Three-Dimensional Electrical Control of the Excitonic Fine Structure for a Quantum Dot in a Cavity.

The excitonic fine structure plays a key role for the quantum light generated by semiconductor quantum dots, both for entangled photon pairs and single photons. Controlling the excitonic fine structure has been demonstrated using electric, magnetic, or strain fields, but not for quantum dots in optical cavities, a key requirement to obtain high source efficiency and near-unity photon indistinguishability. Here, we demonstrate the control of the fine structure splitting for quantum dots embedded in micropillar cavities. We propose and implement a scheme based on remote electrical contacts connected to the pillar cavity through narrow ridges. Numerical simulations show that such a geometry allows for a three-dimensional control of the electrical field. We experimentally demonstrate tuning and reproducible canceling of the fine structure, a crucial step for the reproducibility of quantum light source technology.

Fiber-based angular filtering for high-resolution Brillouin spectroscopy in the 20-300†GHz frequency range.

Brillouin spectroscopy emerges as a promising non-invasive tool for nanoscale imaging and sensing. One-dimensional semiconductor superlattice structures are eminently used for selectively enhancing the generation or detection of phonons at few GHz. While commercially available Brillouin spectrometers provide high-resolution spectra, they consist of complex experimental techniques and are not suitable for semiconductor cavities operating at a wide range of optical wavelengths. We develop a pragmatic experimental approach for conventional Brillouin spectroscopy that can integrate a widely tunable excitation-source. Our setup combines a fibered-based angular filtering and a spectral filtering based on a rotating single etalon and a double grating spectrometer for sequential reconstruction of Brillouin spectra. This configuration allows probing confined acoustic phonon modes in the 20-300 GHz frequency range with excellent laser rejection and high spectral resolution. Remarkably, our scheme based on the excitation and collection of the enhanced Brillouin scattering signals through the optical cavity allows for better angular filtering with decreasing phonon frequency. It can be implemented for the study of cavity optomechanics and stimulated Brillouin scattering over broadband optical and acoustic frequency ranges.

Anderson Photon-Phonon Colocalization in Certain Random Superlattices.

Fundamental observations in physics ranging from gravitational wave detection to laser cooling of a nanomechanical oscillator into its quantum ground state rely on the interaction between the optical and the mechanical degrees of freedom. A key parameter to engineer this interaction is the spatial overlap between the two fields, optimized in carefully designed resonators on a case-by-case basis. Disorder is an alternative strategy to confine light and sound at the nanoscale. However, it lacks an a priori mechanism guaranteeing a high degree of colocalization due to the inherently complex nature of the underlying interference processes. Here, we propose a way to address this challenge by using GaAs/AlAs vertical distributed Bragg reflectors with embedded geometrical disorder. Because of a remarkable coincidence in the physical parameters governing light and motion propagation in these two materials, the equations for both longitudinal acoustic waves and normal-incidence light become practically equivalent for excitations of the same wavelength. This guarantees spatial overlap between the electromagnetic and displacement fields of specific photon-phonon pairs, leading to strong light-matter interaction. In particular, a statistical enhancement in the vacuum optomechanical coupling rate, g_{o}, is found, making this system a promising candidate to explore Anderson localization of high frequency (∼20 GHz) phonons enabled by cavity optomechanics. The colocalization effect shown here unlocks the access to unexplored localization phenomena and the engineering of light-matter interactions mediated by Anderson-localized states.

Optomechanical properties of GaAs/AlAs micropillar resonators operating in the 18 GHz range.

Recent experiments demonstrated that GaAs/AlAs based micropillar cavities are promising systems for quantum optomechanics, allowing the simultaneous three-dimensional confinement of near-infrared photons and acoustic phonons in the 18-100 GHz range. Here, we investigate through numerical simulations the optomechanical properties of this new platform. We evidence how the Poisson's ratio and semiconductor/vacuum boundary conditions lead to very distinct features in the mechanical and optical three-dimensional confinement. We find a strong dependence of the mechanical quality factor and strain distribution on the micropillar radius, in great contrast to what is predicted and observed in the optical domain. The derived optomechanical coupling constants g0 reach ultra-large values in the 106 rad/s range.

Micropillar Resonators for Optomechanics in the Extremely High 19-95-GHz Frequency Range.

