs of common plastic types and sizes (50-1200 nm) were successfully labeled by in situ growth of gold nanoparticles and counted by single particle inductively coupled plasma mass spectrometry. Sucrose density gradient centrifugation enables the isolation of gold-labeled NPs from homogeneously nucleated Au nanoparticles, enhancing the particle number detection limit to 4.6 × 108 NPs/L for 269 nm spherical polystyrene NPs. For real environmental water samples, the pretreatment of acid digestion with a mixture of 5 mM HNO3 and 40 mM HF eliminates the coexisting inorganic nanoparticles, while the following dual cloud-point extraction efficiently isolates NPs from various matrices and thus improves the Au-labeling efficiency. The high spiked recoveries (72.9%-92.8%) of NPs in different waters demonstrated the applicability of this method in different scenarios.

Supplementation of Bacillus sp. DU-106 reduces hypercholesterolemia and ameliorates gut dysbiosis in high-fat diet rats.

Gut microbiota modulation by a probiotic is a novel therapy for hypercholesterolemia mitigation. This study initially investigated the potential hypocholesterolemic effect of Bacillus sp. DU-106 in hypercholesterolemic rats and explored its potential relation with gut microbiota. Sprague-Dawley rats received a high-fat diet, or a high-fat diet supplemented with 7.5 × 109 and 1.5 × 1010 CFU/kg bw/day Bacillus sp. DU-106 (low-dose and high-dose groups). At the end of 9 weeks, Bacillus sp. DU-106 treatment significantly decreased the body weight, liver index, and total cholesterol. 16S rRNA sequencing showed that Bacillus sp. DU-106 intervention significantly increased bacterial richness and particularly increased the genus abundance of Turicibacter, Acinetobacter, Brevundimonas, and Bacillus and significantly decreased the abundance of Ralstonia. Metabolomic data further indicated that the supplementation of Bacillus sp. DU-106 remarkably changed the gut metabolic profiles of hypercholesterolemic rats and, in particular, elevated the metabolites of indole-3-acetate, methylsuccinic acid, creatine, glutamic acid, threonine, lysine, ascorbic acid, and pyridoxamine. Spearman's correlation analysis showed the close relation between the different genera and metabolites. In conclusion, Bacillus sp. DU-106 supplement ameliorated high-fat diet-induced hypercholesterolemia and showed potential probiotic benefits for the intestine. KEY POINTS: • A novel potential probiotic Bacillus sp. DU-106 ameliorated hypercholesterolemia in rats. • Bacillus sp. DU-106 supplement regulated gut microbiome structure and richness. • Bacillus sp. DU-106 supplement changed metabolic profiles in high-fat diet rats. • Significant correlations were observed between differential genera and metabolites.

Speciation Analysis of the Uptake and Biodistribution of Nanoparticulate and Ionic Silver in Escherichia coli.

A new method was developed to determine the nanoparticulate and ionic silver (Ag) species in bacteria (Escherichia coli, E. coli). By removal of the cell wall with lysozyme, the cell surface-adsorbed Ag species were separated from the intracellular Ag species, which were extracted by tetramethylammonium hydroxide and determined by size-exclusion chromatography coupled with inductively coupled plasma mass spectrometry (SEC-ICP-MS). The detection limit is 3 ng/107 CFU/mL (where CFU is colony-forming unit) for both silver nanoparticles (AgNPs) and ionic Ag(I) species. The cell wall-adsorbed Ag was calculated by subtracting the contents of the intra- and extracellular Ag from the total exposure dose of Ag, and therefore the biodistribution of Ag species was profiled. We then applied this strategy to quantitatively analyze extra- and intracellular Ag species in E. coli after respective exposure to Ag+ and 10 and 30 nm AgNPs at different effective concentrations (EC10, EC50, and EC90). Results showed that the intracellular and cell wall-bound Ag account for 5.98-15.21% and 25.13-64.43% of the exposed dose, respectively, and AgNPs could transform into complexed or free Ag+. Our method opens new avenues for the quantitative analysis of the uptake and biodistribution of nanoparticles and their transformation species in bacteria.

Intracellular Dissolution of Silver Nanoparticles: Evidence from Double Stable Isotope Tracing.

To track transformations of silver nanoparticles (AgNPs) in vivo, HepG2 and A549 cells were cocultured with two enriched stable Ag isotopes (107AgNPs and 109AgNO3) at nontoxic doses. After enzymatic digestion, 107AgNPs, ionic 107Ag+ and 109Ag+ in exposed cells could be separated and quantified by liquid chromatography combined with ICP-MS. We found that ratios of 107Ag+ to total 107Ag and proportions of 107Ag+/ 109Ag+ in cells increased gradually after exposure, proving that the Trojan-horse mechanism occurred, i.e., AgNPs released high contents of Ag+ after internalization. While the presence of 109Ag+ (5 and 100 µg/L) has little influence on the uptake of 107AgNPs (0.1 and 2 mg/L), the presence of 107AgNPs at a high dose (2 mg/L) dramatically increases the ingestion of 109Ag+, even though 107AgNPs at a low dose (100 µg/L) showed negligible effects on the internalization of 109Ag+. Cellular homeostasis may be perturbed under sublethal exposure of 107AgNPs, and thus enhanced uptake of 109Ag+. Our findings suggest that the widely adopted control experiments in toxicology studies, culturing organisms with AgNO3 at the same concentration of Ag+ in the AgNP exposure medium, may underestimate uptake of Ag+ and thus cannot exclude suspected toxic effects of Ag+ at high AgNP exposure doses.

Defect Sites in Ultrathin Pd Nanowires Facilitate the Highly Efficient Electrochemical Hydrodechlorination of Pollutants by H*ads.

Adsorbed atomic H (H*ads) facilitates indirect pathways playing a major role in the electrochemical removal of various priority pollutants. It is crucial to identify the atomic sites responsible for the provision of H*ads. Herein, through a systematic study of the distribution of H*ads on Pd nanocatalysts with different sizes and, more importantly, deliberately controlled relative abundance of surface defects, we uncovered the central role of defects in the provision of H*ads. Specifically, the H*ads generated on Pd in an electrochemical process increased markedly upon introducing defect sites by changing the morphology to ultrathin polycrystalline Pd nanowires (NWs), while dramatically reducing upon decreasing the number of surface defects through an annealing treatment. Benefiting from a proportion of H*ads up to 40% of the total H* species, the Pd NWs showed an electrochemical active surface area normalized rate constant of 13.8 ± 0.8 h-1 m-2, which is 8-9 times higher than its Pd/C counterparts. The pivotal role of defect sites for the generation of H*ads was further verified by blocking such sites with Rh and Pt atoms, while theoretical calculation also confirms that the adsorption energy of H*ads on these sites is much higher than that on the Pd{111} facet.

Au@Pd Bimetallic Nanocatalyst for Carbon-Halogen Bond Cleavage: An Old Story with New Insight into How the Activity of Pd is Influenced by Au.

AuPd bimetallic nanocatalysts exhibit superior catalytic performance in the cleavage of carbon-halogen bonds (C-X) in the hazardous halogenated pollutants. A better understanding of how Au atoms promote the reactivity of Pd sites rather than vaguely interpreting as bimetallic effect and determining which type of Pd sites are necessary for these reactions are crucial factors for the design of atomically precise nanocatalysts that make full use of both the Pd and Au atoms. Herein, we systematically manipulated the coordination number of Pd-Pd, d-orbital occupation state, and the Au-Pd interface of the Pd reactive centers and studied the structure-activity relationship of Au-Pd in the catalyzed cleavage of C-X bonds. It is revealed that Au enhanced the activity of Pd atoms primarily by increasing the occupation state of Pd d-orbitals. Meanwhile, among the Pd sites formed on the Au surface, five to seven contiguous Pd atoms, three or four adjacent Pd atoms, and isolated Pd atoms were found to be the most active in the cleavage of C-Cl, C-Br, and C-I bonds, respectively. Besides, neighboring Au atoms directly contribute to the weakening of the C-Br/C-I bond. This work provides new insight into the rational design of bimetallic metal catalysts with specific catalytic properties.

Polyvinylidene Fluoride Micropore Membranes as Solid-Phase Extraction Disk for Preconcentration of Nanoparticulate Silver in Environmental Waters.

Efficient separation and preconcentration of trace nanoparticulate silver (NAg) from large-volume environmental waters is a prerequisite for reliable analysis and therefore understanding the environmental processes of silver nanoparticles (AgNPs). Herein, we report the novel use of polyvinylidene fluoride (PVDF) filter membrane for disk-based solid phase extraction (SPE) of NAg in 1 L of water samples with the disk-based SPE system, which consists of a syringe pump and a syringe filter holder to embed the filter membrane. While the PVDF membrane can selectively adsorb NAg in the presence of Ag+, aqueous solution of 2% (m/v) FL-70 is found to efficiently elute NAg. Analysis of NAg is performed following optimization of filter membrane and elution conditions with an enrichment factor of 1000. Additionally, transmission electron microscopy (TEM), UV-vis spectroscopy, and size-exclusion chromatography coupled with ICP-MS (SEC-ICP-MS) analysis showed that the extraction gives rise to no change in NAg size or shape, making this method attractive for practical applications. Furthermore, feasibility of the protocol is verified by applying it to extract NAg in four real waters with recoveries of 62.2-80.2% at 0.056-0.58 µg/L spiked levels. This work will facilitate robust studies of trace NAg transformation and their hazard assessments in the environment.