Strong confinement, in all dimensions, and high mechanical frequencies are highly desirable for quantum optomechanical applications. We show that GaAs/AlAs micropillar cavities fully confine not only photons but also extremely high frequency (19-95 GHz) acoustic phonons. A strong increase of the optomechanical coupling upon reducing the pillar size is observed, together with record room-temperature Q-frequency products of 10^{14}. These mechanical resonators can integrate quantum emitters or polariton condensates, opening exciting perspectives at the interface with nonlinear and quantum optics.

Strong optical-mechanical coupling in a vertical GaAs/AlAs microcavity for subterahertz phonons and near-infrared light.

We show that distributed Bragg reflector GaAs/AlAs vertical cavities designed to confine photons are automatically optimal to confine phonons of the same wavelength, strongly enhancing their interaction. We study the impulsive generation of intense coherent and monochromatic acoustic phonons by following the time evolution of the elastic strain in picosecond-laser experiments. Efficient optical detection is assured by the strong phonon backaction on the high-Q optical cavity mode. Large optomechanical factors are reported (~THz/nm range). Pillar cavities based in these structures are predicted to display picogram effective masses, almost perfect sound extraction, and threshold powers for the stimulated emission of phonons in the range µW-mW, opening the way for the demonstration of phonon "lasing" by parametric instability in these devices.

Probing gigahertz coherent acoustic phonons in TiO2 mesoporous thin films.

Ultrahigh-frequency acoustic-phonon resonators usually require atomically flat interfaces to avoid phonon scattering and dephasing, leading to expensive fabrication processes, such as molecular beam epitaxy. Mesoporous thin films are based on inexpensive wet chemical fabrication techniques that lead to relatively flat interfaces regardless the presence of nanopores. Here, we report mesoporous titanium dioxide-based acoustic resonators with resonances up to 90 GHz, and quality factors from 3 to 7. Numerical simulations show a good agreement with the picosecond ultrasonics experiments. We also numerically study the effect of changes in the speed of sound on the performance of the resonator. This change could be induced by liquid infiltration into the mesopores. Our findings constitute the first step towards the engineering of building blocks based on mesoporous thin films for reconfigurable optoacoustic sensors.

Reflective interferometry for optical metamaterial phase measurements.

The unambiguous determination of optical refractive indices of metamaterials is a challenging task for device applications and the study of new optical phenomena. We demonstrate here simple broadband phase measurements of metamaterials using spectrally and spatially resolved interferometry. We study the phase response of a π-shaped metamaterial known to be an analog to electromagnetically induced transparency. The measured broadband interferograms give the phase delay or advance produced by the metamaterial in a single measurement. The presented technique offers an effective way of characterizing optical metamaterials including nonlinear and gain-metamaterial systems.

Bloch oscillations of THz acoustic phonons in coupled nanocavity structures.

Nanophononic Bloch oscillations and Wannier-Stark ladders have been recently predicted to exist in specifically tailored structures formed by coupled nanocavities. Using pump-probe coherent phonon generation techniques we demonstrate that Bloch oscillations of terahertz acoustic phonons can be directly generated and probed in these complex nanostructures. In addition, by Fourier transforming the time traces we had access to the proper eigenmodes in the frequency domain, thus evidencing the related Wannier-Stark ladder. The observed Bloch oscillation dynamics are compared with simulations based on a model description of the coherent phonon generation and photoelastic detection processes.

Enhancement and inhibition of coherent phonon emission of a Ni film in a BaTiO3/SrTiO3 cavity.

We report pump-probe time resolved reflectivity experiments in a hybrid air-Ni metal-BaTiO(3)/SrTiO(3) oxide mirror phonon cavity. We demonstrate that the generated coherent acoustic phonon spectra of the impulsively excited metallic film can be inhibited or enhanced in the phonon cavity with respect to a Ni film directly grown on a SrTiO(3) substrate. The experiments are compared with simulations that highlight the role of the phonon density of states in the coherent acoustic emission, extending concepts at the base of the optical Purcell effect to the field of phononics.

Coherent manipulation of a solid-state artificial atom with few photons.