Advances in ultrasonic treatment of oily sludge: mechanisms, industrial applications, and integration with combined treatment technologies.

In the petroleum sector, the generation of oily sludge is an unavoidable byproduct, necessitating the development of efficient treatment strategies for both economic gain and the mitigation of negative environmental impacts. The intricate composition of oily sludge poses a formidable challenge, as existing treatment methodologies frequently fall short of achieving baseline disposal criteria. The processes of demulsification and dehydration are integral to diminishing the oil content and reclaiming valuable crude oil, thereby playing a critical role in the management of oily sludge. Among the myriad of treatment solutions, ultrasonic technology has emerged as a particularly effective physical method, celebrated for its diverse applications and lack of resultant secondary pollution. This comprehensive review delves into the underlying mechanisms and recent progress in the ultrasonic treatment of oily sludge, with a specific focus on its industrial implementations within China. Both isolated ultrasonic treatment and its combination with other technological approaches have proven successful in addressing oily sludge challenges. The adoption of industrial-scale systems that amalgamate ultrasound with multi-technological processes has shown marked enhancements in treatment efficacy. The fusion of ultrasonic technology with other cutting-edge methods holds considerable potential across a spectrum of applications. To fulfill the goals of resource recovery, reduction, and neutralization in oily sludge management, the industrial adoption and adept application of a variety of treatment technologies are imperative.

Protocol for detecting micro(nano)plastics released from intravenous infusion products.

Approaches for detecting micro(nano)plastics (MNPs) released from intravenous infusion products (IVIPs) are vital for evaluating the safety of both IVIPs and their derived MNPs on human health, yet current understanding is limited. Here, we present a protocol for detecting polyvinyl chloride (PVC) MNPs by combining Raman spectroscopy, scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy (SEM-EDS), and pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). We describe steps for collecting, pretreating, and measuring PVC MNPs released from IVIPs. For complete details on the use and execution of this protocol, please refer to Li et al.1.

Deciphering Vanadium Speciation in Smelting Ash and Adaptive Responses of Soil Microorganisms.

Abundant smelting ash is discharged during pyrometallurgical vanadium (V) production. However, its associated V speciation and resultant ecological impact have remained elusive. In this study, V speciation in smelting ash and its influence on the metabolism of soil microorganisms were investigated. Smelting ashes from V smelters contained abundant V (19.6-115.9 mg/g). V(V) was the dominant species for soluble V, while solid V primarily existed in bioavailable forms. Previously unrevealed V nanoparticles (V-NPs) were prevalently detected, with a peak concentration of 1.3 × 1013 particles/g, a minimal size of 136.0 ± 0.6 nm, and primary constituents comprising FeVO4, VO2, and V2O5. Incubation experiments implied that smelting ash reshaped the soil microbial community. Metagenomic binning, gene transcription, and component quantification revealed that Microbacterium sp. and Tabrizicola sp. secreted extracellular polymeric substances through epsB and yhxB gene regulation for V-NPs aggregation to alleviate toxicity under aerobic operations. The V K-edge X-ray absorption near-edge structure (XANES) spectra suggested that VO2 NPs were oxidized to V2O5 NPs. In the anaerobic case, Comamonas sp. and Achromobacter sp. reduced V(V) to V(IV) for detoxification regulated by the napA gene. This study provides a deep understanding of the V speciation in smelting ash and microbial responses, inspiring promising bioremediation strategies to reduce its negative environmental impacts.

Nanoparticulate pollutants in the environment: Analytical methods, formation, and transformation.

The wide application of nanomaterials and plastic products generates a substantial number of nanoparticulate pollutants in the environment. Nanoparticulate pollutants are quite different from their bulk counterparts because of their unique physicochemical properties, which may pose a threat to environmental organisms and human beings. To accurately predict the environmental risks of nanoparticulate pollutants, great efforts have been devoted to developing reliable methods to define their occurrence and track their fate and transformation in the environment. Herein, we summarized representative studies on the preconcentration, separation, formation, and transformation of nanoparticulate pollutants in environmental samples. Finally, some perspectives on future research directions are proposed.