In a quantum network based on atoms and photons, a single atom should control the photon state and, reciprocally, a single photon should allow the coherent manipulation of the atom. Both operations require controlling the atom environment and developing efficient atom-photon interfaces, for instance by coupling the natural or artificial atom to cavities. So far, much attention has been drown on manipulating the light field with atomic transitions, recently at the few-photon limit. Here we report on the reciprocal operation and demonstrate the coherent manipulation of an artificial atom by few photons. We study a quantum dot-cavity system with a record cooperativity of 13. Incident photons interact with the atom with probability 0.95, which radiates back in the cavity mode with probability 0.96. Inversion of the atomic transition is achieved for 3.8 photons on average, showing that our artificial atom performs as if fully isolated from the solid-state environment.

Towards GHz-THz cavity optomechanics in DBR-based semiconductor resonators.

Resonators based on acoustic distributed Bragg reflectors (DBRs) were optimized to work in the GHz-THz regime, and grown by molecular beam epitaxy. We show that in structures made of GaAlAs alloys a simultaneous optimal confinement of light in the visible range and phonons in the tens of GHz range can be achieved. We report time resolved differential optical reflectivity experiments performed with fs-ps laser pulses. The experimental results are in excellent agreement with simulations based on standard transfer matrix methods. The resonant behavior of the photoelastic coefficient is discussed. The perfect optic-acoustic mode overlapping, added to a strongly enhanced coupling mechanism, implies that these DBR-based cavities could be the base of highly efficient optomechanical resonators.

Ultrafast acousto-plasmonic control and sensing in complex nanostructures.

Coherent acoustic phonons modulate optical, electronic and mechanical properties at ultrahigh frequencies and can be exploited for applications such as ultratrace chemical detection, ultrafast lasers and transducers. Owing to their large absorption cross-sections and high sensitivities, nanoplasmonic resonators are used to generate coherent phonons up to terahertz frequencies. Generating, detecting and controlling such ultrahigh frequency phonons has been a topic of intense research. Here we report that by designing plasmonic nanostructures exhibiting multimodal phonon interference, we can detect the spatial properties of complex phonon modes below the optical wavelength through the interplay between plasmons and phonons. This allows detection of complex nanomechanical dynamics by polarization-resolved transient absorption spectroscopy. Moreover, we demonstrate that the multiple vibrational states in nanostructures can be tailored by manipulating the geometry and dynamically selected by acousto-plasmonic coherent control. This allows enhancement, detection and coherent generation of tunable strains using surface plasmons.

Coherent generation of acoustic phonons in an optical microcavity.

Ultrafast coherent generation of acoustic phonons is studied in a semiconductor optical microcavity. The confinement of the light pulse amplifies both the generation and the detection of phonons. In addition, the standing wave character of the photon field modifies the generation and detection phonon bandwidth. Coherent generation experiments in an acoustic nanocavity embedded in an optical microcavity are reported as a function of laser energy and incidence angle to evidence the separate role of the optical and exciton resonances. Amplified signals and phonon spectra modified by the optical confinement are demonstrated.

Subterahertz phonon dynamics in acoustic nanocavities.

We report a direct determination of the dynamic behavior of confined acoustic phonons in nanocavities by picosecond acoustics. We provide the broadband, high resolution transmission amplitude curve in the subterahertz range, and we give evidence of resonant transmission peaks in three successive stop bands, in quantitative agreement with acoustic simulations. We furthermore demonstrate transit times in the nanosecond range at the cavity peaks reflecting the strong confinement of resonant phonons within the cavity layer. On the other hand, picosecond transit times are measured in the stop band, shorter than in any of the constituting materials, a tunneling effect well known both in photonic crystals and in macroscopic phononic systems.

Probing nanoscale ferroelectricity by ultraviolet Raman spectroscopy.

We demonstrated that ultraviolet Raman spectroscopy is an effective technique to measure the transition temperature (Tc) in ferroelectric ultrathin films and superlattices. We showed that one-unit-cell-thick BaTiO3 layers in BaTiO3/SrTiO3 superlattices are not only ferroelectric (with Tc as high as 250 kelvin) but also polarize the quantum paraelectric SrTiO3 layers adjacent to them. Tc was tuned by approximately 500 kelvin by varying the thicknesses of the BaTiO3 and SrTiO3 layers, revealing the essential roles of electrical and mechanical boundary conditions for nanoscale ferroelectricity.